Where install MI client and Creme on WM5.0

Hi
Where should be installed MI client and Creme on WM 5.0 for best performance.
There are three option: Device , Application, Cache Disk
Thanks for any advice!
Michal

Hi ptako,
For PDA there are two kinds of memory Cache and Device.
I dont think we can mannually choose the application memory.
and Cache memory is handled by OS.
we have control over Device memory, so install ur MI client & JVM there only.
NB: in settings you can manage the space allocated for application memory, by adjusting the slide in Settings->Memory.
-Rgds
Divya

Similar Messages

Install XE Client and Visual Studio 2003

I have installed the XE Server 10.2.0.1 on a Windows 2003 machine. This was done without any problem.
Then I installed the XE Client 10.2.0.1 on a Windows XP P2 Client.
Connecting to to the server with sql command line is no problem.
I then start a new c# project in VisualStudio 2003, add the reference to the Oracle.DataAccess.dll (version 10.2.0.100, runtime v1.0.3705)
Just on initialize a new OracleConnection, I get the error about the type initializer threw an exeception. The inner exception says, that the provider is incompatible with the Oracle-Client-Version.
If I start the same binary on the server, it works fine.
So it seems, that the client binaries are not the same as on the server.
How can I solve this problem?
Severin

Hi Severin!
If I start the same binary on the server, it works
fine.Is it also VS 2003 present on server or some other VS version e.g. VS 2005?
So it seems, that the client binaries are not the same as on the server.I don't think that can be reason -> so just to check:
Install XE Client 10.2.0.1 on a Windows 2003 machine (not on the machine where is XE Server installed - e.g. in virtual machine or somewhere else) and then try to run binaries there ...
I'm not sure, but I think this issue have something to do with distinction of some Microsoft libraries (on OS or VS level ....).
Cheers!

Issues installing Informatica Client and Server.

Hello all,
I am installing Informatica in a Win Server 2003 with SQL 2005.
I am following the instructions on the manual, when I install the Client, at the end I receive a NON FATAL error that says that it can not open the installation package for VisioCOMAddinSetup.msi
{color:#008000}+La fase de confirmaci¢n finaliz¢ correctamente.+
La instalaci¢n con transacciones ha finalizado.
Error :
ExitCode : 0
Installing VisioCOMAddinSetup.msi
+=================================+
Command Executed
{color}-----
{color:#008000}+"C:\WINDOWS\system32\msiexec.exe" /i "C:\Documents and Settings\oracle\Configuración local\Temp\1\6564.tmp\VisioCOMAddinSetup.msi" /qn TARGETDIR="C:\Informatica\PowerCenter8.1.1\client\MappingTemplate"+
Output of execution
{color}-----
{color:#008000}+Output :+
C:\Documents and Settings\oracle\Configuraci¢n local\Temp\1\I1224023921\Windows>"C:\WINDOWS\system32\msiexec.exe" /i "C:\Documents and Settings\oracle\Configuración local\Temp\1\6564.tmp\VisioCOMAddinSetup.msi" /qn TARGETDIR="C:\Informatica\PowerCenter8.1.1\client\MappingTemplate"
N o s e p u e d e a b r i r e s t e p a q u e t e d e i n s t a l a c i ó n . C o m p r u e b e q u e e l p a q u e t e e x i s t e y q u e p u e d e o b t e n e r a c c e s o a é l ; o b i e n , p ó n g a s e e n c o n t a c t o c o n e l p r o v e e d o r d e l a a p l i c a c i ó n p a r a c o m p r o b a r q u e s e t r a t a d e u n p a q u e t e v á l i d o p a r a W i n d o w s I n s t a l l e r .
{color}
{color:#008000}+Error :+
ExitCode : 1619
Creating Shortcuts
+==================+
Done
Installation Completed
+======================+{color}
{color:#008000}{color:#000000}As it is a non fatal error, I continue witht the clientt SP4 installation and when I try to install the Client, I receive this error message when I test the connection to the PowerCenter repository DB{color}+:+ {color:#000000}The DB is created, the information regarding the connection is correct, the ODBC connection is succesfull when I test it. I have the jdbc driver installed..{color}
{color}
{color:#008000}+*Connection Test Failed. [Informatica][SQL Server JDBC Driver][Informatica][SQL Server JDBC Driver] The requested instance is either invalid or not running.* +{color:#000000}So I can not install it{color}
{color}
{color:#008000}{color:#000000}Does anyone knows what's wrong here? Thank you very much in advance.{color}{color}
{color:#008000}+Soledad+{color}

Can any one please help to find a link for downloading informatica/Powercenter 8.6 Server for windows. I was able to find and download the PowerCenter 8.6 Client only. The link for the PowerCenter Client 8.6 i have used is :
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=9149012
and then i selected the : V16329-01 Part *1* of 2 and V16329-01 Part *2* of 2
I do appreciate ur help
majetto- Sydney

Not able to install HANA client and Studio developer edition on Windows(64 bit)

Hi,
I have recently downloaded SAP HANA client and Studio developer edition package for Windows 64.
ngdbc_rev68
sap_hana_win64_client_rev80
sap_hana_win64_studio_rev80
Bit,but I am not able to install it on my machine.
It is giving me error:
Cannot install
Cannot install Microsoft C/C++ Runtime
    Starting external program C:\Users\spragya\CSC\SAP HANA\Client and Studio\sap_hana_win64_studio_rev80\studio\msdev2010_vcredist_x64.exe
      Command line is: "C:\Users\spragya\CSC\SAP HANA\Client and Studio\sap_hana_win64_studio_rev80\studio\msdev2010_vcredist_x64.exe" /q
      Program terminated with exit code 1603
Can someone please let me know what is this issue and this can be rectified.
Screen image of the error attached for reference.

Hi Pragya,
Did you check : 1) Administrator Access while installing Microsoft C++ Runtime, 2) enough space on your disk, 3) try uninstalling the MS C++ old version 4) Empty Windows Temp folders
Also check if the environment variables are set right on your Windows machine.
Regards
Avinash Raju

Problems installing instant client and ODBC

I am trying to install the instant client and ODBC drivers on an XP machine so I can connect to an OracleXE database via ODBC for an application to use.
I have unzipped the instant client and ODBC drivers to c:\Oracle and added an entry to the PATH statement.
When I attempt to add an ODBC connection I get the error "The Oracle client and network components were not found. The components are supplied by Oracle Corporation and are part of the Oracle version 7.3 or greater client software installation. You will be unable to use this driver until these components have been installed"
Am I missing something in the configuration?
All help appreciated.

did you set your ORACLE_HOME=c:\ORACLE and run the odbc_install.exe?

Install Novell Client and ZFD client question

Currently I am doing an unattended install of the Novell client and then a
login script install of the ZFD client. Is there a way to install the novell
client and then kick off the install of the ZFD client before rebooting? Or
would this cause more trouble then its worth?
Thanks for the help.
Rich

Rhuhman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

SAP mobile client and Creme

Can SAP Mobile Client work with any Java Runtime Environment except Creme ??

Hi,
NO, SAP Mobile Client only is tested and supported to work with NSICOM Creme only.
There is no other java VM supported by SAP for windows mobile.
Regards,
NIpun

Installing Oracle Client in 9.2.0.8

I was trying to install oracle client and in OSS 1017418, it states:
"Confirm that /oracle/client/92x_64/lib is a link to /oracle/<DBSID>/920_64/lib"
Can anyone advise me how to do this in AIX 5.3? I know the command is "ln". Should it be a soft link or hard link? And which is the source? I assume it is /oracle/client/92x_64/lib.
I tried to extract the OCL92064.SAR under /tmp directory and the next thing i realised is it actually overwritten the permission of /oracle directory! ora<sid> & <sid>adm thus lost access to /oracle and unable to start SAP.
I solved this by changing back the permission of the directory and put back the original 92x_64
Anyone know any safer way of doing this task?
Points will be given when helpful answers or solutions are provided.
Thanks in advance.

Hi Eric,
After I did that, I saw "lib -> /oracle/client/92x_64/lib" under /oracle/<sid>/920_64/lib directory, is this correct?
I thought "lib -> /oracle/client/92x_64/lib" would be under /oracle/<sid>/920_64 directory instead?
I am abit confused.

[ChaRM] 2 DEV clients and 2 QA clients

Hi
I have a situation where 2 DEV clients and 2 QA clients exist before release to production.
DEV
100 Workbench
200 Customizing
QA
100 Test 1 (for vendor)
200 Test 2 (for customer)
PRD
100 Production
Transports from DEV 100 and DEV 200 need to be released to QA 100 and 200.
(sometimes to only one of 2 QA clients, which makes it even more complicated)
If I apply SolMan ChaRM to this enviornment, what configuration are recommended?
(SMSY, TMS???)
Thank you

Hi,
PI discards all the MAC table entries that are on trunk ports for a switch. This enhancement was added from PI 2.1 & later.
- Ashok
Please rate the useful post or mark as correct answer as it will help others looking for similar information

Need help installing 9i CLIENT on redhat linux

I'm getting very confused trying to figure this out. I'm completely new to Oracle, but not new to Linux. I've read the installation docs, but everything seems to assume that you are going to be installing the full database. I'm not sure what I need to do if I'm just installing the client.
I'm going to be accessing a remote Oracle database with read-only access from ColdFusion, so all I'll be doing is running queries - no updating or creation of records. Do I need to install the runtime version of the client? Should I run a custom install and just install the OracleNet and SQL*Plus components?
Is there any documentation with step by step instructions for JUST installing the client? I can't tell from the full documentation if I need to do all the pre-install and post-install stuff if all I'm installing is the client.
Any and all help on this would be appreciated. The documentation I can find outside of Oracle's all assume that I've already installed the client, and Oracle's documentation is just confusing me further because it is so fragmented.
Many thanks,
Mary

Hello Mary,
I don't know ColdFusion, but I asume you need at least SQL*Net to connect to the remote db.
So run the installer you have (even if you have only the full db software cd's) and select custom install (or manual product selection), there you should select sqlnet and sqlplus the rest will be selected by the installer (dependecies). If it is not automaticly called you have to configure sqlnet afterwards therefor you can execute netca in the $ORACLE_HOME/bin directory or netmgr, I don't know at the moment which is the best one for you. This tools will create your tnsnames.ora config file for the remote db settings.
Hope this helps a little, Olaf

If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?

If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?

Your users can utilize Outlook no matter where your email is hosted at.
how will it be different for them
different from what?

Installing Lync 2013 and remove 2010 client via SCCM

We have Windows 7 x64 PC’s running Lync 2010 64-Bit client.
What I need to do is install the Lync 2013 32-Bit client and then uninstall the Lync 2010 64-Bit client.
Using the Office Customization Took, I am able to install the Lync 2013 client fine, however the 2010 client isn’t not removed.
Here is what I did:
-Have the standalone Lync 2013 installer.
I then copied the Lync 2010 64-bit install files into a new folder in the Lync 2013 source files.
This folder is c:\Lync2013\Lync2010
-Created MSP file using OCT set to never reboot.
-Under ‘Add installations and run programs’ option, I specified the Lync 2010 to be removed post install of Lync 2013.
The Command line: [post install] [INSTALLLOCATION]\Lync2010\LyncSetup.exe /silent /uninstall
-Loaded this into SCCM and set to run at a logon event.
As stated above, Lync 2010 is not removed.
A few questions:
Is this even possible using the OCT?
In the OCT, is it a problem trying to mix two different installers?
One 32-Bit, the other 64-Bit?
If not, then is the command line correct for the Lync 2010 uninstall?
If no for # 3, how do I make SCCM use the correct path to the package where the Lync 2010 install files are?
In the OCT, do I need to have the Lync 2010 command line as:
\%WINDIR%\SystemWOW64\CCM\Cache\nameofpackage
Please help me alleviate some frustration with any ideas for the above.

You can use the command msiexec.exe /uninstall “C:\Program Files (x86)\OCSetup\Lync.msi” to uninstall Lync 2010.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I'll try this, thanks! For the post uninstall of Lync 2010 using the OCT, should I also ad /quiet switch or /no restart to suppress dialog boxes and not restart the PC when the removal is complete? Or will the OCT prevent it from being restarted
and 'suppress modals' as I set this during the install of Lync 2013.

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

If I were to purchase the Apple Remote Desktop with Unlimited licenses, would I be able to install the client software on each of there computers/laptops and have them remote desktop into the server?

I have several friends and family who are looking for a central place to access information from ( Pictures, home movies etc ). So I am considering setting up an OSX Lion Server. There are some other things I can use it for as well.
Here is my question:
If I were to purchase the Apple Remote Desktop with Unlimited licenses, would I be able to install the client software on each of there computers/laptops and have them remote desktop into the server? Or would I have to install the Admin software on each? Do they intend it to be used strictly as one admin to access many clients?
I always could set up a network drive so they can log in and just see the folders they have created with space on the server I provide them. But I want them to be able to log an and actually use it as a Remote Desktop.
Thanks,
Eric

Dave,
Thanks for the feedback. I understand that ARD is meant for Remote Administration, but I was not sure if it could be used for my purpose as well. The reason I was looking to do it this was was because I read several articles online about security and performance issues with setting up VNC and activating screen sharing. Unless I am misunderstood.
As far as people's activities on the server, mostly it is going to be used as a place for them to store their media. I will only allow own person ( Who I trust and I know wont botch the server ), to run applications. Everyone else will be restricted to uploading and downloading content to their designated account on the server as well as a community share on the server.
I appreciate your help.
Thanks,
Eric

Install j2se plugin version 1.6.0_07 on your client and NPX_PLUGIN_PATH environment variable set before starting Netscape.

Hi experts m new to apps please help.. I have installed successfully Oracle Apps R12 on OEL - 5 All the services runining fine. but when i am opening forms its giving error "install missing plugins" i installed jre-6u7-linux-i586-rpm.bin and Mozilla Firefox 3.0.18 [root@ust ~]# cd firefox/plugins/ [root@ust plugins]# ln -s /usr/java/jre1.6.0_07/plugin/i386/ns7/libjavaplugin_oji.so ./libjavaplugin_oji.so [root@ust plugins]# ls libjavaplugin_oji.so libnullplugin.so [root@ust plugins]# ll total 20 lrwxrwxrwx 1 root root 58 Sep 11 16:22 libjavaplugin_oji.so -> /usr/java/jre1.6.0_07/plugin/i386/ns7/libjavaplugin_oji.so -rwxr-xr-x 1 root root 19160 Sep 15 2007 libnullplugin.so [root@ust plugins]# but when m trying to open forms at that time giving error "install j2se plugin version 1.6.0_07 on your client and NPX_PLUGIN_PATH environment variable set before starting Netscape."

Linux is not a certified client tier for accessing EBS
Unable to access r12 forms in linux client
https://forums.oracle.com/search.jspa?view=content&resultTypes=&dateRange=all&q=linux+client&rankBy=relevance&contentTyp…
HTH
Srini

Where install MI client and Creme on WM5.0

Similar Messages

Maybe you are looking for