Where is link between plant vendor and plant code
Where i can find linke between plant vendor and plant code.
Hi,
Go to XK02,
In Purchasing Data of Vendor Master, in menu Extras > Add. Purchasing Data
It is stored in Table LFA1 and field is WERKS
Similar Messages
-
What is difference between bus.Area and plant
dear experts,
what is difference between bus.Area and plant?
thanks
Rajakarthik.Hi
Plant and Business Area are not the same.
Business Areas are configured in FI module as per the Product lines or geographical operations basis.
Where as The plants created in the logistics (General) module are assigned to the company code. That means all transactions taking place in the plants are posted to the attached company code in SAP FI.
You can post a business area to several company codes and use it for cross-company-code reporting.
The R/3 System uses a combination of plant and division to assign the relevant business area. When you use the R/3 System to automatically draw up accounts for business areas, you can assign only one business area to a combination of plant and division. Plants and divisions can be assigned and combined in several different ways.
http://help.sap.com/saphelp_46c/helpdata/en/5d/a77d80ec1111d2bc1000105a5e5b3c/content.htm
Re: Business Area and Plant
Regards -
Different stock between Acount view and Plant stock in MM03
Hello Experts,
In MM03 Acount view, I found the Total stock is 1, but in plant stock view, I found the stock is Zero.
There is not really any physcial invnetory so it must be a problem on the report.
And on mm03 that it was only on the finacial view screen that stock showed, it does not show on the normal stock screens.
What cause this difference? and How to clear the stock from the financial view?
ThanksHi
Please run MB5K for the problem material. If it shows difference, then there might be inconsistency between accounting stock and plant(storage location) stock. If that is the case, physical inventory can't help. The correction(direct table update) is necessary and can only be done by SAP.
Hope the information helps.
Regards,
Polly -
Create rejection notification for SES - to vendor and plant
Hi Experts
I want to know how to enter / send rejection notificaiton for service entry sheets to vendor and plant people.Hi amitaus28
This is SAP SNC forum, Please post your question in SAP SRM forum and close this thread
SNC does not deal with service entry sheets
Best Regards
Vinod -
Where is link between 0007 and 0008 infotype
Dear Members,
Where is link between 0007 and 0008 infotype.How the system automatically populating WORK HOURS/PERIOD AND CAPACITY UTIL .LEVEL.where is integration .
Regards
NandhiniHi,
>For your first question: Working Hours/Period field in IT 0008 is determined by the Planned Working Time infotype (0007).
>The Weekly / Monthly Working Hours field in IT 0007 are system determined the specified value from the work schedule rule. Capacity utilization level is related to Infotype 0008. The relationship is that an employees basic salary and its related components are stored here and are paid based on the working hours of the employee which is obtained from Infotype 0007 and multiplied by the capacity utilzation which under normal circumstances is 100 %. If the employee belonging to the same pay scale group and level works part time say half of the normal time, you can maintain his capacity utilisation as 50% instead of maintaining seperate values in the wage types.
Regards
Chandrashekar -
Where is link between SO and SQ saved?
Hello,
How can we know that a Sales Order is derived from a Sales Quotation? Is this information saved in ORDR table?
Where is the link between Sales Order and Quotation maintained?
Thanks and Regards,
SheetalHi,
The link exists between Document_Lines.
Check BaseEntry, BaseType and BaseLine properties.
In B1 app you can do the following
1. create a SQ
2. create a SO based on SQ you just created
3. Run this query
SELECT DocEntry, LineNum, BaseType, BaseEntry, BaseLine FROM RDR1 ORDER BY DocEntry DESC, LineNum ASC
HTH
Juha -
Valuation at plant level and company code level
Hi,
Can someone explain me the difference between the valuation at plant level and company code level with a real world example?
Regards,
Malsha KalubowilaHi,
Inventory can be valuated at two levels either at company code level or at plant level. If you select valuation at company code level, all materials across all the plants will have same material price since valuation is at only company code level.
Say for example Company code 1000 is buying a material which unit price is Rs. 10 from a vendor who supplies to two different plant A & B of company code 1000. Assume Plant A is situated near vendor premises itself (so freight cost is Re 1 extra) whereas plant B is situated at far away from vendor place (so freight cost rs 2 extra) and both cases freight cost is borne by the company and not by vendor.
Assuming you have selected valuation at plant level, now in plant A same material will be valauted at Rs. 11 (10 +1) whereas at plant B it is valuated at Rs. 12 (10+2).
Whereas if you have selected valuation at company code level, price will not be valuated at plant level rather at company code level which will get updated at moving average price in this case.
So it is always best practice to select valuation at plant level rather than at company code level.
Reg
Karthikeyan G -
Link between Business area and Material master
Hi guys
Is there a link between Busines area and material master, i am getting an error when I am trying to Move part of material stock from unrestricted stock to Project stock by 411/Q.
Error
Business area xx changed to yy
Ideas?
samHi
Yes Business area has a link with MMR
Business area determination is through by three rules
1. Plant and item division
2. Sales area( sales orgdistribution channeldivision )
3. Sales org, distribution channel and item division
Here item division means the division in MMR that is basic data 1 tab and sales org 1 tab
This division field forms the main link between Business area and MMR
Regards
Raja -
Link between EKKO, EKPO and KONP
Hi,
can someone help me out to trace the link between EKKO, EKPO and KONP tables?
regards,
ravi.Hi Ravi
KONP is conditions table.
If we need the conditions(prices) of a purchase order, we can get it from EKKO, EKPO & KONV.
1. Extract KNUMV from EKKO.
2. Using EKKO-KNUMV - Extract conditions from KONV where KONV-KNUMV = EKKO-KNUMV.
3. We can find item prices where KONV-KPOSN = EKPO-EBELP.
Hope this helps you.
Kind Regards
Eswar -
Link between structure indicator and labellig system (PM-FL)
Hello,
I'm facing a problem to associate one of my alternative label with a precise structure indicator.
In our system (R/3 4.6c), we have activated the alternative system in order to use a 40-char-long label for our functional locations. We also created a structure indicator to represent these 40 characters.
When changing this alternatice label, the system shows the structure indicator of the main label. On my opinion, it is normal because I've found no customizing point that allows me to link the alternative labelling and the structure indicator. Am I wrong?
If you ever encountered this problem, could you please help me find a way to solve it?
Best regards,
AnnabelleHello,
sorry I couldn't answer your question sooner.
The situation is this one :
- functional locations have assigned primary labels. These labels are created according 43 (out of 44) structure-indicators which help in representing a structure of technical objects. Thanks to the object type, we created a link between object type and structure indicator through a specific table.
- Two functional locations can have the same ID with distinct localisations.
- a secondary label has been created in order to generate a 40-character-long ID that is necessary to have a unique ID for each functional location.
- We have a specific structure indicator (the 44th) that represents a 40-character-long text.
As both labels are mandatory in the solution, is there a customizing point where we can link a non-primary label with a defined structure-indicator?
Thanks for your help.
Annabelle -
Link between PDS name and resource
Hi folks,
I've established a link between /SAPAPO/TRPROD and Setup Matrices using PDS name and resource to use in a custom extractor for BI. This works well starting out at /SAPAPO/TRPROD and working my way over to the Setup Matrix tables using function modules BAPI_PDSSRVAPS_GETLIST and BAPI_RSSRVAPS_GETLIST.
Now I want to validate that it's correct that I'm getting 0 results in a test system. Since /SAPAPO/TRPROD has some 3000 entries and /SAPAPO/SET_MID only 2, I figured it'd be easier if I take those two matrices and see if I can link them back to /SAPAPO/TRPROD (where I won't get any results). Does this make sense so far?
Moving on ... I've found that in table /SAPAPO/RES_HEAD I can find the resource associated with a Setup Matrix. I can't figure out though how to link the resources to the PDS. Any ideas?Hi Jan!
You say that you want to link the resources with the PDS, right? Do you mean that you want to find a way to discover the resource associated with the PDS activities? If so, you can do that by reading the activity information of the PDS and getting the resource maintained there...
But I don't fully understand your business requirement... So let me know if I got your issue wrong.
Will -
Link between OINV,INV1 and OIBT,IBT1
i want link between OINV,INV1 and OIBT,IBT1 table so plz help me,
in which way i connect two table inv1 and oibtHi Vinu.........
Welcome to SAP Business One Forum............
Please check the link between these tables........
SELECT Distinct T1.BatchNum
FROM IBT1 T0
Inner Join OIBT T1 On T0.BatchNum=T1.BatchNum AND T1.ItemCode=T0.ItemCode
INNER JOIN DLN1 T2 ON T2.DocEntry=T0.BaseEntry AND T2.ItemCode=T0.ItemCode
inner join ODLN T3 on T2.DocEntry = T3.DocEntry LEFT JOIN INV1 T4 On T4.BaseEntry=T2.DocEntry Left Outer Join OINV T5 On T5.DocEntry=T4.DocEntry
WHERE T0.BaseType = 15
Hope this will help you........
Regards,
Rahul -
Regarding creating a LOOSE LINK between Sales Order and Vehicle
Hi,
Does anyone has any idea on how to establish a LOOSE LINK between Sales Order and Vehicle using BAPI_VEHICLE_CREATE or any other Function module.
Any help will be highly appreciated and rewarded.
Kind Regards,
TanujaDear Kumar,
Strategy - 40
Consumption of PIR (not Redution)
1) the first point in strategy in 40 is, incoming sales order consumes PIR
2 )both sales order and PIR takes place in MRP planning run
2) this is where it is in mostly used in many indutries
just a small example how this strategy works
1) creat PIR for ur FERT- 100Nos
2) check in MD04- u will get PIR (VSF) as 100
3) now creat sales order for 120 for same month
4 )run MRP for that particular FERT
5) check the result in MD04, here ur PIR gets vanishied and an plan order will be generated for 120 Nos.
Regards
kumar
Edited by: kumar kumar on Jul 22, 2009 8:29 AM -
Link between control record and infotype 0003.
Hi all,
Can anybody explain me, what is the link between control record and infotype 0003?
Thanks & Regards,
Lucky.Hi,
Control record is a heart of payroll area(pa03)
Conrtol record alswa based on payroll area where it determines the current payroll period for the exact date
It defines the payroll past for retro active accounting recongnation.
It lock the master data and teh time data to prevent changes from being made during the payroll run, this lock is valid for the paryroll past and the payroll present changes with effect the future can still be made.
It determines the earliset retrocatice a/cing period.
In simple control record is to control the payroll status of the employee
Payroll Status:(IT 0003)
The Payroll Status infotype (0003) contains data for Payroll Accounting and Time Evaluation.
The system automatically creates this infotype when the employee is hired. In general, the system updates the infotype and writes the changes to the payroll past.
You can change the payroll status of an individual employee using Payroll/Retroactive Accounting and Time Evaluation.
Thanks
Vibin -
Using: SQL Server 2014, SSDT-BI 2014 (VS 2013)
Since last week I log my SSIS tasks in the sysssislog table. For each job that i execute, a new executionID (executionid column in sysssislog) gets written and attached to all my SSIS tasks (source-column in sysssislog).
Problem: I run the same ssis packages with different environments. Therefore I want to join environment information to the sysssislog table. The executionID itself doesn't show me to which job and environment the task/source execution belongs to. Because
the environment information is attached to a job, I am searching for a link between the executionID and the job_id. There must be any, since a job is reason for producing all the log informations.
Does anybody have ideas how to get a link between job_id and executionID?Hi, thank you for your answer. I read your post, but I do not understand it well. To you question: Yes, I log to the same database regardless of the invironment.
Where do you inject the environment information? I could not found any information that connect a scheduled job and an enviroment (of cause it has to be somewhere but i could not find it!).
You said you log in a Script Task and use textual message to write the . From within Visual Studio one can not access the environment infos since they are stored on the SQL Server, as fas as I know. (Just configurations can be set up and selected within
Visual Studio.)
So could you please describe a bit detailled, from where you grad the env info and how you process it?
Thanks!
Maybe you are looking for
-
Two iPads one my sons should I have different accounts
I have ipad and purchased ipad air for Xmas for my son.I used my user Id email address for his as he had no Visa card seems when he downloads app it comes on to mine and not on his or does not respond
-
How can I sent a .prn file to my networked printer in windows 7
OS Windows 7, HP Photosmart 7510 wirelessly connected. The .prn is an old file created with s/w no longer applicable to WIn 7. Right clicking on the .prn file does not list the "Print" option. I've read articles on using the Run and DOS cmd to us
-
The File itune library.itl cannot be read because it was created by a newer
vesion of itune, That is the error msg I receive after updating to itunes 8 and the current quicktime. any thoughts or help-ty
-
Cannot get dvi to via cable to work
trying to connect mac to tv, help
-
Emptying trash securely does not delete all files? Any ideas?
When I try and empty trash (securely) it does not delete all files, so I am left with files in the Trash? Any ideas?