Where is my bundled software?

I purchased a new computer just before Christmas and the box reads that Photoshop and Premiere Elements are bundled with it.  Neither one is on my computer so how do I GET THIS SOFTWARE?

As John said, contact the OEM vendor. Perhaps you simply need to register your machine on their web site with the serial/ build number and then download your stuff from there...
Mylenium

Similar Messages

  • Elitepad: Where can I re-downloa​d the bundled software that came with my device?

    I have an Elitepad 900
    I just did a system restore and noticed that the flash on my camera will not fire.
    I realize that I don't have any of the bundled software like "Cyberlink YouCam" that came with my device anymore.
    Where can I download these? Is there a place where I can get a restore disc for my device?
    Thanks
    This question was solved.
    View Solution.

    Didn't know but the software I was looking for was on the Windows Store.

  • ILife "Bundled Software Cannot Be Installed" on Leopard Upgrade Error

    I had to do a clean install of Leopard after the installation stopped midway through the first time. It was successful the 2nd time.
    Ilife was of course missing so I put back in my Tiger install disk that came with the computer (2.16 GHZ Mac Book Pro 17", 2GB 667m DDR2 SDRAM) clicked on "Install Bundled Software Only" to get ILife and I get the error "Bundled Software Cannot Be Installed on this computer. Make sure your system meets the requirements"
    How do I get around this?
    What could be causing it?

    I think I did the Erase and install.
    Basically I tried to upgrade to Leopard. The upgrade did not work and got stuck in the middle. I was worried about getting everything off my hard drive. I was able to remove the files I wanted but then when I put back in the disk to do the install I had to do the option where it would erase everything on the disk.
    So that is why I'm confused as to why it is saying I can't put ILife on leopard.
    It seems like everything should be ready to go.
    Would it make a difference if I'm using my twin brother's installation disk instead of mine? I never thought of that until now but our disks are all in one spot and I could have grabbed his but I doubt that's the problem.

  • Missing Bundled Software?

    Hi,
    iLife '08 was installed on my new iMac but when I reinstalled OSX I could not locate where iLife was to reinstall it since it was not part of the 'bundled software' install. Am I missing something?
    Cheers

    Hi DavidPayne;
    Have you looked on the original install media for your Mac?
    Allan

  • Nx pro - bundled software

    Where can I get the bundled software that came with my camera (NX PRO)? I lost the disk, but would like the utility that let's you take snapshots.
    Can anyone please help?

    Hi.
    Had same problem myself but I think I found an application that works on their support pages.
    Support - Software - Creative webcam monitor version 2.06.04
    Good luck.

  • New hard drive just fitted ,shop loaded snow leopard 10.6.8 ,read on here i could retreive iphoto by installing bundled software on original install disk,just says cannot load on this computer why? please!

    new hardrive just fitted by shop ,they loaded leopard 10.6.8.
    i read on here that i could reinstall iphoto by going to install
    bundled software on original install disk .
    it will not let me install bundled software on this computer
    any ideas why??
    thanks fo yo support

    No
    What hppens? what does not happen? what version of iPhoto did you have? What error messages do you get?
    LN

  • Can't install OS X bundled software on external drive

    I am building a bootable external hard drive. I installed the operating system (Snow Leopard) successfully using the computer specific installation disc that came with the system. However, when I have attempted to installed the bundled software (i.e. Garageband, iMovie, etc.) I get an installation failed message just describing an unknown reason.
    Does the hard drive have to be the main drive for this bundled software package? That would not make sense because you can get the OS on an external drive and one objective for doing it is to have a fully working clean installation available to utilize.
    "The Installation Failed
    An unknown installation error occurred.
    The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance,"

    The operating system boots from the drive without any problem.
    The formatting is GUID & Extended Journaled.
    I tried making a disk image and received the same error.
    I ended up searching my main system drive for all related files for each program installed and manually duplicating the folder structure then copy/pasting the files in the external drive. I was successful in getting everything to run off the new drive.
    It is frustrating that an answer to this problem does not pop up online after a search. It has to be a common problem when people attempt to create a bootable external drive loaded with software.
    FWIW, I did not want to do any sort of cloning. I wanted a fresh installation. Fortunately the software from the bundle that is currently installed on my original main drive is healthy as far as I know. If I needed a fresh installation of it I would not have been able to use this approach.

  • Where to find iPhone software after install lion

    Where to find iphone software, after insatll lion on imac.
    It was easy to find on snow leopard.

    Hey.
    I found it. Way easy than snow leopard.
    Finder must be open.
    option click (alt) on the menu.
    It show it self under, when you click on to the go to menu.
    Of couse i meant on lion 10.7 and not on 10.6.7

  • Where can I get software for my Canon laser printer D420? I didn't think I would need it for an iMac

    Where can I get software for my Canon laser printer D420? I didn't think I would need it for an iMac

    HI wvpearson.
    You can download the Mac OS X drivers for the imageCLASS D420 from the Canon USA website.  Please click the link below:
    imageCLASS D420 - Drivers & Software
    Once you are at the site, your operating system will be automatically detected.  Select DRIVERS and download the files listed.
    I hope this information is helpful to you.  Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).  Have a good day.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Bundled software for 10.4, no install disks

    I am currently living abroad in China, and have left my install disks back in the states. My computer had crashed and was serviced under warranty, receiving a new hard drive, when it was returned for me it had not been installed with all the bundled software, such as iphoto.... Is there anyway I can get these programs without having to have a friend search my house for the disks and mail them out to me?

    Yes I have considered that, but unfortuneatly they do not speak English and my Chinese is not all that great. My roommate has a powerbook G4 but unfortuneatly because mine is a 12 inch his disks wont work, his computer is a 15 inch which disks work for both the 15 and 17 inch. Perhaps I will be able to find someone out here with a 12 inch

  • ImageClass MF5770 with PageManager Vs 6.03 bundled software.

    I have an ImageClass MF5770  multifunction machine with NewSoft PageManager Vs 6.03 as bundled software. Lately, this software will not open and displays an error message of  "Failed to create empty document". I have contacted Canon by eMail and today by live discussion on the phone. I have also contacted NewSoft but due to its age, NewSoft will not help. The call to  Canon Live Support today simply told me that there is nothing that can be done. How can a reputable firm sell and deliver a product that suddenly stops working and then tells the customer that nothing can be done to repair it? Has anybody else have this problem and if so, how to repair it? 

    I have an ImageClass MF5770  multifunction machine with NewSoft PageManager Vs 6.03 as bundled software. Lately, this software will not open and displays an error message of  "Failed to create empty document". I have contacted Canon by eMail and today by live discussion on the phone. I have also contacted NewSoft but due to its age, NewSoft will not help. The call to  Canon Live Support today simply told me that there is nothing that can be done. How can a reputable firm sell and deliver a product that suddenly stops working and then tells the customer that nothing can be done to repair it? Has anybody else have this problem and if so, how to repair it? 

  • Is Front Row part of the 'Bundled Software'?

    With the Leopard update disk I got when purchasing my Mac Mini in February, is there an option to reinstall just the bundled software, without being forced to reinstall the entire OS?. Is Front Row part of that bundled software package?

    Angloswede wrote:
    With the Leopard update disk I got when purchasing my Mac Mini in February, is there an option to reinstall just the bundled software, without being forced to reinstall the entire OS?.
    bundled software means ilife ( iphoto, imovie, garage band, iweb and idvd). Is this what you are talking about? ilife is not part of leopard so it wouldn't be on the leopard upgrade DVD. if you want to reinstall it you need either a separate ilife DVd if you bought it or the original Tiger install disks that came with the computer. Insert the tiger disk, open it in finder and double-click on 'install bundled software only". this will reinstall ilife.
    Is Front Row part of that bundled software package?
    no. Front Row is part of the OS itself. you can reinstall Front Row fromthe leopard install DVD using [Pacifist|http://www.charlessoft.com>.

  • Where to down load Software or driver for NI PCI-8430/16 (RS232)

    where to down load Software or driver for NI PCI-8430/16 (RS232)

    Try here:NI-Serial 4.0
    I just did a search from ni.com for "ni-serial download" and that was the first link.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

    I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

    I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
    It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

  • I have an attachment to my iPod Classic that allows me to record. However, when the hard drive died on my last computer I lost the software that allowed me to transfer files for burning CD's or email, etc. I don't remember where I got the software and the

    I have an attachment to my iPod Classic that allows me to record. However, when the hard drive died on my last computer I lost the software that allowed me to transfer files for burning CD's or email, etc. I don't remember have an attachment to my iPod Classic that allows me to record. However, when the hard drive died on my last computer I lost the software that allowed me to transfer files for burning CD's or email, etc. I don't remember where I got the software and the package with the instructions is long gone. Anyone know where to get it?

    What is the make and model of this recorder?  Do you have that information available?
    You can still use iTunes to transfer and manage your recorded audio.
    iPod: Recording voice memos
    B-rock

Maybe you are looking for