Where idoc_output_ordrsp is launched

Hi!!
When the user creates an order we launch an idoc through IDOC_OUTPUT_ORDRSP (we modify some user exits). I need to know where is the include or programm that launch this function when an order is created and saved.
Thx in advance

Hi,
When you Save the Order an entry is NAST table is created, which is an IMPORT parameter for this function module, and it triggers the function module flow and the results are passed to RSNASTED program which creates the IDOC.
reward if useful
regards,
ANJI
Message was edited by:
Anji Reddy Vangala

Similar Messages

HT4839 Where do I launch iphone configuration utility on iphone 4

Where do I launch iphone configuratin utility on iphone 4

As noted in the article you linked to -> "For additional information on configuration profiles and the iPhone Configuration Utility, visit iOS Enterprise Deployment Resources and the iPhone Enterprise Support site."

I downloaded creative cloud but once i opened it, it closed right at the part where it says launching creative cloud desktop

So i downloaded Photoshop before and it was a trial version. I had too restore my PC (for another reason that has nothing to do with creative cloud or Photoshop) to a date when I didn't have creative cloud or Photoshop. So once I tried getting creative cloud again, I got to the part where it says launching creative cloud and it just closed and it never opened creative cloud

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html

Where is Menu Launch : Application in LV 2009?

I want to get to the app instance for Tool's Menu VIs (its name is NI.LV.Dialog). In LV 2013, the property node is App.Menu LaunchApp. However, I cant find it in LV 2009. Does anyone know where it is or what is the workaround?
I tried to revert a LV 2013 VI that contains this property node back to LV 2009. However, it generates an error 42 (generic error).
Solved!
Go to Solution.

You don't see the property in 2009 because it was defined as private. As you can see, you can save back and use it.
It returns an error 42 presumably because you're running the VI yourself instead of launching it from a menu. If you put it in a VI which is launched from a menu it should work properly. You can see one such example in the Code Capture Tool, which is launched from the Tools menu and uses this to get a reference to the VI you opened it from.
Try to take over the world!

LXDM breaks the console from where it's launched

I'm having a very weird issue with LXDM when launched from a tty.
I usually boot my Arch in level 3, and then manually switch to X if I need it. Sometimes I type "init 5", and some other times I type "/etc/rc.d/[whatever]dm start".
So if, as a desktop manager, I launch xdm or gdm, everything works ok. HOWEVER, if I launch lxdm, then I experience this very weird issue: when going back to the text console (usually Ctrl+Alt+F1) from where I launched the session (and only that one!), the console behaves very strangely, half the characters I type don't get echoed to the screen, non-ascii characters are not recognized, etc. If I go back to any other console (F2 to F6), it works ok.
This problem occurs whenever I launch lxdm, regardless of which session I open in the desktop manager (sometimes I open Lxde, sometimes Xfce4).
And this is a pity, because it prevents me from using lxdm, which I'd like to use.
Does anybody have a clue about what might be the reason or the cause for this? Any hint?
Very much appreciated, thank you.
Last edited by humilleitor (2011-09-14 01:19:34)

humilleitor wrote:But even if you go into X from inittab, I guess your system is using some DM, isn't it?
Nope. It's the method described in the wiki somewhere to launch startx from inittab:
x:5:once:/bin/su gusar -l -c "/bin/bash --login -c startx > /dev/null 2>&1"
Edit: And you know what the weird part is? Doesn't seem to happen on my LiveUSB distro. I use busybox for a few things there, but otherwise it's pretty much Arch packaged into a squashfs image. Weird quirks, don't you just love them?
Last edited by Gusar (2011-09-14 12:01:23)

Where can i launch the Server Wizard?

I have OAS 4.0.7 and Developer Server 6.0 (deployment
installation) on my NT 4.0 SP3 machine. In the manuals :
"Oracle Developer includes a configuration wizard that can
automatically configure your Web
environment. After running the Server Wizard, you simply deploy
your applications on your Web
server, then broadcast your applicationFs URL to end users.
To launch the Server Wizard, choose StartOracle Developer
R6.0Server Wizard. "
Where and how can i launch that wizard. There's nothing like
that in my Oracle Developer 6.0 menu.
null

Roger Lachance (guest) wrote:
: I have OAS 4.0.7 and Developer Server 6.0 (deployment
: installation) on my NT 4.0 SP3 machine. In the manuals :
: "Oracle Developer includes a configuration wizard that can
: automatically configure your Web
: environment. After running the Server Wizard, you simply
deploy
: your applications on your Web
: server, then broadcast your applicationFs URL to end users.
: To launch the Server Wizard, choose StartOracle Developer
: R6.0Server Wizard. "
: Where and how can i launch that wizard. There's nothing like
: that in my Oracle Developer 6.0 menu.
You can do the folowing steps :
1) unzip the sun directory from C:\ORANT\JDK\LIB\Classes.zip,
and copy it to C:\ORANT\FORMS60\JAVA
2) unzip the C:\ORANT\WZC\BIN\Wzcwin32.exe to c:\orant\wzc
3) modify the WZCENV.BAT as below
REM jdk class path
set JDKCLASS=c:\orant\jdk\lib\classes.zip
REM jdk bin path
set JDKPATH=c:\orant\jdk\bin
REM ewt class path
set EWTCLASS=c:\orant\forms60\java
REM bali shared class path
set BALICLASS=c:\orant\forms60\java
REM wzc top path
set WZCHOME=c:\orant\wzc
REM netscape path
set NETSCAPEHOME=C:\Program Files\Netscape\Communicator\Program
4) in NT ms-dos mode , frist run wzcenv.bat , then run the
runwzc.bat
null

Where is WF 'Launch Processes Link' in 11.5.10.2?

I login and choose the workflow admin responosbility and I cannot find Launch Processes Link.

Hi,
- Login to Workflow Administrator responsibility > Developer Studio
- Search the Workflow process you want to launch
- Click on the Run icon
Regards,
Hussein

Where is the Collaboration Launch Pad (CLP)

I'm drawing a blank on where the Collaboration Launch Pad (CLP) is.
This link:
http://help.sap.com/saphelp_nw04/helpdata/en/75/ecfb9adbb6b34e9e0180a8e129be2a/content.htm
show what it looks like, but I can't find. Yeah I'm feeling kinda lame.
I click on Collaboration -> Rooms or Collaboration -> MY Sessions and I can't find the CLP.
Is there a permission that I failed to give myself.
Using the CLP I should be able to send instant msgs and etc.
Need some education. I was also looking for some how-to guides if you know of any.

Answered my own question:
Here it is:
1. Logon to portal as Administrator
2. Navigate to Content Administrator -> Portal Content
3. Open the tree 'Portal Content'
4. Open the tree 'Content Provided by SAP'
5. Open the tree 'End User Content'
6. Open the tree 'Standard Portal user'
7. Open the Object 'Default Framework Page'
8. Open the Properties of 'Tool Area'
9. Select the 'Property Category' as 'Select all'
10. Set the property 'Enable Collaboration Launch Pad' to "Yes"
11. Set the property 'Enable Real-Time Collaboration' to "Yes"
12 Restart the portal (If you are not getting Collaboration Launch Pad).

Error when launching Netweaver Developer Studio

Hi.
can someone help me. I installed Netweaver Developer studio but when I try to launch it.
I get this error:
"Problem during startup. Check the .log file in the ".metadata" directory of your workspace"
!SESSION Aug 30, 2005 14:50:39.954 -
java.version=1.4.2_06
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86 -feature com.sap.java.ide -consolelog -debug C:\j2sdk1.4.2_06\bin\java.exe
-Xmx512m
-Xms128m
-XX:PermSize=32m
-XX:MaxPermSize=128m
-DallUserDir='C:\Documents and Settings\All Users\Application Data'
-cp C:\Program Files\SAP\JDT\eclipse\SapStartup.jar com.sap.ide.eclipse.startup.Main
-os win32
-ws win32
-arch x86
-feature com.sap.java.ide
-showsplash C:\Program Files\SAP\JDT\eclipse\SapIde.exe -showsplash 600
-consolelog
-debug -data C:\NetweaverDevStudio\workspace -install file:C:/Program Files/SAP/JDT/eclipse/
!ENTRY Startup 1 0 Aug 30, 2005 14:50:39.954
!MESSAGE Sap NetWeaver Developer Studio - Build: 200507190119
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Aug 30, 2005 14:50:40.188
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:286)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:795)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:602)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: java.lang.NumberFormatException: For input string: ""
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:489)
     at java.lang.Integer.parseInt(Integer.java:518)
     at com.tssap.config.ProxySettings.parse(ProxySettings.java:184)
     at com.tssap.config.ProxySettings.loadFromPreferences(ProxySettings.java:114)
     at com.tssap.config.Startup.runBeforeWBStartup(Startup.java:39)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:65)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more
Please advise.
thanks
Jennifer

Hi Jennifer,
             This problem is a common one.
1)Make sure that you have Administrator rights in the systems where you are launching NW Studio.
2)Go to your workspace check the log file (basically a text file)
3)Clear your unwanted registry in your registry folder.
If this doesn't work, re-install NW Studio by deleting the older version from Add or Remove Program in control Panel.
Give the Java bin path correctly and devote any folder of your choice to be your workspace.
Hope it helps.
Regards,
Guru.
P.S :- There is no link for launching of NW Studio with Internet Explorer as both are different applications.

Itunes app won't launch ... Please Help!

I have been having this problem off and on where iTunes starts launch (IE: does the bounce thing on the dock) but then stops ... the icon is visible and I can force quit the application as if its sunning, but it never launches. I've tried reinstalling ... restarting ... trashing preferences ... repairing permissions ... etc. etc. Each of these methods has worked once or so ... but now none are ... so I have no iTunes! Drag! Incidentally, I am running an iBook g4 with osx 10.3.9. Itunes 6. Thanks in advance for any help!!!
-Matthew

Matthew hello,
Go to the main boot System library and open the Receipts folder...
drag to the trash... iTunes4.pkg and check to see if any other 'iTunesX.pkg' files are there, if so, drag also to the trash but only the ones starting with 'iTunes' leave all others untouched and close the folder.
Check that your HD is in order with 'Disk Utility' ...
Run repair HD from original CD or DVD install disk...
insert disk and re-start holding down the 'c' key until you see the spinning gear.
At installer level do not continue...
Use top left menu and go 'Disk Uitility'
select your HD volume with Operating system on...
select 1st aid... select repair Hard Disk.
if errors are repaired run again until none are reported then verify your HD.
quit and return to the Finder
Check the pemissions are set correct on the Apple installed software...
use 'Disk Utility' from Applications > Utilities > select HD... select 1st aid. repair permissions... if repairs are needed run again until none are repaired... do not worry about messages 'we are using special permissions etc... they are OK Quit when finished.
Download iTunes 6.0.1 .... then install.... If you have any doubts about the integerity of your system you should run Mac OS X Combo Update 10.3.9 (I recommend you do this) ... download and install 'combo' 1st and then do the iTunes install.
Now do the HD repairs and permissions repairs again, as above, in the same order. Important
Your iTunes program should work OK now but there is one other piece which is optional but I recommend it as good thing to do and that is, Check and set correct permissions on all your music files.
Use BatChmod to set correct permissions on your home ~ Music folder
This compact GUI will perform the same tasks as a 'terminal command line'
drag the complete Music folder with libraries and iTunes Music folder inside to the BatChmod Icon and drop....
check path is correct.... tick if not already.... Owner=R W X, Group=R, Others=R,
then tick 'Apply ownership and privileges' tick 'Unlock" ... click Apply...
provide password... all done very quick...
Check you do not have any XBox / Digi setups running that do not have the latest drivers installed.
If IE is giving problems I suggest you re-install as well.
See how it all goes now after 1st dragging from the dock the iTunes Icon and replacing it with a new copy, by dragging the iTunes Icon from your Applications folder to the dock and start from there..
Any questions ask 1st and do later not the other way around... take care... TP
iMac 800MHz PowerPC G4 17 Flat Screen. G4 iBook. Mac OS X (10.4.3)

Leopard seeing app as PowerPC and will not launch

I have a situation where Leopard is seeing an application hosted on a Mac server as a PowerPC app and will not launch it on some Intel Macs in my lab. However, the app is not a PowerPC app and will in fact launch correctly on other Intel Macs in my lab that are also running Leopard. On those Macs that it won't work on, the icon appears differently than on those where it will launch. Grayed out as PowerPC apps are supposed to on Intel Macs in Leopard. However, on those where it will launch the icon appears correctly. It's the same exact app though and the same exact OS on all workstations.
Has anyone seen this issue and if so, is there a way to resolve it?

Anyone? I can not get Intunes to load without crashing. See system setup above. Is there a fix that someone can suggest?

Launching Wizards in Oracle 11G on Linux install

Hi,
Just wondering if someone can tell me where the wizard launches are located in the Linux install.
Thanks,
Zach

Hans,
I have heard them referred to in different ways,
Configuration assistance, Wizards, etc. Say if I
didnt want to create a database by command line. I
wanted to walk through "Configuration Assistant" and
choose defaults for the quick and easy setup. No worries. Using the correct terminology gets the right answer faster, and the wrong terminology simply means that we have to test and verify the question. Always works that way.
One definition of professional is 'a person who knows the right name for the tools'. Based on that, I've known come amateurs who are much better than the pros.
I would like to figure out where to launch the
"Configuration Assistant" that might let me do that.
I know in Windows environment, they are located right
in the Oracle start menu. Actually, if you took a moments gander you might have noticed that the 'Start Menu' is nothing more than a set of shortcuts. There is literally no program 'In' the Start Menu.
Right clicking on the Start Menu shortcut and looking at the properties would tell you the name of the Assistant and that it is located in the ORACLE_HOME/bin directory.
And the nice thing about Oracle is that the names are pretty much the same in Linux, Unix and Windows (and others as well) Due to historic silliness, Windows needs a .exe at the end of the file name, so in Windows it is netca.exe and in Linux it's netca ... and so on.
>
Thanks for any help.Hope the above helps
>
Zach

LSO - XI - Skillsoft integration, how to launch external course

Hi Gurus,
I am working on a scenario where we are launching and tracking web based courses (Skill soft a third party).
Let me give you more details of my scenario.
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) We are following this approach - Client Proxy>XI>Web service(SkilSoft) and it will be synchronous call.
3 ) From portal user should be able to Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
For above approch we have copied a class CL_LSO_WS_XI into a custom and modifying its method to launch the course.
Now I need help on how to pass the parameters like customerid, assetid,courseid etc to PI(XI).
If anyone has worked on similar scenario and has reference code or reference material for modifying the method (of class CL_LSO_WS_XI ) to launch the course, please reply.
Thanks in advance.
Akash.

Hello All,
I am having similar scenario of LSO integration with Skillsoft via PI. I have already referred the PDF XI Configuration for SkillSoft Integration.
The flow of interface in my scenario is
Portal(FrontEnd) <-> ECC(BSP Application at Backend) <-> PI <---> External Learning Vendor(SkillSoft).
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) It will be synchronous call.
3 ) From portal user should be able to register, book,Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
4) Portal is the frontend and backend is the BSP application(ZHCM_Learning).
Can you please let me know the details how you handled this scenario and passed the parameters like customerid, assetid,courseid etc to PI(XI). Also let me know what would be the best approach to follow in this scenario..Is there any BAPI / RFC available for this scenario or need to go via proxy.
Thanks
Shikha

LSO - XI - Skillsoft integration, course launching

Hi Gurus,
I am working on a scenario where we are launching and tracking web based courses (Skill soft a third party).
Let me give you more details of my scenario.
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) We are following this approach - Client Proxy>XI>Web service(SkilSoft) and it will be synchronous call.
3 ) From portal user should be able to Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
For above approch we have copied a class CL_LSO_WS_XI into a custom and modifying its method to launch the course.
Now I need help on how to pass the parameters like customerid, assetid,courseid etc to PI(XI).
If anyone has worked on similar scenario and has reference code or reference material for modifying the method (of class CL_LSO_WS_XI ) to launch the course, please reply.
Thanks in advance.
Akash

Hello All,
I am having similar scenario of LSO integration with Skillsoft via PI. I have already referred the PDF XI Configuration for SkillSoft Integration.
The flow of interface in my scenario is
Portal(FrontEnd) <-> ECC(BSP Application at Backend) <-> PI <---> External Learning Vendor(SkillSoft).
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) It will be synchronous call.
3 ) From portal user should be able to register, book,Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
4) Portal is the frontend and backend is the BSP application(ZHCM_Learning).
Can you please let me know the details how you handled this scenario and passed the parameters like customerid, assetid,courseid etc to PI(XI). Also let me know what would be the best approach to follow in this scenario..Is there any BAPI / RFC available for this scenario or need to go via proxy.
Thanks
Shikha

LSO - XI - Skillsoft integration, launch course

Hi Gurus,
I am working on a scenario where we are launching and tracking web based courses (Skill soft a third party).
Let me give you more details of my scenario.
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) We are following this approach - Client Proxy>XI>Web service(SkilSoft) and it will be synchronous call.
3 ) From portal user should be able to Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
For above approch we have copied a class CL_LSO_WS_XI into a custom and modifying its method to launch the course.
Now I need help on how to pass the parameters like customerid, assetid,courseid etc to PI(XI).
If anyone has worked on similar scenario and has reference code or reference material for modifying the method (of class CL_LSO_WS_XI ) to launch the course, please reply.
Thanks in advance.
Akash

Hello All,
I am having similar scenario of LSO integration with Skillsoft via PI. I have already referred the PDF XI Configuration for SkillSoft Integration.
The flow of interface in my scenario is
Portal(FrontEnd) <-> ECC(BSP Application at Backend) <-> PI <---> External Learning Vendor(SkillSoft).
1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI).
2) It will be synchronous call.
3 ) From portal user should be able to register, book,Lauch, or Track the course and will get response back to SAP LSO system/portal from Skill Soft.
4) Portal is the frontend and backend is the BSP application(ZHCM_Learning).
Can you please let me know the details how you handled this scenario and passed the parameters like customerid, assetid,courseid etc to PI(XI). Also let me know what would be the best approach to follow in this scenario..Is there any BAPI / RFC available for this scenario or need to go via proxy.
Thanks
Shikha

Where idoc_output_ordrsp is launched

Similar Messages

Maybe you are looking for