Where in BAT for "Users Associated with Line" field......

Hi All,
I am trying to find where I can export all user lines via BAT to see if they have an assignment for “Users Associated with Line”.
Basically, I have administered approx 1000 phones (some UDP and some not) however I was unaware that I needed to administer this field for CUPC etc….
I have looked at other posts that explain to update line appearance under the “Users” in BAT however this does no contain the field that I am looking for.
In essence, I need to export all user lines, wash the data for who is not administered for this, then BAT in a change to associate users with line.
Any help much appreciated!

Hi,
I use phones first and than the users option to upload using BAT.
In th phone's tab, edit the the Maximum number of phone lines according to your requirement and click on the Create file format and select Directory Number in the Line field as shown below.
And create your phones with MAC, Description,Phone lines and upload it, make sure it gets uploaded successfully.
Now come to Users tab in the Bat.xlt file, here click on the Number of Controlled Devices as 1 (we are basically making phone as the controlled device to the users, phone already has lines as mentioned in the above step). And fill rest of the other details and upload it.
Note: You can mention the Primary extension and IPCC Extension as part of this operation only.
Hope it helps.
Anand
Please rate helpful posts by clicking on the stars below the right answers !!

Similar Messages

Users Associated with Line CUCM9

Our wonderfull HR Staff ran a script that wiped out our IP phone field in AD over the weekend. All of the user accounts got wired out by th e garbage collector before anyone knwe that this has happened . I have afull export from a month ago and was able to get the Owner User ID added to the devices, and the primary and IPCC phone extensions restored. I'm trying to find a way to get the Users Associated with Line filed populated using bulk Admin. I cannot find where to do that. We are running CUCM 9.1
Thanks for any help.

Hi Michael,
You can try the following steps and let me know how it goes.
Create a .txt file format with the following headers, comma separated:
    User ID,Device,Directory Number,Partition
In the lines below the headers, add the corresponding information, comma-separated.
Example, assuming you want to associate user1 to directory number 1001 and user2 to directory number 1002:
        User ID,Device,Directory Number,Partition
        euser1,SEP001122aabbcc,1001,PT-A
        euser2,SEP002211aabbcc,1002,PT-B
You can use Excel to create the file. Save as a .csv file, then rename the file to .txt. Open it to make sure the format matches the one above.
Then got to CallManager Admin Page -> Bulk Administration -> Upload/Download Files, hit "Add new", browse to your file, then select the following targets:
Target: User Line Appearance
Transaction type: Update Line Appearance - Custom File
Verify that the file has been uploaded, then go to Bulk Administration -> Users-> Line Appearance -> Update Line Appearance.
* Under "File name", drop down and select the file you uploaded.
* Do not add any of the checkmarks below, leave empty.
* Click the "Run immediately" radio button.
* Click "Submit"
HTH
Manish

Slow email send/receive for user associated with beehiveonline

It takes hours to send/receive an email to/from the user associated with my beehiveonline workspace. Also, the number of emails that we receive has decreased, it may be not related at all, but there is no way for me to check if that's just due to low customer activity or to timeouts.

Hi,
If you have issues then let us know the date/time of the issue and the degree of delay you are seeeing and we can check if there may be a reason for the delay.
Phil

Users Associated with Line

We will be integrating our UCM 6.1.2 with CUPS 6.x with MOC as the client. On the DN page of the UCM right at the bottom is a button titled 'Associate End Users'. As per the documentation this is required but I still am wondering if this association is really necessary as I will need to update all of our users via BAT csv which will be a lot work provided it can be done via BAT? The users page has an entry under device associations and the primary extension under directory number association has an entry as well so hopefully this will suffice.

Hi
I have User Device Profile and I need to associate Users with Line. I have created file with format
User ID
Device
Directory Number
Partition
ADOUGLAS
UDP_Alexandra_Douglas
22847
PA_POV_OnNet
When I run it I keep on getting the error
user id Error Code Error Description
ADOUGLAS On row 1: bad device name
Result Summary :
Update for 0 Line Appearance passed.
Update for 1 Line Appearance failed.
End Time : 06/29/2010 15:33:20
Thanks

ISupport - register a person as a user associated with his/her Person Party

Hi,
iSupport 11.5.10.2
I have a situation in my organisation where I would like to register an individual as an iSupport User associated with his / her Person Party Number.
For example: John Doe has been set up in the system as a Person Party, and has an Account Number generated. He has certain Service Contracts and Install Base records associated with the Account Number. John Doe would like to register through the iSupport portal and be associated with the above Party / Account Number and be able to update his IB, check Orders and Invoices.
Can this be done using any of the existing (seeded) Usertypes, Enrollments etc.?
Thanks and Regards.

This cannot be done in 11.5.10.
But we have this feature in R12.

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

WiFi User associating with far AP not with near AP

Hi,
We have two WLC 4402 and around 20 APs model1252G, I have manually distributed between both WLCs.
Problem which I am describing is only associated with single user. User have three APs in its surrounding, AP "One" is placed near by 10 feet, AP "Two" is placed on above floor (with same location) and AP "Three" is placed on below floor (on same location). I am using 1, 2, 6, 11 non-overlapping channels and did not assign same channel on two floor continous.
Problem:
User associating with far AP but not with near AP, due to this user faced low strength. I have increased AP "One" power but it does not worked out.
Need help.
Many thanks in advance.
Regards,
Arsalan

Hi Arsalan,
Thanks for the reply!!
Yes we can configure that!! This feature name depends on the WLC software that you are running..
If ur WLC is running 4.2 WLC code and below.. then thisfeature is called WLAN OVERRIDE , here is the link to do it.. (find for WLAN override 2nd search you will find the feature info and config as well)
http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a00808b4c61.shtml
if ur WLC is above 4.2 or later, then its called AP-Grouping. here is the link..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
lemme know if this answered your question..
Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

How can I get all users associated with my VSO

I see here: https://www.visualstudio.com/en-us/integrate/api/shared/profiles that I can get my profile info from the API, but can I get all users associated with an account?

Hello!
If you want to see all of that in a single mailbox, you can create a Smart Mailbox from the "file" menu in the top left corner of your screen. It's a bit of trial and error before you get the rules correct, perhaps, but that will work.

I need a field like "System.RelatedLinkCount" but where the count is linked items with a field in a certain state

I need a field like "System.RelatedLinkCount" but where the count is linked items with a field in a certain state.
e.g. I've got a WI with a field on it that tells me how many active bugs are linked to it. (I'm not actually counting active bugs, but hopefully you get the idea).
The only way I can think to do this is with a TFS plugin and catching the workitemchanged event. I'd prefer to do this entirely in the WI if possible? is there a way to do this? Thanks

Hi TimB33,
Thanks for your post.
As far as I know there’s no default WI rule support to get the specific WIT linked count, I think you need to create your custom work item control to achieve that if you want this field.
For this scenario, please submit it to User Voice site at: http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate them
seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I create a form for users wherein the text field will expand to accommodate additional text?

How can I create a form for users wherein the text field will expand to accommodate additional text?

You need to use LiveCycle (PC Only) to create a dynamic form like that.
The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)

One pr for multiple materials with line items while running mrp

Hi SAP gurus,
              I am config the system for MRP as per my client requerement.
                 We use CBP for different RAW materialsfor example they having a 10 materials for planning,were,
         MRP type is VB,
          LOT size is FX,with Different Reorder points and fix order quantity for all materials,
         My client whant run MRP for all these materials in single time that means they whant multiple item at single levels,
        i soles these requirement with the help of Product Group(sop) and its working but when we running md02 for product group all materials have planed and they give different purchase requistion numbers for all these materials but my client Wants single purchase requistion with line items for all these materials.
     Pls give me the solution for that requirement.
thanks and Regards,
abhi

this is not the way SAPs MRP run works.
Where is the benefit for this?
the requisitions are not even split into header and item table, it is just one table EBAN, and either way you would get exact the same number of records in EBAN.

Query for 'User Activity' Webi Line Chart using BO4.0 Auditor

Need to create a webi line chart to measure ‘user activity’ per month, year or day using BO4.0 Auditor on Oracle.
This question raises two sub-questions:
What actions constitute user activity? Is it concurrent logins by users? I am confused if that would really give a true picture of user activity as users can log in and do nothing on the BO system.
If concurrent logins do in fact give a true picture of user activity then how do I go about creating a chart? What objects do I need to include in query?
Please provide feedback?
Thank u.

Hi Ramil,
Follow below steps to create a webi report for your requirement, launch Webi rich client and create a new webi report by selecting "BOEXI40-Audit-Oracle" (Audit universe)
1) Select below objects in 'Result Objects' pane
[Event Year], [Event MonthName],[Event DayofMonth], [Event Type], [User Name], [Total Event Count]
2) Define below conditions in "Query Filter" pane
[Event Type Id] In list 1015 AND [Event Year] In list "Select Year" (Prompt)
3) Run query
4) At report level create a new variable of type measure with the name "User Activity" with below formula
=Count([Total Event Count]In([User Name];[Event MonthName];[Event DayOfMonth]) )
(This formula will track logout event of a each user in a day as well as in a month, it will take/count only one log out event of the user in a day as you desire)
5) Create a table block as well as graphs as you desire
i) For day wise user activity create a table/graph using: [Event DayofMonth], [User Activity]
ii) For month wise user activity create a table/graph using: [Event MonthName], [User Activity]
Let me know if you have any questions
~Manoj

Best Architecture for Fortran Code with Line Numbers

Hi all,
I have large fortran 90 file (10+ pages) which I need to convert to LabVIEW.
It contains several branching statements with Line Numbers, e.g.:
1000 IF (condition) goto 2000
I would like to know what is the best architecture to deal with this branching of the program.
Should I break the sections (based on line numbers) into user events or states?
Has anyone done similar conversions?
Cheers,
Battler.

battler. wrote:
Hi all,
I have large fortran 90 file (10+ pages) which I need to convert to LabVIEW.
It contains several branching statements with Line Numbers, e.g.:
1000 IF (condition) goto 2000
I would like to know what is the best architecture to deal with this branching of the program.
Should I break the sections (based on line numbers) into user events or states?
Has anyone done similar conversions?
Cheers,
Battler.
I would insert a preliminary step where I would assign a descriptive name to each line number that is the target of a branch. The names become the names of the states (like Christian was hinting at) then diagram the code into a state transition diagram. The rest gets passed to a developer to complete.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Taking too much time for saving PO with line item more than 600

HI
We are trying to save PO with line items more than 600, but it is taking too much time to save. It is taking more than 1 hour to save the PO.
Kindly let me know is there any restriction for no. of line items in the PO. Pls guide
regards
Sanjay

Hi,
I suggest you to do a trace (tcode ST05) to identify the bottleneck.
You can know some reasons in Note 205005 - Performance composite note: Purchase order.
I hope this helps you
Regards
Eduardo

ALV Report for multiple headers with Line Items

Hi Sap All.
here i have got a requirement to change the exisiting Zprogram which writes all the header information with line items in a normal simple report,now i have got to change the program in order to display in an ALV Format .
in the exisiting program they are using EXTRACT ,INSERT Statement and multiple select statements for getting the values into each field ofheader and line items for writing in a simple report.
so ijust want to know how i can populate all the data into alv grid.
can any one help me in this.
regards.
Varma

you have to store all header records in an internal table and all item records in a second table
then you call function module REUSE_ALV_HIERSEQ_LIST_DISPLAY with both parameters T_OUTTAB_HEADER and T_OUTTAB_ITEM

Where in BAT for "Users Associated with Line" field......

Similar Messages

Maybe you are looking for