Where is airport admin utility for lion

There does not seem to be an airport admin utility for airport extreme, I only have the airport utililty that doesn't seem to allow any setup changes.  It also  does not give options for set up changes  when there is no green light for the base station.

Hi - to get the full featured Airport Utility 5.6 for Lion, go to the following link for the download - you can keep 6.1 and 5.6 on your computer.
http://support.apple.com/kb/DL1482
Use it to configure the Extreme when you have problems.
Charlie

Similar Messages

  • How can I get AirPort Admin Utility for Graphite and Snow 4.2.5 to work with OS10.6?

    I've upgraded to the latest version of Mac OS and now AirPort Admin Utility for Graphite and Snow 4.2.5 won't run. Any suggestions on how to either run this utility or otherwise get access to my old Snow Dual Airport via another method? Airport Utility doesn't see the device, despite repeated scans. My computer and iPad connect no problem to the device, but both iPod and iPhone won't take and hold an IP address. (If any one can help me solve this issue, I can live without access the Airport.)
    Thanks,

    I've upgraded to the latest version of Mac OS and now AirPort Admin Utility for Graphite and Snow 4.2.5 won't run. Any suggestions on how to either run this utility or otherwise get access to my old Snow Dual Airport via another method?
    Unfortunately, you will need another Mac running a much earlier version of OS X to be able to install AirPort Admin Utility and make any settings chances to the router.
    Since the normal life of a wireless router is around 5-6 years of use, now might be the time to consider a new router that will provide far better performance than the older Graphite/Snow AirPort.

  • Need AirPort Admin Utility for Graphite and Snow

    hey there.....any help would be greatly appreciated.....
    I ave passed along my graphite base station to my brother in law for his new iMac and it seems he needs the "AirPort Admin Utility for Graphite and Snow" to get it set up. The new "Airport Utility" doesn't seem to recognize it. Is the utility still available for download? I can't seem to find it anywhere?
    Another option....is it possible to copy and paste the utility into my iDisk and have him download it from there?? Not sure it that will work??
    Again...many thanks for any help anyone can offer!!!!!

    AirPort Admin Utility, version 4.2, which works with Graphite and Snow base stations, can be found within the download of AirPort 4.2 (http://www.apple.com/support/downloads/airport42formacosx1033.html).
    I tried it on my MacBook running Mac OS X 10.4.10, with a Graphite base station, and it works fine, so far as I can tell.
    I did not actually try to install AirPort 4.2 using the installer, because I was afraid of messing with my system when all I wanted was the utility. Here is how to get it:
    - Download the disk image AirPortSW42.dmg from the Web page mentioned above. If the installer launches, quit the installer.
    - Double-click the disk image to mount a volume named "AirPort 4.2 Update."
    - Within the AirPort 4.2 Update window, ctrl-click on "AirPortSW.pkg."
    - Select "Show Package Contents."
    - Open the "Contents" folder.
    - Double-click the "Archive.pax.gz" file, which causes an "Archive.pax" file and an "Archive" folder to be extracted to the desktop.
    - Open the "Archive" folder, the "Applications" folder within it, and the "Utilities" folder within that.
    - The AirPort Admin Utility is there. You can move it to Applications/Utilities and discard everything else that was downloaded.
    Thanks to Tesserax (http://discussions.apple.com/thread.jspa?messageID=5136389&#5136389) for recently explaining how to extract an AirPort utility from a download package.
    Although I have never seen "AirPort Admin Utility for Graphite and Snow," it probably was the same thing as AirPort Admin Utility, just renamed.

  • Airport admin utility for Windows anyone???

    I lost my cd that came with the Airport, and I really need to get the airport admin utility again. If anyone would like to put this on putfile.com or some other site like that, I would really appreciate it.

    AirPort 4.2 for Windows

  • Airport Admin Utility for Windows 2000

    Hi all. I'm running win2000 on a thinkpad, trying to hookup to our airport. My son's laptop and g4 (apple) work fine. I need an Airport Administration utility compatible with win2000 and the GRAPHITE Airport. The Airport Admin Utility 3.2 is NOT compatible with the Graphite colored (original?) model airport

    jasonKram, Welcome to the discussion area!
    You don't need any AirPort software on your thinkpad to connect to the wireless network provided by the graphite AirPort base station (ABS). You would connect to it just like you would connect to any other 802.11b wireless network.
    Be aware that the graphite ABS only supports 64 (aka 40) bit WEP. If this graphite is using WEP, you need to ask your son to use AirPort Admin Utility to find the "equivalent network password". That is what you would enter for the password from Windows 2000.

  • Airport Admin Utility for Windows oddity

    I have 29 Airport Express Units installed on my campus, configured with no problems using Mac OS. On my other computer, a Dell, I recentily reinstalled everything from scratch (a necessary evil!). I installed the latest "unsupported" version of the Apple Admin Utility for Windows, v3.2.
    When I start the utility, I get the Base Station Chooser window, and it shows all 29 stations listed. The second column, however, showing the IP addresses of all the stations, lists 254.128.0.0 as the IP address for ALL 29 stations. The right hand panel shows the correct Name, Description, and MAC addresses of each unit as it is selected in the list, but shows the same incorrect IP address.
    If I pick a until to configure, it asks for a password, which I enter, and then fails with a message Error Code: -4. "An error occurred while trying to access the base station. Make sure your network connection is valid and try again."
    The units are working fine, and the administration of the units from any of our Macs is also fine.
    Has anyone seen this? Any ideas on a fix?
      Windows XP Pro  

    Use version 4.2
    http://www.apple.com/support/downloads/airport42forwindows.html

  • Which Airport Admin utility for White Base Station

    I would like to know which version I need for a Windows XP machine and where I can get this version.
    I've spent the last hour online trying to find out and am losing the will to live....
    I have an old white base station simply called Airport Base Station (there are 4 sockets on the back of it 1. Phone line 2. WAN ethernet 3. LAN ethernet 4. power supply)
    I want to configure it using my Windows machine as my old MAC has died.
    Hope someone can help.
    Thanks
    Geoff

    Geoff, welcome to the discussions area.
    A model number of the AirPort Extreme would really help us help you here and minimize the chances of providing the wrong information to you.
    It's usually on the back or on the bottom of the device. Something like A1034 maybe?
    If you can't find the model number, you could take a chance with AirPort Utility 7.4.2 for Windows. No guarantees here, I'm afraid, but it won't take long to try.
    Both the Windows Firewall and/or anti-virus software on a PC may try to block the connection from AirPort Utility to your device, so you may need to go into the applications to "allow" the connection or temporarily disable the applications until you can configure the AirPort Extreme.
    Message was edited by: Bob Timmons

  • Airport Admin Utility for MAC

    Where can I find the latest download, the system says I need a later version to be compatible with my new airport extreme

    Where can I find the latest download, the system says I need a later version to be compatible with my new airport extreme
    Hello Peter Mason1. Welcome to the Apple Discussions!
    The new v5.x version of the AirPort Utility comes on the installation CD that came with your new 802.11n AirPort Extreme Base Station (AEBSn).

  • AirPort Admin Utility for Graphite and Snow

    There Any Way to get this working

    Apple says it's incompatible or "restricted from opening" (for now):
    http://support.apple.com/kb/HT3258

  • Airport Admin utility doesn't find basestation

    Hi. I'm having a problem where the Airport Admin Utility doesn't list my basestation on my PowerMac G5. The Admin Utility on the PowerMac G4 displays it fine.
    However, I can access the basestation from the G5 in Airport Admin Utility by clicking "other" and manually entering the ip address of the basestation. And I have no problem accessing the internet or the network from either machine.
    I'm using a 802.11b card in the G4 and I have the newer "g" card in the G5.
    Any ideas?

    This doesn't completely answer my question. It only mentions that Airport Setup Assistant no longer supports legacy basestations under OS X tiger 10.4.
    It doesn't mention about the Airport Admin utility. Which is what doesn't show/display/list the basestation in the select basestation window. Yet I have no problem using the internet.
    I can't believe Apple would completely abandon Airport Snow & Graphite basestation users. Is this true? Although My "Snow" basestation is about 4 years old it still chugs along adequately for my needs.
    Any other ideas?
    BTW... All my Macs are running 10.4.6 (the latest) so I would think my results should be the same on all Macs.

  • Non LAN IP address showing up in LAN in Airport Admin Utility

    Any help would be greatly appreciated! I have two Airport Expresses, with the second one (for AirTunes only) joined to the existing network of the first one. The strange thing is, the IP address in the Airport Admin Utility for the second one shows up as an ISP IP (ie 134.362.74.141) while the first (base) one shows as 10.0.01. To top it off, I've already factory reset the second one twice now, but I still get the same ISP IP addresses and I can't get its configuration profile to open via the Airport Admin Utility.

    If you hold in the reset button while plugging the Express unit into a convenient electrical receptacle, the old profiles will also be eliminated while the factory reset is done.

  • "Confirguration Error" in Airport Admin Utility

    When I start up the Airport Admin Utility, an error shows: "Configuration Error: This version of Airport Admin Utility does not support this base station. You can't update the software for this base station...."
    My system basics:
    Airport Admin Utility v420.31
    Airport Extreme (UFO) v4.0.9
    I cannot upgrade the Airport firmware due to the above error. I searched in the Apple support site and cannot find the later version of Admin Utility for download.
    Please help!!!!

    Since I am using Mac OS X10.3.9, I cannot use "Airport Utility".
    Actually, I try "Airport Admin Utility for Graphite and Snow" but another error message prompted up. That is :"Airport Admin Utility does not support this base statin. Use Airport Utility, located in the Utility folder...."
    So frustrated!!
    I try:
    Airport Admin Utility --> Failed
    Airport Admin Utility v4.25 --> Failed
    Airport Utility v5.x --> Failed not support in OS X10.3.9
    : (

  • Configuration Error with Airport Admin Utility. Where is the newer version?

    I am trying to make a change in Airport Admin . I am getting a pop-up saying
    "Configuration Error" This version of Airport Admin Utility does not support this base station. You can't update the software for this base station, but you may be able to make configuration changes to it". ...
    It says go to apple.com/support to locate a newer version - but I can't find one.
    Does anyone know where it is?

    Your first post indicated that you were using "AirPort Admin Utility".
    If you have the new square 802.11b/g/n AirPort Extreme base station (AEBS) ou don't want to use that.
    Instead you want to use "AirPort Utility".

  • "Configuration Error... download a new AirPort Admin Utility" Ok where?

    I just purchased a new airpot extreme. So far, no problems until now. I wanted to reconfigure it to add a password etc, but when I select "configure" in my current Airport Admin Utility (located: Applications - Utilities - Airport Admin Utility) I get the following message;
    Configuration Error
    This version of AirPort Admin Utility does not support this base station. You can't update the software for this base station, but you may be able to make configuration changes to it. Please go to www.apple.com/support to locate a newer version of the AirPort Admin Utility.
    It won't let me pass this warning. I've searched the support pages for the AirPort Extreme but havn't been able to find any new Admin Utilities. Only updates for the one I guess I don't have. Which is weird because my MacBook is not that old. It's Intel based.
    Someone, please help.

    Me again,
    Ok, say I threw that away, where can I go to download
    it?
    I had a feeling that what I needed was on the CD.
    Dang it. I'm so used to Apple being on top of
    updates and the like, that I've fallen into the
    routine of tossing out the CD's that come with what
    I buy. Otherwise I have a small libarary full of
    CD's and what nots to manage.
    There is the place to go:
    http://www.apple.com/support/airport/
    See "Update Your Software" in the lower right.

  • Airport Admin Utility can no longer access Airport Extreme, what now?

    I have an Airport Extreme that worked fine for a long time with a specific IP. They sold out and the new company came in and installed new equipment. The settings had to change on the Airport. After that, I lost my ability to print through the Airport USB port.
    I tried to resolve the problem the other day. My Airport Admin Utility saw the Airport, but I couldn't access it. When I clicked configure, a window came up saying "Reading configuration from base station", then a Password login window came up. I enter my password, it says "Reading configuration from base station", then it says "An error occurred while trying to access the base station. Make sure your network connection is valid and try again.". It does the same thing whether I enter the right or wrong password.
    It started working unexpectedly for a little while. I experimented with some settings. Now I can't access it again. The Airport Admin Utility sees the Airport as 10.0.0.0, my laptop's IP says 169.xx.whatever. I thought the Airport was supposed to distribute IP addressed. It did for awhile after I set it that way, but then it went back to 169.xx.whatever.
    I'm lost. I don't know how I will ever access the Airport again. Or get my printing capability back.
    Help!!!

    Ok. I'm going to try a reset on a day where I have some time to mess with it. There are some things I need clarified for me about settings. Please correct me as needed.
    In the internet tab:
    -Connect using Ethernet is selected.
    -Configure Manually was selected before as it is now.
    -IP address: do I use their IP or 10.0.0.0 or 10.0.1.1 or what?
    -Subnet mask: It used to be 255.255.255.0 now it's 255.255.0.0.
    -Router address: What do I put here, use their IP or 10.0.0.0 or 10.0.1.1 or what?
    -DNS servers: I will enter their DNS servers.
    -Domain name: blank
    -WAN Ethernet Port is selected Automatic.
    Under Network Tab:
    -Distribute IP adresses is checked.
    -Share a single IP address (using DHCP & NAT)used to be checked, now Share a rnage of IP addresses (using only DHCP) is checked.
    -DHCP Lease: 4 hours. What is best here?
    Do I really need to worry about anything else? If the password is reset how to I access from default settings?
    Thanks, after this I should have a better understanding of network settings and the AEBS.
    J-

Maybe you are looking for

  • Solution for Wacom Intous 4 tablet with LR 4.1?

    I'm having a problem selecting and dragging files from the library grid onto folders using my pen and mouse on the Wacom Intuos 4 tablet. I tried repeatedly to select all rejects from a shoot and drag them to a separate folder. When clicking and drag

  • Calendar events on lockscreen

    I am looking for what I would think is a simple app, but cannot locate it. I used to use a program calendar lockscreen in cydia on my iphone. I went to a razr this last weekend, tired of fighting with apple over what I can put on my phone. but lookin

  • Album song order changes when synced to i-pod

    On I-tunes the songs in the albums are in the correct playback order but when I sync it to my i-pod the some of the songs are in the wrong order. Everything looks ok when I look at the "get info" section. Any ideas?

  • Two camera footage: one drop frame, one non-drop frame

    We recently were delivered a batch of tapes for a two camera project that we're doing the post work on. The timecode was jammed to synch the two cameras. Unfortuantely, one of the cameras seems to be drop and the other non-drop. As a result, the tape

  • Data transfer processes and info packages in new client

    Hi, We have created new client from the development client. The Info cubes and update rules are available in new client, bu the data transfer processes and info packages are not moved to the new client. What is the actual sequence of steps to be foll