Where is Airport Utility on a PC

I have a Dell Laptop. I just bought an AirPort Express. I can't find the AirPort utility. when I search for it I get no results. Can I download it from somewhere?

Try AirPort Utility 5.6.1 for Windows - Support - Apple

Similar Messages

TS4597 AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3 - It did the above steps and cannot get airport utility to allow access to the Airport extreme in order to reconfigure please help

I tried following the article's instructions by going into System Preferences / Network and changing the configure ipv6 tab to Link local only and I STILL am getting the same error. Can someone please advise how to get this ariport extreme back online and configured

I'm in a frustrating predicament with this error, so if folks have any suggestions, that would be greatly appreciated...
A few days ago my internet stopped working as best i know out of the blue (3rd gen Airport Extreme with a couple iPhones, iPad, Apple TV's, Mac's (one with Mavericks) on it). In trying to fix it, I powered down everything and reset the router. When the router is initializing (seen through the Airport utility), the internet starts working again on the Mac in which I'm running the Airport utility. (a browser in background loads a previously unloadable webpage). I'm then left with a screen where the Airport utility is waiting for me to enter set-up info:
If I leave the Airport Utility in this state and don't hit next, my internet works fine on my Mac. If I set-up this info, however, my internet no longer works (in Airport Utility the Internet globe has a orange circle saying internet disconnected) and I get a screen saying "An unexpected error occured. Try again." I've tried toggling a number of router settings, restarting the router, but nothing seems to fix it.
I've taken the router to Apple, where they were able to create a network fine with the router. I also bought a new AE router, and tried an old AE express router, but all attempts get the same error. I've also tried using the iOS Airport utility, but that doesn't seem to help. I've tried the older version (5.6) of Airport Utility run on a non-Mavericks Mac, but that didn't help.
I had a ISP technician come out, but they basically said the plug (we don't have a modem, but just a ethernet plug in our apartment) in which you're getting the internet from us is working, and it's your router. They're diagnostics said the router is 'throwing off a bunch of errors.' That being said, they've confirmed the setting on the AE are okay (as far as they know...).
Any thoughts here? I'm not especially network-proficient, but searching around has pointed me to potential issues with mavericks, IPv6, and the latest version of the Airport Utility.
I'm desperate - please help!
Much thanks in advance.

I have connected a new time capsule to a dsl modem. It doesnt see the internet. Airport utility says: Disconnected. But it isnt. Internet tab shows PPPoE. Must I enter Account Name or Password? If so, where do I find them? If not, what do I do?

I have connected a new Time Capsule to a DSL modem using an ethernet cable . The modem is working fine and connected fine. But the Time Capsule doesnt seem to be talking to the modem. If I click the internet Icon in Airport Utility it shows Disconnected.If I click the Time Capsule icon and go to the internet tab it shows Connect using PPPoE. Is that what it should be? In the box below there is place for an account name and password. DO I need to filll these out and if so what do I put there--information about the Time Capsule of informationabout the Modem? And where do I find the information.
Or am I completely on the wrong track.

Thanks. The modem is a Speedtouch ST585 v6. How do I know whether it is in adsl bridge? Also this is a modem-***-router. Does that make a difference?
If you did not put it in bridge then it is not in bridge..
Connect a computer directly to the modem.. open the browser to either 192.168.1.254 or 10.0.0.138 (if neither of those work you will have to check the IP address your ISP has set).
BTW who is your ISP and do they allow PPPoE.. for instance most ISP in UK do not use pppoe so you have no choice but to run the 585 as a router. In which case bridge the TC
Anyway.. open the setup configuration in the Thomson and select a template that says bridge.. run through the wizard and it will then bridge the modem.
And I am using Airport Utility 6.0. How do I get the earlier version?
By reading the site link I just gave you.. downloading the utility and running it on your computer. Or simply google to 5.6 lion airport utility... that is the way I find things when I don't have the link memorised.
Finally, AIrport Utility shows a number in a red dot next to the time capsule icon, currently 2. What is that for? What does it tell us?
Firstly download the useful utility.. but the dots tell you something is wrong and preventing the TC from working.. if you open the utility it should tell you what the errors mean.. I cannot tell you what they are, but it is likely to be no internet connection and pppoe has failed.

Where has my airport utility window gone ? when I double click on the icon all I get is an image of a globe and a base station with no options to make changes in my airport extreme.

Where has my airport utility window gone? When I double click on the airport utility icon all I get is a picture of a globe and a base station with no further options available to modify my airport extreme.

Sorry, you lost me on that last post.
Let's start over again.
Open AirPort Utility on your Mac
Are you asked for a password at this point? If yes, enter the base station or device password that you used when you originally set up the AirPort router. Depending when you did this originally, you might have been given an option to use the same password as the wireless network. If you were not, then you have a separate password for the base station.
You need that password to be able to access the settings for the AirPort router in AirPort Utility.
If you see a window listing basic information, click Edit in the upper right corner of the window.
If you are asked for a password, you must enter the device password or base station password that you established when you first set up the AirPort router as explained above.
If you forgot the password, a Soft Reset will allow you to go in and reset the base station password. Might be a good idea to write down that password.
If you are still stuck, then the only option that you have at this point is to perform a Hard Reset to return the settings to factory defaults and then set up the AirPort router again.
If you prefer, you can also do a Factory Default Reset. It's the same as a Hard Reset except for the timing of holding in the reset button.

I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

sylviafromhanover wrote:
So I assume that the original modem stays installed with the coaxial cable and the Exrtreme is in addition to that.
Yes, that is correct.
Did you have the instructions that came with your Airport Extreme? Are you sure you have it setup properly? Here is the setup guide:
http://manuals.info.apple.com/en/airportextreme_802.11n_userguide.pdf
Ensure you have everything setup properly. Once you do this and if you are still having trouble, follow Star's instructions.

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

HT1281 Where do I find the "Archive" option for Time Capsule disk in AirPort Utility

HT1281 is exactly about what I am trying to do, but AirPort Utility does not look like this on my Mac (Lion). Where do I find the "Archive" option mentioned here?

Where do I find the "Archive" option mentioned here?
Apple left this out (along with a number of other features and functions) in the new "upgraded" AirPort Utility.
Suggest that you download and install AirPort Utility 5.6 for Mac OS X Lion , which offers far more functionality. This version was introduced on the same day as AirPort Utility 6.0, but apparently many users missed it.
You can keep both 5.6 and 6.0 on your Mac and use the one that you want.

Where do I find the port mapping option in the new Airport Utility?

I'm using the new Airport Utility w/ my AEBS. I'm running it in 802.11n '11a compatablity mode" w/ my Macbook (no 11n).
I can't seem to see the tab to set my port mapping. Where is it?
I don't see it in the Airport or Advanced settings in the Utility.

Are you in bridge mode? Under Internet > Connection Sharing, is the choice set to Off (Bridge Mode)?
Or... have you discovered that you can double-click on a base station or choose Manual Setup from the Base Station menu?

Where do I get airport utility 5.6?

Where do I get airport utility 5.6?? I need it for time capsule.

http://support.apple.com/kb/DL1536 For Snow Leopard and Leopard
http://support.apple.com/kb/DL1482 For Lion and Mountain Lion (needs a bit of work to run on ML, search this forum for more info).

I have an older airport express but don't know where to look to find its model number. The version number is airport utility 6.3.4 (634.17). Can anyone point me in the right direction? Thanks.

I have an older airport express, but don't know where to look to find its model number.
The version number is airport utility 6.3.4 (634.17).
Can anyone point me in the right direction? Thanks.

Hard to see it's so teeny. I needed a magnifying glass.
FWIW, you should not mark your reply as Solved because you did not solve your question. Helpful and Solved are used to reward the user who help you or solved your problem.

Where to find Airport Utility

I currently have an Airport Express which I'm using with my Macbook running OS10.4.9
Airport Administration Utility 4.2.3 is my current version, but I understand this has been replaced with "Airport Utility", perhaps v5? Does anyone know where to download this current version?
TIA,
rich
Macbook Mac OS X (10.4.9)

The new AirPort Utility v5.0 comes on the CD with the 802.11n AirPort Extreme Base Station. The v5.1 update is available via the AirPort Base Station Update 2007-001, but will only install if you already have v5.0 loaded.
There is a workaround...
- Download the AirPort Base Station Update 2007-001 file from: http://www.apple.com/support/downloads/airportbasestationupdate2007001formac.htm l
- Double-click AirPortBaseStationUpdate2007001.dmg to mount and display it's contents.
- From the AirPortUtilityUpdate window, right-click on "AirPortBaseStationUpdate2007001.mpkg."
- Select "Show Package Contents" from the pop-up menu.
- In the "AirPortBaseStationUpdate2007001.mpkg window, double-click on the "Contents" folder to open it.
- In the "Contents" window, double-click on the "Packages" folder to open it.
- Right-click on "AirPortUtility.pkg."
- Select "Show Package Contents" from the pop-up menu.
- In the "AirPortUtility.pkg window, double-click on the "Contents" folder to open it.
- Double-click on "Archive.pax.gz." This will create a new folder on your Desktop, named "Applications." The AirPort Utility will be inside this new folder. You can copy or move it to your Applications folder.

Base Station Update 2007-001: AirPort Utility - where?

I am confused (is this a surprise?):
The recent "AirPort Base Station Update 2007-001" (see link below) includes general fixes and compatibility updates for the following applications, and I quote:
- AirPort Utility
- AirPort Admin Utility for Graphite and Snow Base Stations.
I do have AirPort Admin Utility 4.2. So I download the update, but it tells me:
"You CANNOT install AirPort Base Station Update 2007-001 on this volume.
This update requires AirPort Utility 5/0 to be installed."
Pardon? I do have AirPort Admin Utility 4.2.
* Where can I get AirPort Utility in order to update AirPort Admin Utility?
Sure, if I buy a new square base station, I'll get AirPort Utility on a CD. But how to apply the fixes to my good old white spaceship and update AirPort Admin Utility? Looking for clarification. Thanks.
Update: http://www.apple.com/downloads/macosx/apple/application_updates/airportbasestati onupdate2007001formac.html

The old "Airport Admin Utility" 4.2.3 gets bumped to 4.2.5 and the name is changed to "AirPort Admin Utility for Graphite and Snow" since it is the only one still supporting the older models.
The bump from 4.2.3 to 4.2.5 must have fixed compatibility problems between the graphite/snow and "AirPort Admin Utility". If not, then owners of those base stations are going to experience problems.
Both Utilities can configure older Extreme and Express Base Stations.
It seems odd that one would be named specifically "...for Graphite and Snow"...

Airport Utility 5.0: Where is it?

Can anyone explain where Airport Utility 5.0 can be found? It is impossible to install Airport Base Station Update 2007 001 without it, but it doesn't appear to be available as a download.
Infuriated.

Hello ollywood. Welcome to the Apple Discussions!
Interestingly, Apple doesn't provide the new AirPort Utility as a download since it's provided on the installation CD that comes with the new 802.11n AirPort Extreme Base Station. Have you tried contacting Apple for a replacement CD?
As an option, here's a workaround...
- Download the AirPort Base Station Update 2007-001 file from: http://www.apple.com/support/downloads/airportbasestationupdate2007001formac.htm l
- Double-click AirPortBaseStationUpdate2007001.dmg to mount and display it's contents.
- From the AirPortUtilityUpdate window, right-click on "AirPortBaseStationUpdate2007001.mpkg."
- Select "Show Package Contents" from the pop-up menu.
- In the "AirPortBaseStationUpdate2007001.mpkg window, double-click on the "Contents" folder to open it.
- In the "Contents" window, double-click on the "Packages" folder to open it.
- Right-click on "AirPortUtility.pkg."
- Select "Show Package Contents" from the pop-up menu.
- In the "AirPortUtility.pkg window, double-click on the "Contents" folder to open it.
- Double-click on "Archive.pax.gz." This will create a new folder on your Desktop, named "Applications." The AirPort Utility will be inside this new folder. You can copy or move it to your Applications folder.

I just got a new Windows computer and need the download the airport utility for base station model A1408. Where do I find the download?

I just got a new Windows 7 computer and need the download the airport utility for airport extreme base station model A1408. Which download is it and where do I find it?

If you Google AirPort Utility for Windows 7......this is the first item that comes up:
AirPort Utility 5.6.1 for Windows - Apple

HT1338 where can i find the download for airport latest version of airport utility?

Where can i go to download the latest version of airport utility?

Hello,
http://support.apple.com/kb/index?page=search&fac=Downloads&q=airport%20utility
http://support.apple.com/kb/DL1664

Where is Airport Utility on a PC

Similar Messages

Maybe you are looking for