Where/how do we set import location?

I don't want LR to import into my C drive/Picture - I want an alternate location - every time.
I've not seen an "Import" settings page anywhere.
Please let me know where I can make these permanent adjustments.
Much thanks `
Love this helpful forum - thanks to all who give of their time
cheers!

Yes, I think it does.
My procdures are a bit different; I pop one card into the computer, and it copies all the files into one directory on the raid system. I pop that out, and start it copying into the standalone backup device, and while it does that, I bring up LR and tell it to import (move) the files over. LR never seems to remember that I had that same directory (it is only emptied, not removed), so I always have to select it again.. silly LR...
Cheers!

Similar Messages

How do you set up location services

how do you set up location services

Look on the side of your WiFi router/modem and there should be a string of numbers and letters, unless you set up a custom password when you bought it. In that case, you would probably have to call your WiFi service provider and talk to them.

Where/ how do I set SNP to create Planned orders with multiple line items?

Hi
Currently our SNP is generating planned orders on a daily basis, it creates a single order with a single line item per location.
Where/ how do set SNP to create planned orders on a daily basis to generate a single order with multiple line items per location, so therefore one planned order with multiple line items for a single location.
Thanx
Keegan

Hi Keegan,
In SNP (APO) it is not possible to create order with multiple line items.
But you can do some settings so that while planning system can do aggregation and disaggregation.
But your requirment should be set on Aggregation/Dis-aggregation logic.
Please follow the follwing links:
http://help.sap.com/saphelp_scm2007/helpdata/en/2c/c557e9e330cc46b8e440fb3999ca51/content.htm
Aggregation:
http://help.sap.com/saphelp_scm2007/helpdata/en/42/f731d078e73ee4e10000000a1553f6/content.htm
Disaggregation:
http://help.sap.com/saphelp_scm2007/helpdata/en/a6/ebefaf32e22e468355da304cc59387/content.htm
Please be sure that the setting of this logic will be at planning area level.
You can't change aggregation/disaggregation logic further.
Regards,
Santosh

How can i set the location of my pictures in photos app for mac osx?

Not every photo I import into my MacBook have all the metadata in them. iPhoto allowed for setting the location, but in Photos I cannot manage to do so. Is there another way to do it or perhaps it's coming with an update?
Thanks
MacBook Mid-2010
OSX Yosemite 10.10.3
Photos 1.0

Adding location data is not yet supported in Photos.
And we do not know, if future updates will support this feature. It might help, if you send back feedback to Apple with a feature request. You can use this form: Apple - Photos - Feedback
As a work-around, use third party apps to add location data before you import the photos to Photos.
You could, for example, first import to iPhoto, add the locations, batch change the titles and captions, do all the things that are not yet supported in the new Photos, then export the photos from iPhoto and import them to Photos.
Or use the free exiftool, if you like the Terminal.
See: http://www.sno.phy.queensu.ca/~phil/exiftool/exiftool_pod.html#geotagging_exampl es
To install exiftool: http://www.sno.phy.queensu.ca/%7Ephil/exiftool/install.html
Other convenient apps are Jetphoto Studio, Geotagalog, there are many more ..
I use Jetphoto Studio, but it is not free.

How can I set the location of the files for My Digital Editions?

When I installed REader for PC it set up as its file location a location which makes no sense to me and I want to move it nto My Documents. How do I do this without REader for PC "losing" its files?

Adding location data is not yet supported in Photos.
And we do not know, if future updates will support this feature. It might help, if you send back feedback to Apple with a feature request. You can use this form: Apple - Photos - Feedback
As a work-around, use third party apps to add location data before you import the photos to Photos.
You could, for example, first import to iPhoto, add the locations, batch change the titles and captions, do all the things that are not yet supported in the new Photos, then export the photos from iPhoto and import them to Photos.
Or use the free exiftool, if you like the Terminal.
See: http://www.sno.phy.queensu.ca/~phil/exiftool/exiftool_pod.html#geotagging_exampl es
To install exiftool: http://www.sno.phy.queensu.ca/%7Ephil/exiftool/install.html
Other convenient apps are Jetphoto Studio, Geotagalog, there are many more ..
I use Jetphoto Studio, but it is not free.

How do I set a location in Calendar

I just upgraded to Mavericks, one of the interesting new features was location in Calendar. I cannot get that to work.
Location services are enabled for Calendar.
If I type a full address into "Add location" field, it does not get saved. It is gone when I reopen the event.
While I type an address or name that is in my Contacts, I get suggestions. I cannot select any suggestion. They are not added to the location field.
Any suggests about how to get this to work?
Matt Johnson

I can do that except the Calendar App would prefer I link the location to a map or a recent address instead of the address book. It keeps trying to enter a "pin" that is my current location. What the app should allow me to do is link to Apple Maps where I can then auto fill the location with the address I entered on the Map. I think Apple was over complicating this field instead of allowing a free-from of data entry. Also, by trying to enter a comment, the App sometimes aborts back to the main interface screen. There is obviously somekind of bug in this field.

How can I set the location of iChat dialogue box on my desktop?

When I use iChat it always opens a chat box in the upper left corner of my screen. I then drag it down to the lower right, where I want it, but it doesn't remember that position when I close it and open a new box.
Is there a way to get iChat to always open the chat box in the same location where I want it?
Thanks for any help.
Greg

Hi,
Welcome to the  Discussions
This is a yes and no answer.
iChat will remember the place for Outgoing call whether they are Audio, Video or Text chats.
This is always the place the last outgoing chats was when it was Closed and Ended
Incoming Invite to be accepted are always in Standard places and cannot changed.
Text Chats are Top Left of the Screen.
Slightly lower are Audio Only chats.
Video Chat Invites are always Top Centre. (Based on the External iSight being mounted top and centre and Internal iSights being in a similar position - so that it looks like you are looking somewhat towards the camera when watching your Buddy)
Second invites when old invites are present or Chats in the case of Text chats are present will cause a sort of overlapping step effect to the left and downwards (much like any other app opening multiple windows).
If you have Developers Tools Installed you get Property List Editor
This can be used to Edit .plists
I have had little success with trying to alter the positions of windows in iChat.
9:18 PM Tuesday; July 28, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

How do I set download location to sd card? on galaxy s3

4.1.2

Hey garyduff12!
To Waka_Flocka_Flame: I don't mean to take over this post but I feel this way would be easier than changing/making new folders in directories.
garyduff12: Here is my way to change download location to your SD card. Press ALT click Options>and check the box that says '''Always ask me where to save files''' then click OK. You have to point your saved file to your SD card location then when you want to save another file, it should actually point to the SD card again as long as it is plugged in.
Thanks!

How to set the location of a button (in an applet)

Hello
How do i set the location of the button
forexample if i want to create a button in the middle of the applet, how would i do that
Thanks :)

supahsain08 wrote:
Well i did this
Triangle.setLocation(50, 100);
(where Triangle is a buton)
it doesn't do anything, stays at the same placeIt's all about context here and there are still many unknowns here that can effect your result and that you have not told us or shown us. My suggestion to you is to consider posting an SSCCE (Short, Self Contained, Correct (Compilable), Example, a condensed program similar to your current program in that it demonstrates the problem at hand, but is the smallest bit of code that still compiles and has no extra code that's not relevant to your problem. For more info on SSCCEs please look here:
[http://homepage1.nifty.com/algafield/sscce.html|http://homepage1.nifty.com/algafield/sscce.html]
Also, when posting your code, please use code tags so that your code will retain its formatting and be readable. To do this, you can will need to paste already formatted code into the forum, highlight this code, and then press the "code" button at the top of the forum Message editor prior to posting the message. You may want to click on the Preview tab to make sure that your code is formatted correctly. Another way is to place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
// note the differences between the tag at the top vs the bottom.
[/code]or
{code}
// your code block goes here.
// note here that the tags are the same.
{code}good luck, pete

How to set a location of a JFrame using mouseListener?

Hi,
I was wondering how i could set the location of a JFrame using the mouseListener? I know when i want to show a JPopMenu i can do:
pop.setLocation(e.getX(), e.getY());
pop.setInvoker(null);
By using .setInvoker(); I can show the jpopup on the position that i clicked my mouse but this method is not available to the JFrame.
Should i do this with the Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize(); instead? I was wondering if there is an easier way to do this. If not i can code a workaround but thats not my first choice.
Thanks

CaptainMorgan08 wrote:
deAppel wrote:
CaptainMorgan08 wrote:
Why do you need setInvoker() for a JFrame? What's wrong with just setLocation()?The problem is that i want to show my frame where i clicked my mouse but when i get the x,y from the mouselistener getX/Ymethods the frame doesn't show up on the location where i clicked with the mouse, instead it shows the frame in the location x,y NOT relative to the mouse.I see. Well if you're using Java 6, you can use the getXOnScreen() and the getYOnScreen() methods from MouseEvent.
http://java.sun.com/javase/6/docs/api/java/awt/event/MouseEvent.html#getXOnScreen()
Otherwise you'll need to add the x and y coordinates of whatever component you're clicking on.I'm using Java 6, I tried your suggestion but i get the same value with getX/Y and getX/YOnScreen()

How to set the location of a button

Hello
How do i set the location of the button
forexample if i want to create a button in the middle of the applet, how would i do that
Thanks :)

Do not make duplicate posts.
http://forum.java.sun.com/thread.jspa?threadID=5293505&messageID=10240164#10240164

Setting Importance Level for a email message using javax.mail.* API

Setting Importance Level for a email message using javax.mail.* API
From what I understand we can set Flag on Email Message. How can we set Importance Leve: High/Low for an email message?
Thanks
Purvi

Most of the message Flags work only for IMAP mailboxes. POP3 supports only the DELETED flag. It must be understood that Javamail is a framework which provides all the features available in a standard mailing system. But whether or not a particular feature works is a functionality of the particular implementation being used.
Thus for example POP3 cannot differentiate read from unread messages in a mailbox though Javamail provides that feature.

Lightroom keeps changing default import location; how to set it once and for all?

Hi all,
I'm on a mac, and coming from iPhoto. After migrating to Lightroom, I made is so my photos imports from my camera into "/Pictures/LightroomMasters/year/month/day".Now, suddenly, I noticed that they end up in "/Pictures/year/month/day".
I really want Lightroom to keep importing everything inside the "Lightroom Masters"-folder, without me clicking to that location everytime I attach my camera. But going through the Preferences, and Catalouge-settings, I can not find the equivalent of "Default import location". Is there such a setting? Or is Lightroom meant to remember where is imported to last, and keep on using that?
Thanks in advance,
Andreas

It seems to remember the folder structure on my system. But I'm running Windows 7. I just tested it by inserting a memory card and importing the images on it, I don't connect cameras to my computer, to my E drive and to a folder named Pictures 2015. I had LR place these images in a sub-folder of that Picture 2015 with the date in the format of 20150201 and which these picture were taken on the 30th of January so the folder was 20150130. I then closed LR and reopened it and took some more shots around the house and then imported those. LR import dialog went right back to that E drive \Pictures 2015 folder and placed those newer images in a folder named 20150201.
So it remembered which drive and which top level folder it was supposed to. Not sure it it would work with a secondary sub-folder under the Pictures 2015 folder.
To be honest I rarely use the import from memory card feature of LR. I don't care for the naming conventions it offers. I do use the Adobe Photo Downloader applet that comes with PS Bridge as the naming convention in that creates sub-folders with just the month and day in this format 0201. I don't need the year tacked on to the front of that sub-folder name, although it can do that, as I store all my images by years to begin with. Then I import to LR from those folders the APD app creates.
If you are using more than one camera it might remember for each camera so from now on it will go back to the right folder.

How can I set the OS to remember my last import location?

Hi All,
I use Adobe InDesign CS5.5 and QuarkXpress 8 and I am eternally frustrated that the OS will not remember my last import location/folder when importing subsequent pictures from the same folder. InDesign can import several pictures at a time so it is not as frustrating as Quark with this issue. I am sure it is just a setting that I have to apply but I cannot find it. I seem to remember this was an option in previous version of the OS.
I have had a look at the InDesign and Quark preferences and cannot find this option
Can anyone guide me in the right direction?
Kind regards.
Mark1425

Okay, cheers, so I guess it's stored in the application prefs. I just installed Snow L last week and it bothered me that everytime I opened a document I had to set my pref again. I wasn't aware that it was storing it for that particular app though cause I'm using so many differnt apps. But you are right, it does store for the individual app. Cheers for the answer!

ITunes tells me "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want it?

iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want?
Message was edited by: Woildbill

I just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
This is how I did it on Windows 7 with iTunes 10
1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
Example: C:/Users/Woildbill/My Music/iTunes/Music
2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
Hope this helps!

Where/how do we set import location?

Similar Messages

Maybe you are looking for