Where is connect button on wireless elite v2 keyboard?

having awful time pairing, none of the documentation shows where the "connect button" is...??

Hi,
it should be besidse the battery or could you mind to let me know the HP product number so that i can check the real product for you?
thank you

Similar Messages

HP Link-5 not pairing a Wireless Elite V2 keyboard and a Wireless 3-button Optical Mouse

I recently purchased a Wireless Classic Desktop Keyboard and Mouse. However, I didn't like the keyboard and then purchased a Wireless Elite v2 keyboard which is much better. However, when I plugged in the HP Link-5 receiver, the keyboard worked fine but the mouse isn't getting paired up. I followed the instructions about placing the mouse near the receiver and pressing the Connect button but still the mouse doesn't respond. I need to plug in the receiver that came with the original keyboard and mouse in order for the mouse to work. However, this uses up another USB port and defeats the purpose of the HP Link-5. Any suggestions?

I have asked a number of times for information on these devices, but HP has not answered me. Can be very frustrating and I hope if enough people pressure them they will at least answer. We can decide if the answer is any good or not then. There is absolutely no documentation that I can find, especially with the Link-5 Bluetooth technology. For instance, the mouse has specific specs about how fast the resonse is to certain movments. I have asked but nobody seems to know, find out or care. Which it is, I wonder.
If they are NOT Link-5 compatable (whatever that means exactly) it apparently won't sync. It would be nice if they would tell us.... This also may help in the next decision to purchase HP equipment, if this is the kind of simple support they refuse or simply won't give out.
Jack

Link-5 wireless elite v2 keyboard with really bad reception

Hi. I bought a Wireless Elite v2 keyboard a week ago, and it has really bad reception. It should have a maximum range of about 10mts, but I can't use it more than 10cm away from the link-5 dongle.
I have tried everything listed on this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006821&tmp_task=solveCategory&cc=us&dlc=en&lc...
But nothing works. New batteries, no wireless devices near, no things between the receptor and the keyboard, I even tried using it on different houses just to be sure there wasn't anything making interference at home.
Is the keyboard defective?
I bought it at Boston, but now I'm on Argentina, I can't just go and get/try a new one...

Hello,
Well, sorry to hear that all the tests failed to show any improvement on the situation.
I would suggest that you try to call HP and to explain the situation, see if they can try to help you to check the issue and maybe exchange the keyboard.
0-800-555-5000 Capital Federal: 54-11-4708-1600 or via e-mail at the link below.
https://h10025.www1.hp.com/ewfrf/wc/email?product=4276234&lc=es&cc=ar&dlc=es
If you can't get any help from this 2 resources, let me know.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Touchsmart keyboard and mouse - HP Wireless Elite Desktop Keyboard and Mouse?

Hi,
Is the keyboard that comes with the Touchsmart desktop the HP Wireless Elite Desktop Keyboard and Mouse?
Thanks!

My keyboard model number is RK713A
Part number is 492904-001
That, plus a serial number is all the info provided.
Nothing designating Elite.
What was I thinking when I bought an HP ?
Oh yea, I wasn't !
IQ504 & IQ506

Where can I find a HP Wireless Elite keyboard V2 manual?

Where can I find a manual for my HP Wireless Elite V2 Keyboard? I have acidentally thrown it away with the box. And I regret that. I looked on the product page to look for it and it said that I had to download Adobe Reader. So I did and it still said that?! I just need the manual, I don't want to buy another one just to get the manual.
Thank you!
From,
Seth H.

Hi,
You can find manuals, guides ... on the following link:
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/manualsResults?sp4ts.oid=3707817&ac.admitted=1...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can a link 5 usb key paired with hp's wireless elite keyboard?

Hi, I have a link 5 wireless mouse and a old hp's wireless elite keyboard. I don't know if they both use bluetooth or one is bluetootha and the other 2.4GHz or not. But can a link 5 usb key paired with a hp's version 1 wireless keyboard? If not, how can I get a wireless usb key for my hp wireless eilte keyboard?

Hello,
A Link 5 USB mouse can be used with some devices and HP has listed them at the following link:
HP Link-5technology liberates USB ports
HP also introduced new PCaccessories with HP’s exclusive Link-5 technology. Link-5 allows users to connect up to fiveHP-compatible PC accessories with one receiver, freeing up valuableUSB ports.
There are no drivers orsoftware to install. Users simply press the ”Connect” button on aLink-5 device to pair it with their PC. The wireless receiver then“remembers” all paired devices, making Link-5 accessories ideal forthose using a PC in multiple settings such as the home, office orother mobile locations.
Link-5 delivers reliableconnectivity using 2.4-GHz wireless technology and has anintelligent sleep mode to ensure the longest possible battery life.The latest Link-5 accessories lineup includes:
HP Wireless Mini Keyboard: Just the right mobile companion fora tablet or entertainment PC, this full-featured keyboard islightweight and ultra-small in size.
HP Wireless Ultrathin Wireless Keyboard: Offering a stylishlook and feel, this keyboard is durable, full-featured and a greatvalue.
HP Wireless Elite v2 Keyboard: Featuring a sleek, ultra-slimdesign, this keyboard offers superb performance and comfort.
HP Wireless Optical Comfort Mouse: Offering a comfortable,secure grip for use in the right or left hand, this mouse featuresan optical sensor with adjustable sensitivity that works on mostsurfaces.
HP Wireless Laser Comfort Mouse: Using a laser sensor withadjustable sensitivity, this mouse delivers optimal performance andworks on most surfaces.
HP Wireless Mobile Mouse: Designed for users who are on the go,this mouse delivers reliable wireless connectivity at a greatvalue.
It is only mention v2 not v1, so not sure if it will work. You should not be able to buy a key, because each device is sold with their specific usb receiver, so the answer is, you cannot get one, except if you buy a new part.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

TS3048 I have two iMacs 6 feet apart. One has no problem connecting to the wireless mouse and wireless keyboard. The other can"t seem to find either device.

I have two Imacs 6 feet apart. One has no problem connecting to the wireless mouse and keyboard. The other indicates it can"t find it"s wireless mouse and keyboard.

Hello:
A Bluetooth device may only be connected to one thing at a time.
Barry

As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons.

As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons. when it opened all apps music and pics where not there. why? then i enterted photos and the loading logo appeared then the standyby appeared and i entered my password and everything in my iphone was there but thing were scattered and apps wheren't in folders everything was messed up but no photos or music AND IT SAYS UP IN THE MIDDLE OF THE SCREEN EXIT SAFE MODE. so i restarted it again and it opened and nothing was there and again i entered photos and the samething happen again. why did this happen? and can i get my data back? and in the usage it says that these thing are there but not showing.

stevejobsfan0123 wrote:
The Find my iPhone service option is given to you when you first set up the device. If you just reset it, you may have been given that option. So, in other words, the service may have been enabled even if you didn't realize it. You can then go to www.icloud.com and click on Find my iPhone, and have it play a sound. Or, you can use the Find my iPhone app on your mom's iPhone, but the service would still need to be turned on on your iPod.
Unlike Compukid said, Apple will not assist in locating a lost device without the Find my iPhone service.
I found that out 2 years ago, it's just that I thought Apple might have changed that.

I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

Here's my dilemma...my iPhone will connect to my wireless router in the room where the router is located but won't outside if the room ie my living room for example...any suggestions??

Here's my dilemma...my iPhone 4 will connect to the wireless router as long as I am in the room where the router is located but won't if I'm in a different room...any suggestions?

iPhone 4 does not support 5 GHz
In that case I would manually change the channel the 2.4 GHz is broadcasting.
MacBook Pro, Mac OS X (10.8.2) 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop8.0 iPhone5_iOS6.1

Where is the spotify CONNECT button after 3.3.0 update?

Hey, I only want to know where the spotify connect button went after the 3.3.0.1640 update for iOS on my iPhone. That's all I wanna know and I can't find it anywhere...I did follow the instructions here: https://support.spotify.com/us/learn-more/guides/#!/article/spotify-connectTapped the song bar at the bottom but then it doesn't say "spotify connect available" below the play button. Couldn't find it in options either... I'm trying to connect my phone with my PS4. Please help? :)

OK, so the reason why the connect button won't show up on Spotify 3.3.0 for iOS is because it's an invitation-only feature in this update.To request an invitation for Spotify Connect, you can follow this link and fill out the short form.

Internet Connection - Your Apple wireless device does not have a valid IP.

I just bought an Apple TimeCapsule and set it up normally, following instructions to my Arris cable network on the Videotron provider here in Quebec, Canada. The TimeCapsule did appear as a wireless device on my MacBook Pro (after updating the AirPort software from the provided CD - as was instructed). I went through the whole installation process to obtain at the end this error:
Internet Connection - Your Apple wireless device does not have a valid IP.
The only provided instructions were to check the cable and then contact your Internet provider. Well it seems clear to me that if I contact my provider and say that the internet connection works fine directly on my computer, also fine through my "normal" wireless router but not with my new TimeCapsule, I won't get much of a response.
After a lot of research, a friend indicated the solution in my case.
You have to really reset the cable modem to convince it to start giving out IPs again.
To do this:
1. Unplug your TimeCapsule (possibly you might have to reset to factory defaults - see the documentation)
2. Unplug your cable modem
3. Reset your cable modem by pressing the reset button with a pen (or something) for several seconds.
4. Plug your cable modem back in and let it reboot/restart - until the lights are back on.
5. Plug in your TimeCapsule
Everything should now work and you can restart your AirPort set-up on your Mac.
Good luck!

My ISP is AOL. The service is DSL via a broadband modem. Somewhere during the setup process there appears to be a communicatiosn issue between the Airport Extreme Base Station and the DSL modem. When I hook the DSL modem directly to my iMac I can connect to the internet without any issues.
I tried the factory reset and the DSL modem reboot process described in other posts and seemed very close to success...until the internet setup step. That is where this issue first presented itself.

HP Wireless Elite keyboards (2) not communicating at all.

My HP wireless elite keyboard (no mouse) worked with my old laptop and another computer, plug and play, even if I didn't install any software.   However, it won't connect with my new ones.    Both the laptop and the other desktop it worked on have since crashed. Today I tried 2 HP Wireless Elite keyboards on a different laptop and 2 new desktop computers with no success.
Plugging in the USB hub, the computer says it loads the driver fine, but no output from the keyboards at all. I've tried:
Pressing and holding the connect button on the keyboards multiple times.
I loaded the software and the icon sees that the batteries are full.
I changed the batteries, anyway, to no avail.
Checked the control panel. The keyboard is shown in devices and printers and the status shows it's working fine.
I tried to the update the driver through Device Properties but it says the latest one is already installed.
I went to the HP site and downloaded new software, anyway, but no luck.
I've tried the above on 3 different computers. Two have Windows 7 64 bit and one has Windows XP 64 bit. Same results. I also have another HP Wireless Elite keyboard bought a few years ago but never opened until today.   It’s showing the exact same symptoms.
I notice that the blue light on the USB hub only stays on for a few seconds when plugged in (both of them). It doesn't turn on when the connect button is pressed nor when any key is pressed.    I thought this light used to flash all the time, or at least when I was typing, though it was plugged into the back of the computer so I could be wrong about exactly when it came on. I just remember the blinking used to be distracting at night.
I hate to have to buy new keyboards when I have two of my favorites right here. They weren’t cheap, either.
This question was solved.
View Solution.

I was finally able to get the keyboards to work. Turns out it was the TYPE of battery used. Duracell copper top, brand new Energizer Ultimate Lithium ($$), and Energizer Industrial did NOT work. I used the batteries that came with the new keyboard and it works. They just say Energizer on them, no special titles or adjectives afterward.
That is incredibly picky.

Where can I find the wireless switch on a hp touchsmart 610-1230?

I have just purchased a new HP TouchSmart 610-1230 and when connecting to the wireless network it informs me that the wireless is turned off. It says that I need to find a button to turn it on but I can't find this button anywhere on the computer. Does anyway know where I can find it?

Hi,
Is it a dv6-1245dx ? The switch is on the top right corner. Page #11 of the following manual shows you where:
http://h10032.www1.hp.com/ctg/Manual/c01758220.pdf
More manuals are in the following link:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&product=3979380
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My HP OfficeJet Pro 8600 won't connect to my wireless router

This is bizarre. I have had my HP OfficeJet Pro 8600 for about 6 months. It has generally worked fine, and we have used it wirelessly only. But now it refuses to connect to the router. It can FIND the router, and it can find other networks in the area, but it won't connect to the router. I ran the Wireless Network Test, and the results say:
Wireless On - Pass // Wireless Working - Pass //
Network Name (SSID) found - Pass // Wireless Networks Detected - 9
Printer Settings Consistent with Wireless Router Settings - Pass / No Filtering - FAIL //
So it recommends solution as follows: "1 If MAC Address filtering is enabled, and you would like to keep it enabled, you must add the Mac address of your printer to the list of permitted devices for your router before continuing."
Except, guess what, I don't have MAC Address filtering enabled. I wouldn't know how to do that, much less check for it.
Also, before today, this was never a problem. HELP!
Thanks....
If you are interested, here's more detail and background.
Before today, the only problem we have had is that frequently our Apple laptop (OS X 10.6) has trouble connecting to the printer. This has been odd because the printer is connected to the network, and so is the laptop, but the laptop can't find the printer - it thinks the printer is "offline" (even though it's not). Usually, if I wait a while, it will find the printer, and it will resolve itself work fine. If not, we sometimes have found that it can fix itself if you restart the laptop -- restarting the printer does not make a difference. In fact, I did exactly that today, and it resolved itself. And I printed. Fine, right?
But then I wanted to do more printing, and the problem of the laptop not finding the printer came up again, so I decided to really "get to the bottom of this." I don't remember exactly what I did, but somehow I was persuaded by the online help, that the correct solution would be to go into my System Preferences / Print and Fax, and click on the "-", which de-installs the printer, with the idea of re-installing the printer. But then when I tried to re-install the printer, it could not find the printer. Ugh! Wierdly, it found an 8600 Scanner, but not an 8600 printers. After installing and de-installing the 8600 scanner a few times, I eventually deinstalled everything, and I decided to start from scratch. I got my HP disk, and installed all the software again from the beginning (even though it was already there), and then it looked for my printer, but couldn't find it. So then I got a USB cord, and plugged that in.
So, now I have a situation where I do have a working printer via the USB cord, but no wireless connection at all. In particular, since the Office Jet Pro 8600 won't connect to the router, I don't know what else to do. My Apple MacBook pro is 2 feet away from the printer, and it is connected to the router just fine (as is my blackberry), and I have never before had a problem connecting to the wireless router by the printer.
Any suggestions?

There are two things that can trip the mac filtering test to fail: actual MAC address filtering setup (sounds like this is not the case) and using wireless channel 6 or automatic for wireless channel in the wireless network settings (in the router). Since it does show failed for MAC filtering and you do not use this option, try changing the wireless channel in the router to 1 or 11. Those two channels provide the best compatibility with printers due to less interference. Almost everything defaults to auto or 6 for the channel and this causes a lot of interference. This change should not affect anything at all. To do this, you may need to contact the router manufacturer as the process differs from router to router.
What brand and model is the router?
Has anything in the network settings changed at all?
What version is the Mac OS X? There may be additional steps to take as it sounds like there are two separate issues involved and this could be revisited later.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Where is connect button on wireless elite v2 keyboard?

Similar Messages

Maybe you are looking for