Where is link to Drupal DPS Bridge?

Hi:
There is a page describing the Drupal DPS Bridge at Introduction to Drupal DPS Bridge but there is no link to download the Drupal DPS Bridge module.
There are even videos there demonstrating the use of the Drupal DPS Bridge.
Where can I download the module?
Thanks,
Joseph

Looks like the link is not available yet, I'd suggest you contact the developers for an update, DPCI

Similar Messages

Link between PSE8 and Bridge

Can someone point me to where this link lives? I want PSE8 to launch Bridge CS5 instead of Bridge CS4, and I can't find how they're tied together.
G.

Hi Srinu,
Both r Header Tables
CRMD_ORDERADM_H Contains the Header Information for a BusinessTransaction.
IBIB : The header Table (Installed Base/IBase)
IBIN : The component Table (use the iBase number)
IBINT : The Components with Description
Each unique iBase is identified by the top material number and one serial number
Interesting can i know the brief scenrio
cheers
Ranga

How can I see where a link is directed to

About all browsers I know of show where a link is leading to,
whenever I hover over it. This information is often shown in a status bar. I cannot find how to do this with Firefox.

I already enabled the Firefox status bar, cor-el, so it '''is''' visible. 
Alas, this has no effect whatsoever when I hover over a link: 
no extra information is shown, none of the items on the status bar change. 
A pity, since that would have made things even better. 
The benefit of the Dr. Web checker is that the link is checked.

Forgot where I linked to save Screenshots on Mac, How to find out?

Forgot where I linked to save Screenshots on Mac, How to find out?
hi,
I have changed the location (default was on desktop) to save the screenshots on Mac (software: MAC OSX Version 10.7.3). But, I forgot where was it linked to (the new location). Is there any way to find out the location? If not, how to delete away those files by recent screenshots. (I use CTRL + COMMAND + SHIFT + F3) to take it. Please help me with this. Thanks a lot.

>I use CTRL + COMMAND + SHIFT + F3
If you are using ctrl-command-shift-3, then the screenshots are going to your clipboard and are not saved elsewhere. (I don't know about using F3 instead of 3)
If you are using command-shift-3, then the screenshots do get saved, with the default location being the Desktop. To look for the current location, download and run TinkerTool, and look in its General tab. You can use that section to alter the screenshot location; it may also tell you the current location even if it had been altered by another method.

Where is link between 0007 and 0008 infotype

Dear Members,
Where is link between 0007 and 0008 infotype.How the system automatically populating WORK HOURS/PERIOD AND CAPACITY UTIL .LEVEL.where is integration .
Regards
Nandhini

Hi,
>For your first question: Working Hours/Period field in IT 0008 is determined by the Planned Working Time infotype (0007).
>The Weekly / Monthly Working Hours field in IT 0007 are system determined the specified value from the work schedule rule. Capacity utilization level is related to Infotype 0008. The relationship is that an employees basic salary and its related components are stored here and are paid based on the working hours of the employee which is obtained from Infotype 0007 and multiplied by the capacity utilzation which under normal circumstances is 100 %. If the employee belonging to the same pay scale group and level works part time say half of the normal time, you can maintain his capacity utilisation as 50% instead of maintaining seperate values in the wage types.
Regards
Chandrashekar

Where is link for Offline installer, scepinstall.exe for latest version, curently 4.7.209 ???????

Where is link for Offline installer, scepinstall.exe for latest version, currently 4.7.209 ???????
I have looked for a link in the past for the scepinstall.exe file and it is always a MAJOR PAIN, if not impossible to find!!!!!!
Microsoft NO LONGER HAS AN EXCUSE FOR THIS LINK NOT EXISTING!!!!!!!!!
They have been told that it needs to exist and the logic for it is without error.
The ANSWER WILL NOT BE IT DOES NOT EXIST!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
There is NO EXCUSE FOR THIS NOT TO BE AN EASY TO FIND DOWNLOAD MICROSOFT, NO EXCUSE, except maybe laziness or greed, but no technical or legal reason for it not being made available, obviously!!!!!!!!!!!!!!!!!!!!!!!!!!
There MUST BE A PERMANENT LINK MAINTAINED BY MICROSOFT WHERE I CAN AT ALL TIMES GO TO DOWNLOAD THE LATEST GREATEST STANDALONE SCEP CLIENT AT ALL TIMES!!!!!!!
Today it would contain version 4.7.209. When the next version is release I will click on the same link and it will down load that new version EVERY TIME, NO EXCEPTIONS!!!!!!!!!!!!!!!
I have been able to capture, during an update the epplauncher.exe file and its accompanying folders etc, but that installer does not support any command line switches like the scepinstall.exe version for the client installer does. Needless to say that is
ridiculous and stupid and incompetent of Microsoft to do, but that is what they did so needless to say I need the SCEPINSTAL.EXE version of the client installer that supports the command line switches, x64 and x86 in one file, no need to program in a check
for that. And of course a link is absolutely required so that I can always find the latest version and I will never have to re-write my install script every time the install files changes, or a new version comes out, nor spend time trying
to capture the file during an update etc. etc. etc.
Also don't tell me to go to the SCCM administrator, because he doesn't have a clue as to where this can be found or even that it exist. (The link given in the forums for finding it on the SCCM server DOES not maintain the latest greatest version at all times
so that is also not the answer.)
I should also NEVER have to extract it from the SCCM updates such as "Cumulative Update 4 for ConfigMgr 2012 R2" which is where I found the 4.6.305 version a few months ago.
Thanks for the help, get your act in gear MS,
Ralph

Ralph,
You won't find a link to download as the SCEP update is treated as a Windows Update via ConfigMgr.
https://support.microsoft.com/en-us/kb/3036437?wa=wsignin1.0
You could join Connect and log this request with Microsoft by joining the Configuration Manager programme.
https://connect.microsoft.com/
You might want to lay of the exclamation marks when you do so, it would look a bit more professional.
Be aware there have been reported issues with the version of SCEP you are wanting to install.
https://social.technet.microsoft.com/Forums/forefront/en-US/2f597bc9-a686-4df2-b863-c28f18a3da2d/new-endpoint-version-causing-erroneous-virus-detections?forum=Forefrontclientgeneral
https://social.technet.microsoft.com/Forums/forefront/en-US/78d1d963-a74f-4a6f-8ff6-65d0b5a1516a/kb3036437-system-center-endpoint-protection-47-blocks-downloads?forum=FCSNext
Cheers Paul | http://sccmentor.wordpress.com

HH 4 & TP-Link nano router WR702N (bridge mode)

I wonder if anyone can assist. I am trying to set up the tp-link device as a bridge, however whilst my hub recognises it as a device within the home network devices when I try to connect to the bridge it doesn't work.
I have set up the bridge with a static ip and can amend the bridge settings accordingly from this. Having followed the instructions from various sources I'm at a loss as to what I'm doing wrong.
Any advice would be greatly appreciated.

Have you followed the manual supplied by tp-link
http://www.tp-link.com/Resources/document/TL-WR702N_V1_User_Guide.pdf

How do I find out where the link for a button points to?

I installed a Flash template that has a "Read More" button which is used in several locations of the site. The button corresponds to a single symbol called "button_more" and another symbol within that symbol called "area_more". It's a "Movie Clip" type of symbol, not a "Button" type symbol.
What I'm trying to figure out is where would I find the link to the page where that button points to - it points to different pages of the site depending on where it's located. For example, in the About Us section it links to a page that has more details describing About Us. In the Services section it links to a page that has more details describing Services. So the same symbol is going to different links.
I checked the Properties of the symbol and it doesn't have any option for a link. (I guess it's not really going to a link, but to a different frame in the timeline) But where would I find exactly where each button points to in case I want to edit one of them in the future, or create a new button with a new link?

No, the background color is not the same as any of the actionscript colors. It's a blank page, I can see that there's no code because it starts at line 1.
I figured it out though - when I go to the timeline manually, I am supposed to highlight the actual button. Then I see the code. Thanks for pointing me in the right direction...

Showing linked files in Adobe Bridge not available for files on AD Volume?

In Bridge: when right clicking on a local InDesign Document that has external links, the context menu will have an action "show linked files" (in german "Verknüpfte Dateien anzeigen").
But, when doing the same on an InDesign Document located on an Adobe Drive Volume, this context menu action is missing.
1. Can this action be enabled for documents on Adobe Drive Volumes at all?
2. If so, are there any special things to do in the connector plugin (e.g. special properties, a special mime type for the doc, ...)?
3. If not so, when will you enable this functionality?

Really, no answer?
This issue is obvious. And it seems to be the case, that only Adobe can rectify the issue at all, probably in an updated Adobe Drive version.
Or maybe, someone already dealt with this issue and invented special properties for exposing linked files to Bridge? Though unlikely... Right?
Any answer is welcome!

Where did Web Photo Gallery on Bridge CS5 go?

When I first installed Adobe Design Premium CS5 on my Windows PC, I was able to use Web Photo Gallery from Bridge. Now it is just vanished. I click on Output and the right panel, where Web Gallery options was supposed to appear, it's just blank. How can I get it back? Thank you.

Hi,
well previously it worked to get the reset window. However the reset did not help.
This time I didn't even get to the reset step.
I also tried to overinstall without previous deinstalling. Still had to update everything including the output module v. 2.1 No change.
New ideas that could help?
Thanks.

Where is link between plant vendor and plant code

Where i can find linke between plant vendor and plant code.

Hi,
Go to XK02,
In Purchasing Data of Vendor Master, in menu Extras > Add. Purchasing Data
It is stored in Table LFA1 and field is WERKS

Where the links/Announcements/Discussions stored in Km?

Hi,
I have a lot of Collaboration rooms and I create documents,links announcements and other useful stuff.
But I dont know where to look for these items in KM?
Regards
Rani A

Hi Rani,
1. All of the folders in room_extensions > cm_stores are predefined by SAP (unless you've created your own extension stores in the portal). Which folder(s) specifically your room creates its subfolders in (to contain all kinds of documents) is determined by the room extensions defined in the room template. To learn more about room extensions, visit the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/f2/3c9041eedda009e10000000a155106/frameset.htm">Configuring the CM Room Extension</a> SAP Help page. Again, this is configured at the room template level.
2. There are two reasons (that I can think of) why you may not be seeing any subfolders in the Announcements > workspaces folder: a) there may not be any rooms created with a template that uses the 'announcements' extension store, or b) you don't have access to the room(s) that are using the 'announcements' extension store.
3. Sounds like you have many rooms created with room templates that use the 'documents' extension store. If you don't see any items inside these folders, has any KM content actually been created in these rooms? Can you see this KM content if you go to the room directly?
I would recommend viewing the room template(s) being used to create the rooms, and take a look at the room extensions. That will tell you a lot about which extension store is being used to store the documents for the rooms.
Hope this helps,
Fallon

Mailto link doesn't recognise bridged blackberry.

When you come across a mailto link, clicking it opens up the OS2 integrated mail app, but it will not recognise a bridged blackberry to send the email.
Anyone know why this happens?

that is exact what also I want to know.

How to locate all content items where HTML link is missing?

We went through a brief period where Dynamic Converter was not producing the HTML link on new check in of content items. Now we have that fixed, but we need to identify those files that lack the HTML link so we can fix that. How do we locate content items that lack the HTML link?

Please find the URL which causes issue .
I am not able to invoke the dispatch action in struts.
/11/09 15:36:03 EFLBuilder: [instance=152748_BUILDERKIT_777946304, id=115210371784,4] ERROR: AbstractResourceRenderer.renderBody - Resource
"/seminarDetails.mcs;jsessionid=0ad16e5530d73bf00b218e744ea3b74adf8413a2ef58.e34RahmKa3mRay0Lc3aKbhiLbxaKe6fznA5Pp7ftolbGmkTy?Menu=customer&'amp;actionCmd=seminarDetails
Regards
Prem

Can anyone tell me where the links to "Manage Your Websites" moved to from the menu where I view my creative cloud files?

Does anyone have a link? I am used to going online to manage my websites, and make appropiate changes right in the browser with the service. Where did you go!!! Ohh No!!

Wow, I'm very sorry for posting that, HAHA, or even asking. After about 25 seconds, I realize you would just enter in the browser your web site address followed by /admin example www.mysite.com/admin Silly me... I love you Adobe :-)

Where is link to Drupal DPS Bridge?

Similar Messages

Maybe you are looking for