Where in the 12c grid control that it supports 11r2 database. Thanks

Yes 11gR2 databases are supported for 12c.
11.2.0.4.0,11.2.0.3.0,11.2.0.2.0,11.2.0.1.0
Going forward you can check the certifications matrix information for OEM by following,
Login into My Oracle Support page > Click on Certifications tab >
Choose [Enterprise Manager Base Platform - OMS] or [Enterprise Manager Base Platform - Agent]
Select the Release [12.1.0.2]
Press Search Button.
Refer the following Enterprise Manager Certification Matrix document:
How to Find Certification Information for Enterprise Manager Grid Control and Enterprise Manager Cloud Control (Note 1402255.1)
Understanding Enterprise Manager Certification (Certify) in My Oracle Support [Note 406906.1]
HTH
Mani

Similar Messages

Urgent : how to select the rows in the ALV Grid Control

How to select the rows in the ALV Grid control,
I am facing the situation where i need to select the row/rows in the Grid control and then to lock the entries,
If anyone have the solution please help me out
Its very Urgent

Hi Bharath,
Go through this hope u can understand.
SEL_MODE. Selection mode, determines how rows can be selected. Can have the following values:
A Multiple columns, multiple rows with selection buttons.
B Simple selection, listbox, Single row/column
C Multiple rows without buttons
D Multiple rows with buttons and select all ICON
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
 IMPORTING
 et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
 CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
 EXPORTING
 textline1 = 'You must choose a valid line'.
 EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
 READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
 ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
 CALL METHOD go_grid->set_selected_rows
 exporting
 it_index_rows = gi_index_rows.
ENDIF.
Reward points if helpful.
Thanks
Naveen khan

Monitoring oracle database from OEM 12c grid control

Hi,
I am using OEM 12c grid control to analysis various server's performance. The application database in oracle database v11g. Is there any problem if i add database on oem to monitor? To be more clear, If it creates any conflict between database's em and oem's em when i want to deploy em agent on database ? Is it necessary to remove database's EM before installing oem agent on it?

Rakesh,
Please refer to the following links:
SOA and Middleware Management
http://www.oracle.com/technology/products/oem/prod_focus/soa_mgmt.html
New Oracle Enterprise Manager Management Pack for SOA and Middleware Management
http://blogs.oracle.com/oem/2009/06/new_oracle_enterprise_manager_1.html
ORACLE ENTERPRISE MANAGER 10g: ORACLE MANAGEMENT PACK PLUS FOR SOA
http://www.oracle.com/technology/products/oem/pdf/ds_soa_mgmt_pack.pdf
Regards,
Hussein

SQL Server monitoring with 12c Grid control

Dear Gurus
I want to add my sql server databases in 12c Grid control. for this i have deployed the sql server plugin in 12c grid control but i am unable to add the sql server databases/ servers in 12c grid control.
Could you please help me in deploying the sql server servers in 12c grid control.
Thanks & Regards,
Satish Kumar Sadhu

Dear Jan,
Already I have added the plugin but while adding the target i am getting below error. Can u please give some idea on this
Test Connection failed: [_WinAuthDLLToLoadDynamicProp;em_error=DLL file 'D:\12c_agent\plugins\oracle.em.smss.agent.plugin_12.1.0.2.0\scripts\emx\microsoft_sqlserver_database..\..\..\..\dependencies\oracle.em.smss\jdbcdriver\sqljdbc_auth.dll' is found missing or not was never copied manually. Please copy amd64 version of sqljdbc_auth.dll at the above location and re-try, MSSQL_NumClusterNodes;Can't resolve a non-optional query descriptor property [dllFile] (dllFile), WbemRemote_Determination_DynamicProperty;Can't resolve a non-optional query descriptor property [dllFile] (dllFile), MSSQLInstance_TestMetric_DynamicProperty;Can't resolve a non-optional query descriptor property [dllFile] (dllFile), OSType_TargetHost_DynamicProperty;Can't resolve a non-optional query descriptor property [STDINWBEM_HOST] (ms_sqlserver_host), MSSQL_NumClusterNodes;Can't resolve a non-optional query descriptor property [dllFile] (dllFile)]

12C Grid Control Backwards Capablity

Does anyone know if 12c grid control is able to support the 11g R1 microsoft windows server 2008 x64 Oracle database?

Once the agent for windows is released there will be more details about what specific versions of Windows and Databases are supported. Release Schedule of Current Enterprise Manager Releases and Patch Sets (Doc ID 793512.1)

Where is the resources section now that was in this site now?

Where is the resources section now that was in this site, which included various videos, books, tutorials or sources of them to learn about Eclipse

Firefox 4.0 has a combined Reload, Stop, & Go button that appears at the right end of the location bar. Only one function is ever active at any one time, so combining them save UI space was a good idea. When a page is loading, it is a "Stop" button, when it finished loading, it turns into a "Reload" button, and when you start to type something into the Location bar it turns into a "Go" button.
To restore the Firefox 3 appearance you can use these steps:
* Open the "View > Toolbars > '''Customize'''" window or right-click a vacant area on a Toolbar, ''except fot the Bookmarks Toolbar''.
* Then drag'n'drop the Reload and Stop buttons to their previous position at the left side of the Location bar.
# Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
# Or "Reload - Stop" then put a flexible space in between the two to prevent the buttons from combining.
# Set the order to "Stop - Reload" to separate them and get two distinct buttons.

I bought the 64 GB iPhone 6 today. I backed it up and used 4 GB according to my phone but according to my computer i have used 3.4. I should have 60.6 GB but my phone currently says i have 51.9 GB remaining .Where is the 8.7 GB that I am missing? An

I bought the 64 GB iPhone 6 today. I backed it up and used 4 GB according to my phone but according to my computer i have used 3.4. I should have 60.6 GB but my phone currently says i have 51.9 GB remaining .Where is the 8.7 GB that I am missing?

Most of it is iOS itself and the apps included with it. App Data, pictures in your Camera Roll, emails can account for the rest.
Settings > General > Usage > Storage shows you how much data each app uses.

Can Grid Control 10gR2 create a standby database when primary db uses ASM?

Does anyone know if Grid Control 10gR2 will be able to create a standby database when the primary database uses ASM for data files, redo log files, and archive log files but the standby database will use mounted disks? If it can, would it matter that the primary db will be a RAC cluster and the standby will be a single instance db?

I appreciate your reply and hope you are correct. Have you had a look at the 10gR2 Grid Control to confirm this or are you only going on published statements? The reason I ask is because previous versions of Grid Control claimed to support ASM but they would only allow you to work with them AFTER you had created a standby database manually but you couldn't actually use Grid Control to create a standby database from a primary database that had its log files on ASM disks.

Can Grid control 11g monitor Oracle 9i database

Can Grid control 11g monitor Oracle 9i database? This is on Linux5.7
Thanks for the help
s.

Yes but Enterprise Manager 11.1 Grid Control requires the 11.1 Agent.
Then go to the Targets tab, then Databases. It should self-discover the 9i database.
Also see Advanced Uses of Oracle Enterprise Manager 11g
http://www.oracle.com/us/products/enterprise-manager/advanced-uses-em11g-wp-170683.pdf
>
Oracle Secure Backup protects not only Oracle Database 9i, 10g and 11g,
Grid Control supplies a common, standard interface to set up and manage Oracle Data Guard for Oracle Database 9i, 10g and 11g databases

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Hello,
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
http://support.apple.com/kb/HT5444

TS2446 I forgot the security question about what was my first car and what is my favorite car! What is the solution to change that? please help me, thank you in advance Leo

I forgot the security question about what was my first car and what is my favorite car! What is the solution to change that? please help me, thank you in advance Leo

If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)

Why 12C Grid Control shows Target status down/Unavailable?

Hello,
The grid control 12.0.2 on Oracle Linux 5.9 shows that status of target /EMGC_GCDomain/GCDomain/EMGC_ADMINSERVER as down where as it is up and running and I can log into admin console.
Please note that repository, OMS, weblogic all components are on same server.
It is also showing that following are unreachable where as these are up on same server
EM Website System
Management Services and Repository
How can I diagnose and fix this? Where to start?
Thanks.

Have you checked the agent status with emctl status agent? Is the OMS available there and when was the last upload time?
You can also try emctl upload agent and see if this helps.
Is the dbsnmp account unlocked with correct password in the target database?
rgds
Kjell

Where is the remote volume control in the new ITUNES - I cant adjust my volume control remotely on my Zepplin Air anymore

Hi I have downloaded the new itunes 12.01 - since then I have had nothing but trouble with my Zepplin Air. Now I cant remotely change the volume control on it, only being able to change it on my connect

I did try that too (was already turned on). It seems like this is a big step backwards, since even if control center worked in YouTube, it requires stopping the video, opening the control center, closing it, and restarting the video. Very counterproductive to simply restoring a volume slider on the basic You Tube controller, next to the timeline slider. Again, I appreciate the help. For now, I can use the buttons on the side of the iPad (not as convenient), and hope a newer version of You Tube will restore volume controls that work in next upgrade.

Allow to erase values under the input-check of the ALV Grid Control

Hi, 
in my ALV Grid I do have a cell which automatically checks the values entered by the user. When the user does not enter the values belonging to the DDIC Domain Value Range of the data element, the cell is rendered with a red border and an ALV error message comes up telling the user to enter the correct values from the F4 help.
In general, this is really great, but in case the user needs to erase the value, this automatical ALV Grid error message keeps popping up asking him to enter at least one value from the value range.
(I assume this is due to the fact that the Domain value range does not contain the value 'empty'.)
 
I would like to keep the functionality of checking the entered value but want to switch off the error message in case nothing was entered. How can I achive this?
 
This is what I did so far: 
1. Upon initializing ALV Grid, I define the field catalog like this: 
ls_fieldcat-fieldname = 'REACTION'. "#EC NOTEXT 
ls_fieldcat-edit = abap_true. 
ls_fieldcat-coltext = 'Reaction'. "#EC NOTEXT 
ls_fieldcat-outputlen = '8'. "#EC NOTEXT 
 
* This forces the user to set at least one value; not allowing him to delete it!! 
ls_fieldcat-ref_table = 'CRMS_ES_FOREIGN_ATTRIBUTE'. "#EC NOTEXT 
ls_fieldcat-ref_field = 'REACTION'. 
ls_fieldcat-key = abap_true. 
 
ls_fieldcat-checktable = '!'. 
ls_fieldcat-f4availabl = 'X'. "shows the handle for F4 help 
ls_fieldcat-col_id = 7.
 
(I would assume here that the ls_fieldcat - structure would allow an additional field which allows empty values, but I could not find one!) 
 
2. For my ALV Grid instance, I am registering the F4 during initialization: 
call method gr_fkt_grid->register_f4_for_fields 
 exporting 
 it_f4 = lt_f4. 
 
 ls_f4-fieldname = 'REACTION'. "EC SYNTCHAR 
 ls_f4-register = abap_true. 
 insert ls_f4 into table lt_f4. 
 call method gr_fkt_grid->register_f4_for_fields 
 exporting 
 it_f4 = lt_f4. 
 
3. Then I am setting the handler while initializing: 
 set handler lr_grid_event_receiver->handle_f4 
 for all instances. 
 
4. I also have checking methods in PAI for the ALV cells, but they do not apply in this case, 
 since ALV itself performs this check described above. I cannot see a chance for 
 interfering myself in PAI. 
 
Does anyone have an idea how I could prevent the ALV Grid of bringing up the message "Enter a valid value" and 
allowing to delete the cell content while keeping its checks in case the user enters a wrong value? 
 
Thank you very much, 
regards, 
Konrad 

Hi Konrad,
Inside the handler method for event DATA_CHANGED, always suppress the error log by calling method activate_display_protocol with dialog = ''.
Whenever u need error log call method display_protocol based on ok_code(sy-ucomm).
Ex:
method data_changed. " Handler method for event 'DATA_CHANGED'
*Suppressing error log
 call method g_o_grid->activate_display_protocol " Always suppress error log when grid is changed
 exporting
 i_dialog = ''.
 if er_data_changed->mt_protocol[] is not initial.
 if ok_code = 'BACK' or ok_code = 'SAVE'. " Based on ok_code display error log
*Display error log
 call method er_data_changed->display_protocol.
 endif.
 endif.
endmethod. "data_changed
Might solve ur problem
Thanks,
Edited by: Sap Fan on Oct 14, 2009 5:35 AM

Where is the Show menu button that is supposed to be at the bottom of the window

where i sthe Show menu button that is supposed to be at the bottom of the iTunes window that will allow me to move music from one computer library to another?

Thank you but I have now solved my problem.
I was trying to move music files from one iTunes library on one computer to the iTunes library on another computer.
The instructions on the Apple site tell you to open sharing on both libraries and then use the Show menu button at the bottom of the window to select 'items not in my library'
What they don't tell you is that the button is on a hidden toolbar that will only appear if both libraries are logged in to the same account with the same ID and passward in Home Sharing which is in the Advanced drop down menu.
I had Home Sharing switched on in my Preferences but was not using identical IDs & passwords.
As the toolbar with the Show menu botton was hidden I could not see it until I worked out that both computers needed an identical log-in. With that done after various trial and error efforts I found the button and was able to move the files.
Thanks for your help.

Where in the 12c grid control that it supports 11r2 database. Thanks

Similar Messages

Maybe you are looking for