Where I need to check to make profile field in ECM compulsory?

Hi Guys,
where I need to check to make change type & profile field in ECM compulsory(in CC01/CC31)?
Thanks & Regards
JS

Dear,
Use SHD0 create Transaction variant for ZCC01 and CC31amd make field RC29A-AEPRO as required field.
Or use the  exit PCCD0004 ECH: Check before saving the change number.
Regards,
R.Brahmankar

Similar Messages

  • I bought an iphone 4s from a pawn shop,i need to check and make sure the phone is clear to be activated in my name,i was told you can check the IMEI number,i have the number,but what do i do with it?

    I bought an iphone 4s from a pawn shop,i need to check and make sure the phone is clear to be activated in my name,i was told you can check the IMEI number,i have the number,but what do i do with it?

    Who is the carrier the iPhone is carrier locked with?
    If the carrier has a blacklist for lost/stolen cell phones, it would be the carrier you need to contact.

  • How can we make a field confirm control compulsory field

    how can we make a field 'confirm control' compulsory field while creating a vendor code
    this field is under tab default data material tab while creating vendor code in purchasing org .part of vendor

    Hello,
    This can be done using the configuration..
    Go to Logistics - General >Business Partner>Vendors>Control>Define Account Groups and Field Selection (Vendor)--> and select the vendor group for which you want this field to be mandatory.
    Press details --> in the block "field status", double click Purchasing Plant and again double click Plant level purchasing data, in the second page (down), you can see the confirmation control key, that you have to make as req entry.
    If you want the conf control key to be mandatory for all the vendors groups, then you can do this by purchasing organisation level..that config node is just below this settings.
    Regards,
    Sakthi

  • How to check two internal table fields

    Hi all,
    I need to check two internal table fields are equal or not means which statement i can use.
    Not internal table ,table contents i need to check i.e
    it1-pernr = it2-pernr.
    like this
    if i put loop it'll check one table field for one loop.
    if i put two loop means some fields reflecting 2 in it1 then it'll pring 4 times like that.i want to print whatever in internal table only .
    pernr(0001) two times there in it1 means
    it1-pernr = it2-pernr then
    it's printing
    0001
    0001
    0001
    0001
    like this but actually in it1 only two records.
    Anybody know solution.tell me.
    Thanks
    Regards,
    Nandha

    Hi,
    code for your view
    data : begin of it1 occurs 0,
           z_pernr like pa9012-pernr,
           z_fac_c like pa9012-zz_fac_c,
           end of it1.
    data : it2 like Zsc1 occurs 0 with header line,
    It1 data
    pernr   FAC C
    0001   5555
    0001   5555
    0002   4444
    0003   3333
    0006   8888
    It2 data
    pernr   FAC C
    0001   5555
    0001   5555
    0005   6666
    0003   3333
    output(My code)
    loop at it2 .
    loop at it1 where pernr = it2-pernr.
      write:/01 it1-1pernr,
            10 it1-z_fac_c.
    endloop.
    endloop.
    out put i need.
    0001   5555
    0001   5555
    0002   4444
    0003   3333
    Thanks,
    Nandha

  • I updated SCCM 2012 R2 from CU3 to CU4. Where can I find good directions on what else I need to do to make this work?

    I updated SCCM 2012 R2 from CU3 to CU4. Where can I find good directions on what else I need to do to make this work? I'm assuming I have to deploy the new clients?
    Thanks,
    James
    James A+, Network+, MCP

    You have to create different collections (x64 vs x86 clients) because the .msp to be deployed is architecture specific.
    "Distribute content" just distributes binaries to distribution points. You can select a collection there, but that has nothing to do with clients. It just distributes content to DPs that are assigned to collections.
    Torsten Meringer | http://www.mssccmfaq.de
    Ok. That is helpful. I appreciate the response. I hate to ask another question, but I', still learning the product. In the Step-by-Step SCCM 2012 R2 CU4 Installation Guide from System Center Dudes, it says to create the collections by using their predefined
    queries. I tried to enter these as queries but I think I am doing so in the wrong area of the collection creation process. Could you break it down for me?
    Do you know of any good training (free) that is video based an breaks SCCM 2012 R2 down into smaller more detailed steps?
    Thanks,
    James
    James A+, Network+, MCP

  • Unable to hear recordings on internet all of a sudden. Checked Sound and all is good. Where else do I need to check?

    All of a sudden, I am unable to play from YouTube or other online recordings. I've checked sound on System Preferences and all is as it should be. Please direct me to anything else I need to check. Thank you for your time in answering.

    youtube has it's own volume control have you tried that?
    also tried to update flash plugin to latests?

  • Need help checking 2 see if my plugins are up 2 date- page where I find info says "click update"- I can't find where 2 click

    My Firefox keeps crashing when I have windows open that use Shockwave Flash player, and today my CPU is up in the 30-40% range. I went to the page where I should be able to make sure I have the latest version of the plugin (https://www.mozilla.org/en-US/plugincheck/) and it says "click update..." but I can't figure out where to click. I'm running Windows 7. I'd appreciate any help anyone can give me. Thanks in advance!

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB

  • My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp  to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

    My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp  to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
    The below items appeared when I opened Photoshop CS 5:
    “Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
    (I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

    For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
    If so, check Clipped and see if that makes a difference.
    (Window>Clone Source)
    As to the video card problem:
    Which version of windows are you using?
    What is the make and model of your graphics card?
    Do you know which update windows installed?

  • Why do I need to use a CMYK profile?

    Hi all,
    I am new to these forums, but have some theoretical and a bit of practical knowledge on Color Management. I know what a dot gain, color space, true black vs composite black, etc are, yet I struggle to build the big picture of the whole thing. I am actually doing design work, where we are going to print a brochure. I have done the Illustrator artwork, it has an embedded image and I am trying to make it ready for a good precise print.
    My question is, why do I need a CMYK profile at all??
    As I understand it, my document IS CMYK already, i.e. it uses component C, M, Y and K numbers for artwork primitives, and as far as I can understand the whole point of working with CMYK instead of RGB (which is for additive colorimetry - i.e electron guns and LCDs) is the fact that it is suitable for printers. If Cyan, Magenta, Yellow and BlacK inks get input from the CMYK numbers, then the print should look the same on all ink-utilizing devices, should it not?
    That said, I understand the point of RGB-to-CMYK conversion and vice versa, since obviously i have to preview my art on my monitor before it gets into printing. But since CMYK profiles exist, does it mean printers printing the same CMYK values get different results? (disregarding issues of different paper weights and dot gains)
    Thanks. This has been bugging me, and I am not THAT much into printing yet as to buy the Real World Color Management book i ve been hearing so much about.

    If I may add,
    The ONLY times most of us need to embed an ICC profile in a CMYK file are:
    1) We want to PROOF it faithfully on a hardware-calibrated monitor (Photoshop reads the embedded profile and Converts it to Monitor RGB).
    2) We want to PROOF it faithfully on any other hardware-calibrated printer that uses a different Target color space (Photoshop reads the embedded profile and Converts it to the specific target profile). (Or the workflow ignores my Source Profile and Converts to target proofing space based on the wrong working space).
    3) We need to CONVERT it to another profile (Photoshop reads the embedded profile and Converts it to a new target space/profile).
    PERSONALLY, when I deliver CMYK it is already Converted to the correct CMYK (directly from my 16-bit Adobe RGB file), and I do not want anyone downstream dinking around with My Color.
    The old Quark did this task nicely -- simple place the tif and print the job.
    Today's pdf and color-managed layout programs make understanding and implementing this instruction much more confusing and hazardous (how to send 'the numbers' straight through).
    If I trust the print shop 100%, I will hand them my 8-bit Adobe RGB and let them do the Conversion to their press CMYK.
    Otherwise, send [my] CMYK 'numbers' straight through. Period.
    +++++++
    The problems with people who do not understand HOW ICC profile work is they will strip my profile (knowingly or unknowingly) and Assign-Apply-Assume their own profile -- effectively -- hosing my color.
    This problem is easy to see in Photoshop by Assign profile.
    The classic real-world example is the old-school print shop's clueless "color expert" who ignores our embedded profile, because he says, he has turned "color management off" and "doesn't use profiles." He tells us our file is bad because his print is bad, and he will try to correct our bad color and print another round of proofs.
    Does this sound familiar?
    What the cave man actually did was strip our embedded file of its profile, and/or he Applied-Assumed-Assigned his own working space to our file then he takes a sledgehammer and beats our color up into his closed workflow (and he is probably working on an uncalibrated monitor to boot).

  • How to make "Data Entry Profile" field input unable or display only in CAT2

    hi ,
    I have requiremnet where I need to make "Data Entry Profile" field in the CAT2 transaction as Display only .That is for each user it should come as default one .
    The reason behind this is , user should not change this Profile and maintain an incorrect timesheet entries.
    Is there any User exit where i can do this ? 
    Let me know as this is very urgent requirement.
    Points will be definately rewarded.
    Thanks .

    Hemant,
    Got SHD0 transaction and create screen variant for that transaction there you can disable that field.
    Create Transaction variant for that transaction and assign previously created screen variant to this transaction varient. actiavte.
    Reward if it helps,
    Satish

  • How do I find out if other firefox copies are running? The software update keeps saying it won't install because I need to check if other copies are running.

    The update popped up, I clicked to install and it keeps popping up when I open Firefox that it cannot install because I need to check and see if other firefox copies are running. I do not know how to do that and why wouldn't firefox be able to tell if other copies are running and tell me how to delete them if that is what is necessary

    Do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0: http://www.mozilla.com/en-US/firefox/all.html
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Do not remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

    Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

    Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install.  It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
    http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
    You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer. 
    I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process.  I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software.  I also scanned the downloaded zip with two virus scanners and both said it was clean.  Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
    https://www.youtube.com/watch?v=vlT0N2CX50g

  • Need to Check whether the program is Active or not

    Is there any statement where i can check  whether the report program is Active or not.
    Using below statement i am  copying the entire Code in internal table it_source.Before copying in the source code in the  internal table  it_source.I need to check that program is Active or not if it is not active and i need to give a pop message and forceliy i need to Active it.
    read report wa_trdir-name into it_source.

    Hi Srini,
    i just checked the table REPOSRC for a program which was not activated, i got two entries for the program one as active and one as inactive ,as soon as i activated the program there was a single entry.
    so is it that we should check if we have any inactive entry in the table for the program?.
    Regards,
    gunjan

  • I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchas

    I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchased, and am paying monthly for my creative cloud for photography. Please help

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Multi Plot XY Graph. One Plot Envlope, checking to make sure the other plot falls within the enclope plot

    Hi Guys
    Have a problem with XY graphing, I have 5 xy samples that define an envlope (one plot), samples need to be checked to make sure they are within the selected envlope.
    Any Ideas ?

    Can you split the 4 xy point for your envelope int two envelopes:
    Upper Limit 0,0 3,6 9,9
    Lower Limit 3,0 9,9 (or maybe 0,0 3,0 9,9 if you need to start at x=0)
    Then in your limit check connect both upper and lower envelopes.
    Have a look at the attached vi, it's not very tidy and there may be a problem with the number of samples in the various arrays, it may give you some ideas to try.
    Attachments:
    Check_Envelope.vi ‏72 KB

Maybe you are looking for