Where is a "Real" example with "real" source?

Hi!
The demo MIB'S for the SDK are fine and it's possible to generate code. But the results are empty functions without code which make sense. It's really not a good demo for a person which is not very good in programming. And I am this person! Who can give me "non empty" code. I need to know how and where I have to call Traps. Are there good examples anywhere?
I need an example for
"1. How do I send a Trap?(SSASendTrap? I get a core dumped while running, which parameters ? etc...)
2. How do I trigger the Trap? Which function or loop?
Br,
cAner

No one?

Similar Messages

Where I can find examples with OLAP DML to update the cube cells?

Hi,
Where I can find examples with OLAP DML to update/calculate the cube measure/cells?
I would like to insert data into the cube by OLAP DML.
Regards,
TomB

Not sure about examples but this is how you should proceed
1. Limit all your dimension to the leaf level values.
lmt financialperiod to '200901'
lmt geography to 'XYZ'
lmt product to 'LAPTOP'
2. Limit your measure variable to one measure(this is applicable if you have more than one stored measure in the cube).
for 10g
lmt <cube name>prtmeasdim to '<MEASURE NAME>'
for 11g
lmt <cube name>measuredim to '<MEASURE NAME>'
3. Write into the variable.
for 10g
<cube name>prttopvar = 100 -- this variable is created for a compressed & partitioned cube. for uncompressed cube the variable name is <cube name>_stored.
Thanks
Brijesh

Cisco ASA, skipping real source port number with PAT.

Hi Experts,
Cisco ASA configuration guide says:
"PAT translates multiple real addresses to a single mapped IP address by translating the real address and source port to the mapped address and a unique port. If available, the real source port number is used for the mapped port. "
Is it possible to skip this ? I do not want to use real source port number. The issue is, when I have a PAT entry with real source port (port 5060), - SIP session doesn't work. With all the other ports numbers,- everything works.

Hi,
Notice that the configuration you try does not modify the real source port at all.
Since you are using the same "object" for the real/mapped service then the configuration above matches traffic where the connections destination is "any" and the destination is "udp 6000 65535" and only when the source is "udp sip" and in that event it keeps the exact same "udp sip" source port as you are using the same "object".
I am not sure if its a software or configuration related issue but I have not gotten this to work reliably on my ASA. I might have to try some other software level.
I guess you would want to match the SIP source port in the Dynamic PAT and avoid using the SIP port as the mapped port?. With that in mind I was thinking something like this
object service UDP-SIP
service udp source eq sip
object service UDP-SIP-MAPPED
service udp source range 30000 31000
nat (VoiP,outside) source dynamic <source network object> interface service UDP-SIP UDP-SIP-MAPPED
Though it seems the above configuration seems to be bypassed by the ASA completely and it seems to use the identical source port as the mapped port even though it matches the configuration.
If I were to change the above configuration from "dynamic" to "static" then the configuration matches but it uses only the first mapped "source" port of "30000". I guess it would only use a different mapped port if you used multiple real source ports also instead of the current single source port "sip".
nat (VoiP,outside) source static <source network object> interface service UDP-SIP UDP-SIP-MAPPED unidirectional
Example from my own ASA.
DYNAMIC
- Matches the configuration but doesnt map the port at all
Phase: 5
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source dynamic LAN-NETWORK interface service SIP SIP-MAPPED
Additional Information:
Dynamic translate 10.0.0.123/5060 to <my pat ip>/5060
STATIC
- Matches the configuration and maps the source port but only uses the first mapped port from the range
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source static LAN-NETWORK interface service SIP SIP-MAPPED unidirectional
Additional Information:
Static translate 10.0.0.123/5060 to <my pat ip>/30000
I am not really sure if this configuration is reliable at all but its the only thing I can think of at the moment.
Hope this helps :)
- Jouni

Where we get real time XML publisher with neat explanation

hi every one
where we get real time XML publisher with neat explanation for oracle apps

Why XML Publisher Reports Why NOT Traditional Oracle Reports?
Oracle Applications, SQL, PL/SQL: Why XML Publisher Reports Why NOT Traditional Oracle Reports?
Developing XML Publisher Report - using Data Source as PL/SQL Stored Procedure
Oracle Applications, SQL, PL/SQL: Developing XML Publisher Report - using Data Source as PL/SQL Stored Procedure
Developing XML Publisher Report - Using Data Template as Data Source
Oracle Applications, SQL, PL/SQL: Developing XML Publisher Report - Using Data Template as Data Source
Regards,
Srini

Where to Plug real Instruments? in iPad

Where to Plug real Instruments? in iPad

reinhardfromsinsheim wrote:
Where to Plug real Instruments? in iPad
you need an audio interface like this one

Where does Lightroom put HDR in the grid view? Is there anyway to have Lightroom stack the HDR file with the source files?

I can't decipher where (and why) the program is putting the HDR image in the grid. I stack all of my HDR source images so they are easy to track and manage. Other apps/plugins allow you to stack resulting images with their source image. That would be great if there's a way to set that in LR preferences.

Thanks, but this doesn't really answer the question about stacking the HDR file with the source files. Yes, it does put the file in the same folder, however many of my folders have 100s of images (that often look similar) and as far as I can tell, LR places them randomly in the sort order. It doesn't appear to put them at the beginning or end of the sort (usually by date), but somewhere randomly in the middle. Even if it could be made clear what method it is using to sort them, that would help locate one file among hundreds.
Ideally, however it should allow you to stack with the stacked source files. Is there anyway to do this? If not, is it a feature that could be requested?

"Account expired Renew subscription now to resume service." on my Mac with no source of ID. What is it and where does it originate?

I keep getting this on my Mac with no source of ID. It keeps reappearing with no options other than "Renew Subscription". What is it and where does it originate?

You have an account that has expired, but only you know what accounts you have.
Check them.

Received response from host (router IP address) with invalid source port 32784

I replaced my old wireless router with a Cisco Linksys E4200, running firmware version 1.0.02 build 13 May 24, 2011. About once a minute the router sends an unsolicited DNS message to the IPV4 multicast address 01:00:5e:00:00:fb with a destination IP address of 224.0.0.251. The unsolicited message is a DNS response with source port 32784, transaction ID 0, flags 0x8400 (standard query response, no error), questions 0, answer RRs 2, authority RRs 0 and additional RRs 1. The two answers both relate to the router itself: one has Name Cisco18738.local, type A (host address), class 1 (IN), cache flush true, time to live 1 minute, data length 4, and the address of the router. The other is the reverse of the same address. The additional record is for Cisco18738.local, type NSEC, class IN, cache flush true, time to live 1 minute, data length 5, next domain name Cisco18738.local, RR type A (host address).
When my desktop computer receives these messages it logs an error, for example: "Jun 23 07:39:22 sauterws02 avahi-daemon[1067]: Received response from host 10.146.9.1 with invalid source port 32784 on interface 'eth0.0'" The 10.146.9.1 is the router's IP address. I also see these messages on the wireless link from my laptop.
I suppose the E4200 is generating these DNS messages in a misguided attempt to make sure there is no old information about its name. Is there a way to turn them off? If not, is there a way to report this to Cisco as a bug?
Solved!
Go to Solution.

gv wrote:
1. To contact Linksys, call support.
2. From the internet draft: "Multicast DNS implementations MUST
silently ignore any Multicast DNS Responses they receive where the
source UDP port is not 5353." Your avahi-daemon does not comply with this draft.
Thank you for the reference. For the sake of others who may read this thread, the current draft of multicast DNS is at http://www.ietf.org/id/draft-cheshire-dnsext-multicastdns-14.txt.
Here is the whole paragraph from which you quoted, from section 6 (Responding): "The source UDP port in all Multicast DNS Responses MUST be 5353 (the well-known port assigned to mDNS). Multicast DNS implementations MUST silently ignore any Multicast DNS Responses they receive where the source UDP port is not 5353."
Thus, it appears that there are two errors here: the Cisco E4200 is not using 5353 as the source port, and the logger is not silently ignoring it.
The message appears to be an announcement rather than an actual response to a query. In section 8.3 (Announcing) I found this paragraph: "A Multicast DNS Responder MUST NOT send announcements in the absence of information that its network connectivity may have changed in some relevant way. In particular, a Multicast DNS Responder MUST NOT send regular periodic announcements as a matter of course." Thus, it appears that there are three errors here.

Where can I find example LabVIEW VIs for the NI-USRP?

There are several sources of example LabVIEW VIs for the NI USRP:
We have established a NI Community "NI USRP Example LabVIEW VIs" where you can find example VIs from us (NI) and the community.
The NI-USRP driver installs a variety of example VIs to the to the following folder on your PC:
<LabVIEW Installation path>\examples\instr\niUSRP
where you should replace <LabVIEW Installation path> with the root folder of your local LabVIEW installation. For instance, my Windows 7 32-bit PC here has LabVIEW 2011 installed and the examples can be found here: C:\Program Files\National Instruments\LabVIEW 2011\examples\instr\niUSRP
I've installed the NI-USRP driver, but I can't seem to find the new examples in the LabVIEW Example Finder. Where are the example LabVIEW VIs installed by the NI-USRP driver?
Although the NI-USRP driver does indeed install examples, the current NI-USRP 1.1 release does not update the LabVIEW Example Finder with entries for these examples. To find the examples, you can navigate the Windows Start Menu to the following location:
Start Menu\Programs\National Instruments\NI-USRP\Examples
This Start Menu entry includes several Shortcuts that point to folders that are the home to example VIs.
Sam Shearman

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

[svn:fx-trunk] 5899: Re: Sparkified this example with latest namespaces and prefixes.

Revision: 5899
Author: [email protected]
Date: 2009-04-02 17:36:40 -0700 (Thu, 02 Apr 2009)
Log Message:
Re:Sparkified this example with latest namespaces and prefixes.
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/asdoc/en_US/mx/components/examples/ListExample.m xml

I am not sure what's happening with IE9 (no live site) but I had real problems viewing your code in Live View - until I removed the HTML comment marked below. Basically your site was viewable in Design View but as soon a I hit Live view, it disappeared - much like IE9. See if removing the comment solves your issue.
<style type="text/css">
<!-- /*Remove this */
body {
    margin: 0;
    padding: 0;
    color: #000;
    background:url(Images/websitebackgroundhomee.jpg) repeat scroll 0 0;
    font-family: David;
    font-size: 15px;
    height:100%;

Where can I get an additional power source for my MacBook Pro?

I am travelling to Europe next week and will be travelling on the road quite often. I would like to get some work done during that time. My laptop battery will inevitably run out of power during that time and I would like to carry an additional power source with me so I can get some extra juice when I am nowhere near an outlet.
I have the latest MacBook Pro where the battery is not removable.
Where can I get an additional power source for my MacBook Pro? I don't mind if it is a 3rd party product.

you could get something like this: http://www.amazon.com/Energizer-XP18000-Universal-External-Netbooks/dp/B002K8M9H C
it's about the same cost as an extra battery used to be. there's a range of similiar products at Amazon, i'd check reviews.

Problem with setting Source Level in Sun Studio 2

I've got problem with setting Source Level to 1.5 in Sun Studio 2. When I try to set it to 1.5 in Project properties and click Ok everything seem to go well, but when I open Project Properties again Source Level is set to 1.4. I need this to work cause I started to lear Java recently and I want to use foreach loop.
Please help

I'm just citing an example using Date().
In fact, whether I use DateFormat or Calendar, it shows the same result.
When I set the date to 1 Jan 1950 0 hours 0 minutes 0 seconds,
jdk1.4.2 will always return me 1 Jan 1950 0 hours 10 minutes 0 seconds.
It works correctly under jdk1.3.1

Howto deal with multiple source files having the same filename...?

Ahoi again.
I'm currently trying to make a package for the recent version of subversive for Eclipse Ganymede and I'm almost finished.
Some time ago the svn.connector components have been split from the official subversive distribution and have to be packed/packaged extra. And here is where my problem arises.
The svn.connector consists (among other things) of two files which are named the same:
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/features/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/plugins/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
At the moment makepkg downloads the first one, looks at its cache, and thinks that it already has the second file, too, because it has the same name. As a result, I can neither fetch both files nor use both of them in the build()-function...
Are there currently any mechanisms in makepkg to deal with multiple source files having the same name?
The only solution I see at the moment would be to only include the first file in the source array, install it in the build()-function and then manually download the second one via wget and install it after that (AKA Quick & Dirty).
But of course I would prefer a nicer solution to this problem if possible. ^^
TIA!
G_Syme

Allan wrote:I think you should file a bug report asking for a way to deal with this (but I'm not sure how to fix this at the moment...)
OK, I've filed a bug report and have also included a suggestion how to solve this problem.

Dynamic columns with Excel Source?

I have Excel file number 1 with columns A ja B.
I have database table with columns A,B,C,D,E,F,G,H etc. (there are 100 columns)
I know how to import normally data with Excel Source and OLE DB Destination with Excel file 1.
Now I have new need.
I should be able to import dynamically Excel files with any combination of columns.
It should be automatic import with For Each Container.
When new files like below is imported, I should not be make any changes to SSIS.
Excel 2) Columns A, G, X (so column A data must be added to column A in database etc)
Excel 3) Columns B, C, G, Y (so column B data must be added to column B in database etc)
Excel 4) Columns D, X
IS THIS POSSIBLE WITH SSIS? HOW?
CUSTOM CODE IS NEEDED? ANY POINTERS TO SOLUTION?
Kenny_I

How you are going to deal with the rows here?
For example,
Excel 2) Columns A, G, X (so column A data must be added to column A in database etc)
when Excel 3 files are processing are you going to update the record that you added in Excel
2.
Excel 3) Columns B, C, G, Y (so column B data must be added to column B in database etc)
Excel 4) Columns D, X
when Excel 4 files are processing what is your scenario for column X which you just added in
Excel 2. Are you going to update it or add new rows here.
As Arthur has suggested generating your package in code seems the way to go for but before that you need
to think about all the scenarios.
Vikash Kumar Singh || www.singhvikash.in

Enterprise Portal integration with E-Sourcing Portal

Hi,
Has anyone done Enterprise Portal integration with E-Sourcing Portal.How can we use the E-Sourcing portal url in Enterprise Portal?
Thanks,
Rajani

Hello Rajani,
For Connecting web based Application we have to use AppIntergator Application.
Please go thorugh the blog and implement the same thing its many connect to your java portal.
blog is Integrating your Web Front-ends into the SAP Enterprise Portal using the Application Integrator
Please go through the below blog where its define how to pass user and password it the url iview.
SP12/SP20: Setting URL Dynamically in URL iView
Thanks
Chittya Bej
Edited by: Chittya Bej on Apr 5, 2010 11:31 AM
Edited by: Chittya Bej on Apr 5, 2010 11:33 AM

Error running A Simple MDB example with oc4j

Hi All,
I am new to OC4J, I am trying the example for MDB from OTN's site, A Simple MDB example with OC4J. When I start my OC4J on the command line > java -jar oc4j.jar
I get the following exception:
Error deploying file:/C:/unzipped/mdb_hello_world/build/mdb/mdb.jar homes: No lo
cation set for Topic resource MessageDrivenBean MDB
Error in application mdb: Error loading package at file:/C:/unzipped/mdb_hello_w
orld/build/mdb/mdb.jar, Error deploying file:/C:/unzipped/mdb_hello_world/build/
mdb/mdb.jar homes: No location set for Topic resource MessageDrivenBean MDB
04/07/09 15:21:40 Error instantiating application 'mdb' at file:/C:/unzipped/mdb
helloworld/build/mdb.ear: Error initializing ejb-module; Exception Error in ap
plication mdb: Error loading package at file:/C:/unzipped/mdb_hello_world/build/
mdb/mdb.jar, Error deploying file:/C:/unzipped/mdb_hello_world/build/mdb/mdb.jar
homes: No location set for Topic resource MessageDrivenBean MDB
04/07/09 15:21:41 Error starting HTTP-Server: Address already in use: JVM_Bind
04/07/09 15:21:41 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)
initialized
I have just followed all the steps provided to run the example exactly as given.
I did add my Topic and TopicConnectionFatory entries in my jms.xml -
<topic name="The Topic" location="jms/theTopic">
<description>A MDB topic</description>
</topic>
<topic-connection-factory location="jms/theTopicConnectionFactory" />
Here is the ejb-jar.xml given in the example:
<?xml version="1.0"?>
<!DOCTYPE ejb-jar>
<ejb-jar>
<enterprise-beans>
<message-driven>
<description>My message driven bean</description>
<ejb-name>MDB</ejb-name>
<ejb-class>MDB</ejb-class>
<transaction-type>Container</transaction-type>
<message-driven-destination>
<destination-type>javax.jms.Topic</destination-type>
<subscription-durability>NonDurable</subscription-durability>
</message-driven-destination>
<resource-ref>
<description>The log topic where log events are broadcasted...</description>
<res-ref-name>jms/theTopic</res-ref-name>
<res-type>javax.jms.Topic</res-type>
<res-auth>Container</res-auth>
</resource-ref>
<resource-ref>
<description>The Factory used to produce connections to the log topic...</description>
<res-ref-name>jms/theTopicConnectionFactory</res-ref-name>
<res-type>javax.jms.TopicConnectionFactory</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</message-driven>
</enterprise-beans>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>MDB</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Supports</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
Here is my orion-ejb-jar.xml:
<?xml version="1.0"?>
<!DOCTYPE orion-ejb-jar PUBLIC "-//Evermind//DTD Enterprise JavaBeans 1.1 runtime//EN" "http://xmlns.oracle.com/ias/dtds/orion-ejb-jar.dtd">
<orion-ejb-jar deployment-version="1.0.2.2" deployment-time="e7f5a3f42d">
<enterprise-beans>
<message-driven-deployment name="MDB" destination-location="jms/theTopic" connection-factory-location="jms/theTopicConnectionFactory">
<resource-ref-mapping name="jms/theTopic" />
<resource-ref-mapping name="jms/theTopicConnectionFactory" />
</message-driven-deployment>
</enterprise-beans>
<assembly-descriptor>
<default-method-access>
<security-role-mapping name="<default-ejb-caller-role>" impliesAll="true" />
</default-method-access>
</assembly-descriptor>
</orion-ejb-jar>
I don't know what is wrong. Please help me.
Rohini

Hello,
I guess that you didn't define the Topic and/or TopicConnectionFactory on your OC4J
Inside $J2EE_HOME/config (see: subfolders .../j2ee/home/config e.g.)folder are several xml files appropriate for OC4J configuration. There's also jms.xml. Please, verify this one, it should have some entries for your settings.
Just like in an example below:
<topic-connection-factory name="TopicConnectionFactory" location="jms/TopicConnectionFactory"/>
<topic name="theTopic" location="jms/theTopic"/>
The names should be the same like in your MDB deployment descriptors. It works of course after next OC4J server restart.
I hope helped you
Krzysztof

Where is a "Real" example with "real" source?

Similar Messages

Maybe you are looking for