Where in PS or Bridge CS6 is the 'find similar' function - or is this being held back for CS7?

A sneak peek showed a facility that you'd soted to find the coke symbol in every photo, or railings or someone's face. That seemed quite useful. I can't see where it is in CS6 so will you be holding that back for 6 months and charging us again to upgrade to it?

Thanks Conroy. It's really easy, once you explained it. I always tried to click on the contours while the library was opened. But i should have just clicked on it when the library was closed so that only one contour is visible. Thanks again!

Similar Messages

I'm trying to run an update for bridge CS6 and the dialog keeps telling me to close bridge first even though Bridge isn't open

I'm trying to run an update for bridge CS6 and the dialog keeps telling me to close bridge first even though Bridge isn't open

Bridge is probably running in the background.
Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

Where is With Time Capture box in the Find panel?

I need to find some photos by using capture dates. I know that I have to select With Capture Date in the Find panel of the Library module, but I can't find it... Does the Find panel is really what appears when you do "cmd + F"?
Thank you!

You can use the library filter (there's a capture time column) or create a
smart collection using the capture time as a criteria.
2012/11/19 kimcirque2012 <[email protected]>
Re: Where is With Time Capture box in the Find panel?
created by kimcirque2012 <http://forums.adobe.com/people/kimcirque2012>in
Photoshop Lightroom - View the full discussion<http://forums.adobe.com/message/4859384#4859384

TS1398 my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build"

When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build" How do i fix this?

I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11 itunes v. 9.0 and I just want it to be restored. I need help. Oh and its an 8 gb ipod touch.

The "Find Faces" function is deactivated on iPhoto 9.5, in OSX Mavericks. Is there any way to activate / deactivate this function?

Hello,
Instead of deactivting the "Find Faces" Function, I would like iPhoto 9.5.1 to run this.
On my MacBook Aluminium Late 2008, running Mavericks 10.9.3 this function is grayed out, and never run.
Is there a way to activate this function?

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
defaults read -app iPhoto PKFaceDetectionEnabled | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

After I download an attachment I have to go to the download window and manually open it, my laptop use to download then automatically open the file, how do I get this feature turned back on?

After I download an attachment from my webmail I have to go to the download window and manually open it, my laptop use to download then automatically open the file, how do I get this feature turned back on?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

I just started having an issue with my bank website working properly. They have told me it is because of the last safari upgrade. Is this being resolved?

I just started having an issue with my bank website working properly. They have told me it is because of the last safari upgrade. Is this being resolved?

You might want to consider "voting with your feet" and taking your business to another bank. When they tell you the upgrade is the problem, it is really their problem and not yours. If you don't want to do that, the suggestion that you try another browser is absolutely correct.

Hello, I can´t active my iPad because appears the following mesage: "Not Enough Storage, This iPad cannot backed up because there is not enough iCloud storage available. You can manage your storage in settings". I did click on Settings but still locked.

Hello, I can´t active my iPad because appears the following mesage: "Not Enough Storage, This iPad cannot backed up because there is not enough iCloud storage available. You can manage your storage in settings". I did click on Settings but still locked.

Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should restart. This will have no affect on your data.

I locked my MacBook from my iPhone with the "find my iPhone" app and now it's asking for a 6 digit passcode

I locked my MacBook from my iPhone with the "find my iPhone" app and now it's asking for a 6 digit passcode

Normally, you d want to connect to computer, iphone had been synced with previously. If computer does not exist you may have to enter phone in recovery mode, just search youtube for iphone recovery.

Rating and labelling images is not working in Photoshop Bridge CS6. The Rating and Label headings in the Label menu are greyed out. Any ideas for correcting this would be appreciated.

Any suggestions for restoring the Rating and Label options in Photoshop Bridge CS6 would be appreciated.

Please post Bridge related queries over at
http://forums.adobe.com/community/bridge
Maybe it’s permissions issue … what volume are the files on?

Why the Finder Search-Function is corrupted in Mavericks so that I cannot open any file after searching it?

Finder Search-Function is troubled / corrupted / misfunctioning
When keying in a search word the files are selected properly, yet not shown with details. Furthermore you cannot click and open any file. Also sorting is not possible.
Anyone else has such a problem and has figured out on how to resolve it?
(Spotlight works properly and is somehow a spare solution).
There seem to be many basic problems with the finder in Mavericks, this problem unfortunately has not been resolved also with the last software-release 10.9.2.
The quality strategy of Apple has to be questioned: I do not need 200 NEW functions, but I need the previous basic functions STILL working!
Thank you!

As a cross-reference:
Eric Root
Re: Hi! I have a problem with finder
01.03.2014 12:14 (in response to Fexei)
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.finder.plist. Move the .plist to your desktop.
Re-launch Finder by logging out/in and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.
Resolved the Problem! Thanks to Eric and Leonie
Felix

My iPod touch 4 is not operating. Whenever I try to type in my pssword, the logo shows up. And this just goes back and forth. What should I do??

This started a week ago, I turned off my ipod, and it could not be turned back on again. So I held the sleep button and the home button simultaneously for ten seconds, and my iPod responded, the logo appeared. And my iPod worked perfectly for a week, when the same problem appeared last night, I tried to use the tip which I used last week. But a new problem appeared. The logo showed up, and when I tried to type in my password, the logo appear on the screen again, and this just goes back and forth. I can't type in my password. This is driving me crazy, Pleeeeaze, someone please help me!!!!

Have you tried connecting the iPod to your computer and restoring the iPod?

Is there is a way to change the "Find and Replace" feature in Numbers 3.2 back to the way it used to be on Numbers '09 version 2.3?

In order to view my documents on my newly purchased Macbook Air I recently had to upgrade my 27" iMac to Numbers 3.2. The new version does fine for what I use it for except the new "find and replace" feature...It is TERRIBLE! It is so much slower than the older version. Plus I loved how the older version showed a table of all the matching word or items you're searching for and you could easily scroll through them to find the one that you were searching for.
My question is: Can you change the Find and Replace feature back to the way it used to be in version 2.3 or Number '09? If so, please show me how. I would really appreciate it.
The image below shows the new version on the left and the old version on the right just in case you don't know what I'm talking about...
Thank you.

Hi The.Gav,
Sad to say, but that feature has gone in Numbers 3.2
This discussion may help (or not)
Numbers - How use Find like the previous version?
Regards,
Ian.

Microsoft Word API for Mac OS: Troubleshooting the Find/Replace function

In my previous topic at
http://discussions.apple.com/thread.jspa?threadID=2623068&tstart=0
we found out the way to connect to the Ms-Word from Objective-C through ScriptingBridge.
The connection works and the given text can be found and replaced using the method executeFindFindText: Although it generates exception and I am forced to put it in @try block and then continue with everything else in @catch.
There is another, more important problem: the WordFind class does not seem to "give feedback" i.e. I could not find the way to programatically find out whether my find/replace was successfull, nor could I set WordFind object properties prior to running.
The Class WordFind has many properties e.g.
@property (copy) NSString *content; // Returns or sets the text in the find object.
@property (readonly) BOOL found; // True if the search produces a match.
@property BOOL matchWholeWord; // Returns or sets if the find operation locates only entire words and not text that's part of a larger word.
I tried to set the property "matchWholeWord" or read the properties "found" and "content" but in vain.
As I understand, the property "found" should be the key component in my process because it should
return the BOOL value I need.
What am I doing incorrectly? Any suggestions?
Here is the final code:
#import <Cocoa/Cocoa.h>
#import "Word.h"
int main(int argc, char * argv[])
if(NSApplicationLoad())
NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
wordApp=[SBApplication applicationWithBundleIdentifier:@"com.microsoft.Word"];
if([wordApp isRunning])
WordDocument *activeWordDoc=[wordApp activeDocument];
WordTextRange *allTextRange=[activeWordDoc textObject];
WordFind *findObj=[allTextRange findObject];
NSString findText=@"FirstText";
NSString *replaceText=@"SecondText";
[findObj setMatchWholeWord:YES];
NSLog(@"WholeWord: %i", [findObj matchWholeWord]);
@try
[findObj executeFindFindText:findText
matchCase:NO
matchWholeWord:NO
matchWildcards:YES
matchSoundsLike:NO
matchAllWordForms:NO
matchForward:YES
wrapFind:WordE265FindContinue
findFormat:NO
replaceWith:replaceText
replace:WordE273ReplaceAll];
@catch(NSException * e){
NSLog(@"Search Found:%i",[findObj found]);
NSLog(@"Search Content:%@",[findObj content]);
[pool drain];
return 0;

DavidMan wrote:
So, what is your suggestion?
Do it in pure AppleScript.
Whom to complain? Microsoft or Apple?
I'm not sure. All this stuff was new with Office 2008. It might work better with Office 2011. I would definitely ask on the Mac Office forum to see if anyone there knows any more: http://www.officeformac.com/productforums/

Where in PS or Bridge CS6 is the 'find similar' function - or is this being held back for CS7?

Similar Messages

Maybe you are looking for