Where is mail data stored in 10.9.4? Mail works fine, but there is no data in Users/Library...?

Where is mail data (all messages) stored in 10.9.4?  Mail works fine, but I cannot find the data to back it up. It is NOT in Users/Library..(In fact, my User folder has no Library folder at all)..?

Exposing the /Home/Library/ Folder
Pick one of the following methods:
A. This method will make the folder visible permanently. Open the Terminal application in your Utilities folder and paste the following at the command prompt:
chflags nohidden ~/Library
Press RETURN.
B. Click on the Desktop, press the OPTION (⌥) button, select Library from the Finder's Go menu.
C. Select Go To Folder from the Finder's Go menu. Paste the following in the path field:
~/Library
Press the Go button.
The data are in your /Home/Library/Mail/V2/ folder.

Similar Messages

  • My iPhone does not notify me of calls in Voice Mail. I will see that I missed a call but there are no messages in VM. Cellular data is off - only voice roaming. Suggestions?

    My iPhone does not notify me of calls in Voice Mail. I will see that I missed a call but there are no messages in VM. Cellular data is off - only voice roaming. Suggestions?

        DJTayLo, Let's get your voicemail working! I noticed you metioned that your Cellular Data is off. Visual Voicemail does need to be connected to Cellular Data in order to retreive voicemails for the iPhone. This can cause the notifications to be delayed. When you turn Cellular Data on do the notifications  then show correctly? Which model iPhone do you have? We'll figure this out.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • Suddenly, I am unable to add photos to my project in Imovie 11. I have an IMac Snow Leopard 10.6.8 and have made several movies where this worked fine but for some reason, it has quit. Everything seems to be working fine except that?

    I'm an oldtimer and have had this Mac for less than 2 yrs and have LOTS to learn - but I've climbed the curve a little.  !'ve made several movies and published to YouTube and burned to disc using IDVD with reasonably good results. Each time I have added stills to my movies it has worked fine - but tonight, I'm suddenly unable to add them. I click "Photos" -     select my photo - left click the photo and drag into the project while holding the click. Have the green "+" and the green highlight and even get the green vertical bar in the project but when I release the click, the photo simply disappears!  One "clue" here may be this:  I was able to add one still to this project and the only diff between it and the other still thumbnails now is that there is a "green check mark" on the thumbnail of the one successfully added.  Any suggestions?  (I do have the "advanced tools" option selected in IMovie Preferences.)
    Thank you so much for any help at all.
    Sam

    Hi
    My first thoughts are
    • iMovie ill behaving - Trash the iMovie pref file - use to set things right
    • in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
    Yours Bengt W

  • I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

  • Synchronization from SLD to LMDB is working fine, but data is not written to Software == Product Instance

    Dear Gurus,
    Synchronization from SLD to LMDB is working fine, but data is not written to Software ==> Product Instance section tab. What could be the problem ? Normally it should gather automatically, but pushed me to select manually lots of component ???
    Here is collecting is working fine !!!

    Hello Kemal,
    You have to ensure that your Technical System info is properly filled automatically.
    In LMDB you first create its Product System on LMDB Start Screen ProductSystem tab, after that please assign its respective Technical System. You probably need to run the Verification Check in order to confirm that your Product System has all Product Instances according on Technical System's Software Component Versions.
    Regards.
    Luis Roel

  • ICloud full but there are no data to restore

    my iphone was crased and I lost all data on that device.
    I want to restore it but, there are no data from iCloud to restore.
    iCloud show me that there are usage 5GB, but there are no data.
    help me please.
    thanks in advance.
    best regards,
    Amatus

    If you need to restore an iCloud backup, this explains how to do so: iCloud: Restore your iOS device from iCloud.

  • I have a I phone 4. I recently changed carriers to straight talk it was working fine but I deleted the vpn file on accident. Now I can't get cellular data. Does anyone know how I can reinstall that file or download it somewhere?

    I own a I phone 4. I recently changed my service from AT&T to Straight Talk. It was working fine but then I deleted the vpn file on accident. Now when I try to get on line I get a message that I am not signed up with a cellular data network. Does anyone know how I can retrieve or download the vpn file?

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • Yahoo mail account drops out randomly. I have 2 yahoo mail accounts on my Mac. The primary account works fine but the second account loses connection.

    II have 2 yahoo mail accounts on my Mac. The primary account works fine but the second account loses connection. When I put in the password I get a message that it is not the correct password. The only way round it appears to be to go into Yahoo on Safari, log out then log bck in again. If I then go back into Mail and right click on the account I cn then get mail for this account without having to enter a password. The problem only started when I installed Lion, but is still the same in Mountain Lion.

    Welcome to the Apple Community.
    Enter the details of her second account at system preferences> mail, contacts & calendars.

  • I am transmitting data over internet and WiFi ,it's working fine with internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi?  Please help me.

    I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi?     Please help me....
    Thanks in Advance.
    Neeraj@iDev

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • HT3819 My new Apple TV works fine but turns off Home sharing at regular intervals. This requires me to re-enter my itunes password and start over again. It is not my computer. I've checked and home share is still on in itunes. Any advice on where I should

    I just installed Apple TV. Works fine but turrns itself off at regular intervals of about 30 minutes. This requires me to re-enter my Apple ID and re-start all over again. Wjen I check iTunes on my computer, home sharing is still turned on. THis leads me to think the problem is in how I configured Apple TV on my HDTV. Any advice on where I should look?
    THanks in advance.

    I have had no luck. After an hour with phone tech support I have re-installed the current Apple TV software update., re-booted the entire system three times., checked each of my two Airport Express's.,unplugged and re[plugged in every cable,  ad infinitum, ad nauseum and still no luck. I have also decided iTunes 11 *****. Not near as intuitive especially with regard to moving stuff around between my playlists, etc.
    Alright guys, is this a problem because of iTunes 11? Is Apple releasing stuff before adequate debugging? Did Steve take his high standards with him?

  • Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blue yonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

    Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blueyonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

    And, you are sure you have provided the correct username and password for you email account? I'm not familiar with Virgin media, so you might contact their tech support to find out why you are having a problem sending mail but none receiving mail. I assume your mail account has always been POP3 and not IMAP. Typically, the outgoing mail servers are not the same for the different types of account service.

  • Hi, I purchased Acrobat Standard XI and received a mail thatthe order has been processed. Installation was fine, but I didn't receive the serial number.

    Hi, I purchased Acrobat Standard XI and received a mail thatthe order has been processed. Installation was fine, but I didn't receive the serial number.

    If you purchased a subscription, there is no serial number. Sign in with your Adobe ID to license the software.

  • Mail appears to work fine but no email is downloaded.

    Something very weird is going on with my Mail. I installed Leopard about two days ago and everything was working fine, but then suddenly I noticed I stopped receiving e-mails.
    So I checked in my webmail and there were loads of new e-mails, but these are not coming through to Mail.
    It's not related to any account settings I believed because I got 5 different accounts on Mail (from different providers hence different settings) and none of them are receiving e-mails.
    The weird thing is that I am not getting any errors, everything seems to be working ok.
    Any clues will be appreciated.
    Thanks.
    Diego

    I'm having the same problem. If you open the Activity Viewer (the window, not the pane at the bottom of the sidebar which never seems to show anything helpful), there is generally a message about ‘Copying…’ a certain message (one of the most recently-received messages).
    I try to quit Mail and although the window closes, the application doesn't quit (still the light on the Dock). So then I have to force-quit the application (by option–right-clicking on the icon on the Dock) before it will deign to receive any more mail.

  • TS3992 My Icloud back up shows huge amount of data stored from back up yet listed as incomplete. Unable to access data. Is data lost

    My ICloud backup shows a huge amount of data stored, yet it is listed as incomplete backup. I am unable to access the backed up data. Is the data lost?
    Thank you in advance for your assistance.

    Unfortunately, if an iCloud backup is incomplete you can't access any of the data in it.  The only way to access anything in the backup is to restore the entire backup, which can't be done if it is incomplete.

  • When using Time Machine in Mac Mail, everything works fine but restored files do not appear in MM - On My Mac, and I cannot find them anywhere.  Thanks

    Time Machine Problem: Mac Mail.  Cannot Find Restored Files in Mac Sidebar where they are supposed to go.
    I am using Mountain Lion on my MacBook.  I have successfully used Time Machine in the past, but I have incurred the following problem that I am requesting help on.
    I am attempting to recover Sent  and Inbox Mac Mail sent.  I go through all the steps properly and locating what I want to recover, and after hitting Restore everything seems to be working and I get a message "Restoring 207 files".  The guides say that then I am supposed to find the files in Mac Mail sidebar under   ON MY MAC.  But they are not there nor anywhere else I have looked.  In other words, everything appears to be working fine except I cannot find the restored files.
    Thank you for you help.
    Jerry

    Although you can restore messages from a Time Machine snapshot within the Mail application, it generally won't work with messages that were saved by an older version of Mail. In that case, you have to use an alternative method.
    Triple-click the line below to select it:
    ~/Library/Mail/V2
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a folder selected. Inside that folder are subfolders representing your Mail accounts. The names refer to the email addresses you use. Decide which ones you want to restore messages from.
    Enter Time Machine and scroll back to the snapshot you want. Select the account folders you want and then selectRestore ... to... from the action menu (gear icon) in the toolbar of the snapshot window. Restore the folders to the Desktop, not to their original location.
    From the Mail menu bar, select
    File ▹ Import Mailboxes...
    Import from the mailboxes in the folders you restored to the Desktop. The imported messages will appear in a new mailbox. Move the ones you want to keep wherever you like and delete the rest. Then delete the folders on the Desktop.

Maybe you are looking for

  • Extended notifications problem

    Hi experts, I am trying to configure extended notifications for around 7 to 8 different taks pertaining to different workflows. I could successfully do it for 1 task. Then after successful testing I did add more filters to the same configuration unde

  • How do I link a drop down menu with product pictures?

    I wan to have  a product picture and then have a drop down menu to choose the color, so when I select the color in the drop down menu the product picture chages to its corresponding color, is this possible? Or is there an alternative way?

  • How to save an XML file with a proper name and how to maintain the history?

    Hi All, As per the requirement, I have to remane the name of the XML file which is under the KM repository Userhome/personaldocuments based on the user logon information. I have created a Repository service for the same and following is the code for

  • Error when including hierarchical column in repot

    Hi All, I am getting following error [nQSError: 42039] Columns in BY clause of REPORT totalling function must be in select list. (HY000) when i include the Hierarchical column, Is it something i should set for it. Thanks, Sreekanth

  • Mapping Multiple VLANs to Multiple SSIDs as one-one in WLC 5508 via H-REAP?

    Hi All, Can anyone please show me how to map a SSID/WLAN ID to a local vlan of a LAP in WLC 5508 using H-REAP local switched? The reason of doing this is to separate Data subnet/traffic from Voice as currently all 7925 handsets using same SSID as PCs