Where is API Gateway Functionality

Our GroupWise system is currently on NetWare servers. We want to move our GroupWise system to run on Windows servers.
There seems to be no API Gateway for Windows. How can I still do the things the NLM API gateway supported, when running GroupWise on Windows servers???

dafitt wrote:
> How can I still do the
> things the NLM API gateway supported, when running GroupWise on
> Windows servers???
You can't......
But since I don't know what you used it for, then this just might be
your solution:
http://www.jrbsoftware.com/jrbutils_nw/overview/
Tommy Mikkelsen
IT Quality A/S, Denmark
Novell Support Forums SYSOP
Sorry, but no support through email
Be a GroupWiseR, go http://www.groupwiser.net

Similar Messages

  • Exchange Gateway or API Gateway

    We're running GroupWise 7.02HP1a on both NetWare and Linux. We're looking to cooperate with an Exchange 2003 system (maybe 2007 with a 2003 intermediary).
    Not sure whether to use the Microsoft Gateway with API Gateway on the Novell side, or the Novell Exchange Gateway. Does anyone have experience with both that can comment on which one seems to function better? Is it a toss up and just a matter of preference?
    Thanks for any feedback,
    Ryan

    Originally Posted by ukdtom
    Use the Novell Exch. Gateway....
    The API one was before html was invented, so I doubt it supports html based mails
    Also...The Novell Exch. gateway is under constant development, where the API one hasn't been developed
    since GW4
    Ahh ok :) Thanks for the response... I'll push for the Novell Exch. Gateway.

  • Datasync Connection thats like the GroupWise 4 API Gateway

    At GWAVAcon or BrainShare it was discussed a connector that worked like the old GroupWise 4 API Gateway. I have be looking for the software and documentation for it but have not found it. Is it released, and if so what is it's name, where is the software and documentation?
    Rich

    richardherr,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • API Gateway snapins needed

    Why is it so hard to find the API Gateway snapin for NWAdmin? Where can I
    get them? Thanks Mike

    Deleted and recreated the API Gateway but I don't have the "Required
    Parameters" or the "Directory Synchronization" tabs. Tried using NWAdmin32
    in 3 different Groupwise 6.5/Netware 6.5 systems but I can't get the tabs.
    The gateway ojbect and the rest of the tabs are there. Any additional ideas?
    Thanks Mike
    > This is correct.
    >
    > I just retried, and it worked nicely here.
    >
    > I suggest you nuke the API Gateway, and then recreate it using NWAdm32
    >
    >
    > --
    > Best Regards
    >
    > Tommy Mikkelsen
    >
    > IT Quality A/S
    > Denmark
    >
    > Novell Support Forums SYSOP
    >
    > Please Report back any success or failure, That way we all learn
    >
    > Sorry, but no support through email
    >
    > "I hate bugs".......Tommy Lee Jones, MIB
    >
    > Be a GroupWiseR, go http://www.groupwiser.net

  • API Gateway address formatting

    hi all,
    I just installed the API Gateway succesfully. I can send email from and
    to all directions. There is one but.
    When i receive a message from (for example) [email protected] the reply
    address in outlook/exchange is com.domain.person.
    How of where can i correct this?
    Thanks in advance.
    winglo

    KICK!
    Found it, and wanted to share it with you in case more people have the
    same problem:
    just manually add in the registry
    Make sure that the value of the
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\LME-GWISE\Parameters\AssumeARIisInternetDomain
    subkey is set to 1.
    Make sure that the value of the
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\LME-GWISE\Parameters\ListofGWIAs
    is set to domain.gwia,domain2.gwia,domain3.gwia.
    Note Both these registry entries are String values.
    Regards, Wing
    winglo

  • API gateway/NWadmin/Require parameters tab

    I installed the API gateway. When I create the API object and attempt to
    configure it, the "required parameters" tab does not appear where I can edit
    paths. Am I missing something?

    You need the GW5.5 snapins to make that work. Do you have a full set?
    On Mon, 10 Sep 2007 18:37:59 GMT, "Jim Alexiou" <[email protected]>
    wrote:
    >I installed the API gateway. When I create the API object and attempt to
    >configure it, the "required parameters" tab does not appear where I can edit
    >paths. Am I missing something?
    >
    Tim
    Tim Heywood (SYSOP)
    NDS8
    Scotland
    (God's Country)
    www.nds8.co.uk
    In theory, practice and theory are the same
    In Practice, they are different

  • Ever since installing iCloud and Lion my computer is slow or freezes.  The color wheel comes on and My work stops.  I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem.

    Ever since installing iCloud and Lion my computer is slow or freezes.  The color wheel comes on and My work stops.  I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem. I'll get 20-30 minutes of work done and then a sync or something comes on, the color wheel of death shows up, and my productivity is shot.  I have to shut the computer down the hard way!  when it comes back up, it is still either frozen or slow.  I've checked in at the genius bar and all they say is that there have been some problems that Apple is trying to fix.  It effects Mail, Contacts, Safari, Calendar....yeah, pretty much everything.  My iPhone and iPad are not effected as much so I end up doing what I can with them.  I've seen the blogs out there and understand that many have the same problem.  I have been waiting to read about a fix but I have found nothing!  Any ideas?

    Not enough free space on the startup disk can slow the system down.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
    For startup issues...  open System Preferences > Users & Groups - Login Items. Delete any apps listed there then restart your mac.
    And disable the Lion "resume" feature.
    Open System Preferences > General
    Deselect:   Restore windows when quitting and re-opening apps
    And Spotlight may be indexing... you can turn that off > Turning Off Spotlight | Mac Tricks And Tips

  • Where is the activity function gone? in version 6 Safari

    Where is the activity function gone? in version 6 Safari. I may have updated from a previous version around the beginning of August 2012.
    I came to use this function only to find it missing??

    Safari 6
    Apple removed Activity Window in Safari 6.
    Best.

  • Can't find where to enter gateway ip and apn in no...

    hello,
    I am trying to configure internet access in nokia 2630 but just cannot find where to enter gateway ip and apn!
    I had not such problem with any other phones!

    Thanks Gifts4me. So there is no option in: Finder Prefs/Advanced/Zoom using Trackpad?
    Or is it not just in finder that you have this problem?
    lovel3i, as it says in the title and in the post, I'm using 10.5.

  • How to use java api for function activity in embed oracle workflow?

    because i can't install standalone oracle workflow successfully.
    pls tell me how to use java api for function activity in embed oracle workflow?
    are there some patch or pulg-in package?
    ths a lot...........

    The Java Function Activity Agent is not certified for Oracle Workflow embedded in Oracle Applications. Installing standalone workflow should be a lot easier than what you have found, although it looks like you did hit a Pentium 4 issue with the Oracle Universal Installer. I suggest you contact Oracle Support or Oracle Consulting for assistance.
    because i can't install standalone oracle workflow successfully.
    pls tell me how to use java api for function activity in embed oracle workflow?
    are there some patch or pulg-in package?
    ths a lot...........

  • Where condition on a function

    Hello,
    I'm having little troubles while writing a query for which is needed a where condition on a function.
    Here a little example:
    select id_vehicle from vehicle_list where id_user = 1 and function(id_vehicle) = 1;
    that function is using locator (quite heavy).
    as I would like to execute the function just for the id_user = 1 and not for the whole table (like it seemed it does in the privous query) I tried this second:
    select id_vehicle from (select id_vehicle from vehicle_list where id_user = 1) where function(id_vehicle) = 1;
    Nothing changed, neither the execution explain.
    Finally I found this syntax, that works as I would:
    select id_vehicle from vehicle_list where id_user = 1 group by id_vehicle having function(id_vehicle) = 1;
    Is this the only solution to achieve my goal?
    Thanks in advance,
    Samuel Rabini

    Karthick_Arp wrote:
    Samuel Rabini wrote:
    Hello,
    I'm having little troubles while writing a query for which is needed a where condition on a function.
    Here a little example:
    select id_vehicle from vehicle_list where id_user = 1 and function(id_vehicle) = 1;
    that function is using locator (quite heavy). Locator? I don't get you what is that? Probably some geo/spatial stuff.
    >
    as I would like to execute the function just for the id_user = 1 and not for the whole table (like it seemed it does in the privous query) I tried this second:
    select id_vehicle from (select id_vehicle from vehicle_list where id_user = 1) where function(id_vehicle) = 1; For oracle both the query are the same. Search the document for predicate pushing and read it.
    You are in a wrong assumption that the function is applied for all the row in the table. Its only applied on the rows for which id_user is 1. How to check it? just pas id_user as and parameter to the function and print it in the function. You will get to know that. not always. it depends on many factors. The CBO might decide that the condition with the function will return less values then the id_use=1 condition. Therefore it might choose to execute the function first. An execution plan including join predicates would also show this.
    There are some ways to influence the optimizers behaviour regarding function. One is to make it deterministic (if possible). Also one could give addition info to the optimizer about the function. Dynamic sampling could also be helpful, altough I'm not so sure in this case.
    I myself would prefer to write the query in such a way that the optimizer is forced to execute it as late as possible.
    There are different ways how to do this.
    Using a subquery and a sort operation (order by, group by ) is one. That's why it was working for the op. Problem is this additional sort operation has its own performance cost.
    Using COALESCE can be another way. It might be difficult rewrite the query in this case. But coalesce is one of the few commands (or the only one?) where the second parameter is not executed if the first one is fulfilling the condition.
    Last but not least you can use hints to prevent the subquery rewriting.

  • Where to define remote function module name in RFC adapter

    R/2(IDOC) <->XI <-> R/3 (RFC)
    I can only define remote server information in RFC receiver adpater, but where to define the function module on remote server&#65311;

    Hi,
    the communication channel need the request in an specific xml format.
    Part of this format is the function modul name.
    when you use an imported rfc module you have automaticly the right xml format which the communication channel understand.
    the Communication channel need as root tag the function module name
    like:
    <ns0:Z_MY_FUNCTION xmlns:ns0="urn.sap-com:document:sap:rfc:functions">
    so it is with xslt mappings (for example) as well possible to call a rfc modules without importing it into your repository.
    regards,
    Robin

  • Assigning multiple interfaces for Oracle API Gateway (OAG)

    We are deploying Oracle API Gateway to throttle our incoming API requests. We would like to keep the incoming external API requests separate from the internal configuration management so that they go through different interfaces when accessing the OAG server. This is mainly for security reasons so that the external people won’t have access to the interface used by internal operations team to manage OAG. Based on your experience, is there any standard best practice to accomplish this? We were thinking to perhaps use two of the server’s network interfaces with different IPs, one for the incoming API requests and the other for the internal admin management of OAG. But not sure if this is the best way to do what we need. We are aware of OAG's capability to support two separate ports to handle this situation, but would like a more secure set-up that could completely eliminate external access to the OAG management done by the IT team.
    Would appreciate any thoughts on best practices used regarding multiple interfaces for OAG set-up. Thank you. Oracle Marketing Cloud.

    You are on the right track.
    Here is how you can achieve this:
    You can use multiple network interfaces on the UNIX machine and setup networking/routing in such a way that all external traffic comes on on one card and is routed internally via a different card.
    Segregate difference types of services (i.e to be used by external clients vs internal apps) into difference different "Service Groups". Have each of these service groups listen on different port + NIC card (under Listeners, you can define a port to list to list on a specific network address and port instead of *).
    Setup additional protection for services that will be accessed by external clients. Use "Threatening Content " filter to protect your services.
    Setup 2 way SSL for the interface that will be called by external clients. Setup a DN based authorization check if you want to have both authentication and authorization.
    Hope this helps.
    -Thanks,
    Ankit Kumar

  • GroupWise 7.0 API Gateway is supported for Exchange 2007?

    Can someone confirm that GroupWise 7.0 API Gateway is supported for Exchange 2007?
    I found a note in a guide that stated it was not YET supported as of 1/27/2008.

    bwalker2,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • How can and where i use the function "HTMLDB_UTIL.CLEAR_PAGE_CACHE "

    how can and where i use the function "HTMLDB_UTIL.CLEAR_PAGE_CACHE " ?
    where is the place to put this function?

    i have notice that sometime, during visual a report of a table, order by data insert desc, some record are not displayed on some client.
    Only whe we clear the cache of internet explorer than this record can view.
    I have an idea that a clear page when i call the report may be solve the problem.
    Thank's.
    ------------------------

Maybe you are looking for