Where does the ribbon cable attach on the board on hp vs 17x and how
How does the ribbon cable attach to the circuit board and how
Hi,
The best you can get:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=1151511&
Nowadays people won't repair monitors, buying a new one is much cheaper in the long run.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
Where to find ribbon cable retainer clips?
Picking up from another thread [thanks to Hardy for his clue]. I've a broken retainer clip for the trackpad ribbon cable...the ridiculously tiny and fragile little plastic wedge isn't keeping the cable tightly connected to the logic board, so it won't start up.
Where can I order a replacement?Having bypassed Apple techs who suffer from learned helplessness and transcended mysterious generalizations, I have fixed the problem. But it took a little patience and creativity. The fix involves a single overhead transparency sheet, some scissors, a little scotch tape, and Brian Eno music.
I took an acetate sheet...the plastic sheet one writes on in using an overhead projector, cut "T" shaped pieces, and layered them together. Depending on the ribbon connector...there were two I specifically had to shore up: the trackpad connector and the USB board connector, I used 5 and 3 layers, respectively, get the ribbon cables in...and snugly. A little tape here and there between layers should prevent movement for a while. Remember: The retainer clip is a little wedge-type thing with hooks on either side that keep the ribbon cable seated against the logic board connector. The layers of razor-thin acetate, put together and anchored with a little tape, add up to something just slightly thicker than the original retainer clip.
What amazes me is that these tiny little things are made of fairly brittle plastic and so HARD to find. Not even Apple seems to know where they are. They're probably made in China with a lot of lead in them to boot.
This worked like a charm, thanks to 3M; no thanks to Apple-trained techs who told me to "Google" it. -
Where does flex builder keep refererences to the flex projects?
Where does flex builder keep refererences to the flex projects?
I'm getting an error like this on FB3 startup:
The folder PR System Intranet does not exist in the workspace so the reference must be somewhere else.
thanks
!SESSION 2009-11-02 09:47:52.203 -----------------------------------------------
eclipse.buildId=unknown
java.version=1.5.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_GB
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.core.resources 2 10035 2009-11-02 09:47:53.610
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
!ENTRY org.eclipse.core.resources 4 567 2009-11-02 09:47:53.829
!MESSAGE Workspace restored, but some problems occurred.
!SUBENTRY 1 org.eclipse.core.resources 4 567 2009-11-02 09:47:53.829
!MESSAGE Could not read metadata for 'PR System Intranet'.
!STACK 1
org.eclipse.core.internal.resources.ResourceException: The project description file (.project) for 'PR System Intranet' is missing. This file contains important information about the project. The project will not function properly until this file is restored.
at org.eclipse.core.internal.localstore.FileSystemResourceManager.read(FileSystemResourceMan ager.java:663)
at org.eclipse.core.internal.resources.SaveManager.restoreMetaInfo(SaveManager.java:792)
at org.eclipse.core.internal.resources.SaveManager.restoreMetaInfo(SaveManager.java:772)
at org.eclipse.core.internal.resources.SaveManager.restore(SaveManager.java:663)
at org.eclipse.core.internal.resources.SaveManager.startup(SaveManager.java:1319)
at org.eclipse.core.internal.resources.Workspace.startup(Workspace.java:1949)
at org.eclipse.core.internal.resources.Workspace.open(Workspace.java:1713)
at org.eclipse.core.resources.ResourcesPlugin.start(ResourcesPlugin.java:363)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:9 99)
at java.security.AccessController.doPrivileged(Native Method)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextIm pl.java:993)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:9 74)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:346)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:260)
at org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:400)
at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:111)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :417)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:189)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findLocalClass(BundleLoader.java:34 0)
at org.eclipse.osgi.framework.internal.core.SingleSourcePackage.loadClass(SingleSourcePackag e.java:37)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java :405)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:83)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at com.adobe.flexbuilder.standalone.FlexBuilderApplication.start(FlexBuilderApplication.java :111)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:106)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:76)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
at org.eclipse.equinox.launcher.Main.main(Main.java:1148)
!SUBENTRY 2 org.eclipse.core.resources 4 567 2009-11-02 09:47:53.829
!MESSAGE The project description file (.project) for 'PR System Intranet' is missing. This file contains important information about the project. The project will not function properly until this file is restored.
!ENTRY org.eclipse.osgi 4 0 2009-11-02 09:47:53.860
!MESSAGE An error occurred while automatically activating bundle org.eclipse.core.resources (161).
!STACK 0Thanks but that file contains things like
<?xml version="1.0" encoding="UTF-8"?>
<actionScriptProperties mainApplicationPath="main.mxml" version="3">
<compiler additionalCompilerArguments="-services "X:\Coldfusion9\wwwroot\WEB-INF\flex\services-config.xml" -locale en_US" copyDependentFiles="true" enableModuleDebug="true" flexSDK="Flex 3.2" generateAccessible="true" htmlExpressInstall="true" htmlGenerate="false" htmlHistoryManagement="true" htmlPlayerVersion="9.0.28" htmlPlayerVersionCheck="true" outputFolderPath="Staff_Ratings-debug" sourceFolderPath="src" strict="true" useApolloConfig="false" verifyDigests="true" warn="true">
<compilerSourcePath>
<compilerSourcePathEntry kind="1" linkType="1" path="H:/flash"/>
</compilerSourcePath>
<libraryPath defaultLinkType="1">
<libraryPathEntry kind="4" path=""/>
</libraryPath>
<sourceAttachmentPath/>
</compiler>
<applications>
<application path="main.mxml"/>
</applications>
<modules/>
<buildCSSFiles/>
</actionScriptProperties>
I don't see how FB3 knows about the
Pr System Intranet
project that seems to be the cause of the errors. -
Where does portal details gets stored in the backend
Hi Gurus,
Where does portal contents gets stored in the portal related backend ?
Example: We have Content Administration under which we create iviews, pages, worksets and roles. Where does this gets stored ? do they get stored in some table as shown below ?
Table:
Parameters:
iview 'Report a Problem' iView Path Add Padding Inside Tray Allow Client-Side Caching Application Name
Values:
Test com.sap.portal.epsolman.EPSolman Yes Yes Testapp
How can we fetch the details ?
Regards,
RashmiHi Rashmi
To get the data from the portal database you need to use a datasource lookup.
Context ctx = new InitialContext();
DataSource ds = (DataSource)ctx.lookup("jdbc/SAP/BC_JMS");
Connection con = ds.getConnection();
The following datasources are provided by default for reading data from portal database
SAP/BC_JMS,SAP/BC_UME, SAP/BC_WDRR.
You can read more about JDBC Connector Service in the link [http://help.sap.com/saphelp_nw04/helpdata/en/31/4cc81b275a419c8c72dca94366318a/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/31/4cc81b275a419c8c72dca94366318a/frameset.htm]
You can also refer to this wiki for more details
[http://wiki.sdn.sap.com/wiki/display/Snippets/DirectAccesstoDatabaseTables|http://wiki.sdn.sap.com/wiki/display/Snippets/DirectAccesstoDatabaseTables]
Hope this helps.
Best Regards,
Ritesh Chopra
P.S: Please grant points if the answer was helpful -
I have a version 1 iPad. I would like to be able to use my LCD projector to display content to my students. I have the dongle to attach to the projector, but can't make it work. The process DOES work with my friend's iPad 2. Any advice? Thanks!
Expanding on what deggie said, with an iPad 1 the app you're using must support video out. Only the iPad 2 can mirror the screen. The apps included with the iPad that output to external monitors are given here:
http://support.apple.com/kb/HT4108
For third-party apps, consult the app's documentation or contact the developer.
Regards. -
HT1848 where does it say authorize computer in the store?
where does it say authorize computer in the itunes store?
Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us. -
I have a mac book pro--I would like very much to have the output to the DVI cable --my audio(sound) wilkl nit default to DVI output --How can this be changed, so it does not default to interabnl speaker
Is there a way to force the system to change to DVI output?????
thanks a lotHi there,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
-Griff W. -
Whats the business object attached to the transaction TBB1 ??
Whats the business object attached to the transaction TBB1 .
I am trying to post a loan contract fees and repayment from Treasury to GL.
Thanks ,
Naval BhattBelow is the exact requirement .... but there is no event generate right now ... I feel that there are some configurations need to be done ..for the event to be generated ...
It will be great if you have any idea about the configurations .. .
Objective:
When loan contract fees and repayment are posted from Treasury to GL, workflow should be activated to:
a. Insert a payment block 'Z' in the document (Will need to create a user-table to define the criteria where payment block is to be inserted), AND
b. Route the document for approval.
If amount < 10,000, only 1 level approval
If amount > 10,000, 2 levels approval required. -
I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work.
Time Machine is one such program, although it is a recursive backup program which offers limited archive capability, based on the capacity of the backup destination, and it requires you set it up before you start editing your files. Some programs are also Versions aware, which offers a kind of restore capability by file. Again needs to be setup before you start editing.
Just a for-your-info:
Mac is not an acronym, it is a nickname for Macintosh. -
HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Hello,
I want to now the max. cable length that the Differential TTL signals can run in both at high and low frequencies.That is very dependant on the type of cable, its construction, and inherent impedance and capacitance. This may be of use:
http://beiied.com/PDFs2/SSI_14-15-bit-encoder_addendum.pdf
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~ -
i
SCREEN IS LOCKED WITH A PICTURE OF THE USB CABLE POINTING TO THE ITUNES SYMBOL
You need to put the device in recovery mode...
iPhone and iPod touch: Unable to update or restore -
I'm in iPhone 5. I transfer photos to a Windows 7 PC, using the USB cable. Lately, the photos are appearing in Windows Explorer within monthly folders, with gibberish titles. The folder names will be 8 random letters and numeric characters. I tend to let photos build up, so there are about 2 years worth of these monthly folders… Between 20 and 25. This is a huge hassle… I'm unable to tell what months are in each folder, by the folder name.… Have to open each folder to see which month is in there. I want to be able to look at all the photos on the iPhone in one view, as I was able to in the past. How do I stop this foldering of photos, by months?? Thank you. BC
I have the same issue. I searched and finally got only one answer is -- Apple suggest customer using iMAC to transfer and backup photos instead of Windows. How great the solution is it!
-
What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you
Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
Appe does not ship outside of the countries where it sells the phones.
Maybe you are looking for
-
We have a new computer and I cannot get my garmin running watch to sync with mozilla. The error message that I keep getting is"The address wasn't understood Firefox doesn't know how to open this address, because one of the following protocols (connec
-
Macbook Pro, How to transfer files to new SSD
Hi Ordered 16GB of Ram and a 480GB SSD for my MacBook Pro 13 2.5GHz last night. I know how to install the ram and SSD but I am kind of stumped as to how to move my files from my HDD currently in my Mac to my new ssd, I know that its possible to do it
-
Unable to Execute Packages using Agent
Hi, When i am trying to run packages using Agent which is situated on other machine it is giving the following error. *" unable to executethe selected logical agent is not assosciated to a physical agent in desired context."* java.util.NoSuchElementE
-
Front Row won't play Theatrical Trailers
When I try to play a theatrical trailer in Front Row on my iMac, I get the following error: +The selected video could not be played. The format was not recognized.+ Only a few days ago it was working - can anyone help fix this?
-
Can I use special links for statistics?
Hey guys, I have a question. I want to upload on my podcast a new episode as a PDF file. I know that's possible. But now I want to link this file via PHP on my server, so I can see live statistics everytime when somebody downloads the file. My new li