Where I can store tariff code in material master
Hi,
I am wondering if you also know whether SAP material master is able to store tariff code.
This tariff code is use by the custom department to keep track of their material code.
Any clue?
Thanks.
tuff
Hi,
The Customs Tariff Prefs are maintained in Foriegn Trade View in material master.It needs a pre-config of Foreign Trade/Customs in MM.
Regards,
Patil
Similar Messages
-
Any standard abap table where i can store error message and error code
i want to store two variables it_error_tab_message, it_error_tab_code
to store any error which comes after calling the method of the proxy.
is there any standard table which i can use to store these two values or do i need to create my z table for the same. i need the name of the table where i can store these values for variables it_error_tab_message, it_error_tab_code permanently for future reference
code used is like this
CREATE OBJECT employee_data.
call method employee_data->UPLOAD_ACTION_ITEM
EXPORTING
OUTPUT = output.
commit work.
CATCH cx_ai_system_fault INTO go_sys_exception.
it_error_tab_message = go_sys_exception->errortext
it_error_tab_code = go_sys_exception->errortext.U can easily maintain the Z table rather than a standard ones ... Also retrieving data would be faster
when compared to standard table as it might contain huge no. of entries ... -
Hi, i have a problem with my Adobe Creative Cloud's code, this is alphanumeric, but the registry only works with numeric codes ¿where i can use my code? is a year-long Creative Cloud subscription.
You most likely have a redemption code... especially if you did not buy direct from Adobe
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-or https://forums.adobe.com/thread/1572504 -
Does any link exists where we can find Language code to Country mapping?
Does any link exists where we can find Language code to Country code mapping pls?
DrClap wrote:
>
You might be able to use the Locale.getAvailableLocales() method to get a subset of that list.
Use of getAvailableLocales() display the following: [Below is Language: Country values for AvailableLocales]
ar:
ar: AE
ar: BH
ar: DZ
ar: EG
ar: IQ
ar: JO
ar: KW
ar: LB
ar: LY
ar: MA
ar: OM
ar: QA
ar: SA
ar: SD
ar: SY
ar: TN
ar: YE
hi: IN
iw:
iw: IL
ja:
ja: JP
ko:
ko: KR
th:
th: TH
th: TH
zh:
zh: CN
zh: HK
zh: TW
be:
be: BY
bg:
bg: BG
ca:
ca: ES
cs:
cs: CZ
da:
da: DK
de:
de: AT
de: CH
de: DE
de: LU
el:
el: GR
en: AU
en: CA
en: GB
en: IE
en: IN
en: NZ
en: ZA
es:
es: AR
es: BO
es: CL
es: CO
es: CR
es: DO
es: EC
es: ES
es: GT
es: HN
es: MX
es: NI
es: PA
es: PE
es: PR
es: PY
es: SV
es: UY
es: VE
et:
et: EE
fi:
fi: FI
fr:
fr: BE
fr: CA
fr: CH
fr: FR
fr: LU
hr:
hr: HR
hu:
hu: HU
is:
is: IS
it:
it: CH
it: IT
lt:
lt: LT
lv:
lv: LV
mk:
mk: MK
nl:
nl: BE
nl: NL
no:
no: NO
no: NO
pl:
pl: PL
pt:
pt: BR
pt: PT
ro:
ro: RO
ru:
ru: RU
sh:
sh: YU
sk:
sk: SK
sl:
sl: SI
sq:
sq: AL
sr:
sr: YU
sv:
sv: SE
tr:
tr: TR
uk:
uk: UA
en:
en: US
Where, some of them have country values as blank. It seems strange..!! Any specific reason for blank country names? -
Tax Code in Material Master views
Hi,
I want to know in which view we can find the details of "tax code " for the material in Material master views?.
Also suggest me where else we can find the information of Tax Code for the given material.
ThanksHi,
you cannot get the tax code in material master. In material master we mainatin tax releated information in Foregin trade import and to get that contaol data tab in material master you have to do some config.
After mainatining the data in material master tax code is maintained in FV11 in case of taxinn and in case of taxinj tax releated data is to maintaiin in J1id and different tax code has to be created with the help of FTXP
Plz let me know if any further information is required -
Creation of New T Code for Material Master
HI,
I have to create a new T Code for Material Master Change i.e. for MM02, with writing restrictions to few fields. How to achieve this?
Thanks and Regards,
Hari Prasad.Hi Hariprasad,
If restricting certain fields using field selection option is not suitable for you, you can go ahead with the option Screen Variend
Also refer the link
[https://wiki.sdn.sap.com/wiki/display/Snippets/Transaction%20Variant%20-%20A%20Step%20by%20Step%20Guide%20for%20Creation] -
Control code in Material Master
Hi experts,
Can you please let me know the use of control code in Material Master (in Foreign trade export view)
Thankyou..Hi ,
Control code means it is HSN number for the material . While craeting the material master we can put this is Sales view . It is given by govt department . Base on control code the duty calculate . For examplae 8888.00 the duty is 8% . so if the CIF value is 100 then accessable value will be CIF*1.01 . Base on accesseble value ths duty calculate . How much percentage to calculate is given by goverment department .
Hope this is helpful .
Thanks
Sachin -
Where can I update quantity in material master ?
I was working on STO (Stock Tranport Orders) scenarios
Bascially stock tranport orders can be done in three ways
1. Stock Transport via stock transport procedure using 1 step procedure
2. Stock Tranport via stock tranport posting using 2 step procedure
3. Stock Tranport using a STO ( in Tcode me21n, where we select STO)
Now, when I entered MIGO and selected Transfer posting and movement type 301
(Transfer posting from plant to plant) and maintained the material details
It is throwing up a message "Shortfall of stock level"
I went to material master of the respective material for both the plants and updated the base quantity in the sales view ( base quantity field , under the shipping data ( times of day) block)
Yet, it did not fix my problem and I am not sure where else I can maintain <b>quantity in the material master for the material</b>Any inputs into the above will be helful
Thanks for your timeHi,
If The material has no BOM then it mustbe a ROH material.
What u can do is :\
Goto Transaction MIGO do movement type 101 - goods receipt with purchase order.
If u dont have a purchase order than go with goods receipt with option as "others" and enter the material,Quantity,plant and storage location and post the goods movement.
After that if u check MMBE then the stock will be available.Then go for STO it should be fine.
So material master does not come into picture.
Check the same and come back if u have any doubt.
Prakash -
Is there an app on the mac where I can store all of my documents?
I want to know if there is some sort of homework folder app that I can download onto my mac so I can store all of my microsoft word documents?
Why wouldn't you just create a folder called homework in your Home folder?
-
I have followed the instructions provided on the Adobe.com/go/getserial site several times. I have created an Adobe account and have signed in. I have found the redemption code in the box I bought at Staples or Best Buy (don't remember which or maybe it was at Apple). I am never given a screen on which I can enter that code to get my serial number. What am I doing wrong?
John, let me explain. I recently purchased Adobe Premier Elements from
Staple or Best Buy. When I tried to install it, I was told that I needed
to go to an Adobe web site to get a serial number. There was a piece of
paper in the box that I had purchased that contained a redemption code. As
I went through the process on the Adobe site, I was told that I would be
shown a screen on which I would list that redemption code. Once I had
entered that code, I would be given the serial number required to finish
the installation of the Premier Elements code on my Mac desktop. I went
through the process several times and was never given a screen on which I
could enter the redemption code so I am unable to complete the installation
because I have no serial number.
Please let me hear from you. I spent over $120 for the code and will take
it back to the retailer if I cannot finish the install. This should not be
this hard.
Rusty Edmister
On Sun, Jul 13, 2014 at 6:23 PM, John T Smith <[email protected]> -
Most use ful t code for Material Master changing
Dear All,
Can any one give me most useful T-codes for create, change and display material master.
I have one T-code which is very useful for material master it is "MM50". With help of this tcode you can see material extend detail and also you can delete mass material with help of this tcode.
So please use it and also give me other this type of tcodes.
Regards,
Mahesh WaghHi,
MM17, LSMW, MM50 --- These are the 3 main transactions which is used frequently to Mass change the Material master.
There is one more option is there using BDC Upload.
Batch Data Communication or BDC is a batch interfacing technique that SAP developed. It is mainly used for uploading data into the SAP R/3 system. BDC works by simulating the user input from transactional screen via an ABAP program.
The data input data file will come in the form of a flat file which the user save as file type txt file or prn file from the Microsoft Excel program. An Abaper will create a program to read the text file and upload into the SAP system.
Transaction -- SHDB will be used to record the change material master. After, the simulation, the Abaper can generate a sample program and modify from there. It makes the programming easier and faster.
For a BDC upload you need to write a program which created BDC sessions.
hope you got it. Take a help of ABAPer for this BDC Upload.
rgds
Chidanand -
List of Codes In Material Master
Dear Sir,
How can we know the list of all codes created in material master according to there category like MRM ERM etc...
If any one know good way pls answer soon
Thanks & Regard
Ajay PareekHi Ajay,
If u are looking for Material list based on "Material Group" is maintained at Basic data view,
Check with std.report MM60 or table MARA.
If not so please explain
Regards
pradeep -
Control Code in Material Master Foreign Trade Export view
Hi All,
In material master Foreign Trade Export view we have a field Control Code (MARC - STEUC) i would like to know where do we configure these control codes in SPRO?
I need to know the path to configure them
Regard s
Pavanspro@Logistics - General@Material Master@Material IDs@Maintain PKWiUs
Regards,
Indranil -
Store files in the material master
is it possible to store files (pictures) in the material master.. and then use this picture in a materials report?
Dear,
Please check step by step document with screenshots at below link:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=180357002
http://wiki.sdn.sap.com/wiki/display/SCM/AttachingDesignDiagramtoMaterial+Master
Secondly, DMS - Document Management System will not included in SAP R/3, need to be installed separately.
Regards,
Syed Hussain. -
Can we bring MAP of Material Master for Purchasing price.
Dear All,
Can any body suggest , how to get the MAP of Material Master in Purchase Oder in PBXX or PB00 or any other condition type.
Our Business requirement is very dynamic and requires MAP of Material master price rather PIR to avoid master data maintainance.
Thanks & Regards
Sudhansuhi..
go to m/06 and open ur condition type...
then..in condition category tab choose "t" i.e. Moving average price.
try it out..
hope it works..
thnks..
Maybe you are looking for
-
Iphone 4 won't update to iOS 5 and I think it's my itune's fault
So my iphone has been stuck in this outdated ios for more than a year. Whenever I try to press update to install the iOS 5.1 (or something like that), it says something along the lines of "the iphone software update server could not be contacted." No
-
Why am I not able to donate via text message?
After I sent a code to donate, I get a message asking what my billing zip code is. I reply with that and get a response saying, "Your wireless account is not eligible to donate. Your donation cannot be processed. You can still donate at redcross.org.
-
Can i stop airport from searching for additional networks after connecting to a network
Airport keeps searching for additional networks after connecting to my wireless router. Can I stop this? does this effect system performance?
-
There's something strange about the OS9 driver of my Canon Pixma iP3000 printer. In OS X, I can easily view the remaining ink level information of my printer. In OS9, that option is not available. Curious, I could do that without problems in OS 9 wit
-
Dice cuenta no verificada, sin embargo me aparece verificada aqui en la cuenta, por mas que hasta intente eliminarla no lo logro, ahora no se que hacer...