Where is font-setting for note in iOS7?

Hi,
After update to iOS7, the beautiful font set for Notes is not available anymore. Not even available in settings for Notes. Is there another way to get those fonts back?
Thanks and best regards

Here is the feedback I sent Apple with the link provided by "Level 3 (630 points):
As you have "allowed" iOS 7 users to be able to use their previous ringtones under the "classic" setting, PLEASE also "allow" iOS 7 users to be able to choose the "original" more sophisticated and aesthetically pleasing look of the previous iOS 6 and before.  This would greatly, if not entirely, eliminate negative feedback of the iOS 7 "Dinky-Dob" look.

Similar Messages

  • My iPhone 4s no longer has sound for any of the applications but it does have sound for phone functions.  Where is the setting for app sound?  I have gone to the multitask screen and the volume bar is empty.

    I recently found my phone outside in light rain (it had been there about 20 minutes).  It had some glitches at first, however after letting it rest overnight it seemed to mostly recover.  The one problem I am having is that I no longer have sound for any of my applications.  I do have sound for phone fuctions, and I am able to use the speaker for phone functions. 
    When I am in my applications, including music/videos, the only way I can hear is if I use my earbuds.  I am able to make a video and it will record sound just fine.
    When I go to the multitask screen, the volume bar is empty and I cannot adjust it using the side buttons (even though in settings I have that feature activated). I completely reset all of my settings tonight and that did not make a difference. 
    Is there a setting I am missing, or am I just SOL?  I am trying to avoid having to get a whole new phone but it is very frustrating to not have sound with my applications.

    Hi Baileyfour,
    Welcome to the Support Communities!
    The articles below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    There are two places where vibrations can be set.
    One is the Settings > Sounds
    The other area is Settings > Notifications
    If you have an app set to Alert, it may have a vibration set for it.
    iOS: Understanding Notifications
    http://support.apple.com/kb/ht3576
    Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    I hope this information helps ....
    Have a great day!
    - Judy

  • I want my home page to open every time I open a new tab. Where is the setting for that?

    When I open a new tab it is always blank. I want it to automatically open to my home page every time I open a new tab.
    I thought I found a setting for this, but I can not find it now.

    There is no setting for this, but you can do that by using an add-on such as:
    * NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
    * New Tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage
    Another way of opening the home page in a new tab is to middle click on the home button in the navigation toolbar.

  • Adjust font size for notes?

    is it possible to adjust the font size for the .txt file to be read in the 'notes' folder in 'my computer'. i have synced it to my ipod but becuase of is size and the way the info is portrayed the width is too narrow on ipod thus getting a 'spill' onto the next line. is there anyway to save it as it is in its original .txt file. thank you
    Alan

    In the text note include some html code. html (hypertext markup language) is what is used to display this web page.
    You can Google "html font size" to learn more about it.
    Create a text note.
    The very first line of the text note should be
    <font size =-1>
    This will make the font 1 size smaller (it's a minus 1). Make it a + (plus) sign to make it larger.
    Add the rest of your note.
    The last line of your text note should be
    </font>
    to return everything to normal.

  • Where is the wait for note mode in logicstudio

    Can anyone please tell me where the wait for note mode is in logicstudio, or how to enable it "ie hit record button, and it waits for me to hit a midi note before it starts to record.
    Anyone out there with the info

    that is so wack, i cant believe this is ok with everyone, i need wait for note mode , it might be a mental thing but dam, thanks for the info, something so simply

  • Where is scroll bar for notes? can you change sorting for notes to A-Z?

    is there a scroll bare for NOTES in icloud? Can you change sorting to A-Z?

    Are you asking about viewing your Notes on https://www.icloud.com/#notes  on a Mac?
    In Safari the scrollbar will appear, when you start to scroll the note list with a trackpad or a mouse.
    In the Notes.app the scroll bar will always be visible, if you enable the scroll bars in System Preferences > General > Show Scroll Bars > Always
    In the Notes-app the list can be sorted by title from the "View > Sort by" menu, but on icloud.com I do not know of a similar option.

  • I have a specific font set for my outlook emails. When I use "send link" and need to add a note in that email, the font changes. How can I stop the font change? Thanks.

    I know this it "nit-picky", but to me it is frustrating. Is there a way to lock my chosen font and keep it from changing when a link from the internet is added to the email? Thanks.

    I at first thought it might be a Mac thing, but I couldn't find a solution. I realized that the date only affected my email, so then I thought it must be a Mozilla problem.

  • Hello - just looking for some guidance. I have MBP running OS X 10.10.2, Acrobat X 10.1.13. The display on MBP is perfect except in Acrobat - where the fonts are jagged not just on the document but also in the menus and dialog boxes. Any ideas how to corr

    If anyone can help me, that would be hugely appreciated!

    I have the same issue now after downgrading my Flash plugin. I downgraded from 10 to 9 latest because I like using Camino and for some reason Flash 10 doesn't play nice with Camino. But all of a sudden as I use Camino 2b2 for everyday and Safari 3.2 for banking and such, the browser hangs requiring a forced quit when I close it. I've re-installed the browser twice now with all the previous folders, and preferences erased and caches emptied. I even when to re-installing 10.5.6 and it still crashes, it's odd. Maybe 10.5.7 will address this.

  • Font setting for the line headings of a numbered list

    I have been setting up Word files which are in outline form with A., 1., a., etc. as the numbering. In Word, the line heading (A., 1., etc.) take on the font and size that I use for the line text. In Pages, it seems to be stuck on a default size that is larger than I want (seems to be 10) and Times New Roman font, which I don't like. I can highlight the line text and change its size and font but the the heading remains the same. I can't find anything in Preferences about this. Is there a control somewhere?
    Message was edited by: Sonic10

    I'm not sure I understand what you want to do, but it sounds like it is something you can solve by creating a new template.
    1. Modify the styles in the Style Drawer in a file so they look like you want them to look.
    2. Save the file as a template.
    3. Use that template to create new files.

  • [solved] vconsole.conf FONT setting is not respected in systemd

    I recently converted my Arch system to a pure systemd setup (as described here), and everything seems to be working as before.
    Well, almost everything.
    Prior to switching over to systemd, I had already moved all config settings (except for the DAEMONS line) out of /etc/rc.conf and into the individual config files, and at that time, I had set up /etc/vconsole.conf as follows:
    KEYMAP=us
    FONT=ter-216n
    FONT_MAP=8859-2
    When running under initscripts, this was working fine, and I would get the nice Terminus font at my console TTYs. Now, running under systemd, the consoles are no longer using Terminus. Instead, I just get the default font (whatever it's called). It's as if the FONT I set in /etc/vconsole.conf is being ignored.
    systemctl reports the following, indicating (I think) that the systemd-vconsole-setup service ran successfully:
    [owner@computer ~]$ systemctl status systemd-vconsole-setup.service
    systemd-vconsole-setup.service - Setup Virtual Console
    Loaded: loaded (/usr/lib/systemd/system/systemd-vconsole-setup.service; static)
    Active: active (exited) since Wed, 08 Aug 2012 08:31:51 -0700; 9h ago
    Docs: man:systemd-vconsole-setup.service(8)
    man:vconsole.conf(5)
    Process: 151 ExecStart=/usr/lib/systemd/systemd-vconsole-setup (code=exited, status=0/SUCCESS)
    CGroup: name=systemd:/system/systemd-vconsole-setup.service
    So, I'm stuck. Can anybody point me in the right direction?
    Last edited by Steven Monday (2012-08-09 05:31:49)

    89c51 wrote:
    ... it should be
    FONT_MAP=8859-2_to_uni
    Yes, you're right. I have updated my /etc/vconsole.conf accordingly.
    However, I just tested this, and it turns out that my FONT_MAP mistake was not relevant to my original problem.
    progandy wrote:I didn't modify the file, but then I use Early KMS start for my radeon driver.
    https://wiki.archlinux.org/index.php/Ke … _KMS_start
    Interesting. It turns out that using early KMS start also solves my console font problem. I think I prefer this solution, since it doesn't involve overriding systemd-vconsole-setup.service. Enabling early KMS start feels like a less invasive change. As documented here, I simply added i915 to the MODULES line in /etc/mkinitcpio.conf, and then rebuilt the /boot/initramfs-* files.

  • Where to System setting for Back-up (Tribe)

    Hey Tribe
    Do I just copy the system preferences app. as a back-up? If not where do I find the system settings for copy as this is the biggest B** about having to set every thing back up after a system restore.
    Kaiso

    Kaiso,
    Maybe someone with more knowledge than me in "restoring" the settings if needed might chime in and help you.
    I have an external cloned disk and also use Backup from .mac.
    Now, I would burn more than the Preference folder. I would burn the whole Library so you can have all your settings, mail accounts, KeyChain (passwords for sites, etc)

  • [SOLVED] Virtual console font setting is not being applied

    TL;DR I want to have the ter-114b font (from the terminus-font package; its path is /usr/share/kbd/consolefonts/ter-114b.psf.gz) as my console font.
    What have I done:
    % cat /etc/vconsole.conf
    KEYMAP=br-abnt2
    FONT=ter-114b
    According to the wiki, this setting should be sufficient. However, there is something wrong, because whenever I reboot my computer, I get the default font instead (I can notice that by executing setfont ter-114b, then I see the difference).
    Further information:
    % systemctl status systemd-vconsole-setup
    ● systemd-vconsole-setup.service - Setup Virtual Console
    Loaded: loaded (/usr/lib/systemd/system/systemd-vconsole-setup.service; static; vendor preset: disabled)
    Active: active (exited) since Sa 2014-12-20 19:41:23 BRST; 12min ago
    Docs: man:systemd-vconsole-setup.service(8)
    man:vconsole.conf(5)
    Process: 193 ExecStart=/usr/lib/systemd/systemd-vconsole-setup (code=exited, status=0/SUCCESS)
    Main PID: 193 (code=exited, status=0/SUCCESS)
    CGroup: /system.slice/systemd-vconsole-setup.service
    The Wiki also mentions something about loading KMS earlier than vconsole, however I'm not sure if this refers to the part which talks about putting 'consolefont' as a mkinitcpio hook, or if this refers to the whole section. Anyways, even if I tried to follow this, the problem is the i915 hook (my notebook has an Intel graphics card) doesn't exist as a mkinitcpio module, as the wiki indicates. Or I don't have the necessary module file.
    Any clues about what could be wrong here?
    Edit: typo
    Last edited by thiagowfx (2014-12-20 23:06:53)

    Stripped down version of pacman -Ql mkinitcpio. Notice that there is no i915 hook:
    mkinitcpio /etc/
    mkinitcpio /etc/initcpio/
    mkinitcpio /etc/initcpio/hooks/
    mkinitcpio /etc/initcpio/install/
    mkinitcpio /etc/mkinitcpio.conf
    mkinitcpio /etc/mkinitcpio.d/
    mkinitcpio /usr/
    mkinitcpio /usr/bin/
    mkinitcpio /usr/bin/lsinitcpio
    mkinitcpio /usr/bin/mkinitcpio
    mkinitcpio /usr/lib/
    mkinitcpio /usr/lib/initcpio/
    mkinitcpio /usr/lib/initcpio/functions
    mkinitcpio /usr/lib/initcpio/hooks/
    mkinitcpio /usr/lib/initcpio/hooks/consolefont
    mkinitcpio /usr/lib/initcpio/hooks/keymap
    mkinitcpio /usr/lib/initcpio/hooks/memdisk
    mkinitcpio /usr/lib/initcpio/hooks/resume
    mkinitcpio /usr/lib/initcpio/hooks/shutdown
    mkinitcpio /usr/lib/initcpio/hooks/sleep
    mkinitcpio /usr/lib/initcpio/hooks/usr
    mkinitcpio /usr/lib/initcpio/init
    mkinitcpio /usr/lib/initcpio/init_functions
    mkinitcpio /usr/lib/initcpio/install/
    mkinitcpio /usr/lib/initcpio/install/autodetect
    mkinitcpio /usr/lib/initcpio/install/base
    mkinitcpio /usr/lib/initcpio/install/block
    mkinitcpio /usr/lib/initcpio/install/consolefont
    mkinitcpio /usr/lib/initcpio/install/filesystems
    mkinitcpio /usr/lib/initcpio/install/fsck
    mkinitcpio /usr/lib/initcpio/install/fw
    mkinitcpio /usr/lib/initcpio/install/keyboard
    mkinitcpio /usr/lib/initcpio/install/keymap
    mkinitcpio /usr/lib/initcpio/install/memdisk
    mkinitcpio /usr/lib/initcpio/install/mmc
    mkinitcpio /usr/lib/initcpio/install/modconf
    mkinitcpio /usr/lib/initcpio/install/pata
    mkinitcpio /usr/lib/initcpio/install/resume
    mkinitcpio /usr/lib/initcpio/install/sata
    mkinitcpio /usr/lib/initcpio/install/scsi
    mkinitcpio /usr/lib/initcpio/install/sd-shutdown
    mkinitcpio /usr/lib/initcpio/install/sd-vconsole
    mkinitcpio /usr/lib/initcpio/install/shutdown
    mkinitcpio /usr/lib/initcpio/install/sleep
    mkinitcpio /usr/lib/initcpio/install/strip
    mkinitcpio /usr/lib/initcpio/install/usb
    mkinitcpio /usr/lib/initcpio/install/usbinput
    mkinitcpio /usr/lib/initcpio/install/usr
    mkinitcpio /usr/lib/initcpio/install/virtio
    mkinitcpio /usr/lib/initcpio/shutdown
    mkinitcpio /usr/lib/initcpio/udev/
    mkinitcpio /usr/lib/initcpio/udev/01-memdisk.rules
    Also, suppose I add this hook anyway, so my /etc/mkinitcpio.conf has this line:
    HOOKS="base systemd autodetect i915 modconf block filesystems btrfs keyboard consolefont keymap fsck"
    Output of mkinitcpio -p linux:
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> Starting build: 3.17.6-1-ARCH
    -> Running build hook: [base]
    -> Running build hook: [systemd]
    -> Running build hook: [autodetect]
    ==> ERROR: Hook 'i915' cannot be found
    -> Running build hook: [modconf]
    -> Running build hook: [block]
    -> Running build hook: [filesystems]
    -> Running build hook: [btrfs]
    -> Running build hook: [keyboard]
    -> Running build hook: [consolefont]
    -> Running build hook: [keymap]
    -> Running build hook: [fsck]
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ==> Starting build: 3.17.6-1-ARCH
    -> Running build hook: [base]
    -> Running build hook: [systemd]
    ==> ERROR: Hook 'i915' cannot be found
    -> Running build hook: [modconf]
    -> Running build hook: [block]
    ==> WARNING: Possibly missing firmware for module: aic94xx
    -> Running build hook: [filesystems]
    -> Running build hook: [btrfs]
    -> Running build hook: [keyboard]
    -> Running build hook: [consolefont]
    -> Running build hook: [keymap]
    -> Running build hook: [fsck]
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    See? This hook doesn't exist in my system for some odd reason. Maybe some package is missing? I have xf86-video-intel.

  • Where is the setting for Transitions "Available Media" in 10.0.8

    I use FCP X 10.0.8 And learning from an Video Tutorial from izzyvideo.com. A very good Tutorial for FCPX.
    But in the Tutorial he show how to change the settings for Transitions from Full Overlap to Available Media in the Preferenses.
    In 10.0.8 these settings is not under "Prereferences", "Editing"???
    Where are they?
    I tried FCP Help but it just say "The selected topic is currently unavailable"
    Best regards

    Thank you for the very quick responce, i was just away and get my coffe and had the answer when come back.
    I am impressed!
    Thanks again Tom Wolsky.

  • Global Setting for *NOT* DELETING files in iTunes?

    Hi Everyone-
    Why is the default setting in iTunes to delete podcasts once listened to? There are many episodes I want to retain.
    I would like the control to delete stuff when I want, and not at the whim of iTunes.
    Can you explain how to set the program to NOT DELETE as  a default? Or do I have to seek another client-AGAIN?
    Thanks,
    M

    Go to Podcasts > My Podcasts then at the top right select Episode List from the view options. Second button in at the lower right should be the default Settings... button. I'd still go through the individual podcasts to make sure they haven't picked up autodelete options from elsewhere/when.
    I'd recommend you go to Edit > Preferences > Store and untick Sync podcast subscriptions and settings. This feature appears to have cause problems for others, myself included, when settings from an iOS device override those in iTunes.
    See also Backup your iTunes for Windows library with SyncToy. Having a full backup means you can restore your library when something goes wrong.
    tt2

  • Set and retain default font setting for Convergence

    Is there an nwsmextendeduserpref for setting the default font for Convergence when composing a mail?
    I tried meFontFace=Tahoma,Verdana,sans-serif but that didn't work
    Anyone know the answer?

    eolair wrote:
    Is there an nwsmextendeduserpref for setting the default font for Convergence when composing a mail?No. There is an existing Request-For-Enhancement to have this functionality added in a future version:
    RFE#6759946 - "End users should be able to set their own default font and fontsize in compose"
    You will need to raise this RFE with your Sun Account Manager.
    Regards,
    Shane.

Maybe you are looking for