Where is log of user logon and log ff in WCS or WLC?

My configuration is 4404 WLCs with WCS. We have a guest WLAN configured and the users authenticate using Web Auth and local accounts created by a Lobby Ambassador. My question is if there is a log somewhere that records when users logon and logoff when they are authenticating to local accounts.
Thanks,
Deanna

I am also looking for the same information in my syslogs. I have increased the logging level to info and user ID is still not there. Does anyone know how to get user ID information out of the syslog?
Thanks

Similar Messages

  • GPO Run these programs at user logon not taking effect when configured in Computer Configuration section

    [EDIT 20140207]:
    I found that the default domain policy sets "run these programs at user logon" and (other than I expected) not BOTH GPO settings become active, but the setting from the default domain policy overrides the setting from my new GPO. So I think I have
    found the answer myself.
    When on our W2k8-R2 DC I create a new GPO and configure
    "Computer Configuration/Policies/Windows Settings/Administrative Templates/System/Logon/run these programs at user logon" to "c:\windows\system32\notepad.exe" (just for testing) it won't take effect on Win 7 SP1, no matter what the Security
    Filtering options are.
    It seems other settings (in the very same GPO) become active but "run these programs at user login" from the computer policies section doesn't. I configure the very same setting in the section "user policies" instead and add "Authenticated
    Users" to Security Filtering, the program will be started. But that's not what I need.
    I can reproduce the issue, here are the exact steps:
    create a new group "group-a" for later security filtering
    create a new GPO
    in the new GPO set "Computer Configuration/Policies/Windows Settings/Administrative Templates/System/Logon/run these programs at user logon" to "c:\windows\system32\notepad.exe"
    for setting the scope remove "authenticated users" from Security Filtering and add "group-a" instead
    link the GPO to the domain root
    make "test computer" a member of "group-a"
    on "test computer" run "gpupdate /force", reboot, log in
    Issue: notepad is not being started.
    What I'm aiming for is obvious: Depending on the membership of group-a I want to configure certain programs that should be started whenever a user logs in.
    gpresult /R returns that it would be applying the GPO. (It actually is but the setting "run these programs at user login" is not being applied.)
    For debugging I started MMC / RSoP on one of the machines on which the GPO should have been applied and found that "run these programs at user login" is not set (which seems to be the reason why the GPO won't work on the machines).
    Searching the web I found similar reports
    [1] [2] but no solution was found and the user used a workaround instead.
    If I change the GPO so that I use the very same setting in "user configuration" instead of "computer configuration" it works as long as I add "authenticated users" to the Security Filtering. But then the GPO is applied to all users
    and not only to the ones using computers which are members of group-a. According to this howto [3] I should not remove "authenticated users" but alter the security setting instead. However, the howto seems to be aimed ad w2k3 and using Win2k8 I cannot
    find security settings "apply" for "authenticated users" so I cannot remove that setting, there's only "read" or "read and modify".
    So two questions:
    1. Why doesn't it work when using "computer settings"
    2. What about that Security Filtering with removing "authenticated users" and using group-a instead?
    T.
    [1] http://social.technet.microsoft.com/Forums/windows/en-US/0e280490-fba6-4ced-aba5-ae49c60e44bd/computer-gpo-run-these-programs-at-user-logon-not-working-as-intended-on-win7-clients?forum=w7itproinstall
    [2] http://social.technet.microsoft.com/Forums/windows/en-US/8cb78bf8-33ec-461e-8604-32d82d016685/run-these-programs-at-user-logon?forum=winserverGP
    [3] http://www.grouppolicy.biz/2010/05/how-to-apply-a-group-policy-object-to-individual-users-or-computer/

    Hi,
    sounds like you find the answer already.
    If you have any further question, please feel free to let me know.
    Have a nice day!
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

    I am able to run the report fine in BIDS in the preview window, and it deployes fine.  When it goes to view the report in the browser, I get the following error.  There is no domain, I am using a standalone computer with SQL Server and SSRS on
    this one machine.
    Can anyone point to where I might configure the permission it is looking for?  thanks!  Steven
    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect
    Steven DeSalvo

    Hi StevenDE2012,
    Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
    Configuration is not correct.
    Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
    a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
    to other computers. To configure the account, please refer to the following steps:
    Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
    On the Execution Account page, select Specify an execution account.
    Type the account and password, retype the password, and then click Apply.
    In addition, please verify you have access to the Report Server database by following steps:
    Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
    Go to Database, Verify that you can connect to the database.
    Make sure you are granted public and RSExecRole roles.
    Reference:
    Configure the Unattended Execution Account
    Configure a Report Server Database Connection
    If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    Logon failure: unknown user name or bad password 
    am using Windows integrated security,version of my sql server 2008R2
    I have go throgh the different articuls, they have given different answers,
    So any one give me the  exact soluction for this problem,
    Using service account then i will get the soluction or what?
    pls help me out it is urgent based.
    Regards
    Thanks!

    Hi Ychinnari,
    I have tested on my local environment and can reproduce the issue, as
    Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
    Please also find more details information about when to use the execution account, if possible,please also not specify this account:
    This account is used under special circumstances when other sources of credentials are not available:
    When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
    When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
    Execution Account (SSRS Native Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

  • TG797n v3 log on to 10.0.0.138 User name and Password for wireless set-up

    I have a TG797n v3 on Windows 7 to a Dell XPS via ethernet cable. Has been working fine, but. . . just aquired an iPad Mini for family use.When trying to configure the iPad Mini, I can't get past the log in requirements of the "found" wireless network. My laptops read it OK but the iPad keeps asking for a Password for the Telstra***** wireless network. I have tried every conceivable password I have ever used without success.I tried resetting the TG797, (by switching off the power for 1 minute, and pressing the rest button for 20 seconds, and leaving the power on and pressing the re-set button),and now it is asking for a User name AND a Password to enable log in to 10.0.0.138. I can't even get to the set-up page anymore!! I have re-installed the software from the CD that came with the T-gateway, but at no stage does it ask for a password. It asks for the SSID and the Wireless Key, but nothing else! and connection to the internet is established.(Otherwise I couldn't type this, could I?) So, where, and how, do I either retrieve the Password hidden in the TG or reset the password the iPad is looking for???I have configured the TG797 by disconnecting and re-connecting (no passwords asked for) I have searched all the Help topics and they ALL say " Just enter your User name and Password" . . . yeah, great if you can remember it or even resetit!!  Please, someone, there must be a simple (or complex) answer as a solution. Thanks in advance, Ian King.   (Telstra help, . . . anyone?) 

    Hi dumbojojo, 
    Im sorry to hear that you are having difficulties, 
    The password you need is located on the underside of you modem unless you have already changed it yourself. It will often be listed as a WAP PIN.
    If this doesnt help please see here Change wifi password or here  WiFi Troubleshooting
    Finally, you are still having issues, please contact support on 133933 or Live chat here http://tel.st/hsc3
    Regards - 

  • You must supply a valid User Name and Password to log onto the system

    he installing Hyperion 9.3.1 on a server, I installed and tested successfully Shared Services, Essbase Administration Services, Essbase Server, Essbase Client ........ my problem is when installing Reporting and Analysis
    Services and installed without problems UIServices in confuguratio utility comes a list of products to configure (Financial Reporting, Web Analysis Planning .... .... among others), first configure Financial Reporting and Web Analysis, when done reboot the machine, then wake up coughing the service entrance to http://localhost:45000/workspace, correspontiente and I get this message "you must supply a valid User Name and Password to log onto the system"
    I need an urgent solution k and the above does not work until the time
    or failing to address where we can solve this

    Hi,
    First of all really you should be going through the webserver plugin port if you want to access the other components through workspace.
    e.g. http://localhost:19000/workspace
    If you entering the correct login details and the account you are using is provisioned then you could check out what information is in the logs :- \Hyperion\logs\BIPlus\SharedServices_Security_Client.log
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Invalid User Name and Password when logging onto BPM Workspace (v9.3.1)

    I have installed Hyperion Planning and the related/required products. When I attemp to log on to Workspace, I get the following message;
    'You must supply a valid User Name and Password to log onto the system."
    I have tried using the native 'admin' account, and an NTLM account that I have setup. Both of these accounts work for logging onto the the User Management Console and to the Essbase Administration Console, and I have provisioned both of them with full admin privileges.
    Has anyone encountered this issue?
    Thanks,
    -K

    Thank you all for the responses so far.
    On the first response, I had already provisioned an NTLM user that is a member of the local Administrators group with all administrative roles, and also refreshed security in EAS prior to submitting this inquiry, so that did not solve the problem.
    On the second, I cannot navigate to ../workspace/browse/configinfo without logging in so I am unable to review this information.
    On the third response, where do you provision the user to BI+? If I open the User Management Console, there are four root roles each with a tree underneath: APS 9.3.1 Server, Analytic Servers, Business Rules, and Hyperion Shared Services. Under each tree, I have provisioned the 'admin' user and the NTLM user for all roles, including Administrator, Dimension Editor and Application Creator under Hyperion Shared Services -> Global Roles. Should there be a BI+ tree? If so, it is not appearing on the list.
    Thanks for any additional info anyone can provide.
    -Ken

  • Log on the other computer with user name and password

    How to use labview to write a software to log on the other computer with user name and password?

    Jimmyzeng wrote:
    Nobody can help on this?
    Besides repeatedly asking the same question in thread after thread, you are not providing enough information to answer the question. You have been given answers already stating that operating systems do not make this very easy to do using programs for security concerns. In addition, the authentication process varies depending on what service you are communicating with. You really need to provide more information if you want to get meaningful answers to your questions.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • I receive an error stating user name and password are not valid on my ipad and iphone 3Gs when attempting to load email from my icloud account. When I log onto icloud from my Mac, it wont load the email either.

    One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?

    I am having the same problem; it started about 24-36 hours ago.
    I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
    iPhone -- returns incorrect ID / Password
    iPad -- Same
    Mail.app on Mac -- returns incorrect password error
    icloud.com -- allows me to log in and use all functions accept mail.  When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
    I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode.  They generated a new strong password and sent it on to "Engineering."
    I suspect there are a small number ofo users like you who are affected with the same problem I am.  Too small a number for it to be reported as an outtage.  I suggest you call Apple and open a case to have your mail investigaged.
    Hope this helps...

  • Autocomplete suggests my user ID and date of birth on the log in page of my savings account - how do I stop this?

    For the most part autocomplete is really helpful. However, when I log in to my savings account, my user ID and DOB are suggested, allowing anyone on my PC to view my account (a security code is required to carry out any transactions which does not appear to be autocompleted!) - how can I switch this off please? This has started since I reset Firefox (due to slowness, as recommended by Firefox). Thanks.

    Thank you jscher2000: all fixed now!

  • HT4314 I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

    I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

    I have the same problem.. EXACTLY. .  When phoning Apple Support they had trouble understanding my problem and couldnt find any type of solution. No one seems to take responsibility for GameCenter issues. The assistant escalated the problem but no one could find an answer. .
    The only idea was to set up a new apple id, hence a new GameCenter account. . But that would loose all the itunes data. Anyone got ideas ?

  • New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

    New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

    The built-in guest user account will not do this. Simply create a new standard account and call it "Guest" or "Guest Users" or whatever you like.
    Go to System Preferences > Users& Groups, click "+" to make a new account.

  • Hi,  Trying to log in with my user id and password at iocbc but was not able to access. Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting  Anyone can advise? or i need to download?

    Hi,
    i have the same problem?
    Trying to log in with my user id and password at iocbc but was not able to access.
    Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting
    Anyone can advise?

    You need to install Java for your Mac OS version, and/or make sure it's enabled in the Java Preferences application and your browser's preferences.

  • Audit log of the User access and permissions

    Hi All,
    We need to have the Audit trail of the user access and permission. Meaning Changes to user access rights will be logged.
    This should include:
    Current Access Rights (including Date the access was given),
    Group membership (including Date the access was given),
    Previous Access Rights (including Date the access was given and revoked).
    Can we reuse any out of the box functionality of CQ. Does anybody having any pointer to this?
    Thanks,
    Debasis

    Hi PChamoun,
    At the outset thanks a lot for the clue. I am very new to CQ. Could you please guide me like, what are the API required to track the rep:policy node changes. Even if workflow will be started after any change to rep:policy but how I will be able to get the information of what change happened.
    Thanks,
    Debasis

Maybe you are looking for