Where does the router fallback to load IOS when the IOS in flash memory is corrupted?

If the ios image stored in flash is corrupted from where does the IOS is picked up?

Hi,
The following details the router boot process:
1. The router is powered on.
2. The bootstrap program (ROMmon) in ROM runs Power-On Self Test (POST)
3. The bootstrap checks the Configuration Register value to specify where to load the IOS. By default (the default value of Configuration Register is 2102, in hexadecimal), the router first looks for “boot system” commands in startup-config file. If it finds these commands, it will run boot system commands in order they appear in startup-config to locate the IOS. If not, the IOS image is loaded from Flash . If the IOS is not found in Flash, the bootstrap can try to load the IOS from TFTP server or from ROM (mini-IOS).
Last if it doesnt find the software anywere it would end up in rommon mode.
HTH
Regards
Inayath

Similar Messages

Does cisco router support "tcp reset" mesg when the traffic blocked by access lit ?

hi ,
im trying to know if i blocked a destination with an access list on cisco.
can i make "tcp-rest " to that connection instead on dropping it ??
i belive it supported on ASA appliance , but not sure if supported on cisco routers.
im trying to migrate from linux router to cisco router and apply the same config , one of the challenging task is , i have
"reject-with=tcp-reset"
im wondering if i can do it on cisco router
waiting ur responce
regards

One of the things that keeps me engaged with these forums is that they challenge me and give me opportunities to learn new things. My initial reaction to your question about IPS on IOS router was to say that this is not supported. But I did some research and find that apparently IPS functionality is now supported on some (but not all) of Cisco IOS routers. See this link for additional detail:
http://www.cisco.com/c/en/us/products/collateral/security/ios-intrusion-prevention-system-ips/product_data_sheet0900aecd803137cf.html
HTH
Rick

My ipod only connects to the wifi when i am in the room of the router. as soon as i go out of the room into some other room it disconnects and doesn't connect again. unless i go to the room of the router. i have an ipod 4 with ios 6.1.6

my ipod only connects to the wifi when i am in the room of the router. as soon as i go out of the room into some other room it disconnects and doesn't connect again. unless i go to the room of the router. i have an ipod 4 with ios 6.1.6

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now have this problem?
Did the iPod stay connected before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Could be a loose antenna connectin
http://www.ifixit.com/Guide/iPod+Touch+4th+Generation+Wi-Fi+Antenna+Replacement/ 3640
Apple Retail Store - Genius Bar

Why does my router disconnect every time I sleep the computer? Why did this only start to happen recently?

Why does my router disconnect every time I sleep the computer? Why did this only start to happen recently?

Actually it does with Ethernet too: http://support.apple.com/kb/HT2412?viewlocale=en_US&locale=en_US
What happens when the Mac goes to sleep (not just into idle mode or display sleep)?
On all Macs:
The microprocessor goes into a low-power mode
Video output is turned off, and a connected display may turn off or enter its own idle state
Apple-supplied hard disks spin down; third-party hard disks may spin down
On portable Macs:
The Ethernet port turns off, if applicable (see note below)
Expansion card slots turn off
The built-in modem, if present, turns off (see note below)
An AirPort card, if present, turns off (see note below)
The USB ports only responds to the power key on an external keyboard (see below)
The optical media drive, if present, spins down
Audio input and output turns off
Keyboard illumination, if a feature of your portable computer, turns off
But see the note about selecting, "Wake For Network Access" in Energy Saver preferences.
Note: Portable computers have no network connectivity when in sleep mode, but can wake if the Energy Saver option "Wake for network access" is enabled. If you wish to use file sharing or don't want to interrupt your Internet connection, you should not manually put the computer to sleep, and you should drag the "Computer sleep" slider to Never.

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

Where do my photo files down load to when iPhoto imports them

Where do my photo files down load to when iPhoto imports them

It goes into a Originals or Masters folder inside the iPhoto Library "package" which is really a folder designed not to look like one so people don't open it up and mess with it's insides.
Normally you can manage your photo's in iPhoto and export copies from there, but in emergency or bulk copy cases you might have to access the iPhoto Library directly and copy from there instead.
To open this iPhoto Library "package", right or control click on it and "Show package contents"
Be sure to only duplicate and move original files out and don't mess around there as it will them mess up your iPhoto Library.

I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.

I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.
OS X 10.10.1.
Safari Version 8.0 (10600.1.25.1)
WiFi router connects with mail but not Safari

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

Save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

When I open is adobe acrobat I get this message.
"This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command."

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? Also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard 10.6.8?

No and Yes
Don't use TM for this purpose, clone your drive to an external, plug the external into another MBP and reboot from it. Please note that booting a machine that came with Lion may not be possible from a drive with Snow Leopard.

I have totally "uninstalled" what I had and then reinstalled the newest version of itunes. Still...... First, when I click on the itunes icon to load it takes the program anywhere from two to three minutes to load. None of my other programs take this

I have totally "uninstalled" what I had and then reinstalled the newest
version of itunes. Still......
First, when I click on the itunes icon to load it takes the program anywhere
from two to three minutes to load. None of my other programs take this
long.
When in the itunes program I can be moving around in my library and itunes
when choosing a song or songs, choosing file, edit, etc,. whatever command I
choose it just suddenly stops. I can issue five commands and watch each one
respond in 30 second to two minute intervals. I can issue several commands,
even shutting down, and it will do all but takes several minutes to do so.
My itunes program was working fine when this problem suddenly arose.
Terry

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99436)

My photos won't "load" - it has worked fine for at least two years, but suddenly now when I plug in the chip, iPhoto opens up as usual, but the window just says "loading photos", and the little wheel keeps on spinning - can anyone help me?? I am new here

my photos won't "load" - it has worked fine for at least two years, but suddenly now when I plug in the chip, iPhoto opens up as usual, but the window just says "loading photos", and the little wheel keeps on spinning - can anyone help me?? I am new here. I need to get it working again because we're about to go on a trip!

What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

TS1702 Previously purchased book on iBooks, previously read. Still visible on iBooks on the iPad. When I attempt to open the book now, I get the message: "Failed to load book because the requested resource is missing." Help. Larry

On iBooks app on iPad: When trying to open a previously purchased and read book, I get the message "Failed to load book because the requested resource is missing." How can I open the book again? Larry107

Quit the iBooks app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logou appears and let go of the button.
Or try deleting the book and download it again. You can download it again for free as long as you use the same Apple ID.
If that doesn't work either, sometimes deleting the iBooks app and reinstalling it may work. But art with the first two suggestions.

Does anyone have an idea as to when the 5S (Factory Unlocked) phone will be available?

Does anyone have an idea as to when the 5S (Factory Unlocked) phone will be available?
Thanks

We're users, just like you. How could we possibly know?

Where does the router fallback to load IOS when the IOS in flash memory is corrupted?

Similar Messages

Maybe you are looking for