Where is apple mobile usb driver

since the update of itunes last week, I have lost my mobile usb driver... where can I find it? thank you muchly

http://support.apple.com/kb/ts1538  open this articlle, and then click on number 5. Follow the directions for your specific computer to check and see it the APPLE MOBILE DEVICE USB DRIVER is installed. If it is not listed, check in "Portable Devices" There you will most likely see a entry "Apple iPhone". If so click on this link to update the Mobile device driverIf only Apple iPhone, Apple iPad, or Apple iPod appears  After you update the driver, iTunes will recognize your phone again

Similar Messages

  • Computer can't get the apple mobile usb driver to install?

    I get the error that the computer can't get the apple mobile usb driver to install so it won't show up on my computer or in itunes.It actually says Device Driver Software Not Sucessfully installed. Apple Mobile Device USB Driver failed. I'm using windows 7 which is fully updated, I have downloaded the newest itunes and also uninstalled and reinstalled it ans all of its components. I have followed every guide to sync your device to the computer and itunes, none of it has worked. I have unplugged my computer and tried it, I have taken the battery out of the computer and waited a few minutes and tried it. I have even gone into Device Manager looked under universal USB controllers and see an exclamation point next to the apple driver where its not working. I can click on it and tell it to look for the newest software and it says it's up to date and still not working. I have tried ever single usb advice or apple advice I can find over the last 3 hours and nothing is working. Please someone help me. I need to restore my ipad and I can't get it to show in itunes! please someone help!

    Make sure Apple Mobile Device USB driver is properly installed.

  • No Apple Mobile USB Driver in Device Manager

    I have tried to reinstall Apple Mobile Device Driver, but when I follow the necessary step to scan for hardware changes the Apple Mobile USB driver doesn't appear. (for reference: http://support.apple.com/kb/TS1538) I am trying to get an Iphone 5 recognized by Itunes. It still pops up in My Computer and Autoplay (images mostly). But I would like to back up this Iphone 5. Please help, thank you.

    see this
    iOS: Device not recognized in iTunes for Windows

  • TS1538 apple mobile usb driver

    My Window 7 computer has deleted the Apple Mobile Device USB Driver. Itunes won't recognize any of our iphones. Frustrating. Plug the phones in come up with unknown device. Any suggestions. Have changed USB Cable and tried different ports.

    See section 4 of this support document, it will explain how to reinstall the Apple Mobile Device USB Drive http://support.apple.com/kb/TS1538

  • How can i download a mobile usb driver?

    My hard drive recently crashed and I have had to redownload everything. I have downloaded itunes, but when I try and hook up my ipod it says I need an apple mobile USB driver. How can I download that driver?

    You can either use the manufacturer-supplied driver or NI-VISA to control your USB device but not both. If you have installed your device, each time you plug it in the FTD2XX.inf will associate your device with FTD2XX.sys. Then, you can use FTD2XX.dll to talk to your device using the call library function node. The DLL usually contains a whole bunch of useful functions that someone else already designed to talk to your device. This is the easier route and I would recommend it if you already have the DLL and the installed driver.
    The second method would be to uninstall or disable the driver for your device and create an .inf file with NI-VISA Driver development wiazard. This .inf file will tell Windows to use VISA as your device driver. You will, however need the vendor and product ID of the device to use VISA as your driver. The details of this are outlined in the NI document "Using VISA 3.0 to control your USB device."
    The drawback of this method is that VISA is just an API to talk to your device and you have to implement the communication protocol to talk to your device. This might take some time to do.
    This is why I recommend the first method. Someone else already implemented the driver for your and you just have to use the functions from the dll to implement your application.
    Hope this helps.

  • Missing  apple mobile device driver

    I have a new Itouch that I am able to sync on my laptop but not on my desktop. When I plug the Itouch into the USB porton my desktop, it is recognized as a camera. I have installed and uninstalled the latest version of Itunes several times with no results. It appears that the only difference in the installation of Itunes between the laptop and the desktop is that it appears that I am missing the apple mobile device driver (verified by going through the apple doc #306640)on my desktop. Running Xp with service pack 2 on both computers. Why isn't this component being loaded into my desktop and where can I obtain it? Thanks.

    Try uninstalling the following items in order:
    Apple mobile device (might not be installed)
    Apple software update
    iTunes
    Quicktime
    Now restart computer.
    Now download itunes743setup and save it to your desktop.
    Disable any anti-virus and internet security.
    Now install itunes.
    If this does not work, then there is something blocking the apple mobile device from installing.
    this article from the apple support website will help turn everything off except what the computer needs. http://docs.info.apple.com/article.html?artnum=302538
    Uninstall the items previously mentioned.
    Restart the computer again.
    Then install itunes again.
    The apple mobile device driver is installed with itunes.
    Hope this helps.

  • Can some one help me with diagnostic test result " apple mobile device driver not found"?

    I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone.  I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?.  iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
    when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
    I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 10.6.3.25
    QuickTime not available
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0013AC2C08548378
    Current user is an administrator.
    The current local date and time is 2012-06-28 15:23:45.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
    Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Thu Jun 28 15:17:19 2012
    Lease Expires:       Fri Jun 29 03:17:19 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    G: Optiarc DVD RW AD-7220A, Rev 1.01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.3.25 is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
    This is my post:
    https://discussions.apple.com/thread/4063223
    Please, we need your help.

  • Old iPod mini can't be recognized after formatting, and iTunes 'Apple Mobile Device Driver not found.'

    My roommate gave me an old iPod Mini a few days ago. It was working fine 'til I plugged it into my computer and it asked me to format it. I did, and now it cannot be recognized by iTunes or my computer. My computer views it as a "removable disk" which cannot be accessed. In devices, it is listed as an Apple iPod though, so I'm hoping not all is lost. I have tried many quick fixes I've read on internet (including changing disk letter) but to no avail. I have reinstalled the new iTunes and now that is telling me it has not installed properly, and when I ran diagnostics, it reads that the Apple Mobile Device Driver not found. I will copy & paste all the info from the diagnostic run below, and if anybody can help me with my new (old) iPod, I'd be everly greatful!
    Thanks!!
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    TOSHIBA Satellite L775D
    iTunes 11.0.1.12
    QuickTime 7.7.3
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver Not Available
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number
    Current user is not an administrator.
    The current local date and time is 2013-01-08 11:16:27.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD Radeon(TM) HD 6520G   
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.0.1.12 (x64) is currently running.
    iTunesHelper 11.0.1.12 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller.  Device is working properly.
    Standard Enhanced PCI to USB Host Controller.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod mini running firmware version 1.4.1
    Serial Number:    JQ******S42
    <Edited By Host>

    OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
    What i knew about iPhone before buying it:
    What You Need
    To use iPhone, you need:
    A new two-year wireless service plan with AT&T
    A Mac or a PC with a USB 2.0 port and one of the following operating systems:
    Mac OS X version10.4.10 or later
    Windows XP Home or Professional with Service Pack 2 or later
    Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
    iTunes 7.3 or later, available at www.itunes.com
    An iTunes Store account
    An Internet connection
    You must be at least 18 years old to open a new AT&T wireless account. You will need a
    major credit card to open a new iTunes Store account.
    Yeahyeah check all that stuff;
    Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
      Windows Vista  

  • IPod nano 4th gen - Apple Mobile Device Driver issue

    I have an iPod Touch that connects and syncs perfectly with iTunes but I can't find any way of doing the same with my wife's iPod Nano(4th gen).
    Whenever I connect the nano it appears under Universal Serial Bus Controllers as Apple Mobile Device USB Driver but with the dreaded Yellow Exclamation mark.
    I've tried:
    The 5Rs
    Different cables
    Different ports
    Disabling drivers
    Uninstalling drivers
    Removing all Apple software (in the correct order) and reinstalling
    The only error message I get, other than the Exclamation Mark, is when I check the Driver Properties, it shows "This device cannot start. (Code 10)".
    If I click on Properties, Driver and Update Driver, Install from specific location I see:
    Apple iPod USB Driver Version 6.0.9999.40 (12/11/2008) and
    Apple iPod USB Driver Version 6.0.9999.61 (11/05/2012) and
    USB Mass Storage Device
    Does anyone have any other suggestions as to what I can try?

    The code 10 might be caused by old driver componentry "stuck" in the bowels of your OS. If that's what is going on, we might be able to get past this ... but I'm afraid it's a bit of a performance.
    First, go into "My Computer". Go "Tools > Folder Options". Go to the view tab.
    Make sure "Show hidden files and folders" is selected.
    Make sure "Hide extensions for known filetypes" is unchecked.
    Make sure "Hide protected operating system files (Recommended)" is unchecked.
    Click OK.
    Now in "My Computer", open "Local Disk C:" or whichever drive your Operating System is installed on.
    Open the "Windows" folder.
    Open the "system32" folder.
    Open the "DRVSTORE" folder.
    In there look to see if you have either of the following two folders:
    netaapl_(LongStringOfNumbers)
    usbaapl_(LongStringOfNumbers)
    If you find either of them, drag them out onto the desktop. (Don't touch any other files or folders you see in there.)
    Now go back into the "system32" directory.
    Open the "Drivers" directory.
    Look for either of the following two files:
    netaapl.sys
    usbaapl.sys
    If you see either of them in there, drag them out onto the desktop. (Again, don't touch any other files or folders you see in there.)
    Now restart the PC. Try a complete uninstall/reinstall of itunes and related components as per the following document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    ... and then try connecting the nano again. Any better luck this time?

  • Apple mobile device DRIVER does not load/ is not installed

    this is what my itunes diagonstic says concerning connectivity tests
    Microsoft Windows 7 x64 Ultimate Edition (Build 7100)
    Hewlett-Packard HP Pavilion dv2700 Notebook PC
    iTunes 8.1.1.10
    QuickTime 7.6
    FairPlay 1.3.6
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    *Apple Mobile Device 2.4.1.7*
    *Apple Mobile Device Driver not found.*
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number 88107370E6DED672
    Current user is not an administrator.
    The current local date and time is 2009-05-16 00:21:13.
    iTunes is not running in safe mode.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.1.1.10 is currently running.
    iTunesHelper 8.1.1.10 is currently running.
    Apple Mobile Device service 2.12.36.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
    Most Recent Device Not Currently Connected:
    Fifth Generation iPod (iPod with video) running firmware version 1.3
    Serial Number:
    i found it out that the apple mobile device is running yet there is no driver that is loading so that it can recognize my iphone
    any suggestions on how to get the computer automatically to search the driver in the system32/drivers folder?
    i already tried downloading the driver and copying into the folder and doing restart
    i've also tried to reinstalling itunes and i used winrar to extract the applemobiledevice support and repaired but it didn't do anything
    are there any other suggestions?

    Sorry, I should have qualified that: in the past I have given dump/debug/log details to people in the 'Windows' world to try to solve problems that I've thought have needed immense details to resolve but since owning a Mac I have discovered that if I am thinking at that level of detail then I have lost the real plot and my pulling back and looking at things simply again has been an eye-opener, hence my suggestion in response to your question to simply 'get a Mac'.
    Part of the 'issue' with Windows seems to be its varieties and variants (Windows 7 x64 Ultimate Edition (Build 7100), for example) and the range of various and variable hardware on which it can run, too often with random and non-deterministic results, not to mention the almost limitless and unnecessary combinations of user-configuration options and requirements!
    Seriously, get a Mac if you are into the Apple world, even on the periphery, if you want an easier life (in my experience).
    Good luck with your 'issue'.

  • ITunes & Apple Mobile Device Driver Not Compatible w/ Windows 64bit Systems

    In short, I spent over 2 hours on the phone tonight with Apple Support. The call was elevated to a software engineer. After several minutes he apologigized and state the Apple Mobile Device Driver is not compatible with Windows 64Bit systems.
    Therefore I can't activate or do anything for that matter. I effectivly have a $600 paper weight. I asked the engineer if they have any intention fixing it and never received a direct response.
    None of the documentation that I have found states 64bit Operating Systems are not supported. The support rep stated nor he or his collegues were unware the mobile device driver didn't support 64 bit OSs either. I consider this to be really misleading and a huge oversight on Apple's part.
    I wrapped up the call by asking him how I go about returning the device without being struck by the 10% restocking fee. He didn't know.
    Anyone have Steve's number? I sure would be nice to get at the minimum a full refund.
    I just thought everyone else should know so you don't tie up support lines and waste your time trying to find a resolution.
    Regards,
    KSPad

    OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
    What i knew about iPhone before buying it:
    What You Need
    To use iPhone, you need:
    A new two-year wireless service plan with AT&T
    A Mac or a PC with a USB 2.0 port and one of the following operating systems:
    Mac OS X version10.4.10 or later
    Windows XP Home or Professional with Service Pack 2 or later
    Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
    iTunes 7.3 or later, available at www.itunes.com
    An iTunes Store account
    An Internet connection
    You must be at least 18 years old to open a new AT&T wireless account. You will need a
    major credit card to open a new iTunes Store account.
    Yeahyeah check all that stuff;
    Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
      Windows Vista  

  • Can I download an apple device usb driver to my windows 7

    is it possible to download an apple device usb driver to my windows 7

    USB drivers are part of Windows OS.
    What are you having problems with?

  • Is there an update for Apple Mobile Device driver on Windows 7?

    is there an update for Apple Mobile Device driver on Windows 7?

    Hello Ken C.,
    Thanks for using Apple Support Communities.
    Apple Mobile Device Service is included in the installation of iTunes.  As long as you have the most up to date version of iTunes on your computer, you will have the most up to date driver.  Are you having any issues with iTunes and syncing your devices?
    How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
    Happy Holidays!
    Alex H.

  • Apple Mobile Device Driver issues

    First let me start that I have read dozens of pages on the various Apple sites which attempt to help fix this problem - some are just plain awful, some make no sense at all (disconnect cable, do x y and x, but no instruction ever to re-connect cables - well how is that going to fix anything). Anyway my primary machine is a Vista Ultimate (32 bit) laptop, with iTunes 10.0.1.22 and the library on a NAS device. I have several iPods, including a Touch and they all connect and synch easily with iTunes. Two days ago I received an iPad and connected to this machine and got the dreaded - load drivers, errors, followed by the Driver load failed messages. Spent 1+ hours trying all the advice to no affect. The Device Manager shows no indication of the Apple Mobile Device driver and only shows the iPad for a short time under Other Devices with an Exclamation point. No note of a Mass Storage device there or in Windows Explorer. I then connected the iPad to my Windows & machine and it immediately was recognized and sync'd with iTunes. This afternoon, I went thru the same aggravation with a brand new Shuffle. No dice on the Vista machine, immediate success on the Windows 7 machine. Isn't there a SIMPLE way to get the driver installed properly under Vista. Pointed the driver process to the C:/Program Files/Common Files/Apple/Mobile Device Support/Drivers and there is some action, I see the driver, but again some process kicks in and the whole device driver failure process starts again.
    This whole process is giving me a bad taste for i_software. I consider myself a sophisticated computer user (IT professional with hands-on PC experience for 20 years).

    I agree, but I have 2.5 years on this Vista machine and upgrading it to Win7 really means tossing it - not a bad idea; but next week I migrate my work PC (XP!!) - and I can only take 1 excedrine migrane a day!

  • Apple Mobile Device Driver not found. ...

    Nor Itunes neither my PC can view my Iphone, what is more, it is completely discharged.. Here's the diagnostics...
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver not found.
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 0012B2100AAF8C28
    Current user is not an administrator.
    The current local date and time is 2011-06-30 20:40:04.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 220M  
    **** External Plug-ins Information ****
    Plug-in Name:          MiniLyrics Visualizer
    Plug-in Loaded:          Yes
    Plug-in Version:          0.8
    Plug-in File Version:          Unknown
    Plug-in Path:          C:\Program Files\iTunes\Plug-ins\iTunesMinilyrics.dll
    Plug-in Name:          Last.fm AudioScrobbler
    Plug-in Loaded:          Yes
    Plug-in Version:          1.0.4
    Plug-in File Version:          3.0.4.0
    Plug-in Path:          C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
    Genius ID: 46b8dbeb48d2ea73f185160d9ef3debd
    **** Device Connectivity Tests ****
    iPodService 10.3.1.55 is currently running.
    iTunesHelper 10.3.1.55 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Note: I simply unnistalled all apple programms, when my Iphone had errors, and installed the newer version... Maybe it is the reason why my Iphone is not being seen...

    I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
    This is my post:
    https://discussions.apple.com/thread/4063223
    Please, we need your help.

Maybe you are looking for

  • Can I use a windows 8 installation disc for bootcamp or must I have a windows 7 disc?

    Hello I'm new to this but apparently i need a windows disc to operate bootcamp and I'm not sure if I can use a windows 8 disc to install it with. Also is there a website or place I can purchase a windows 7 incase I need a windows 7 to install it with

  • Copying from sales document type QTH to HU is not supported

    guys i was trying to create a contract based on a quotation created by me  here QTH is my quotation type and HU is my contract type the error i encountered was thiss. Copying from sales document type QTH to HU is not supported .

  • Project Pro 2013 Crashing - has something to do with Global Views and or Tables?

    I have 800 or so active project files in my 2013 PWA instance. I am just starting to get my head around this potential bug. I have not reproduced it yet but I have seen it a number of times. MS Project Pro randomly freezes after one of the following

  • Additionals Articles in Outbound Delivery.

    Hi Experts, I am very new in SAP Retail and I need your help for creating an end to end scenario for additionals articles. So here is an overview that so far I've done. Please let me know if you think that it might be a missing configuration or funct

  • Infopath form as Agent test

    Hello.  We've set up numerous InfoPath Forms as tests for our agents to take to test their industry/company knowledge of our business.  I use drop-down list box fields for each question but use option buttons in the form itself.  We set 3 of the "Val