Where is Implicit UI Personalization stored for end users?

We are using Netweaver 7.0 ECC 6.0 and have users who personalize their time entry views in ESS using Implicit UI Personalization (Ctrl Right-Click).
Can someone tell me where this personalization is stored? We have been asked to provide a list of all users who use personalization for time entry and what it is they've personalized.
Thank you in advance.
Jeff

Jeff,
you can check under system administration - support - portal content directory - personalization clean up
Thanks
Bala Duvvuri

Similar Messages

Where Are The Master Files Stored For iWeb?

I can't seem to figure out where the master files are stored in iWeb. For example I was trying to help of friend with his iWeb website, so I told him to send the files - and then I was planning to load them into iWeb on my computer... but I couldn't figure out where to put them... and he did not know where they were either!
Question: Where are the master files stored for iWeb?

http://docs.info.apple.com/article.html?artnum=303670
http://iWebFAQ.com/1Site2Computers
http://iWebFAQ.com/#Backup

Page customization for end user

is it possible to use other mechanism for end users to customize their own pages instead using the portal features since it's a little complicated cause each user needs to create new pages, add portlet, etc.
Can we use the mechanism like my cnn, my yahoo,excite and how to do that in a simple way?
thanks for helping

Hi,
I have the same question, but I would like to have a seperate page or application, showing only predetermined portlets, for users to choose from and place on their page. I do not want the end user to ever see the customization process Oracle uses. Can this be done???
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Karthika Siva ([email protected]):
A simple way to do this:
1. Create a page that will become the default page for end users. This page will have your branded look & feel (style) and contain a default set of portlets. These are portlets that you think your typical user will find useful.
2. Create portal user.
3. Grant one of the following privileges on the page to the user. Grant 'Full Customization' or 'Add Only Customization' depending on how much control you want to give the end user. Keep in mind that both of these privileges allow the end user to only customize their PRIVATE VERSION of the page. Others will see the default, or their own version if they have also personalized it. See the online help on the Access tab of the Customize Page screen for a description of the privileges.
4. Once that is done, set this page as the default home page for the user. You can do this using the Preferences tab on the edit user screen.
Now the portal user can log into the portal, and personalize his/her page by customizing portlets on the page, hiding/showing default portlets, and even adding other portlets to the page.<HR></BLOCKQUOTE>
null

SCSM 2012 SSP Permission for End users

Hello Experts,
I have an issues with SSP - SCSM 2012 SP1.
As an admin user, I can see theOfferings, see the pending requests, can see the requests I have submitted, Approve them etc. But when I am an end user, browsing from my laptop, I see a blank Home page. I dont see the Service offerings in the
homepage..even I dont see the Need Help? text. What is the issue? FYI : Silver light is already installed on my laptop.
Interestingly, I see the Need Help? text with the same end user credential when I am opening the browser inside the server wher SSP is installed.
But, in both the cases, whether I browse in the server or from my laptop, I dont see the service offerings anywhere when i am an end user. I followed the below article..but no success.. :(
http://systemcentertech.com/2012/06/28/scsm-2012-portal-service-catalog-empty-for-end-users/
Please help...
Thanks!
Thanks

Hi,
Did you add the Service Offerings and Request Offerings to the Catalog Group? Here is another good blog on this you can reference:
http://www.concurrency.com/blog/scsmportalpermisions/
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

Credential manager to see credentials stored for all users?

Is there a way to see and manage credentials stored for all users on a server (we use 2008 R2) rather than just the user who logs on and uses credential manager (or the cmdkey command)? We have users using three terminal servers and some of them store
incorrect creds (wrong username or password), so would be good for myself as domain admin, if I could go to the servers myself, and remove any credentials that OTHER users have stored.

Hi
The cached credential are stored in a special location in the registry. (an example there;
http://msitpros.com/?p=1029)
I doubt you can manipulate the string directly as it's encrypted (possibly "salted" with the user token), but maybe their is some workaround that I don't know of. (edited; to erase it's surelly easily doable)
Regards, Philippe
Don't forget to mark as answer or vote as
helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Recording NWBC scripts for End User Experience

Hi Experts,
I am recording NWBC scripts using the Netweaver Business Client GUI for loading and running it through Robots for End User Experience Monitoring. I don't see an option to "LogOff" in NWBC client while recording the script. We only have option to "Close all session and LogOff" in NWBC client .
When I am using this option, it closes all the sessions including the EEM Recorder also without saving the recording .
I need to include "LogOff" as the last step so that it doesn't leave any active sessions for each run by different robots.
I have a Solution Manager 7.1 SP10 and NWBC client 3.5 Patch 13.
Please help me achieve this.
Regards,
Manish K

Hi,
for a browser the recommendation is to open a new, empty tab to keep the browser alive while closing the tab with the session. All that with the hope that the backend will use the triggered event of collapsing tab to close session.
Maybe a similar strategy works for NWBC.. but I don't know the UI in detail.

Reset passwork for end user using XE version 2.1.0.00.39

Hi All,
I would like to create a link "Change Password" for end users to able to change their password anytime. I've followed the link below
Self Reset Password
but it still require the admin login before end users can change their password.
The following steps that I did:
1. Under "Shared Components", create a Navigation Bar entry name "Change Password".
2. On page 1, click on the "Change Password" link under Navigation Bar and entered
Target Type = URL
URL Target = javascript:popupURL('f?p=4350:53:&SESSION.:::53.F4350_P53_USER_NAME::APP_USER');
How do i make the "Change password" link go directly to reset password page after end users clicked on it without admin login require? I'm using a default authentication and all end users assigned to user group.
Thanks in advance,
Kevin

Kevin,
You want the users to go to popup page 58 (in application 4350). See this thread: Re: Pop Up Change Password Window . But I don't know if that will work in 2.1.
In general, you're better off using other types of account management tools such as LDAP.
Scott

CProjects for end users

Afternoon all, i've recently installed cProjects as a add on to a WEBAS system, i'm after some useful links/information about how to use the product at all, as i've no real experience of it.
Any help would be much appreciated, the SAP guides don't seem to be suited for end users thats all....

Hello James,
From your post I cannot make out which release of cProjects have you installed (3.1 or 4.0). Any way pl find below the links to the help.sap.com portal which is a detailed guide to cProjects Suite.
cProjects Suite 3.1
http://help.sap.com/saphelp_cpro31/helpdata/en/home.htm
cProjects Suite 4.0
http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
Hope this helps.
Rgds
Deepak

Applet Debugging Option for End Users

Users in our 12.0.4 development system that only have the 'xMII Users' role can see and use the 'Applet Debugging' option under the System Management menu. I'd prefer them to only have the options under the Support menu.
I'm puzzled why this one option is availble for end users. What am I missing?
David Macindoe

What am I missing?
I guess nothing.
Its just that it is designed this way. Moreover the option is harmless from a Security point of view.
May be you will find this 'fixed' in later versions.

Training Material for end-users

Hi SAP Gurus,
I need to prepare a Online Quick Reference (OLQR)/questionnaire/FAQ's (SAP R/3 4.7 -FICO and integration of FI-SD & FI-MM), for the end-users, which they will refer to after Go-Live.
I also need to prepare training material for end-users for (SAP R/3 4.7 -FICO and integration of FI-SD & FI-MM),to be used during the training session's prior to Go-Live.
I would appreciate, if someone could please send me project documents related to the same on my email id [email protected]
This is very urgent and I have to complete the documents ASAP, so please reply at the earliest.
Thank you all in advance.
-- SJ
null

Hi Ravi,
Thanks alot for your help.
But, I was looking for some Project documents that I can refer to for preparing Training Material and questionnaire/FAQ's/online documents (SAP R/3 4.7 -FICO, SD & MM) for the end-users, which they can refer to after Go-Live.
It would be great, if you could please send me some project documents on my email id: [Email removed by moderator]
Thanks,
--SJ
Message was edited by:
Mario Herger

Failed to update permissions used for end-user recovery on . Permissions update failed for the following reason: (ID 3123)

I patched 2012 to the SP1 level and now I'm getting these warnings on many servers.
It seems to be considering these items as removable media?
DPM 2012, SP1, version 4.1.3313.0
Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
Affected area: skutter.pmuk.net
Occurred since: 11/01/2013 09:04:43
Description: Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
DPM is unable to enumerate contents in 2aad3f75a7e54a0f91b640d7f158f00a , 5702fef3756e4ca8af0554013951f32d , 78f9e6070fbd43aeb328700a88a3c926 , aquaria.pmuk.net_MTATempStore$ , ariel.pmuk.net_MTATempStore$ , atlantis.pmuk.net_downloads , atlantis.pmuk.net_MTATempStore$
, atlantis.pmuk.net_print$ , capricorn.pmuk.net_MTATempStore$ , CCM.pmuk.net_IvrDirectory , CCM.pmuk.net_MTATempStore$ , CHIRON.pmuk.net_MTATempStore$ , cpeserv-i03.pmuk.net_IMAGING , defiant.pmuk.net_idsc , defiant.pmuk.net_MTATempStore$ ,firebird.pmuk.net_Accts_serve
, firebird.pmuk.net_case , firebird.pmuk.net_Control ,firebird.pmuk.net_Fuel Cell , firebird.pmuk.net_HADCAD , firebird.pmuk.net_haddesign , firebird.pmuk.net_hadendurancelab , firebird.pmuk.net_HADEngCad , firebird.pmuk.net_HADPCLGainspeed ,firebird.pmuk.net_HADPCLProjects
,firebird.pmuk.net_HADPCLQuality , firebird.pmuk.net_HADPCLStandards , firebird.pmuk.net_hrXerox , firebird.pmuk.net_hs , firebird.pmuk.net_ITXerox , firebird.pmuk.net_JunHigashimura , firebird.pmuk.net_MTATempStore$ ,firebird.pmuk.net_office ,firebird.pmuk.net_OMPM
, firebird.pmuk.net_Outplacement ,firebird.pmuk.net_personal , firebird.pmuk.net_PJSESCANNER ,firebird.pmuk.net_pmuk ,firebird.pmuk.net_pwa ,firebird.pmuk.net_pwa2 , firebird.pmuk.net_scanfret ,firebird.pmuk.net_Siebel8 ,firebird.pmuk.net_Spares
,firebird.pmuk.net_test ,firebird.pmuk.net_TVDC ,firebird.pmuk.net_xeroxcpe$ ,firebird.pmuk.net_xeroxrd$ , HALLEY.pmuk.net_MTATempStore$ ,legion.pmuk.net_dfs ,legion.pmuk.net_MTATempStore$ , legion.pmuk.net_NETLOGON ,legion.pmuk.net_SYSVOL
, nemesis.pmuk.net_KEvin ,nemesis.pmuk.net_MTATempStore$ , PLEIDES.pmuk.net_Archive , PLEIDES.pmuk.net_DGHOME , PLEIDES.pmuk.net_MTATempStore$ ,PLEIDES.pmuk.net_print$ , roosevelt.pmuk.net_ARCserve$ ,roosevelt.pmuk.net_CHEYALERT$ , roosevelt.pmuk.net_HADQCEOLP
,roosevelt.pmuk.net_home3 , roosevelt.pmuk.net_MTATempStore$ ,roosevelt.pmuk.net_smssource , roosevelt.pmuk.net_WindowsEasyTransfer ,roosevelt.pmuk.net_XeroxScan , sagittarius.pmuk.net_MTATempStore$ ,sagittarius.pmuk.net_print$ , sakura.pmuk.net_MTATempStore$
,scorpia.pmuk.net_MTATempStore$ ,scorpion.pmuk.net_chandleram, scorpion.pmuk.net_Control ,scorpion.pmuk.net_CPE ,scorpion.pmuk.net_Digital ,scorpion.pmuk.net_Electrical , scorpion.pmuk.net_MTATempStore$ , scorpion.pmuk.net_NASUtils ,scorpion.pmuk.net_Personal
,scorpion.pmuk.net_QA ,scorpion.pmuk.net_QC , scorpion.pmuk.net_Technical , silverberg.pmuk.net_dfs ,silverberg.pmuk.net_MTATempStore$ ,silverberg.pmuk.net_NETLOGON , silverberg.pmuk.net_SYSVOL ,skutter.pmuk.net_dfs , skutter.pmuk.net_MTATempStore$ ,skutter.pmuk.net_NETLOGON
,skutter.pmuk.net_sharepoint-saver ,skutter.pmuk.net_SYSVOL , tempest.pmuk.net_MTATempStore$ , tempest.pmuk.net_Quarantine ,tempest.pmuk.net_SiteBackups , tempest.pmuk.net_tsdp , titania.pmuk.net_MTATempStore$ , valiant.pmuk.net_domino , valiant.pmuk.net_hadprod
, valiant.pmuk.net_MTATempStore$ ,valiant.pmuk.net_oracle ,vindaloo.pmuk.net_MTATempStore$ , virgon.pmuk.net_faxclient ,virgon.pmuk.net_FxsSrvCp$ ,virgon.pmuk.net_MTATempStore$ , xavier.pmuk.net_Address ,xavier.pmuk.net_downloads ,xavier.pmuk.net_drivers ,
xavier.pmuk.net_Exchange IS Starter ,xavier.pmuk.net_ExchangeOAB , xavier.pmuk.net_ExchangeUM , xavier.pmuk.net_MTATempStore$ , xavier.pmuk.net_out-arch , xavier.pmuk.net_Resources$ on the protected computer tower.pmuk.net. Recycle Bin, System Volume Information
folder, non-NTFS volumes, DFS links, CDs, Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details: )
Any Ideas? backups are OK, recovery points/sync's etc.
Mark.

I am using DPM 2012 R2, what finally worked to me to resolve my problem with EUR was to:
In DPM I disabled EUR
In Computer Management delete all DPM Shares (\\?\c:\Program Files\...)
Using ADSI edit go to CN=MS-ShareMapConfiguration,CN=System,DC=X,DC=Y (Replace X & Y for your domain)
Delete all of the mappings within the container
In DPM enable EUR
In DPM on a protection group I created a new recovery point and selected “Only synchronize (available only for file data)”
Related article on ADSI Edit and DPM -
http://social.technet.microsoft.com/Forums/en-US/e0258384-8422-408c-8839-2580d616a9ec/edsi-edit-related-to-data-protection-manager?forum=dpmfilebackup
I hope this helps
JD Young

Utilizing the Workspace for end users

Trying to see how can I utilize the existing workspace for "end users" who are supposed to access the application, I have two questions:
1- How to remove the extra regions, logos and etc.
2- How to add link to the application
Thanks,
Mehr

I'm not clear on your question, but I'm going to take a wild stab in the dark and think you would like to customise the workspace login
http://www.grassroots-oracle.com/2013/02/modifying-apex-workspace-login-page.html
Why not provide them the appropriate URL in the first place?

Personalization preview okay but doesn't show for end user

Hi,
I've built a folder structure for iviews, pages, worksets, and roles and then delta linked across the standard ESS iviews into my new iview folder. I've done the same with the pages and then updated the page with the copied iview and from there built up the worksets and roles.
I've then gone into the role down to a page, previewed it and made some personalisation changes to field labels. This all seems to work fine but then the personalization changes are not being seen when I go and view the ess screens direct (either with an end-user logon or with my admin user viewing the screens direct).
All users are assigned the role through which I've made the personlisation changes.
Am I missing something. My understanding is that the personalisation changes in the role will be seen by all those that use the role i.e. ESS role within com.xyz.
Are there other things I can check?
Any help much appreciated.
We're on NW 7.0 EHP1.
Regards
Phil

Hi Gopal,
Thanks for your response. Unfortunately no personalization at any level is showing from an end-user view.
One thought.... are changes required to the "URL of PCD Page" in the homepage framework to point at the new role location?
For example the personal information page points at resource EMPLOYEE_PERSINFO_ERP2005_PAG which currently has a PCD location set as: ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_personal_information/
com.sap.pct.erp.ess.area_personal_information
I've not read anywhere that this needs to change (to point at com_<companyname>) , but maybe it does?

Where is iPhoto Location information stored for third-party plug-ins/export

I use Smugmug for my photos. There is a standalone Smugmug uploader called MacDaddy that can upload photos from iPhoto and a plug-in that adds to the Export menu and uploads straight from iPhoto. Neither of these manages to get the GPS information, though. Does the built-in Flickr uploader successfully include GPS information? If I export photos from iPhoto and check Include Location Info, and then upload it works fine. So where is the Places info stored and how would a third-party uploader access it so that I could directly upload from iPhoto without having to first export?
I sent them the AlbumData.xml and it didn't seem to be available there. Any help would be appreciated.
Thanks.
Ernie

I just today went through this with Picasa Web Albums. I'll tell you how I got that to work.
First in iPhoto if you select your photos (I'd use an album or smart album to collect them) you can click on File > Export > and choose File Export in the bar on the Export window. At that point you can choose to include Location Information. Export your photos to some file of your choice. At that point they are normal jpeg files with L/L info.
Now I presume Smugmug has an uploader you can use from there.
This isn't slick but it seems to give me more freedom than the Picasa add-on for iPhoto. Of course I don't have the synchronization I understand the Flickr built in uploader gives but I don't believe I want that anyway.

Where is the MailAccounts.plist stored for a network user account using Apple Mail on Snow Lion?

Where is the MailAccounts.plist file stored for a network user using Apple Mail on Snow Leopard? It appears one of my users has managed to do something to their mail account as Apple Mail will no longer close once opened and the Sent Folder has a perpetual spinning pinwheel.

They would have to be logged in as separate users in order not to see your account in Mail. Whatever accounts put in Mail under your account will show up. All mail accounts usually have there own user and password. The only thing you can do is to remove the password from Keychain and take the account offline so you don't keep getting prompts for passwords each time it checks for mail.
Not a great solution.
Best way is to give the other user their own user account with their own mail and enable fast user swithcing to log between the different users if all access the computer frequently.

Where is Implicit UI Personalization stored for end users?

Similar Messages

Maybe you are looking for