Where is my deks top and my dash board

at the bottom of my screen i used to have my desk top icons and clock and volume control, time of day and connectivity info,now its gone . how do i get it back

Is the Windows Taskbar still visible when you boot the computer?
If not the try to pull it up by putting the mouse pointer at the bottom and drag it up with the left mouse key pressed.
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen

Similar Messages

OMS and STNC Dash board

Hi
Can anyone have worked on OMS and STNC Dash board?
If does please brief me on those topics.
Thanks in advance

Is the Windows Taskbar still visible when you boot the computer?
If not the try to pull it up by putting the mouse pointer at the bottom and drag it up with the left mouse key pressed.
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen

I'm trying to set up my phone with the ios7 software. After agreeing to the terms and conditions it took me to a screen where it has one dot and four dashes (they are aligned to kind of look like a pass code) it's been stuck on this screen for four hours.

Can anyone help?

I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

When i take a partial screen shot i do not know where it goes, when i take a partial screen shot i do not know where it goes because it dose not go to my desk top and i cant find it in the search thing... but i can hear it being taken

when i take a partial screen shot i do not know where it goes, when i take a partial screen shot i do not know where it goes because it dose not go to my desk top and i cant find it in the search thing... but i can hear it being taken

an oh! one more thing, you can change the default folder or create a new one to store all screenshots. Also you can change the file format. Look at the following links
http://hints.macworld.com/article.php?story=20050824073301844
http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X

I accidently closed the area where u add the website at the top and now i cant figure out how to show it again so i can type n a different web address

I accidently closed the are where u add the webiste at the top and now i cant figure out how to unhide it so i can type in a different web address

In the menubar, Safari > View > Show Toolbar.
Regards,
Captfred

How to suppress blank line in top and end of portlet

I created one small report (portlet) however when i execute this one; i remarked there is one blank line in the top
and another one at the end of the report. How can i eliminate these lines. I need this space to be able to see
a lot of information in the same page.
I use portal 3.0.9.2

After developping a lot of portlet and read a lot of TAR on metalink and a lot of message on OTN i discovered the solution.
Wnen you create one report with the wizard there is no way to erase the first line ( header ) in the result.
Second for the last line of the results ( blank line ) ; the problem is with netsacpe 4.75 ( no problem with internet explorer )
with Netscape you will see one blank line and not with internet explorer ( confirm with Oracle support )
Anyway in the place of developping one report with the wizard ; you can copy and paste your sql statement of your report
inside one dynamic page and control all you want.
I will give you one example than i created; i hope it will help other persons like me
( we need to read a lot of thing to do something really simple with portal )
<HTML>
<HEAD>
<style type="text/css">

</style>
</HEAD>
<BODY>
<ORACLE>
begin
htp.p('<table cellspacing=0>');
for c in ( select '<a TARGET="_blank" HREF="http://'||ssdw_portal.pkg_globl.
fnc_get_server_port||'/pls/portal30/docs/FOLDER/SSDW_AIDE/'||replace(item.name,
' ','+')||'">'||item.display_name||'</a>' filename , to_char(item.updatedate,'dd/mm/yyyy hh24:mi') last_updated
FROM portal30.wwsbr_all_items item ,
portal30.wwsbr_all_folders folder
WHERE folder.name = 'SSDW_AIDE'
and folder.caid = item.caid
and folder.id = item.folder_id
and item.language = 'us'
and item.name like 'GUIDE%ANG%'
order by item.name ) loop
htp.p('<tr>');
htp.p('<td bgcolor=#CCCCCC width=325>');
htp.p('<font class="TabFontText" >');
htp.p(c.filename);
htp.p('</td>');
htp.p('</font>');
htp.p('<td bgcolor=#CCCCCC width=125>');
htp.p('<font class="TabFontText">');
htp.p(c.last_updated);
htp.p('</td>');
htp.p('</font>');
htp.p('</tr>');
end loop;
htp.p('</table>');
end;
</ORACLE>
</BODY>
</HTML>
Marc Fortin
[email protected]

Can you trim top and bottom black from videos?

Hi
I have a project where I need to make all my video clips the same height.
Some of the clips are in widescreen, and I'd like to trim the black from the top and bottom so that I maximise the height of the footage.
Can this be done in elements, and if not, are there any programs that you can do that in?
Thanks for your time and help.
Shaun

John,
Glad that you found it. I use it constantly, as I often animate my Titles with Keyframed Effects, and will just Copy/Paste Attributes to all. Same for Effects that are common to multiple Video (or Audio) Clips.
One caveat: when planning on use it, do one Clip with the complete Effects line-up, then Copy. Select all other Clips that you wish to Paste Attributes to. If you have already added some Effects, beyond the Fixed Effects, you will get multiple instances of that/those Effect(s), i.e. if you have already added Color Correction to the destination Clips, an have Color Correction in your source Clip, you will likely get 2 instances of Color Correction. Plan ahead, so that you do not have to go back and Delete any duplicated Effects.
Good luck,
Hunt

My computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings and even went to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple

my computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings, all of their diagnostics, and they even sent it to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple, especially iPhoto which is seems to refuse to load and then begins freezing up all over again. Anyone else have this problem. Other than this, I have had absolutely no problems with this computer. Now, it's a file of junk.

Hi Ronald ...
Have you checked lately to see how much free space there is on the disk? Especially since iPhoto freezes at launch ...
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
And make sure the OS X software is up to date.
Click the Apple  top left in your screen.
From the drop down menu click: Software Update
If you have anti virus software installed or are using third party Mac cleaning utiliites, that may be part and parcel of the your problems.

Photoshop cs5.5 - loaded on windows 8 - way too small! top and side

Hi,
I just loaded CS5 (and 5.5 updates) onto my windows 8 microsoft surface pro 3 computer.
the top and sides are soooo small you can't even read it.
I mainly use photoshop; but I loaded the entire web premium set of dvd's.
is there anything I can do?
thanks!

No, I'm on the Cloud now. I've owned Photoshop 5 (1998), 6, 7 CS CS2 CS3 CS4 CS6 CC and now CC 2014.
Just went from Windows to Mac.
Photoshop Elements is a permanent license. You buy it, you keep it. Elements has its' own forum where those who know the program will answer your question.
Anyway thanks for the "correct". You only give it out if anyone settles your questions and you need no further discussion. It closes the case.
"Helpful" awards 5 points towards a score and "like" is recognition of good information.
Gene

I opened iPhoto and it opened as if i just bought the computer. Where are all my photos and how do I get them back?

I opened iPhoto and it opened as if I just bought the computer. Where are all my photos and how do I get them back? Luckily for the most part, I backed up photos on my flash drive, but I had just imported dozens of pictures from my phone. I reopen iPhoto soon after and the prompt asking how I would like to start iPhoto and all came up. I selected what brought me to the iPhoto I open up to every day only without any pictures.

Are you in the correct account that contains the iPhoto Library?
Did you ever move your iPhoto Library to an external drive? If so, and you disconnect this drive, iPhoto will create a new blank one in the pictures folder.
Check your computer to see if the "iPhoto Library" was accidently moved to the trash.
If you still can't locate your images, launch finder, and select "all images" in the source column. This will display all images on your computer. Be carefull not to delete, move or modify the images you see in this manner, as it will cause issues with good iPhoto Libraries, however it may help us locate where the images are.
Once you locate an image, click it once, then in the top menu bar, select "view / show path". This will display it's location along the bottom of the finder window.
Once you know where the image is, this should help you launch iPhoto to the correct library.

I tried to rent a film on my MacBook but it comes up with, In order to rent, you need to authorise this computer. To authorise this computer, select "Authorise Computer..." from the store menu. Where is the store menu and how do I sort it?

I tried to rent a film on my MacBook but it comes up with, In order to rent, you need to authorise this computer. To authorise this computer, select "Authorise Computer..." from the store menu.
Where is the Store menu and how do I authorise my computer?
Please help.
Thank you.

Move the cursor to the very top of the computer's screen, click on Store in the menu bar, and choose Authorize this Computer.
(115518)

ITouch song sorting, scrolling-sidebar doesn't scroll past A; doesn't skip past top and bottom?

Gahh you know how on an iTouch / iPhone, if the songs are sorted alphabetically, you can touch the letter on the right side to skip to that letter in your song library? Here's a picture of my screen (same image as below): http://i45.tinypic.com/2ztlkrl.png
SO here's what's wrong with this:
-the songs start at letter A, but the silver bar that usually should say A on it, says Z instead
-when i click on the right sidebar for other letters, it stays on THIS EXACT SCREEN and doesn't skip to any other letters
-HOWEVER it does scroll/skip to the bottom...so I can basically only get to the top and bottom of my songs
(I already checked that my iTunes is sorted alphabetically and correctly, tried restarting it, restarted the program, resynced, but none of this works)...
Please help me!! Has this happened to your iPod Touch/ iPhone before?? Thanks!
(notice the Z in place of where the A should be..)

The first thing you've got to check is your video drivers.

Button Top and Bottom - one displays other not

I created a report region and added a button to it:
Create a button in a region position
Button name: SUBMIT
Label: Submit
Button Type: Image
Image Name: #COMPANY_IMAGES#lisa.gif
Position: Top and Bottom of region
Then I viewed the page - the top image displays correctly, but the bottom one doesn't. So viewing page source I saw, that Top image src attribute is
wwv_flow_file_mgr.get_file?p_security_group_id=505603948315924&p_fname=lisa.gif
whereas the Bottom image had src of
/i/wwv_flow_file_mgr.get_file?p_security_group_id=505603948315924&p_fname=lisa.gif
Looks like a bug to me :-/
I'll create two buttons now (one for top and other for bottom button), no worries, but I thought you should know.

Kaja,
Yes it's a bug. Thanks for letting us know.
Scott

Formula for printing balance on top and bottom

Post Author: something_stupid
CA Forum: Formula
Hi guys,
I'm fumbling around quite a while now and browsed the forum without any success (probably due to lack of knowledge of the right key-words in English). I want to print the balance of transactions at the top and at the end of each page. As there is some grouping (departmens, account group and accounts) and then in front of the transaction-lines (flag = 2) of each group first some summary lines show up (flag = 1) it's not that easy as I thought.
Here's a verbal description of what I did so far:
defined global nubmverars in a formular-field in the report-header-section
added a formular-field for summing up the required fields and increment a counter for the detail-lines in the detail-section (only 6 or 7 transactions each page should be printed depending on if there's a balance from the last page or not)
adding sub-sections in front and after the detail-section that show the balance of the last page respectively the balance of the current page
both balance-sub-sections are suppressed if the flag of the data-row is not 2. the balance-sub-section at the top is suppressed if there's no balance
summary of each account should be directly printed if there are no more detail-lines of after the top-balance
a formular-field in the page-header-section should set the counter back to 0.
the balance-detail-sub-section at the bottom is printed, if counter = 7 (incl. top balance-sub-section) and a pagebreak is forced.
The big problem I encountered was that the counter was not resetted to 0 at the beginning of each page and it was also not evaluated in the section-setting area (where you can turn pagebreak on/off etc). In the section-setting-area only "WhilePrintingRecords" is allowed, but that doesn't help.
So how can I achieve this kind of report? Best would be a special field like RecordNumber giving the number of records printed on a certain page so far. Any suggestions?
Regards,
Torsten
Now here comes a visual description with some comments. Hope this makes it a bit clearer.
Departement: 1
summary1: 100.00 A                   (flag = 1)
summary2: 400.00 A                   (flag = 1)
Summary of Group A: 500.00
.... [some more Groups]
Summary of all groups: 7500.00
[second part of report for Department 1]
Account 1
detail1: +50     (flag = 2)
detail2: -30     (flag = 2)
detail3: +10    (flag = 2)
balance: of this page: +30       [showing 3 detail-lines]
[pagebreak]
balance: of last page: +30
detail 3: +80   (flag = 2)
detail4: -10    (flag = 2)
balance: of this page: +100      [showing only 2 detail-lines as there's the balance of the last page]
====================
Summary of Account 1: 100
[pagebreak]
Account 2:
Department 2
[summaries]
Account 1:
[accounts]

I don't use You Tube but at least in Vimeo, their encoder sees something like this correctly.
Here is what I assume is what you did…
To change the aspect ratio of the image without changing the frame size (which is what you're showing) use the Trim function in the Transform>Crop options. You will lose some of the image in the re-framing.
Russ

Where are all the songs and whole albums i bought for i tunes? i have a new macbook but iTunes has none of my paid for music

where are all the songs and whole albums i bought for i tunes? i have a new macbook but iTunes has none of my paid for music

Your purchases won't automatically show in your new Mac's iTunes library. If you go into iTunes > Preferences and on the Store tab tick the 'show iTunes in the cloud purchases' then what you can redownload should show in the Music part of your library with a cloud icon against them - click on the cloud to download them. Or click on your name towards the top right of iTunes and then click Purchased on the popup, and you can redownload them from there.
If you've moved countries since buying the music, or if the rights-holders have removed them from the store, then you won't be able to redownload them. In that case if you still have your old computer then you could copy them over from that (e.g. via an external drive : How to move your iTunes library to a new computer - Apple Support or via home sharing), or copy them from your backup of your downloads/library and add them via File > Add Too Library

Where is my deks top and my dash board

Similar Messages

Maybe you are looking for