Where have the disk usage pie charts gone in the activity monitor utility

Wherer have the disk usage pie charts gone?

>About This Mac>More Info
Click the Storage tab
They're bar graphs now.

Similar Messages

  • Activity monitor memory usage pie chart gone?

    What happened to the pie chart that sits in the dock that shows memory usage?  I found this very useful in the past, and Mavericks seems to have removed it from the dock options.

    Uhhh, I know it's a bit late for this but...
    darlingdearie wrote:
    I don't have a dock icon called "memory pressure graph".
    I have
    CPU Usage
    CPU History
    Network Usage
    Disk Activity
    so it's hard to know what you're taking about when referring the the "memory pressure graph".
    Please clarify. Thanks!
    ... it sounds like you have a previous version of the Activity Monitor.  The one that comes with 10.9 has
    CPU
    Memory
    Energy
    Disk
    Network
    The memory pressure is at the bottom of the Memory tab.

  • First question - I have Acrobat 9 on my desktop and the license seems to have been messed up.  I tried to download and fis but I asked me for a disk.  I don't have any idea where the "disk" is.  Can I get the license update without that disk?

    First question - I have Acrobat 9 on my desktop and the license seems to have been messed up.  I tried to download and fis but I asked me for a disk.  I don't have any idea where the "disk" is.  Can I get the license update without that disk?
    Second question - In anticipation of not being able to do that, I bought (at University bookstore) Acrobat XI Pro - do I need to uninstall the 9.0 Pro version before I try to install the XI version?

    If you still have your serial number for Acrobat Pro there is a link to the installer here:  Download Acrobat products | 9, 8

  • I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

    I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

    verify on another Mac if the same
    WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
    possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
    SATA card issue
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
    verify on another Mac if all possible

  • I was loading some CDs into my iTunes library when the disk drive refused to "suck in" the next CD.  Does anyone have a suggest on how I might proceed?

    I was loading some CDs into my iTunes library when the disk drive refused to "suck in" the next CD.  Does anyone have a suggest on how I might proceed?

    Yes, that is a Catch 22.  If you have another Mac you can connect your Mac to it in the Target Disk Mode,  Transferring files between two computers using FireWire, and use Disk Utility on the second Mac to try to run the Hardware Test from there.  Not sure if it's possible to a connected Mac though.
    You can try this several times in the Terminal app and then see if a disk can be fully inserted:
    Enter the following command followed by the Enter or Return key:
    drutil eject
    Do it several times and then try another disk.  (A long shot).

  • Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

    just bough OSX Mountain Lion, my laptop operating with v10.6.8.  Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

    Verify your computer can run Mountain Lion:
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Now try installing Mountain Lion.

  • Can't view the promotional path, neither the task list pie chart

    Dear all,
    I was able to see the task list pie chart correctly as well as for the promotional path . now all what I can see is white space only instead of the promotional path , also for the task list .
    any idea why ?
    I am using Java version 6 
    Thank you in advance.
    Regards, 

    It seems that it was a flash player problem so I re installed it again.

  • I have an iTunes account, i just bought a 4s phone. i previously had a 3g how do i start? do i choose 'create new ph' on itunes or restore to 'elaine i phone' . i picked the latter and siri is gone off the phone

    I have an iTunes account, i just bought a 4s phone. i previously had a 3g how do i start? do i choose 'create new ph' on itunes or restore to 'elaine i phone' . i picked the latter and siri is gone off the phone

    Update to what? The 3G you want to update? You have ios3 or 4 on that 3G?
    Go to a friend, authorize that pc.
    Read this : http://support.apple.com/kb/ht1848
    and this : http://support.apple.com/kb/ht2519
    Make a backup of your stuff (from the phone. apps/photos/music/blabla). Update your phone. The phone will restore the backup automatically.

  • Is there a way to display the legend for a chart, but not the chart?

    Hi,
    I have a stacked column chart and a line chart on top of each other.   I can't use the legend for the stacked column chart because the data will change from month to month, and the 2 charts will not be aligned.  I copied the stacked column chart to another part of the canvas and want to display only the legend, but the chart is still displaying.  Is there a way to prevent the chart from displaying?    Thanks.

    hi Jim Wojewnik,
    we can show only the legend in a pie chart by dragging the edges to closer.do the following,
    select the pie chart,select the edge of the chart and make it small and u ll find the pie chart shrinking.make it lean such that the pie chart disappear.
    try this work around and let me know.
    regards,
    ravi.

  • HELP "Attempting to copy to the disk JODI'S IPOD failed. The disk could..."

    I am receiving this message when attempting to synch. "Attempting to copy to the disk JODI'S IPOD failed. The disk could not be read from or written to." It appears that it synchs some of the songs but hangs up on certain songs. Once I determine the "corrupt" song, I deselect it in Itunes and try synching again. It will synch some more until it comes across another song it doesn't care for. I found 4 songs out of 130 that were problematic. This makes for a very painstaking process. Any help would be appreciated.

    You're not the only one. I use a Mac, and I have come across this same problem. I wonder how it determines which ones it wants to sync and which ones it doesn't.

  • New Mac PRO - Windows 8 Pro Ensure that the disk's controller is enabled in the computer's bios menu

    Hello all,
    I got a new Mac Pro 2013, and am trying to install windows 8 using the Boot Camp Utility.  It creates a 200GB partition, partitioned in FAT.  Having done this on my other computers, I usually hit advanced options and then reformat the partition as NTFS.  I then install.  When i format, I still get this error:
    Windows 8 cannot be installed - ensure that the disk's controller is enabled in the computer's bios menu.  I'm not sure how to get past this step.  I am trying to boot from the windows 8 CD and run setup after I partition the drive.  I have the USB key with the apple setup files on it.
    What am I missing?

    Apparently installing via an ISO fixed this issue for me.

  • Unable to save PDF's from Internet Explorer. Error "The document could not be saved. The disk you were saving to or the disk used for temporary files is full. Free some space on this disk and try again, or save to a different disk."

    We are currently in a published desktop environment in Citrix XenApp 6.5.  Server is running on Windows 2008 R2.  Users are not able to save PDF's into the redirected folders (ie Desktop or My Documents).  Exactly same issue described in "The disk you were saving to or the disk used for temporary file is full...."  Anyone has any suggestion??

    Same problem here. Any ideas?
    Saving with Shortcut "CRTL+SHIFT+S" works just fine.
    Using IE 11.0.9600.17728 and Adobe Reader 11.0.10

  • Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

    Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

    Read
    https://discussions.apple.com/message/15659267#15659267

  • I reset my wallpaper with a new photo. the default earth image is gone from the phone. how do i get it back?

    I reset my wallpaper with a new photo. the default earth image is gone from the phone. how do i get it back? Thanks

    I've tried syncing it at least 3 times thanks for the answer though

  • Labels in pie charts overlap when the slice is very thin

    Hi,
    I have Crystal Reports 2008 and I am using it to create some dynamic charts but in some cases (when the slice of the pie is really thin) the labels of the pie slices overlap. It is a customer's requirement to have labels (legends) on each slice and using the option "Auto-Arrange" doesn't work since the font becomes really tiny and the customer doesn't like it. Could anybody please help?
    Thanks a lot!

    Too much data

Maybe you are looking for