Where is iso file in boot camp support download to copy to usb drive?

I am attempting to install Windows 7 professional 64 bit on a 21" imac. I have downloaded boot camp support software 5.0.5033. I have a 4gb flash drive installed. When I run boot camp I am asked to install a iso image. I can not find an iso image. I have tried using msft.digitalrivercontent.net/win/x17-59186.iso and let it run for up to 4 hours and I get a message that the server cannot be found.
Any suggestions on what I am doing wrong?

Follow the Apple's steps to install Windows > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf When you have installed Windows, install the Boot Camp support software you have downloaded

Similar Messages

Boot Camp Assistant says There is no USB drive connected to the system

I have a mid-2012 11” Macbook Air and a USB Superdrive. I am trying to use Boot Camp Assistant but it is not letting me proceed. With the Superdrive plugged and Windows 7 (full version) DVD in the drive, I get the message “No USB Drive” – “There is no USB drive connected to the system. Please insert a USB drive to continue.”
I checked using Finder and Go->Computer and there is the Windows 7 installation DVD mounted properly. The Superdrive spins up when I plug it in. I tried both USB ports. I tried re-booting with the Superdrive attached. The laptop is plugged in and there is an internet connection. It is running Mac OS X 10.8.3. I read the Installation and Setup PDF guide and there was no mention of the problem. I searched these forums and found that two other people are/have experienced the same problem, but there is no posted solution.

Randall Venhola wrote:
At the second step in the wizard, there is a dialog with three check-boxes. The only way I can proceed is if I uncheck the option "Download the latest Windows support software from Apple". When checked, I get the "No USB drive" message. Checking or unchecking the other two options does not change the behavior ("Create a Windows 7 or later install disk" and "Install Windows 7 or later"). I have tried with the Superdrive attached with Window 7 in the drive, with a blank DVD and without the Superdrive.
You are not following the Boot Camp instructions. Did you select the option to read the instructions? When running Boot Camp Assistant you are given the option to download the support software. If this is selected you must connect a usb stick that is correctly formatted per the instructions. At this point in the process you sshould not have your superdrive or Windows dvd connected.
Read the instructions.

Where can I download Boot Camp Support Software 4.0.4131?

When I try to download the software it says the link cannot be found.

Can you use this link Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support or Boot Camp Support Software 4.0.4033?

Windows 8 Boot Camp support software

Good day, I have installed Windows 8 successfully on my Macbook, [OS X Mountain Lion] using Boot Camp assistant. When I got to the step to install the Boot Camp Support software with the CD I created during installation through bootcamp, a pop up message appeared: "This version of Boot Camp is not intended for this computer model." I am stuck in Windows at the moment, there is no way to restart in Mac OS X now, I have tried the hold down the option key while restarting too, it doesn't work.
1. how can I get to restart in Mac again?
2. where can I download the correct Boot Camp support software for this computer for Windows 8? [macbook pro with retina display; OS X Mountain Lion]
thanks
LMD

_LMD wrote:
Good day, I have installed Windows 8 successfully on my Macbook, [OS X Mountain Lion] using Boot Camp assistant. When I got to the step to install the Boot Camp Support software with the CD I created during installation through bootcamp, a pop up message appeared: "This version of Boot Camp is not intended for this computer model." I am stuck in Windows at the moment, there is no way to restart in Mac OS X now, I have tried the hold down the option key while restarting too, it doesn't work.
1. how can I get to restart in Mac again?
Reboot, hold the X key when you hear the chime, hold it until the computer starts to boot in OSX
2. where can I download the correct Boot Camp support software for this computer for Windows 8? [macbook pro with retina display; OS X Mountain Lion]
Windows 8 is not yet supported, there are no drivers, wait for them or use Windows 7.

Cannot create ISO image in Boot Camp on to the flash drive

After following all the steps of the article: Boot Camp: Creating an ISO........
In step 21 the progress bar reached 50% then stop a message appears Cann't establish connection?
My internet connection is fine,the documents have been copied on the 32GB flash drive formatted in FAT32,
Repeated ,change flash drives, created another image from new DVD,
Unable to finish this process?
Any ideas?

Your MacPro is a UEFI model based on How to identify Mac Pro models - Apple Support since it has a Model Identifier of 6,1. From Bootcamp Info.plist
      <key>PreUEFIModels</key>
        <array>
                <string>MacBook7</string>
                <string>MacBookAir5</string>
                <string>MacBookPro10</string>
              <string>MacPro5</string>
                <string>Macmini6</string>
                <string>iMac13</string>
        </array>
1. Use Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support to download the appropriate drivers from the Apple servers manually to a flash drive. You will need Boot Camp Support Software 5.1.5640.
System Requirements
MacBook Air (11-inch & 13-inch, Mid 2013)
MacBook Pro (Retina, 13-inch & 15-inch, Late 2013)
Mac Pro (Late 2013)
iMac (21.5-inch & 27-inch, Late 2013)
Windows 7, Windows 8, and Windows 8.1, 64 bit
2. Remove all physical external drives except the OS X and the designated Windows drive. Manually partition your drive and create a Free Space partition of the size you want. This will be split into a 128MB MSR and remainder MS Data partition. This is called EFI installation of Windows.
3. Insert your Windows DVD in the built-in Optical Drive.
4. Plug-in your USB2 flash drive from step 1. Remove all other external peripherals, except Keyboard/Mouse/Display. The Keyboard/Mouse being wired eliminates issues with Bluetooth.
5. Start BCA and choose the last option 'Install/Remove Windows'. Choose the EFI Boot from the DVD. You can also do the same using the Alt/Option key when powering up the MacPro.
6. Windows installer should start. If it does not, please post back with any error messages.
I assume that you have not modified Bootcamp info.plist to try and create a bootable USB.

Blue screen while installing Boot Camp support software in Win7 Ultimate x64

2012 macbook pro with OSX Mavericks. Installing Win7 ultimate x64 using boot camp assistant and a USB drive went flawlessly. Then I downloaded and installed the boot camp support software from support.apple.com/kb/DL1638
Running setup.exe bluescreens my computer and makes the windows partition unbootable after that, even in safe mode. I performed a system restore to roll back the boot camp software and booted again, and checked the log file. It pointed to an intel USB driver. I then deleted IntelxHCI from the Drivers/Intel folder, ran setup.exe again, and everything installed perfectly.
My question is: what is the Intel usb 3 extensible host controller, why is it included in the support software, and why does it immediately brick my Windows partition?

I have re-installed Windows 7 about 20 times already, I am experiencing the same problem as you are. The issue must be some kind of driver being installed by Boot Camp. When I leave my fresh Windows 7 install with no Boot Camp, the error or blue screen never occurs. This is weird.
Help please Apple...

Can I download boot camp support software outside of boot camp assistant?

I've been able to install windows 7 with boot camp assistant and an external cd/dvd drive. I have not, however, been successful at downloading and applying the boot camp support software. It has either not loaded onto a USB drive, or will refuse to write to a CD. Is there a solution to this, and/or can I download the up-to-date support software from another machine, burn it to disc and run it in windows (as older versions ex. 3.1, seem to be .exe files)?

Can you use this link Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support or Boot Camp Support Software 4.0.4033?

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

HT5634 Boot Camp support drivers install unsupported MacBook Air 11inch

I successfully installed WIndows 7 64bit from a USB on my 2013 MacBook Air 11inch and it seems to function properly. When I tried to install WIndows support software I keep getting "Boot Camp x64 is unsupported on this compter model" message. The Boot Camp support site states that this install is supported using Boot Camp 5 (which is the version I used). I've found a few workarounds on-line that mention doing something via the disc in the CD/DVD drive, but I didn't go that route so I am unsure how to proceed. Anyone have any guesses on how to make this work?

This sounds weird to me. I just installed 64x on your model macbook air at work today and everything went off with out a hitch. Perhaps you could try to redownload the drivers from boot camp assistant? I have had issues occasionally with boot camp drivers and redownloading usually works out for me.
Best,
Stuart-

While at boot camp assistant, Downloading the windows support software stalls

From a long time windows user, I was persuaded to migrate to mac and am quite lost. While using boot camp assistant, downloading the windows support software just stalls at 20%. I tried using alternative drives, USB, DVD and the partitioned HD of imac but still to no avail. What should I do?

No problem. For me, I spent the time downlaoding the drivers for Boot Camp 4.0 (form Lion), un-installed by Boot Camp 3.0 because it wouldn't upgrade, and then learned that Boot Camp 4.0 didn't support my old MacBok Pro. I had to go back and install 3.0, then update to 3.1, 3.2 and finally to 3.3. That took me about an hour and a half... Oh well, at least I already had most of those on disc ot downloaded...

Windows 7 boot camp support

apple said that it will have boot camp support for windows 7 before the end of this year.. almost 9 days til the end of the year and still no update. anyone knows anything about that ?

Thanks for the suggestion but I've already tried this - there was even a thread which suggested that I uninstall keyboard & mouse in OSX and then reboot in W7 and install the devices ther first (the rationale being that somehow OSX "reserved" the devices if installed there first, but that the converse was not true for W7). However, it didn't work!.
Just to clarify, Wireless keyboard & mighty mouse still work flawlessly in OSX. They appear on the blootooth device list in W7, but there are no related items showing in the services tab in the properties of each - and I've tried many suggested workarounds.
As for my installation, sound worked perfectly with no tweaking - I've seen threads saying that installing latest Realtek drivers can cure the problem!
Everyone seems to have different compatibility issues with what superficially seems to be the same hardware and software (obviously it isn't!) Maybe that's why Apple are having so much difficulty with the revised drivers, and maybe now folks will apreciate how difficult it must be for Microsoft who have to make Windows work with many hardware combinations.

Boot Camp supporta solo l'installazione di Windows a 64 bit su questa piattaforma. Usa un'unità USB o DVD con Windows a 64 bit.

Boot Camp supporta solo l'installazione di Windows a 64 bit su questa piattaforma. Usa un'unità USB o DVD con Windows a 64 bit.

Is boot camp supported with mountain lion?

is boot camp supported with mountain lion?

Pretty sure it is. Ask all questions you have in the Boot Camp forum.
DALE

What is the correct boot camp support driver for late 2009 Macbook for windows 8.1

I have late 2009 Macbook with OS X 10.9.4. I want to run boot camp for windows 8.1, but unable to due to the fact that it can only run Windows 7. What is the correct Boot Camp Support Software so that I can run Windows 8.1?

Thanks for the info, but unfortunately there is no current support software or update for my issue at this time. I found the information under Boot Camp: System requirements for Microsoft Windows operating system. Hopefully Apple will fix this issue promptly!

Where is iso file in boot camp support download to copy to usb drive?

Similar Messages

Maybe you are looking for