Where is a good source to purchase a battery online?

After three and a half years, and 654 power cycles the battery on my Mid 2009 13" MBP is going. It lasts only about 90 minutes. As I have already replaced the RAM and HD myself I am fairly confident I can replace the battery as well. However, in looking for a source to purchase it online I cannot seem to find anyone discounting batteries that seems reliable. Anywhere I find a discounted price it seems the battery pictured is different, reviews are inconsistent, or they are out of stock. And in looking at the OWC website I do not even see the correct battery listed. Any tips on manufacturer of battery, or location to buy would be appreciated. Thanks in advance and Happy Holidays.

Though it may seem like more money, the best option is a genuine Apple battery. The price below includes labor for its replacement.
Apple Price
Region
11-inch, 13-inch and 15-inch
17-inch
MacBook Pro (Retina)
United States
$129 pre taxes
$179 pre taxes
$199 pre taxes
Canada
CA$139 pre taxes
CA$189 pre taxes
CA$209 pre taxes
Europe
€129 inc. VAT
€179 inc. VAT
€199 inc. VAT
Switzerland
CHF 139 inc VAT
CHF 199 inc VAT
CHF 219 inc VAT
United Kingdom
£99 inc. VAT
£139 inc. VAT
£159 inc. VAT
Japan
¥11,800 inc. taxes
¥15,800 inc. taxes
¥17,800 inc. taxes
Australia
A$149 inc GST
A$199 inc GST
A$229 inc GST
China
988 RMB inc. vat
1398 RMB inc. vat
1498 RMB inc. vat
An aftermarket battery may not have been subject to Apple's stringent manufacturing specifications, may not have been stored in an environmentally controlled area, it may have been rejected by Apple, it may be counterfeit, it may fail in a manner that will damage your MBP... there are many reasons there are cheaper alternatives to an Apple battery.
Yours cost 70¢ a week. An third party replacement is likely to cost more.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=Macn otebooks

Similar Messages

Where is a good place to purchase video cameras?

Hello.
I know this is a Final Cut forum and I tried searching for the answer but didn't find much.
I want to purchase a Panny HVX200.
Anyone know where a good online place to buy is? Or anyplace located in Dallas Fort Worth Texas?

Not many are still selling the 200, because the 200a replaced it:
http://www.spec-comm.com/
Always buy Panasonic authorized.
In Dallas, a/t Panasonic there are:
ECI Video
1225 Round Table Drive
Dallas, TX, 75247 (214) 969-6946
Videotex Systems
10255 Miller Road
Dallas, TX, 75238 (972) 231-9200
Accent Audio Video
13616 Neutron Road
Dallas, TX, 75244 (972) 458-0501
TM Television / halbrook & miller
2307 Springlake Road ste# 518
Dallas, TX, 75234 (972) 243-4772
Audio Visual Innovations
13988 Diplomat Drive, Suite 180
Dallas, TX, 75234 (972) 243-4422

Where is a good source for text files?

Hi
I've just finished implementing a huffman tree and been testing it out. It seems to be working fine - encoding and decoding results look correct.
However, I really want to test this tree out with a larger 'dictionary', so that I can construct a larger tree and check if performance is any slower. Does anyone know where I can find a collection of large text documents that I can easily download and have my code run over it?
I tried googling, but haven't came across anything useful. Ideally, I would like to find documents of different topics. e.g. medical, computing, and a more general type that resembles everyday language. The reason I am wanting these is so I can test the encoding of different text on different tree types. Thus, encoding a computer journal on a tree constructed from the frequencies of a medical text file, should yield poorer compression than encoding the same computer journal on a tree constructed from the frequencies of a computing text file.
Thanks

Google "project gutenberg" for a bunch of text.
Plain ASCII isn't enough for pictures and many fields' texts. So a lot of modern texts tend to be PDFs and such, which might not suit your purpose.
Maybe you could also use web pages as test data. Write a program that googles for "medical", downloads the first 100 hits, optionally replaces <.*> with a space, and runs your program on that.

Goods Receipts for Purchase Order using BAPI_GOODSMVT_CREAT

Hi experts,
I am working on the a program where am generating Goods Receipts for Purchase Order. the BAPI_GOODSMVT_CREAT returns an error saying "Material 6003022 not maintained in plant 1001"
Can any one assist? is there a field I may be missing?
Here is a sample code.
DATA: gm_header TYPE bapi2017_gm_head_01.
DATA: gm_code TYPE bapi2017_gm_code.
DATA: gm_headret TYPE bapi2017_gm_head_ret.
DATA: gm_item TYPE TABLE OF bapi2017_gm_item_create WITH HEADER LINE.
DATA: gm_return TYPE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: gm_retmtd TYPE bapi2017_gm_head_ret-mat_doc.
CLEAR: gm_return, gm_retmtd.
REFRESH gm_return.
Setup BAPI header
"data
gm_header-pstng_date = sy-datum.
gm_header-doc_date = sy-datum.
gm_code-gm_code = '02'.
" MB1A * Write 971 movement to table CLEAR GM_ITEM.
MOVE '101' TO gm_item-move_type .
" MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
MOVE '6003022' TO gm_item-material.
MOVE '10' TO gm_item-entry_qnt.
MOVE 'EA' TO gm_item-entry_uom.
MOVE '1001' TO gm_item-plant.
MOVE '' TO gm_item-stge_loc.
MOVE '0901' TO gm_item-move_reas.
" MOVE '4500006877' TO GM_ITEM-WBS_ELEM.
" MOVE '0020' TO GM_ITEM-VAL_WBS_ELEM.
MOVE '0020' TO gm_item-deliv_numb.
MOVE '4500006881' TO gm_item-po_number.
MOVE '0010' TO gm_item-po_item.
APPEND gm_item.
Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
    goodsmvt_header = gm_header
    goodsmvt_code    = gm_code
IMPORTING
    goodsmvt_headret = gm_headret
    materialdocument = gm_retmtd
TABLES
    goodsmvt_item    = gm_item
    return           = gm_return.
IF NOT gm_retmtd IS INITIAL.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ELSE.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ENDIF.

>
Spark842 wrote:
> Hi experts,
> I am working on the a program where am generating Goods Receipts for Purchase Order. the BAPI_GOODSMVT_CREAT returns an error saying "Material 6003022 not maintained in plant 1001"
> Can any one assist? is there a field I may be missing?
>
> Here is a sample code.
>
> DATA: gm_header TYPE bapi2017_gm_head_01.
> DATA: gm_code TYPE bapi2017_gm_code.
> DATA: gm_headret TYPE bapi2017_gm_head_ret.
> DATA: gm_item TYPE TABLE OF bapi2017_gm_item_create WITH HEADER LINE.
> DATA: gm_return TYPE bapiret2 OCCURS 0 WITH HEADER LINE.
> DATA: gm_retmtd TYPE bapi2017_gm_head_ret-mat_doc.
> CLEAR: gm_return, gm_retmtd.
> REFRESH gm_return.
> * Setup BAPI header
> "data
> gm_header-pstng_date = sy-datum.
> gm_header-doc_date = sy-datum.
> gm_code-gm_code = '02'.
>
>
> " MB1A * Write 971 movement to table CLEAR GM_ITEM.
> MOVE '101' TO gm_item-move_type .
> " MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
> MOVE '6003022' TO gm_item-material.
> MOVE '10' TO gm_item-entry_qnt.
> MOVE 'EA' TO gm_item-entry_uom.
> MOVE '1001' TO gm_item-plant.
> MOVE '' TO gm_item-stge_loc.
> MOVE '0901' TO gm_item-move_reas.
> " MOVE '4500006877' TO GM_ITEM-WBS_ELEM.
> " MOVE '0020' TO GM_ITEM-VAL_WBS_ELEM.
> MOVE '0020' TO gm_item-deliv_numb.
> MOVE '4500006881' TO gm_item-po_number.
> MOVE '0010' TO gm_item-po_item.
> APPEND gm_item.
>
> * Call goods movement BAPI
>
> CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
>   EXPORTING
>     goodsmvt_header = gm_header
>     goodsmvt_code    = gm_code
>   IMPORTING
>     goodsmvt_headret = gm_headret
>     materialdocument = gm_retmtd
>   TABLES
>     goodsmvt_item    = gm_item
>     return           = gm_return.
>
> IF NOT gm_retmtd IS INITIAL.
>
>   COMMIT WORK AND WAIT.
>   CALL FUNCTION 'DEQUEUE_ALL'.
> ELSE.
>   COMMIT WORK AND WAIT.
>
>   CALL FUNCTION 'DEQUEUE_ALL'.
> ENDIF.
My guess, is that this material is not really maintained in the Plant '1001', to be on the safer side, get the exact values from EKPO itself, also check if this material exists in the table MARC for the plant and storage location.
MOVE '1001' TO gm_item-plant.   "<< Hard coded
MOVE '' TO gm_item-stge_loc.
Replace the above hardcodes to something like this to get the actual value from EKPO.
select werks lgort into (gm_item-plant, gm_item-stge_loc) from ekpo
   where ebeln = gm_item-po_number
        and ebelp = gm_item-po_item.

Where is there good, straightforward installation and configuration docs?

I have installed BI server on a linux box, and the client on a Windows box. we aren't using the default rpd, but rather the OBIA7960, Business Intelligence Applications. I created an 11gR2 database for the obia7960 schema, put the new rpd in OracleBI/server/repository, created the directory under OracleBIData/web. However, there are configuration problems: What nees to be configured on the client box? ODBC? How should the odbc.ini file be configured on the server, if at all? What about the instanceconfig.xml? variously, I'm getting log in errors trying to get into xmlpublisher: oracle.apps.xdo.security.ValidateException. Where is a good source to find examples of what these files should look like?

Thanks for the reply. I have used the 'official' documentation of course, but that is part of the problem. Anyway, yesterday I went through the installation from the beginning. Everything works up to validation the installation, i.e. the bi server check and the client check with nqcmd. However, the steps that need to be done and what configuration needs to be done in odbc.ini, instanceconfig.xml for web, presentation, and scheduler, etc. are unclear once a different rpd is used. Also, on the client side, a Windows box, how much is ODBC used or is it TCP through the Oracle client tools? The environment is this:
Linux Server with BI Server processes and 11gR2 database with BI Applications schema. The rpd is the OBIA OracleBIAnalyticsApps796.rpd. Where does this name have to be set in the configuration of the files on server side and client side?
The client is an appropriate Windows box with the Administrator and other client tools.
The confusion arises in the connection between data sources....the database schema or the rpd? Where and how do those need to be set?
Hope this clarifies my issues a bit more. Thanks

Restrict Posting of Goods Receipt by Purchase Order Type

Does anyone know of a way to prevent posting goods receipt for a specific purchasing document type? We need to prevent users from posting PO's that were system generated through an outside interface. They are brought back into ECC as the system of record. Since authorizations are only based on movement type, plant, and storage location with MIGO, without creating a new movement type, is there any way to achieve this?
Thank you in advance for your help!

Hi,
Normally it would be the other way around, where the continued process for Open Purchase Orders will be done in SAP ERP, and no longer continued in the legacy system.
So in your case, to avoid performing double posting (e.g. goods receipt in legacy and in SAP which causes duplicate inventory in books compared to physical) you would need to stop the Open POs in SAP ERP from being processed further.
Just to be sure, there are a few types of Open POs
1) Open PO where Goods Receipt have not been done.
For this type, normally we would be doing the future receipts in SAP ERP
2) Open PO where Goods Receipt done, but pending Invoice
For this type, we could ignore the PO all together and create a FI Invoice when the invoice comes. (The quantity is entered in SAP ERP via 561 initial stock balance movement type)
For type 1, if you perform goods receipt in legacy system, how are the quantities being captured in SAP ERP? How about payment, will this be done in legacy as well? How do you plan to reflect it in SAP?
For type 2, will you be performing invoice receipt and payment in legacy? How will it be reflected in SAP without being a duplicate with the legacy payment?
If you could answer these questions, then you could lock the SAP PO numbers by highlighting each line item, and click on the lock button. This will prevent future receipts in SAP.

SAP how to determine the account in Goods receipt for purchase order?

We know when we make a Goods receipt for purchase order,we will use the account in GBB and BSX define in OBYC. But where can we find the rule? I mean why system can find the account in GBB and BSX , not the other TEcode?

HI
This is again based on the movement type which SAP has created a link internally.
So if you see when a document is posted it basically derives the GL accounts based on the Movement type,Valuation class,valaution area and so on.
Good luck
Hari

Goods Recipt without Purchase Order

Hi Experts,
Can any one Explain me the Process of Goods recipt without Purchase order.
1) What document type i need to select ?
2) Does i need to process MIRO for these ?
3) If it is a Usual material which i previously procuring throgh purchase order, How it reflect in Stock ?
4) Where can i find the difference of the Material which has purchased through Purchase Order and without Purchase Order ?
5) Does it affect usual stock ?
6) How to follow Vendor Returns for this ?
Plz Plz Give ur Valuable inputs on this.
Best Regards
Javeed

1) What document type i need to select ?
You don't need a document type, just use Tcode MIGO, then select mouvement Type 501
2) Does i need to process MIRO for these ?
No, there is no FI document.
3) If it is a Usual material which i previously procuring throgh purchase order, How it reflect in Stock ?
If your material valuation is "V" : overage price. your stock will be devaluated: Total value of stock will be inchanged, whereas the qty will increase, So the material net price will decrease
4) Where can i find the difference of the Material which has purchased through Purchase Order and without Purchase Order ?
You can lanayse goods mouvement through Tcode MB51, Also you can Tcode MR51 for analyzing.
5) Does it affect usual stock ?
Yes, if you don't use Split valuation, your stock will be homogeneous. So if you wish to keep separately the free goods you have to use split valuation
6) How to follow Vendor Returns for this ?
Use MIGO, mouvement Type 502

Good source's for learning hyperion reporting ??

Hello gurus,
I m an Oracle PL/SQL developer. I have decent knowledge on oracle PL/SQL. i m planning to learn hyperion reporting, so do you guys have any good source of links. Or it will be great if you could point me in a direction to a good place for start learning hyperion reporting ?
Any links will be great too!!
Thank you so much!!!

I m looking for interactive reporting!!!
FYI - We are using Oracle Hyperion 9.3. And we have Hyperion interactive reporting studio and workspace as well.
I m an Oracle PL/SQL developer. I m total new to this reporting tool. But i didnt find really good source wher can learn quickly and start creating reports. For some reason i wasn't really impressed with Oracle Hyperion documnetation as i compare to oracle database or PL/SQL documentations. Its not just my tought, lot of folks out there think sameway. I dont if that's true
Any links with examples of developing the reports or any good documentation with examples will be great!!
I appriciate it.
Thank you!!

Where can I access a previous purchase Specifically OS 10.7

Where can I access my previous purchase of OS 10.7 for download?

I'm sure you are correct, but in my case I accidentally downloaded Mountain Lion instead of Lion. Mountain Lion is not compatible with my old Macbook so it took a call and a good bit of work to get the purchase cancelled. My purchase never showed up because of the incompatible computer even though I purchased the software.

Where is a good resource to see macs assembled?

Hi, I went in and cleaned the inside of my mac which was filthy. When I was putting it back I could not figure out where this one plastic piece went to. I thought it was supposed to go onto the vent into the processor box, but I could not figure out how it attached. Anyone know of a good source to see where pieces fit? Preferably with decent photos of it being done.
Tnkas

Hi, and a Warm Welcome to the Power Mac G5 Forum!
This may be of assistance
http://akserver.dyndns.org/macosx/hw/asm/PowerMac/PowerMac-G3-G4-G5/PowerMac-G5/ powermac_g5.pdf
or maybe this
http://www.sharpeningbeneath.com/g5guide/
If you can't see it there - perhaps if you describe the piece somone will know what it is. Good Luck.

SAP Adapter: Error when committing SAP good receipt on purchase order.

Hi guys:
I’m trying to perform a sap good receipt on purchase order, and the BAPIs are the followings:
1) BAPI_GOODSMVT_CREATE
2) BAPI_TRANSACTION_COMMIT
Note: This is only a proof of concept. Therefore, only I'm considering the commit of transaction.
I’ve followed the example SAPTransaction, but in the moment when the BizTalk is sending the commit (point 2), BT get this error:
There was a failure executing the send pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLTransmit, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35" Source: "XML assembler" Send Port: "SP_BAPI" URI: "sap://CLIENT=800;LANG=EN;@a/192.168.0.102/00" Reason: This Assembler cannot retrieve a document specification using this type: "http://Microsoft.LobServices.Sap/2007/03/Rfc/#BAPI_TRANSACTION_COMMIT".
The operations:
<BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Operation Name="Bapi" Action="http://Microsoft.LobServices.Sap/2007/03/Bapi/MKPF/CREATEFROMDATA/BAPI_GOODSMVT_CREATE"
/>
<Operation Name="Commit" Action="http://Microsoft.LobServices.Sap/2007/03/Rfc/BAPI_TRANSACTION_COMMIT"
/>
</BtsActionMapping>
Thanks in advance.
Luis

Hi Luis,
Refer to links, they might be useful:
This Assembler cannot retrieve a document specification
This Assembler cannot retrieve a document specification
using this type: "http://www.sap.com/abapxml#abap
Rachit
Please mark as answer or vote as helpful if my reply does

Good Source for SATA HDD enclosures?

I am looking for a good source for hard drive enclosures for my MB Pro hard drive. I have upgraded mine, and I want to have access to my old one?

I've never bought one myself, but I have heard Other World Computing recommended. You probably would want to look at a firewire SATA with the Oxford 11+ chipset (I'm not sure of the chipset number--it could be higher). With the firewire enclosure, I think you can also make a bootable clone for your Mac. Hopefully you will get recommendations of what to buy as well as where to buy. But OWC is a good place to start.
Good luck!

Automatic creation of transfer orders from goods receipt of purchase order.

Hi experts
The project i am currently working on requires the following;
When goods receipting a purchase order i have a requirement for the system to create automatic transfer orders to put the stock away into storage bins. I am aware that the stock goes straight into the 902 area once goods receipted. Is it possible to have the transfer orders created automatically out of 902 once the goods receipt has been posted.
In support of this, i have made an entry in transaction OMKX for the following;
Reference Movement Type - 101
Movement Indicator - B (goods movement for purchase order)
Movement Type - 101
TR Create Transfer requirement - X
Immed. TO Creation - A
Addl Data - X
Once i receipt the PO it just sits in 902 and does not create any automatic transfer orders.
Could someone please help me
Thanks
Simon

Please try to process the material document of the GR manually by LT06 in foreground to find out the root cause of the error.
You may also want to setup the mail control (V_T321-MAILK) for immediate TO creation in OMKX. The system will send you a express message (depending on your setup) if TO creation is failed.

MIGO - Goods Receipt against Purchase order. PO rate dispaly.

Is it possible to display purchase order line item rate in MIGO - Goods Receipt against purchase order - Quantity tab.
In Quantity tab - System is showing Qty in Unit of Entry, Qty in SKU, Qty in Delivery Note, Quantity Ordered, alongwith these fields we also want display of Purchase order rate/each of that line item.
Please guide.

BTW you are getting PO number at MIGO and clicking over that you will get entire PO then why you want PO rate display here??

Where is a good source to purchase a battery online?

Similar Messages

Maybe you are looking for