Where is CMOS battery in Compaq Presario R3000

I have a Presario R3000 that refuses to start.  Upon pushing the start button I get an LED flash for perhaps less than a second then the PC goes out again.  I suspect the CMOS and RTC battery but I don't know how to get to it to "reset" the CMOS.  I have looked through several service manuals but the only reference I find is NOT for the R3000.  Please help.
BTW, I have go through the start procedure with & without the power battery, w&W/O the disk drive, etc - no change.

Choose your model here, then look at User Guides :
http://www8.hp.com/us/en/support-search.html?tab=2#/qryterm=Presario%20R3000&searchtype=s-001
Try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • How can I change the cmos battery in the presario r3000

    how can I change the cmos battery in the presario r3000

    Hello dgreen631. I understand that you'd like to replace the CMOS battery in your notebook. Is this correct?
    What you need is the Maintenance and Service Guide for your notebook. Here is a link. While it does not have a specific section for replacing the CMOS battery it does cover the disassembly of the notebook and should provide you with the needed information to perform the replacement.
    I hope this information is helpful; have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Multimedia audio controller driver for windows 7 on compaq presario r3000

    I installed Windows 7 on Laptop Compaq Presario R3000. Everything is fine, however, multi media controller driver was not installed. I would appreciate if you let me know where I can get it. I have Driver CD for Windows XP that came with my computer. Thanks.
    This question was solved.
    View Solution.

    You're very welcome.
    Looks to me like you have to manually install the XP audio driver as follows...
    Download and run this file.  If it installs the audio, great.  If not...close out of any error windows.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-18403-1&cc=us&dlc=en&lc=en&...
    Go to the device manager and click on the multimedia audio controller needing drivers.
    Click on the driver tab.  Click on Update Driver.  Select the Browse my computer for driver software and browse to:
    C:\SWSetup\sp27325\SMAXWDM\W2K_XP\smwdmNV8, and select the SoundMAX Integrated Digital Audio device from the list and see if the driver installs that way.
    Then reboot.

  • Compaq Presario R3000 how to get the sound to work with Windows 7 RC

    1) Download     SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe
    2) Run it, Create a directory  c:\ swsetup 
    3) Once all the Files are extracted DO NOT INSTALL
    4) Now Goto the Start Menu  Click on Devices and Printers, the Click on the Name you have called your  machine this will be marked will a yellow triangle as the sound driver windows 7 has install already is a realtek ac 97 which is not working, 
    5) Once your Machinename  you will see a general tab and and hardware tab select the hardware tab.
    6) Look for the Realtek ac 97  under the Device functions, select that and click properties,
    7) Now tab to the Driver, now click update driver,
    8) Select the option let me pick from a list of devices drivers, now click have disk
    9) Click on Browse  select the following location Swsetup\SP29586\SMAXWDM\W2K_XP and click on  smwdmCH6.inf 
    10)Now the Soundmax Driver should come up select ok and  next. Now your Sound will work
    This question was solved.
    View Solution.

    I am basicaly having the same problem with my labtop. I tried the following above and yet I still have not been able to get my sound to work. I have had some problems with my power and sound cards before but after I reinstalled windows my graphics card and sound card have not been working to their full potential. I thaught that it was a 64 bit graphics card, but now I am not so sure. I had to jostle the power cord in the back till I mannaged to find a perfect spot to keep the computer running. Before the reinstallation I had to put pressure on the left side of the computer to get the sound to work.. but even then it still came in and out.. "The sound that is." I can see the same driver in the codex menue and it is yellow but, what you stated above did not work.
    It says (Cannot continue the hardware update) The wizard cannot find a better match for your hardware than the software that you curently have installed. and then tells me to keep the current software. My sound Icon does not show up when I go to the settings.... I can't play diablo 2 on this no idea why... But my screen is choppy when I scroll through internet sites and it did not do that before. I have a 400mbs connection .... here is my computer information. :Compaq Presario R3000 Intel pent4  2.80ghz    2.80ghz       1.12GB ram and im running on windows xp2 professional.

  • Does Compaq Presario R3000 (AMD) Notebook PC support WPA2-PSK?

    Hello all,
    I know this is an old laptop(Compaq Presario R3000 (AMD) Notebook PC).
    Recently, I upgraded my network system and start to use WPA2-PSK.
    I have installed the patch from MS http://www.microsoft.com/en-us/download/details.aspx?id=1974
    However, the droplist of my network wireless setting still doesn't show the option
    for wpa2 but wpa.
    Can someone tell me the reason? Is it beause that my network adapter doesn't support
    the new standard wpa2?
    Thank you
    This question was solved.
    View Solution.

    I believe this driver will take care of the issue...
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&sp...
    Again, in addition to the above driver you also must be running XP SP3 in order to get WPA2 support if that microsoft SP2 WPA2 patch doesn't work.

  • Does Arch Linux work with the Compaq Presario R3000 series?

    Well i have a Compaq Presario R3000 and i've been wanting to put linux on it. Does anyone have this laptop with arch on it? If so do all the fans work and everything?
    thanks

    I have just installed arch on my laptop linux works great and all the fans wook  :twisted:  thats the good thing. The bad thing is whenever i do startx i get a blank screen  :cry:  and my comp freezes (im using the newest nvidia drivers and xorg) (i tryed runnin gnome and enlightenment) I remember having this problem before but cant remember what i did  Does anyone have anyclue why its freezen? Maybe i forgot something in the kernel(2.6.10)?

  • Link for how to replace the clock battery on Compaq Presario 1247 laptop

    Once upon a time I had a link to a manual that provided instructions on how to get to the motherboard for the purpose of replacing the clock battery on an old Compaq Presario 1247 laptop. Can anyone provide that link?
    This question was solved.
    View Solution.

    Hi,
    This should be the Maintenance & Service Guide you're looking for.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I need to replace the cmos battery for Compaq nc 6320

    The computer I'm working on will not recognize the HD. I've pulled the drive and it works showing the entire drive.
    I think that I think that the MBR is corrupted. I've tryed to us the XP professional CD but can't get past the need for a password. I thought I could remove the Cmos battery to bypass the lock that may be in the Cmos.
    This question was solved.
    View Solution.

    Danny.
    The BIOS/RTC battery is located under the spacebar.
    Remove AC, main battery then keyboard.
    Disconnect battery cable.
    Your manual here.
    http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.proc...
    Just a note.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Battery check compaq presario cq56

    is safe to run a laptop just withe a/c after the battery is charged, and if is posible repair the Hp assistant aplication is not working properly?? are any others programs to check is the battery status   Gracias

    Hello,
    I see that you're having an issue with HPSA not working properly. Now, I'm not aware of any other 3rd party program that gives you the ability to check your battery’s performance. 
    Now, to resolve the HPSA issue you have going on. You will need to uninstall the program through the Add/Remove folder in the control panel. After that, you will need to install this version of HPSA. Once you install that you should be able to use the battery check within the program. 
    If the issue still persists please let me know. If you have any more questions let me know.
    THX

  • Compaq presario R3000 cd/dvd player

    I just received a new program consisting of 4 CD's.  I can load the first one with no problem but the other 3 are not recognized.  Therefore I cannot use the program. I have had this problem before and wonder if there is anything that I can do to fix it.

    Hi,
    Please try this solution first:
      http://support.microsoft.com/mats/cd_dvd_drive_pro​blems/en-us
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Battery replacement of Compaq Presario C700

    I want to replace the battery of Compaq Presario C700 laptop. I have purchased in 2008 and now its not giving batter backup. Can anybody tell me how i proceed. I am living in delhi or HP has any offer to replace old lappy  by new one  with some bucks.
    Serial no- CND819D48C
    Product no- FF371PA#ACJ
    Jyoti
    [email protected]

    HP would be happy to sell you a new laptop. But the C700 really has no trade-in value. 
    Here is a replacement battery on eBay:
    http://www.ebay.in/itm/BUY-ONILINE-LAPTOP-BATTERY-FOR-HP-COMPAQ-C700-SERIES-10-8V-4400MAH-NEW-/35098...
    This is not a genuine HP battery but would be a good option for an older laptop. 

  • COMPAQ Presario

    Sir/Madam,
    where do i find e-mail ID of
    - hp,
    - hp India, and 
    - hp forums.
    Please reply with e-mail IDs.
    Thanking you and waiting for your reply..
    so that i can request a guidence for new RAM;
    as i wish to purchase a 2GB RAM urgently
    for my COMPAQ Presario R3000 (512MB RAM).

    Respected Mr Russel-E,
    no website contain clearly their e-mail ID..
    within www.hp.com and/or www.hp.com(India) and/or [email protected]
    and
    sending mail inquiry/request through pop-up in "contact" on www.hp.com ..
    is useless as i can not keep any record/proof at my end and they do not reply. :-(
    As i e-mailed a request to hp.com -- indian site and there is "0" response.
    you also gave me the link that again lead me up to pop-up in "contact" on www.hp.com only..
    which is NON RESPONSIVE.
    Afterall i am again without the conclusion that..
    * is it possible to increase RAM with 2GB in my ( COMPAQ Presario R3000 - 512MB RAM ) ?
    * what is the product/model number & cost of 2GB RAM to fit in R3000 ?
    * is it available at hp India, Ahmedabad branch ?
    If possible please reply n guide for these infos.
    Thanking you..
       मुस्कुराते रहो ...  Keep Smiling...  
    wit best regards from Upendra Rawal, India.

  • Presario R3000 volume keys stopped working

    I am running Arch very well on my Compaq Presario R3000, and so far I have only had one hiccup.
    My volume keys were working properly at first using the Compaq Presario keyboard map in gnome, and it would act upon the proper ALSA maste volume and show the corresponding onscreen display of my actions. Today, my keys aren't working on the mixer at all, but if I am running Mplayer, they work on the volume there.
    What would cause this odd behavior.....any ideas?
    Thanks.

    ok...update time.....my buttons spontainously started working again tonight. I am not sure what happened because I enabled the testing repo, did an Syu, and now here we are.

  • The battery of my hp compaq presario needs to be replace,where can i buy it and how much?thanks,..

    the battery of my hp compaq presario needs to be replace,where can i buy it and how much?thanks,..

    Hi,
    There are many Compad Presario models/laptops out there, you need to buy the right one for your machine. Here is a place, you can buy from them or using as a guide (cost) to buy elsewhere:
      http://www.hp-laptop-batteries.com.au/compaq-laptop-battery.htm
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Compaq Presario S4500UK Won't start after wall-socke​t disconnect​. Is this a CMOS battery issue?

    Recent software rebuild with additional internal HDD (March 2011) as dual-boot WinXP/Linux setup worked fine.  CD/DVD RW drive started to give cyclic redundancy check errors so replaced drive a week ago.  All still OK.  Change of electricity provided and increased energy usage conciousness switched off machine at the wall overnight after normal shutdown.  Machine would not restart in the morning.  Did not load BIOS; all lights came on briefly and then went dead after 3-4 seconds with power light still on.  One can get a similar effect by plugging the keyboard into the PS2 Mouse Socket as I did once!
    After 20 minutes or so trying all sorts of things managed to boot from Linux CD.  Shut down/restarted and all's fine provided I don't switch off at the wall.  Also seems to be OK after brief 5-10 second power off but problem persists with any long disconnection.  It seems that after 10-15 minutes power-on and 2-3 attempts at restarting, the BIOS comes up and all's well, although it has stopped in the middle of a Windows or Linux start-up on one or two occasions.
    Am I right in thinking the problem might be the result of a dead CMOS battery?  The reason I ask is that the clock seems to keep time OK and there are no apparent issues with BIOS once it loads.
    Any help/guidance would be much appreciated.  Further config info below.
    Compaq Presario S4500UK Bios v3.03 dual boot WinXP Pro SP3 / Linux Ubuntu 10.04 Lucid (2.6.32-33)
    HDD 120GB (original Seagate Barracuda 7200) Master Boot Record, Partition Table, WinXP, Linux, Swapfile etc
               500GB Western Digital Caviar Blue (encrypted)
    CD/DVD ROM (original JLMS XJ-HD166S)
               Recently installed HL-DT-ST DVD-RAM GH22NP21 replacing NEC ND-1100A
    ++++++++++++++++++++++++++++++++++++++++++++++++++​+++++++++++++++++++++++++++++++++++++++++
    I didn't get any replies so I went ahead with replacing the CMOS battery but that hasn't helped.  The problem is also evident if I power down and leave it for about an hour or more before trying to restart even if I don't disconnect the wall socket.  It seems to take about 15-20 goes at restarting before it fires up.  I would be really grateful for any clues as to what's wrong.
    Tks
    jg1
    This question was solved.
    View Solution.

    Still no replies to my increasingly ticklish problem so I'll give you the benefit of further investigations in case it prompts some words of wisdom...
    So it's not the CMOS battery.  Other symptoms emerge...
    1.    "Crashes" are absolute, immediate and without warning - just like someone turned the lights out.
    2.    "Crashes" also happen occasionally when firing up Truecrypt using the "Auto-Mount Devices" option but thus far have not occured when selecting the required device first.
    3.    The problem appears to be getting worse in that it takes longer to persuade the machine to start from cold.
    4.    If I remove one of the HDDs the machine boots up fine - or it has so far (about 10 times after power disconnect for 1hr or more).
    This makes me start to suspect the PSU.  I've done the diagnostic checks on the HP website
    http://h20000.www2.hp.com/bizsupport/TechSupport/D​ocument.jsp?lang=en&cc=us&taskId=110&prodSeriesId=​...
    and it appears that the Power Supply is working just fine but if I remove a device not required at boot-up the thing will fire up first time.  My analysis seems to suggest that the existing PSU (Lite-On PS-5251-08HP) rated at 250W is working at near capacity but it cannot service the peak loads when the HDDs spin up during boot-up.
    Can anyone confirm this, pls?
    If this is the case, can anyone suggest a suitable upgrade?  There's loads of product out there with prices ranging from £15 to £150 but as I'm a bit of a numpty and I don't seem to be able to narrow the choice down sensibly.  I've tried going through the info on the HP website and various tech forums/fora without getting very far.  It would be brill if there's someone out there that knows the product and could share their knowledge.
    Tks in anticipation!
    jg1

Maybe you are looking for

  • HP Printer Issue

    We have a problem printing on an HP PhotoSmart 7550 printer connected via USB to a Windows XP/Media Center server connected wirelessly to our network.  I installed Network Magic to try and assist with this issue and have no luck on fixing.  Specifics

  • I tried to paste text from another site into my Firebox document, but it says "Firefox does not support Copy & Paste". How do I enable clipboard? I never had problems like this on Firefox before...why?

    I tried to paste text I copied from another site into my Notepad++ (as I've always done in the past with no problem). But today for the 1st time, I got a message when I tried to paste the text "Firefox does not support Copy & Paste". What? What happe

  • Assign Partner fucntion by Coding in CfC

    Hi All, I have assigned a partner function to my opportunity. Path : FineTuning->Opportunities->Maintain Involved Parties. I have maintained For example : "Lawyer". Now when I create an account ( I have created a new QC ) and when I click on opportun

  • Loading dbwsclient.jar

    Having problems while loading dbwsclient.jar. loadjava -u user/password@dev -r -v -f -noverify -genmissing C:\temp\webservices2\sqlj\lib\dbwsclient.jar This user has all JAVA* roles and create any proc, create any table. Get following type of message

  • AJAX Tab question

    Hi All, I have CF 8 Standard and have used the Ajax tabs (I suppose these are from Yahoo). I have been able to properly display tabs on my CFM page and the users are able to navigate using these tabs. Is there a way for me to know what tab the user c