Where G/L Accounts are picked up by the system while doing P.Req , just

Hi SAP Expets,
I want to Know , From where system picks up G L Accounts while we do P.Req , just by entering Account assignment category and Item category , system takes a Default G L account..
from where it s maintained..
ofcouce coding is maintained , but GL Accounts from where they flow...
Any help...
Thanks in Advance
Assign full POints for correct Entry...
Adarsh

Hi Adarsh,
As such GL accounts are defined and controlled by three factors:
Valuation Area
Material types
Business Transaction
So when you raise a PR for a particular material.Then corresponding GL account for this material will be charged, fi any cost are incurring.Else if you are assigning any account assignements, then the consumption account will be charged.
Further Item category influeneces the tyepe business process viz..,sub con, consignment, servies,,etc...
BR,
Krishna

Similar Messages

  • Got a question on mail. We got two e-mail addresses, both different, but messages are picked up from the same server at Vodafone. Received at my iMac I want them to be splitted to two accounts, depending on each e-mail address. How to do this?

    Got a question on mail. We got two e-mail addresses, both different, but messages are picked up from the same server at Vodafone. Received at my iMac I want them to be splitted to two accounts, depending on each e-mail address. How to do this?

    Hello,
    Could you please clarify you have two email addresses [email protected] and [email protected] each with it's own password and you want these delivered to differnt OS X user accounts or seperate folders within Mail?
    mrtotes

  • My email gets bounced into an eternal loop in the outbox and says that my iCloud and me account are not recognized by the server? I've tried setting up another account and it says that I already have them set up, and it is stil only sending 1 or 2 message

    My messages get lost in an eternal loop in my out box and it says that my iCloud me accounts are not recognized by the server. I can send 1 or 2 out of 10.
    We tried adding a new account and that didn't work. We then deleted the account and started again. Still didn't work. Extremely frustrated!

    There also seems to be something wrong with the time!!! My posting says 5:30ish but it was 8:30ish?

  • RUN_LOGIC:Accounts are not available in the rule table

    Dear BPC gurus,
    I experience the following error while trying to run a Business Rule (Account transformation). Setting are to change the flow dimension of an account and apply to YTD.
    Script logic that is used is:
    *RUN_PROGRAM CALC_ACCOUNT
    CAT = %CAT_SET%
    TID_RA = %AAL_TIME_SET%
    *ENDRUN_PROGRAM
    The following error occurs:
    RUN_LOGIC:Accounts are not available in the rule table
    Failed
    Application: FORECAST Package status: ERROR
    All input is welcom.
    Thanks and regards,
    Vincent

    Hi James,
    Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
    Any other suggestions?
    Regards,
    Vincent

  • Business Rule error: Accounts are not available in the rule table

    Hi everybody,
    I have a problem running the Business Rule for the profit/loss copy to the equity account.
    The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
    Then I created the related script logic (ID=CALCACCOUNT):
    *RUN_PROGRAM CALC_ACCOUNT
    CATEGORY_M = %CATEGORY_M_SET%
    CURRENCYLABEL = %CURRENCYLABEL_SET%
    TID_RA = %TIME_SET%
    CALC=PROFIT
    *ENDRUN_PROGRAM
    Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
    PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
    But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
    I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
    Thanks
    Filippo

    Hi James,
    Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
    Any other suggestions?
    Regards,
    Vincent

  • Where is credit control Area in sales order.The field.??

    Hi all
    where is credit control Area in sales order.The field.??
    Ahmed

    Hi Sadhu,
    You may get the wrong infomation if you only checking the credit control area for customer master.
    During sales order creation the system determines the relevant CCA. This is done in 4 steps in the following sequence:
    1.      Userexit
    2.      Credit control area of the payer (XD03)
    3.      Credit control area of the Sales Area (OVFL)
    4.      Credit control area of the Company Code (OB38)
    As far as the system can determine a CCA it leaves the sequence.
    So there maybe no credit control area in customer master data for the payer. But if there is one maintained for sales area or company code or in userexit, the sales order can get one CCA determined. I recommand using the check_cm report because it tells you the correct info.
    Regards,
    Smile

  • I get an error message saying itunes could not sync mail accounts. because the mail accounts are in use by the iPhone.  It asks that i close the mail accounts settings on the iPhone and sync again.  Is it requesting that i delete my email accounts?

    i get an error message saying itunes could not sync mail accounts. because the mail accounts are in use by the iPhone.  It asks that i close the mail accounts settings on the iPhone and sync again.  Is it requesting that i delete my email accounts?

    just as i've posted the same issue here   hope that someone could give us a hand. I have just swtched from nokia to iPhone for my company cell and i have more than 1000 contacts... it would be murder to create those contacts one by one )))))

  • Keep receiving error when trying to change device on my verizon.  Unfortunately, none of the lines on your account are eligible to receive the Online Authorization Code

    Keep receiving error when trying to change device on my verizon.  Unfortunately, none of the lines on your account are eligible to receive the Online Authorization Code. 
    Unable to change device on account.

    That would be great if they weren't 2 different size SIM cards.
    The code is a security feature and I realize this. It is to prevent someone from hacking your account and changing your devices without your knowledge. However, I am the account owner and I know exactly what is going on with my account at all times. I check data usage AT LEAST 2 times daily and I log into my account at least once daily. I would very quickly discover any issues. This feature is more of a (removed)
    Edited as required by the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

  • Itunes could not sync mail accounts to the ipad beacuse the mail accounts are in use by the ipad

    hi all  just syncing pc and ipad after 7.0.3 upgrade and get the message that itunes could not sync mail accounts to the ipad because mail accounts are in us eby the ipad.  i know i have seen several older threads on this,. but now cant find them.  any ideas how to get over this problem message?  many thanks

    When my icloud account is attached to my device I go to mail, contacts, calendars, and there is absolutely no way to remove my mail account. When I deleted my icloud account it suddenly gave me a way to delete and readd my mail account, and synching became feasible again. Synching wasn't possible for me, when I had an icloud account. I suppose the icloud idea still isn't feasible, at least Ican't figure out how to use it.

  • All backend descriptions are already assigned in the system

    Hi SRM Gurus ,
    While Replicating the Vendor from the backend ' I am getting this Error as +'All backend descriptions are already assigned in the system'+ . I have checked the number Range both in backend and SRM its fine we have replicated lot of Vendors allready without any error .
    My analysis :
    we have the same vendor Created with diffrenet accounting group with diffrent address in SRM allready . But we are now created new vendor with new  accounting group and new address we are trying to Replicate the same in SRM but we  are getting that error , Is there any way i can do the sucess full replication with out any error.
    The correct answer will be rewarded accordingly .
    Thanks & Regards
    Ganesh Sagar

    We had a problem with number ranges

  • BBPGETVD - All backend descriptions are already assigned in the system

    Hi together,
    My target
    I'd like to replicate vendors from R/3 with the same vendor numbers to the organizational structure of SRM.
    I execute the transaction: BBPGETVD.
    Settings:
    System: TERCLNT303 (defined Backendsystem)
    Supplier: 4100000005
    Object Id: 50000667 (PPOMV_BBP)
    x Only Transfer R/3 numbers
    Start Transfer
    error message "All backend descriptions are already assigned in the system"
    If I select: If R/3 Number assignment is not possible: Internal Number Assigmente then the system works and create:
    a) BP-Number in table: BUT000
    b) R/3 Vendor Number in table: VENMAP.
    Why I can't create same vendor numbers in tables: BUT000 and VENMAP ?
    Kind Regards
    Edited by: Hermann-Josef Wessels on Oct 31, 2010 9:00 PM
    Edited by: Hermann-Josef Wessels on Oct 31, 2010 9:15 PM
    Edited by: Hermann-Josef Wessels on Oct 31, 2010 9:54 PM

    Please can some one guide me here . I am having issue in replicating vendors this was working fine a couple of days back however it has just stopped working .
    The error it gives me is the same as
    all backend descriptions are already assigned in the system  I am maintaining the below number range please can some guide me 
    below is the SPRO path .
    Cross-application components -> SAP Business Partner -> Business Partner -> Basic Settings -> Number Ranges and Groupings
    Can some one also let me know where to check in ECC ??
    01    0000001999    0000009999    0
    AB    0000001000    0000001998    0
    MD    9000000000    9999999999    0

  • When i try to set up my hotmail account n my IPhone 5, the system reject the password....the system is wrong

    when i try to set up my hotmail account n my IPhone 5, the system reject the password....the system is wrong

    Make sure that your Apple ID is your email address and you do not have any other or old IDs associated with you. Go to www.appleid.apple.com and confirm this info. Make sure that the email address you are trying to sign up with is your primary one.

  • Itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

    itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

    Go to the Edit -> Preferences-> Playback
    In The bottom section of the page click the drop down menu by Play Audio Using and select Windows Audio Session or something other than "Direct sound" or whatever it displays. Click Okay. This worked for me! I hope it works for you too!
    Thanks,
    John

  • Business Area field should not get translate while doing allocations in co

    Dear All,
    In ecc 6.0 when we will be allocating expenses through assessment and Distribution the system credits sender cost center and debits receiver cost center,the same will be applicable for Business Area also.
    But my client is having plant =business area for which they are making financial statements business area wise.
    The client wants its business area not to get affected by above allocations ,Is there any method of restricting costs to remain in same business area and not getting translated to another business area.
    Example :                    cost center           profit center           business area
    expenses                      1011                   1001                     101
    allocation from cctr to cctr 1012 which is having pctr 1002 and business area 102
    expenses                      1012                   1002                       102
    So my requirement is the system should not update business area 102
    Thanks and regards
    vijay

    Hi Vijay,
    Profit Center is derived basing on Assignments. If you have assigned a Profit Center in the Cost Center Master
    Data, obviously for whatever the postings that take place in that Cost Center, will be posted to Profit Center also
    (Statistical).
    In your case, Cost Center 1011 and 1012 have been assigned to different Profit Centers 1001 and 1002. So,
    conceptually what the system is doing is correct.
    You want to restrict the postings to happen to Business Areas. I suggest you, this is not problem of
    stopping/restricting the transaction postings but You have to restructre your Cost Centers and Profit Centers.
    It's rather a Business Process / Structure change required than technical requirement in the system by restricting
    the postings.
    Pls revert back for further discussion...
    Srikanth Munnaluri

  • When i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

    when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

    I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!

Maybe you are looking for