Where is data stored for the podcast?

I created a Podcast last week on my iBook G4. On Friday my MacBook Pro was delivered.
Now I want to find it in all of the files I transferred so I can work on it further. It was uploaded to web.mac.com, so I can see it there. But I can't find the file in the new iWeb that was pre-installed on the MacBook, and have no idea how to locate the file to open it...
Since it was kind of a practice run, I didn't pay a lot of attention to what it was named, but it was good, and well worth continuing to work on!
So - can anyone tell me the default location where iWeb saves files? I do have the entire iBook backed up on the external hard drive, too.
Thanks!

See if this helps:
http://homepage.mac.com/thgewecke/iwebdata.html

Similar Messages

Error message PG009 : no data stored for the period

During upgrade testing from 4.7 to ECC6 noticing an error message PG009 with a suggested solution "In table T582A maintain the indicators 'Choose with start', 'Choose with end', 'Choose without date' for each infotype"
I am able to see recotds in 4.7, but however unable to view anything in ECC6. The message I get is No data stored for the time selected.

We have the same problem - during upgrade phase. Any suggestions?

Where is the data stored for the Contacts application in OS X 10.10?

My client uses Backblaze online backup, and recently needed to retrieve his contacts. Is the data stored in the app itself, or somewhere else? Backblaze doesn't back up applications by default. Is there a way to instruct Backblaze to back up the Contacts application?

Thanks, lllaass.

I had backed up my IPhone 4s on iCloud on Jan 19. I am now trying to do another back up but it says the time required is 7 hours. It appears to long a time for 1GB of data stored on the iCloud. Can someone help me please?

I had backed up my IPhone 4s on iCloud on Jan 19. I am now trying to do another back up but it says the time required is 7 hours. It appears to long a time for 1GB of data stored on the iCloud. Can someone help me please?

To be honest, that sounds about right.
For example on my 8Mbps (megbits) down service I get around 0.4Mbps upload. That is the equivalent of (very approximately) 3Mb (megabytes) per minute or 180Mb per hour. Over 7 hours that would be just over 1Gb.
Obviously, it all depends on your connection speed, but that is certainly what I would expect, and that is why I use my computer for backing up, not iCloud. So much quicker.

Podcasts app asks for cellular data even if the podcast is already downloaded

When playing a podcast without a wifi access, the Podcasts app asks for celluar data access. This is even for podcasts that have already been downloaded and should not require streaming.If I do not provide cellular data access, then the podcast cannot be played.
Is there a way to play downloaded podcasts without cellular data?
Thanks in advance.

I have a similar problem on my iPhone 5, iOS 7.0.4.

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is.

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is to do so. Putting my Mac Pro onto icloud synching contacts resulted in duplicate and triplicates of the same cards. I have a few THOUSAND contacts and the last time this happened was on mobile me. that had a function where you could replace info on the mobile me server with info on the computer. I see no way to do that on the new cloud.

In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
For TM restores, see Pondini's TM FAQs for starters, since I don't use TM.

How to get values/data stored in the database into a list-item.

how to get values/data stored in the database into a list-item.
i tried to make a list item without any values assigned to it...but i got the below error.
FRM-30191: No list items defined for required poplist.
or
FRM-32082: Invalid value for given item type.
List EMPNO
Item: EMPNO
Block: EMP
Form: MODULE5
FRM-30085: Unable to adjust form for output.
then according to some docs, i tried the the following for the trigger
when-new-form-instance
declare
     rg_name varchar2(40) := 'emp_rec';
     status number;
     groupid recordgroup;
     it_id item;
begin
     it_id := Find_Item('empno');
     groupid := create_group_from_query(rg_name, 'select empno from emp');
     status := populate_group(groupid);
     populate_list(it_id, groupid);
end;
but yet didnt work... :(
so how the heck do i get values fetched from the database table into the list item?

for list items you need to values in the record group, one is the shown value and one is the returned value.
Check out the online help for the populate_list built-in.
You'll need something like select ename,ename from emp as the record group query.

How do I keep a rented movie locally stored for the authorised period?

Okay, so just bought an Apple TV for the first time, so this is all new to me! So far, most of it makes sense, but I'm wondering about how the unit manages downloaded content.
It seems to me that you rent a movie, Apple TV starts downloading it and makes it available to play. I live in Australia, so I have 30 days to start watching it, and once I've started, I have 48hrs to finish watching it.
So, I downloaded our first movie the other night. We watched half of it before sending the kids to bed (school night) and watching the rest of it ourselves. The next day we went to start watching it again, but from about halfway through so the kids could see the end of it. All was fine, except I noticed that Apple TV was downloading it again.
This puzzled me - that is, it didn't seem to make sense - I assumed the onboard 8GB would be used to store it for 48 hours from when we started playing it? So, is there some way to achieve this? For eg, if I set Apple TV to never sleep prior to renting a movie, then rent a movie, will it keep it stored for the authorised period because it hasn't gone to sleep?
If not, is there some way to achieve this outcome? I just don't see the point of using up a data allowance by downloading the exact same thing - even if I change my settings to standard definition it's still a waste of data.
I did do a few online searches of various FAQs, but couldn't find the answer to this question, so hopefully someone can shed some light on this for me or refer me to a good source of info.
Thanks!

Joe Felice wrote:
Thanks Brian. I realise the OS controls memory management, but was wondering what "rules" it used to manage it and whether any of the user settings (such as sleep) would affect it?
So, if there's nothing the user can do to impact this, would it make more "sense" to rent the movie on iTunes on your Mac and then watch it on the Apple TV? Would that negate the need to re-download the movie each time you watched it? And, if so, what are the disadvantages of this approach?
Or should I just forget the whole thing, increase my data allowance, and not worry about it?
Still, it'd be nice not to have to redownload it if that was inconvenient for some reason.
Simple things like watching a movie preview or playing content from local iTunes will flush the buffered rental from ATV 2/3 - they only have 8GB of solid state storage and if you rent more than 1 HD movie (4GB or so) they will be competing for download/buffering space.
The only disadvanatges of renting in iTunes are:
- need for itunes to be running to play
- some titles available in HD on ATV are only in SD via iTunes!
AC

Looking to get a data plan for the sole purpose of playing online video games

Hi everyone,
I live in the mountains of Pine Valley, CA and the seclusion is becoming intolerable. I'm looking to get a data plan with Verizon to play online video games, namely Diablo 3 or failing that due to latency, then Civilization 5. Can anyone give me pointers on if this would work and what plan I could get? Currently, I have a plan with Boost Mobile which uses Sprint cell phone towers. I tested my internet connection with speedtest.net and received a ping as low as 140 and as high as 1000, but I'm hoping the 1000 is just due to reception issues that can be fixed with a better antenna. The 140 ping is a little high too but I'm hoping this will be better on the Verizon network since I think their cellphone towers are closer. The closest landmark to me is the Golden Acorn Casino at 1800 Golden Acorn Way Campo, CA 91906. If anyone could tell me the distance from Verizon's cell tower to the casino and Sprint's and could estimate a ping value based on that, I would really appreciate it.
I like Verizon's data plan for 10gb but I'm confused on device connectivity. Is this the data plan plus whatever router device I hook it up to? I would also need some sort of antenna and a router, wireless or wired. Can anyone give me pointers on how to find these? An estimation on Ping and bandwith speed and also on peak hours in my area would be nice too. Thanks to anyone that can help me with this! Oh, and while I don't think my area has coverage for 4g, though I'm pretty sure there is 3g, would I possibly get 4g if I had a strong enough antenna?

Homefusion comes with antenna that is mounted OUTSIDE of your dwelling. That why they send someone out to install it. It also comes with the router. You're thinking of Share Everything data only plans. Where you pay $20 for the mi-fi and then pay extra on the data pending how much you want. Share Everything with a mi-fi and 10 GB would be $80 a month when you can get Homefusion for $60 for the same 10 GB. An considering the antenna is more power and outside you're a lot more likely to get reception with Homefusion. In either case it should be noted you'll need to pass a credit check and sign a two year contract.

Cannot read the next data row for the data set

Hi,
My report runs fine when I view in VS, data shows fine when I run the query in the data window, but when I publish it to the server, I get the above error. I am running SQL server 2005 RTM and I have re-deployed the entire solution.
Any ideas?

Hi All,
Upon investigation found that there was an issue with converting varchar value to datatime datatype in Stored Procedure and that is why report was throwing error.
I ran same report in BIDS and got clear error message
An error has occurred during report processing. (rsProcessingAborted)
Cannot read the next data row for the dataset xxx. (rsErrorReadingNextDataRow)
The conversion of a varchar datatype to a datetime datatype resulted in an out-of-range value
Once I corrected this, It is working fine.
Thanks Shiven:) If Answer is Helpful, Please Vote

Data Sheet for the TNT4882

Where can I find a "real" data sheet for the TNT4882 that shows voltage levels, currents, setup times, etc.

The appropriate link is available from:
http://www.ni.com/support/gpib/reg_prog.htm

How can I see website data from itouch 4th generation? My 8 yr old may have been on inappropriate sites and I need to see the data from website data stored on the itouch.

How can I see website data from itouch 4th generation? My 8 yr old may have been on inappropriate sites and I need to see the data from website data stored on the itouch.

There is no way to see where he has been.
Go into Settings > General > Restrictions > Safari and turn it off. Then add the MacGruff browser from the app store. After that go back to Restrictions and turn off the ability to add apps.

Where planning data stored physically?

Where planning data stored physically?
What are planning required dimensions?

Hi,
Planning Data is stored in essbase.When the end users enter data in the planning application ,Essbase stores the data

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Where is data stored for the podcast?

Similar Messages

Maybe you are looking for