Where have (most of) the BT Broadband newsgroups g...

The only one that I can get, using Thunderbird, is "suggestions". The BT help pages show the following as the available choices -
BT Broadband
bt.broadband.announce - broadband service status announcements
bt.broadband.suggestions - suggestions for BT's broadband service
bt.broadband.support - broadband support group where BT will respond to posts
bt.internet.users.broadband.technical - broadband technical discussion group
any help gratefully received,
Roger

All OK using Thunderbird here, so not a general newsgroup problem

Similar Messages

HT201364 I have most of the requirements for mavericks, however, can I still upgrade to mavericks with 1GB of ram??

I was wondering If I can upgrade to Mavericks if I have MOST of the requirements available..... The only thing I need to do is upgrade the ram. I currently have 1GB of Ram
Or MUST I upgrade the ram???????

And check the Mavericks requirements again. A MacBook that shipped with only 1 Gig of RAM is probably too old for use with Mavericks. As I believe that all of the qualifying MacBooks shipped with a minimum of 2 Gigs RAM.
The minimum requirement for the MocBook is:
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
Note: It always helps to mention your exact Mac model when posting a question in the forums.

I have a white iPhone 4S 8 gb it say that I have most if the room in my music and and I only have fourth songs and also It says that the second mist spacious item is my photo which I deleted all of and I running low on space any suggestions

I have a white iPhone 4S 8 gb it say that I have most if the room in my music and and I only have fourth songs and also It says that the second mist spacious item is my photo which I deleted all of and I running low on space any suggestions

Read this on how to do that https://discussions.apple.com/docs/DOC-3141

Why does my GoLive have most of the menus inactive?

I have GoLive versiion 8.0, running on a Mac with Mac OS 10.4.1, with 640Mb RAM
But most of the menu options are 'greyed out', so I can't even work out how do publish a site by changing any ftp / site settings.
I have looked through the Help sections and searched the forums, but they all tell me to go to 'publish server' at some point, which I'm not allowed to do!
Maybe its something simple... can anyone assist?

Yes, use a sitefile.
Also check and repair permissions for your GoLive folder inside the ASpplciations folder. You need to have read & write perms for that folder and its content to start with.

Considering upgrading to Mavericks (from OS 10.8); have most of the bugs been worked out?

I'm considering upgrading to Mavericks soon (like, maybe today). The reason I haven't done it before now is because I wanted to wait for most (if not all) of the bugs to be worked out of it. For those who have Mavericks or have just recently upgraded, how is it working out?
Also…this might be a stupid question.. but will I need to backup all my stuff before I upgrade (like…will upgrading cause me to lose anything)? Or will it all be fine?

If you don't have a backup of your hard drive you will lose your data at some time. There are only two types of hard drives: those that have crashed and those that will. All it takes is a power surge or other type of interruption to damage the drive or corrupt the data.
I would not even do a minor update of the system without assuring my backup is current.
The easiest backup strategy to implement is an external HD and Time Machine.
OT

HT201343 i have a mid 2010 mac pro and the fact that it have most of the components as the ones compatible with the airplay mirroring mine does not work ?

i have verify that all the components are almost the same please advice why because i was able to previously airply movies why not now that i have the latest os x mountain lion

iTunes airplay still works as it always has.
AirPlay Mirroring (the ML-added feature) requires the latest Intel hardware (specifically the Intel HD Graphics subprocessor). This hardware includes a feature called QuickSync Video (similar to HDMI-over-wifi).
There is no 'almost' have it. Either you do or you do not. It wasn't an arbitrary decision by Apple to deny older Macs of this hardware feature.

Where do I find the Adobe Application Manager (CC) ?

I have most of the Adobe products available thru CC installed and have been using them for two semesters. I cannot find the Application Manager either as part of an application (link from), or as a separate element of the installed files on my system. System is PC based...pretty much standard stuff.
Thanks.

If you do Help / Updates in a CC program it should start up AAM.

HT201543 how do i get my old itune library onto my new laptop, my old laptop is broken but all media is on my phone. Most of the songs are from CD's which i no longer have. HELP!

How do I get my old iTunes library onto my new laptop? My old laptop is broken but all media is on my phone. Most of the songs are from CD's which I no longer have. HELP!

That is not necessarily true. You are allowed to make a back-up of media you own and, at least in the Netherlands, even a copy of a work you've borrowed from a library. The law expressly permits this and you pay a certain amount for recordable media to allow for home use. See http://www.thuiskopie.nl/nl for this. If you then decide to destroy the media, i.e. do not transfer the media to someone else, I don't see how you infringe copyright by keeping the back-up. But I guess some so-called creatives like the idea of making money in all kinds of hypothetical ways...
It is a nice dream, where you have to work once and then earn a lot of money by selling millions of copies from your work. But buyers can make copies too!! Hahahahahaha!

Any way to find out where most of the memory is being taken up?

I've got a G4 Tower with the latest 10.5 OS. I have an 80 GB drive, with 19 GB remaining.
Single clicking on Mac HD, then "apple i" shows me this.
Is there any way to find out more specifically where most of the memory is being taken up?
Say, what folders are the biggest in size, and where they are? I'd like to delete any unwanted crap if i could...
Thanks.

Photecs wrote:
I've got a G4 Tower with the latest 10.5 OS. I have an 80 GB drive, with 19 GB remaining.
Single clicking on Mac HD, then "apple i" shows me this.
Is there any way to find out more specifically where most of the memory is being taken up?
It's not memory, it's disk space which is a different thing.
you can figure out what's taking all the space using 3rd party tools like [Whatsize|http://whatsize.en.softonic.com/mac], [Omindisksweeper|http://www.omnigroup.com/applications/omnidisksweeper>, [Disk Inventory X|http://www.derlien.com> or [Grandperspective|http://sourceforge.net/projects/grandperspectiv>. there is also a terminal method described on [this page|http://homepage.mac.com/francines/articles/TigerMisc.html].
Say, what folders are the biggest in size, and where they are? I'd like to delete any unwanted crap if i could...
Thanks.

What is happening in the most recent keynote when I click on a slide and it pulses (larger-smaller) Two of my slides have disappeared in the navigator although if I play through them they are there.

What is happening in the most recent keynote when I click on a slide and it pulses (larger-smaller) Two of my slides have disappeared in the navigator although if I play through them they are there and the slides have their orignal number--there are just white spaces where the slide should be and I can only get to the slide by clicking through from the prior slide. How do I get the sldies back into the navigator so I can see them. Oddly, they are show up just find on the light table.

Try removing any transitions or builds on these slides, or delete the slides then recreate them as fresh slides.
There are many playback anomalies in Keynote 6 which Apple have said they will be sorting out next year.

The most awful pvr box I have ever had the misfort...

I got BT Vision a few months ago and have, right from the start, been frustrated by the terrible box. I've been using pvrs for many years, my favourite manufacture is Humax, fwiw.
BT box good points:
The padding where it will pad programmes that start one after the other on the same channel - the box will pad either side of both programs.
BT box bad points: - here goes:
Terrible remote reception - point the remote at anything other than the box and it might work - point it directly at the box, and it wont.
Doesn't work well with aftermarket/replacment remotes - I have a Logitech Harmony One remote that has, up until now, worked with every single item I have programmed it to. Not with this box though.
Sluggish remote response - when fast-fowarding through adverts and pressing play to resume, a lottery ensues as to the replay point. It might be 12 seconds after the point when you press play, or 1 minute before you pressed play.
Bad reception? I constantly get messages about poor/low freeview signal via this box, however, the two other pvrs (both dual tuner) and dtv never have any problems with signal - they all report a signal strength and quality of 10/10.
Menu. Who designed the menu? Imagine a list of 10 things. On every other single item I have ever owned, if I'm at the top menu item and I want the bottom menu item, I simply press the 'up' button to scroll from the top directly to the bottom. It's not rocket science, surely? Not on this box. To get to the bottom you have to press 'down' several times - this is made all the more difficult due to the FACT that this box is terrible with remote reception. This is the worst thing about the menu system, but the rest is equally unintuitive. Getting into menu options is incredibly fustrating.
Constant hanging - I'm finding that this box needs more resets than most others I have owned - kind of interrupts your viewing, no?
Sound - the sound stage constantly distorts, calling for a rewind to reset the sound. The box is connected via S/PDIF to my DSPAX640SETII amp that works fine with all the other connected equipment.
Apart from that, it's great. Not.
Comments?

Terrible remote reception - You may have a problem with your remote. OR, there is other AV eqpt interfering with the signal (like a light auto sensor on your TV).
Not one of my other 9 items has this problem
Doesn't work well with aftermarket/replacment remotes - No, it doesn't.
No comment
Sluggish remote response - when fast-fowarding through adverts and pressing play to resume, a lottery ensues - you're pressing the FF button too many times. It has 2xFF, 3xFF, 4xFF and then an uncontrollable super 4xFF.
No I am not. I'm fully versed on how multi speed works thankyou very much. Even 4xFF (in your parlance) causes the lottery effect.
Menu. To get to the bottom you have to press 'down' several times - No you don't. Simply press the volume button down to get to the next bottom screen. Or up to go back.
On every single other item I have ever owned, to scroll to the bottom of a selected menu is acchieved by pressing the 'up' key. Every single one.
Let me demonstrate:
You press the menu button and the below appears, with 'play' highlighted:
Play
Settings
Picture
Audio
Info
On every single product I have ever owned or used, to get to 'Info' from 'Play' is done by simply pressing the up key once. On the BT Vision box, you'd have to press 'down' 4 (or in reality, 7or 8) times to get to 'Info' from 'Play'.
Constant hanging - You may have a problem or fault with your box/internet connection.
I have no problem with my internet connection.
Sound - I cannot comment on this. The Vision box only uses Dolby 5.1 surround Sound for On Demand films only. So I do not have my box connected to any external AV eqpt.
Well - it does.
Hope you get all the above resolved.
Me too
Rank - Mostly Harmless.

I am editing an idvd slideshow to have some of the music selections from itunes fade out at the end of each vacation segment using music reflecting the country visited. Is there a way to fast-forward the slideshow to observe the where the music ends.

I am editing an idvd slideshjow to have some of the music selections fade out at the end of each vacation segment. Is there a way I can fast-forward through the slideshow so I can see where the music is ending and adjust the time to end properly? (without repeatedly clicking the forward button on the e-remote)

Thanks very much, varjak paw. I checked half a dozen tracks on my iMac from different albums which did not copy over, plus several which did copy over. They all show the same location:
Users/Christina/Music/iTunes/iTunes Media/Music/Brandenburg Concertos etc. (one example)
What does this mean relative to the music which didn't copy? Is there another step? or somewhere else I should look?
And wow, thanks for the info about not having legal right to keep the tracks from the CDs. I am embarrassed that I didn't know. I gave most of my CDs to my sister. Before I delete all this highly prized music (400-500 tracks) -- if I get the CDs back from her and keep them at my house, can I continue to keep those tracks on my iMac? (Sister does not have iTunes or even know what an mp3 is, so it's not like she has copied or imported the CDs -- I just didn't realize I needed to retain possession.)
Or do I still need to remove all that music from my library?
Thank you again for your help.
C.

Hi Everyone. I have an old Mac Book. I have saved a ton of emails in my inbox 'On My Mac'. There are so many it is slowing down my computer. Where do I find the folder with all the emails so I can cut and paste them to an external hard drive?Pls.help.

Hi Everyone. I have an old Mac Book with software updated to 10.6.8. I have saved a ton of emails in my inbox 'On My Mac'. There are so many it is slowing down my computer. Where do I find the folder with all the emails so I can cut and paste them to an external hard drive? Pls.help. Tks.

Depending on which email client software you use
the files should be in 'your home folder' library, esp.
if you use Mail application.... ~/Library/Mail
Since you don't specify what mail application,
that would most be associated with the file.
I notice there are some items to the right of your post
where it says "more like this' so that may be worth a
look to see if similar issues were answered. Also, the
Help viewer in your system is a searchable database.
Seems that google also brings up fair information, too.
Do you have a complete bootable clone of your entire
Mac system on an externally enclosed hard disk drive?
Good luck & happy computing!

I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?

I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

I have Process chains as well as some jobs which run.Most of the data is l

Hi Experts,
I have Process chains as well as some jobs which run.Most of the data is loaded through custom ABAP extracts.Now where to check for these jobs and how to understand them.I know that we can check for jobs in sm37.But how do u load data using these jobs.Please tell me in detail how and where u execute these jobs.Please give me an answer

For creating a job use..transaction sm36.Define start condition ,periodicity. etc..
To monitor it you can use--sm37 job monitoring
Various options in sm37 which you can use after check(tick) on any particulur job..and then click on joblog.
To view variants of any job click step>goto(top menu bar)>variant.
,rsmo ( process monitor) -- to view data load--you can view there data load daywise..here to view any particulur data load..click on infopackage /dtp/datasource in rsa1 and click on the monitor icon at the top..system will show you the concerned dataloads in process monitor
For monitoring process chains--go in RSPC and double click on the chain and click on log button(yellow color) select data range..and you can view the status of a chain....red if failed and green if success..and yellow if still running.
Also in sm37 you can find the status of a process chain by searching with job name---bi_process_trigger.
To execute chaingo to RSPC>double click on the chain-->schedule(F8)
If you know the data target of loading ,go in rsa1 and right click on the data target and select manage and you can view the request being loaded.

Where have (most of) the BT Broadband newsgroups g...

Similar Messages

Maybe you are looking for