Where in PSE11 are the People tags I created in PSE10?

Just loaded Photoshop 11. Face recognition names appear not to have been brought over. Hints on how to bring them across?
Message title was edited by: Brett N

First try View>Show People in Tags panel.

Similar Messages

Is there a site-wide title tag that I can edit or are the title tags specific to each individual page?

Is there a site-wide title tag that I can edit or are the title tags specific to each individual page? I'm working on my title tags for Destination West at http://xibuhaohua.com and as you can see, it is in Chinese here as 西部豪华 but it's English here at Destination West. So, I'd like to know if I can edit each separately because I think they should be in different languages.

You can set the title for each page in the Page Properties dialog.
Note that on a master page, you can set a page title prefix or suffix if you'd like all your pages using that master to share a title prefix or suffix.

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time .

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

What are the impact if we create usernames with spaces?

Hi All,
What are the impact if we create usernames with spaces? We tried and we were able to create in Oracle, But does it impact anywhere else.?
Thanks in advance

Having spaces might cause issues -- Please search MOS or the following docs for "229407.1"
11i to R12: Bank Statement Line Errors FRM-40654, Work Around, Afchrchk.Sql [ID 758964.1]
Receipts Workbench Error: Listing of FRM Errors [ID 1361887.1]
Reconcile Bank Statement Lines Error: FRM-40654 Record Has Been Updated. Requery Block. [ID 1408768.1]
11i : Applications DBA Trailing and Leading Spaces Data Collection Test [ID 229407.1]
APXINWKB - FRM-40654 When Attempting to Place Imported Invoice On Hold [ID 429329.1]
11i to R12: Bank Statement Line Errors FRM-40654, Work Around, Afchrchk.Sql [ID 758964.1]
FRM-40735 and ORA-20001 Errors When Changing any Field in Define Item form [ID 206749.1]
Cannot Modify Product Family Allocation Details, Receive Error FRM-40654 [ID 438926.1]
"Could not reserve record" Error Appears When Trying to Update Purchase Orders [ID 781845.1]

Where are the standard icons while creating a screen?

Hi guys,
Can anyone tell me where I can find the standard icons 'display', 'change', 'delete', 'create' in screen painter se41 when I create a screen?
Thanks!

HI
Can anyone tell me where I can find the standard icons 'display', 'change', 'delete', 'create' in screen painter se41 when I create a screen?
All you need to createa PF-STATUS for your report by using t-code SE41(menu Painter) in that Status you are suppose to create these buttons
Regards
Pavan

When I send a group txt and one of the people reply it creates a new message. How do I keep all the replies in the same message? I used to not have this problem but it started last month.

When I send a group txt and one of the reciepients replies it creates a new message. How do I keep all the replies in the same message?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

What are the pixel dimensions for creating an Apple ibook book cover?

I'm trying to create a book cover for Apple ibooks, what are the pixel dimensions requirements?

Thanks again.
Apple seems to have made it more confusing than it should be.
As an aside, the Apple documentation contradicts itself.
Cover art (also known as a marketing image or jacket) should be at least 1400 pixels along the smaller axis and must be a JPEG or PNG file in RGB Color mode.
This clearly says the shorter side must be at least 1400 pixels. The next sentence says this:
For an average trade paperback, this could be 400 x 1400 minimum size, as the books are generally taller than they are wide.
That doesn't make sense, seeing that the shorter side is supposed to be at least 1400 pixels, meaning it should say "1400 x 4900" for the same aspect ratio.
...I did notice this too.
So, if as you say, that the Cover Art and Cover image terms are the same and the 2 million limit does not apply, then it is unclear to me why Apple sent this message to me about cover file being rejected
"Action Required: Your book could not be delivered to the iBookstore.
The following images are larger than two million pixels and must be resized:
Full ePub: Cover_xyz.jpg "
I'll probably need to have the cover file in epub and Cover Image for Asset in iTunes Producer be named differently (but be copies of the same file) so I can understand which one is the "problem" file.
And finally, why does Apple refer to Cover Art twice here and then end in last sentence with Cover Image if they are the same ( and if they are the same why not state "this cover image").
"Cover art (also known as a marketing image or jacket) should be at least 1400 pixels along the smaller axis and must be a JPEG or PNG file in RGB Color mode. For an average trade paperback, this could be 400 x 1400 minimum size, as the books are generally taller than they are wide. For best results, deliver the largest pixel dimensions possible. When possible, match cover art to the cover contained in the book file. The 2 million pixel maximum does not apply to the cover image".

What are the best practices to create surrounding borders?

Good day everyone,
I was wondering what is the best practices to create a look in my iOS app like the one below? How are they accomplishing the creation of the borders, is there a tool in Xcode IB to do that?
Thank you in advance

Once again thanks for your input, however I am still not clear how you have accomplish the rounded corners, you do not mention that in your reply.
I did some research on my end and I was able to accomplish what I want with a UIView using the code below in an outlet:
redView.layer.cornerRadius = 10;
redView.layer.borderColor = [UIColor greenColor].CGColor;
redView.layer.borderWidth = 5;
However, I cannot do the same for the UITableView or UITableView cell.
Thanks

What are the alternative technologies to create mobile website?

I have never created a mobile website but have some experience using WML. I jst wanted to find what are the other alternatives and whether standard websites using php wouldn't work on mobile??
Please let me know
Thanks
Uthay

It's been my experience that many mobile phones lack certain client side technology support. By definition, server side technologies are not dependent on the client. Having said that, since we are on the Java forum I'll also suggest that Java itself has a lot of support on mobile phones (client side), so you could still have a lot of device support if you target that. For maximum support, I'd stick to server side for the complicated stuff.

What are the function modules to create a follow on documents for SC

Could any one please tell me What are the function modules ( like PO , Preq ...) to create a follow on documents for Shopping Cart?
Thanks
Murali

Murali,
That depends on what scenario you've got implemented.
Classic scenario: FM BBP_REQREQ_TRANSFER
Extended classic: FM BBP_PD_PO_CREATE
Regards,
Franz

Where do I change the dpi settings for creating a jpg in Bridge CS5?

I upload jpgs to an online site to be viewed in a browser. I've been using Bridge CS5 to batch process the jpgs from high quality pdfs.The settings I see when I do the settings to create the jpgs will only give me Maximum settings and the option to set it on 12 but when I open the jpg that's created in Photoshop, it's still 72. I would like to have at least a 150 dpi setting. I've searched and can't find any help online. What am I doing wrong, or isn't there any place to give me the option to change the settings to a higher dpi in Bridge? If this isn't possible, what do you suggest to make the process go faster? I'm using the Adobe CS5 programs.
Thanks in advance for any help.

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

Where do I find the OS files to create Recovery CD?

Dear Sirs,
I want to reinstall the Notebook. Where do I find the windows Files (to burn them) on the hard disk?
I only find the Tools CD from Toshiba.
But not any folder concerning the Operating system
Perhaps someone can help me
Greetings
Patrick

Hello Patrick
With your unit is also delivered RECOVEY media. This DVD contains operating system and stuff you need. Using this media you will set notebook to factory settings.
If you use it to install OS again HDD will be formatted and you will lose all your data. Because of that back up all important data before you start with recovering procedure.
If you need more assistance please write again.

What are the legal issues to create website

Could I use Cirrus to create my own video chat website? What are the legal issues?

Hmm...
"The delivery-on-demand client is programmed to place HTTP GET requests with content capturing component. Content capturing component is programmed to render and process HTTP GET requests coming from delivery-ondemand client."
Adobe doesn't use GET/POST in RTMFP. It's a streaming protocol.
"Another aspect of the present invention is that, once cited a specific video channel number, the resource locator server connects web browsing applications directly to delivery-ondemand client in peer-to-peer fashion"
Adobe doesn't use "Video Channel Number", more over the authors need to clarify how "resource locator server" in their "invention" "connects" web browsing application "directly" to the "delivery-ondemand client". In Stratus peers have ability to discover themselves automatically in some situations.
"The content capturing component is programmed to determine the most efficient rate of packet transmission for each connected delivery-on-demand client."
- Wow, invention indeed! I think Adobe should ask clamants to present the code snippet for this "most efficient" transmission.
I'm sure Adobe lawyers will find many other holes in the this so called "patent". Let's wish the authors of this "invention" to finish the work and implement and grow it to something more serious then just few generic claims.

Are the META tags in a pdf file visible by search engines?

I have several hundred newsletters in pdf format on a website.
I am in the process of entering META tag information (title,description,keywords) through the Properties panel of each pdf file. Is this information that will be visible by search engines in a WordPress site?
I ask, because every post in WordPress has a place to enter keyword tags. The problem I'm having in WordPress is that every post shows the tag information rather than making it invisible. If the properties information in the pdf file does the same thing, I won't bother with entering it again in WordPress.
Thanks to anyone who might have insight into this question.
Many thanks!

It is a high order probability that your SQL's report generator is creating the PDF, not Acrobat (which by design and EULA cannot be used in as/with server).
That the report generator outputs to an old-old version of PDF bears this out.
Wiki articles on PDF are very nice for those high level intro summaries.
To know / understand PDF you purchase and study the ISO Standard for PDF (ISO 32000-1:2008).
Rather than "PDF validation" you may want to consider addressing the appearent root cause of the problem(s).
You can change the email2fax application to one that can deal with older PDF versions.
You can change the report generator to one that can output to the ISO Standard.
(Perhaps the in-use application can be configured to output to the current version of PDF (i.e., the ISO Standard).
Be well...

Where in PSE11 are the People tags I created in PSE10?

Similar Messages

Maybe you are looking for