Where find firmware for WRT160N: v2.0.02_008?

Where can I find revision 8 of the WRT160N version 2 firmware?

That isn't malware but if you want you can PM & I'll email you the same file that I received from LinkSys in January. Ths has been circulated around here for serveral months so its not malware.
WRT160N v2 users --- 1) Get BUILD 08 if you don't have it already 2) A fix IS in the works.
Where can I get this fine firmware?
1) http://audipages.com/router/
2) PM me so I can email you a zip of the firmware if necessary. Be sure to use OpenDNS if reverting to build 8.

Similar Messages

I can't find firmware for my macbook6,1 2009late!

hey guys, i have some problem here.
when i turn a boot camp assistant it says that i should update my firmware to continue.
so, i went to the apple site to get firmware but i can't find firmware for my macbook!
i tried to update my software latest. what should i do for it?
anybody give me some advice!! plz

While I've found reference to a Firmware update for the MacBook versions immediately
earlier than your model and immediately later than your model (you cite MacBook6.1)
there was no listing where I commonly find that information on yours.
How and where was your MacBook identified as 6.1? In the system profile inside?
Very odd that it would ask for a Firmware update for BootCamp, unless there is an
issue with either BootCamp or the computer.
If you cannot discover what is going on, that would be an item to consult a Genius
at an Apple Store, should there be one within reasonable distance of your location.
At many Apple Stores that have an expert or Genius on staff, you can ask. Several
allow you to set an appointment ahead of a visit so you have scheduled time there.
A visit to see the Genius should be of no charge, and they can diagnose issues
even though your device may not have any AppleCare or warranty plan.
You could contact Support to set reservation:
http://www.apple.com/retail/geniusbar/
•Find an Apple Authorized Service Provider
Sorry that isn't an answer to your question.
Good luck & happy computing!

11I: WHERE FIND DOCUMENT FOR AR_TRANSACTION_PUB?

제품 : FIN_Ar
작성날짜 : 2006-05-29
11I: WHERE FIND DOCUMENT FOR AR_TRANSACTION_PUB?
==================================================
PURPOSE
11i 에서 AR_TRANSACTION_PUB 을 이용하여 Single Transaction을 생성하려고 하나 Error 가 발생한다.
Explanation
AR_TRANSACTION_PUB 은 11.0.3 Version에서 사용되던 것으로 11i에서는 Supported API 가 아님을 유의 해야 한다.
11i에서는 AR_TRANSACTION_PUB 대신 AR_INVOICE_API_PUB (ARXPINVB.pls , ARXPINVS.pls) 이 제공 되고 있다.
해당 API 는 2개의 publick procedures 를 포함 하고 있으며 하나는 batch mode 로 multiple invoices를 생성하도록 하고 다른 하나는 single invoice 를 생성하도록 한다.
- CREATE_INVOICE procedure 는 multiple invoices 를 생성하기 위한 precedure 로 batch_id 를 out parameter 로 return한다.
- CREATE_SINGLE_INVOICE procedure 는 single invoice 를 생성하기위한 precudure 로 customer_trx_id 를 out parameter로 return한다.
Example
N/A
Reference Documents
Note. 289888.1 - 11i.AR.L: Where To Find AR_INVOICE_API_PUB Or Where Find Document For AR_TRANSACTION_PUB?
Note. 236938.1 - Oracle Receivables API User Notes - PDF format

Hi;
What is your EBS?
Please kindly looked into the AUTOINVOICE set up, and tell us what are the effects when sales crediting by territory were enabled or disabled? Does this affectthe General Ledger?
Did you check it? Look below notes which may helps you:
11i Autoinvoice Setup White Paper [ID 201240.1]
Can I Use Customer Interface To Populate Territory_id Or Territory Information On Customer Form ? [ID 267303.1]
Regard
Helios

Can't find firmware for BEFW11S4 v2

I'm having trouble finding a firware update for v2 of my BEFW11S4 router. The support page for this model offers a firmware update for v4 only. My current firmware v. is 1.45, which may be the latest version, but I can't seem to find this out anywhere on the Linksys website.
The reason for the update is that my neew iPod 2G won't connect to the internet and I'm guessing an update might help.
Thanks in advance for any assistance.

You can Download 740 KB firmware for BEFW11S4 V2 and save it on the dekstop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Help' tab- Then click on the 'Firmware Upgrade' .... Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Can't Find Firmware for WRT54G V5.1

Purchased the WRT54G week ago, looked for latest firmware (just wanted to have the latest one). Looked on linksys, couldn't find the firmware for version 5.1 (i saw the version of the router on the sticker on the bottom underneath the Linksys logo, it says model no: WRT54G V 5.1). Do i have to use another firmware type instead of searching for the 5.1 ?

the version 5 firmware will work with the version 5.1

Problem finding firmware for Creative MuVo2

Yes as the topic has said , im having problems finding the firmware for this mp3 player which i just bought a few months ago overseas. I was wondering if anyone has them can post em here or give me a link to it so i can download. I kinda accidentally delete it while fixing a problem but instead i created a bigger problem. For 2 days straight i've been surfing around the net just to find it but still no site that has the firmware for it Pls anyone out there , really need your help.. thanx.Message Edited by Ryzcvk on 03-3-2005 07:39 AM

How about this?

Howto find firmware for WLC 4402

We just bought out first piece of Cisco equipment, an AIR-WLC4402-25-K9 (a WLAN controller). Now I?m looking to find if I have the latest firmware (or whatever it?s called on Cisco) on it.
I have registered for an account on cisco.com (as you see) and when I go in to techsupport and check the download section for software for WLC 4402 I can?t find anything. Is this because there is nothing to download or is it because I need to register my products serial number on my account some where ?

Hello Daniel
What is the software u have running now.. I can see the latest software for WLC 4400 as 4.0.206.0 on the download page...
With a normal cisco.com account, u will not have access to download softwares/TAC etc.. you need to have special permissions for that.. to download IOS, u can either contact your cisco partner, who supplied you the box or ask them to make a PICA ID for you.. PICA is a special partner Initiated access ID, which can enable features like IOS downloads for specific product which u have procured. You can talk to your Integrator to get this acccess..
Hope this helps.. all the best.. rate replies if found useful..
Raj

How do I install new firmware for WRT160N?

Okay, I'm having the same DNS problems that everyone else seems to be having with this router. Wireless devices work fine, but my desk PC consistently fails to connect. If one of the wireless devices is actively sending/receiving packets, my desk machine works fine. I have a WRT160N v2 and the firmware version is 2.0.02, build 11 (the notorious one). My PC is a Vista 64 bit OS.
I saw they have a new version of the firmware (2.0.03), which I have downloaded (to hdd). Can anyone explain (in step by step, simple terms) how this ignoramus can install the new firmware (assuming of course, that this new version will solve my connection problems). TIA for any information/instructions you all can provide...

Upgrading the firmware resolves many problem, so you can try it...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful"
Now reset your router.....Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

WHERE is Firmware for Zen M Vista 32bit/64bi

WHERE?

This forum is intended for user interaction, the replies you'll get are from other users. Announcing the forum "sucks" isn't going to help you get any answers. Please be more civil in future.
Which firmware do you have on your player (and from which region, eg US, Europe)?
Cat

Where is firmware for SPA 1001?

I have a SPA 1001 (that I have been using since 2005) but it still has firmware version 2.0.10(e)!
Where can I locate newer firmware AND the software that uploads the firmware to the device? I am able to find a .bin file on a site in the CZ, but no loader. My SPA refuses to upload the software itself via the provisioning option.
Thanks in advance.
Solved!
Go to Solution.

I was successfull. The SPA-1001 firmware fles (all I found) are uploaded on RapidShare as one archive (26MB) :
http://rapidshare.com/files/305539534/SPA-1001_FW.zip
Most of the FW's are both .bin as well as .exe installers.
Versions inside the archive :
Relase FW's : 2.0.13seg, 3.1.8SE, 3.1.17SE, 3.1.19SE
Beta FW's: 3.1.9SE, 3.1.10SE, 3.1.12SE, 3.1.16SE
My favorites : 3.1.8SE, 3.1.19SE (this one I currently use on two my SPA-1001 devices)

MSS - where find code for java iviews and how to copy and extract??????

Hi All,
Not sure if this is the correct forum, so if i'm in the wrong place apologies and if possible could you point me in the right direction. If I am in the right place, here it goes......
we're using R/3 4.7, MSS 6.1.20. We're just beginning to implement MSS. I'm wondering if anyone could give me a couple of examples of which MSS options are based on java iviews, where is the code for these java ivews stored on the system and do i have to do anything special to extract this code.
the reason i want the code is that i want to copy it and see how difficult it is to make changes to the code in netweaver developer studio.
Also, as i'm new to all this, if anyone knows of a good source of info for java iview creation/manipulation, please let me know.
Kind regards,
Liz.

Hi,
This is how we access java code for ESS applications. I hope it is the same for MSS as well.
Open your NWDS -> Window -> Preferences -> Java Development Infrastructure -> Development Configurations.
Provide the Landscape directory server in URL field. something like http://<server name>:<port number>. Ping and confirm the connections. Save the settings.
Now select Window -> Open Perspective -> Development Configurations.
Right click on the Offline and select Import configurations. Select remote option and import the respective items from the server. Create a project for the required inactive DC and you will be able to edit the code in webdynpro perspective.
Hope this helps.
Thanks,
Preetham

Firmware for Ipod 20 GB....help please

Where can I find firmware for my Ipod 20GB? When I go on to apple.com all I find is the Ipod Shuffle firmware information. My Ipod is frozen and will not do anything. Please help. Thank!

Yes under singapore downloads page. Firmware version is .00.02 It is kinda of surprising the firmware has not undergo any updates since the version that came bundled with the player in the box. Zen firmware is less buggy than others?
Make me wonder are all firmware of all models written by the same engineer team? If it is not, I guess I know why certain model firmware always have problems and updates whereas some remain unchanged since launch :smileytongue:

Help to find Gingerbread for MT15a not to MT15i

My mt15a phone originally had Gingerbread OS.
I changed it to 4.0.4 ICS 4.1.B.0.431
But it is some what slow as i feel.
I need re-flash to GB.
But i cant find firmware for Gingerbread to MT15a. But MT15i having the OS every where.
Please Help me to find Gingerbread to MT15a not to MT15i.
Thank You...

Thread moved to better sub forum.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Where I can Find any Firmware for MuVo^2 5gb

...subj
I can't Find It anywhere but i need it very much... Thanx
please answer here or write 2 my icq 8729000

I don't see any firmware for the 5Gb there, unless I'm mistaken. It also doesn't seem to be at Nomadworld.com downloads. I think in the past it was said to contact Creative Support direct.

Cannot find the latest firmware for the Toshiba 40TL838G

Hi,
I'm trying to download the last firmware for the model 40TL838G but I can't find it.
Where can I find it?
Thank you.

Are you sure that TV is connected to internet properly?
How did you connect it? LAN / WLan stick (TOSHIBA Dual Band WLAN-Adapter WLM-20U2)?
In some cases it could be possible that some routers dont pass the firmware update due to locked ports. In such case you should check your router configuration. As additional option you could try to test the TV in connection with another network

Where find firmware for WRT160N: v2.0.02_008?

Similar Messages

Maybe you are looking for