Where Is My DNS Cache And How Do I Clear It?

I'm using Timbuktu to reach my desktop iMac remotely. I subscribe to DYNDNS to detect IP changes. Recently, after a blackout, I could not reach the iMac remotely via DYNDNS. I WAS able to use the new IP (which I had someone look up for me) and Timbuktu connected just fine.
After contacting DYNDNS, they told me to clear my DNS cache, as that was probably the reason why their detecting system could not see the new IP.
My head is spinning. Can some kindly tell me where the DNS cache is on my iMac 10.4.11 and how to clear it? (For idiots, please).
Many thanks
---Gary

Yes, it's clear. Thanks.
I'm just too nervous to try this until my Mac Guru is sitting here. I can't unscramble anything I screw up...and that's a pretty good possibility based on past events.
Again, thanks
Gary

Similar Messages

  • What is a ARP cache and how do I clear this cache?

    Each time I try to repair my internet connection it states, "unable to complete the repair because it was unable to clear the ARP cache. I do not know or am unable to find in any help file where or what this cache is. Assistance with this would be appreciated greatly. thank you

    See:
    * http://www.mydigitallife.info/2007/06/20/clear-delete-and-refresh-arp-cache-entry/

  • I receive numerous messages in "Bulk Mail". Where do they come from and how can I prevent them from being received? Thanks

    I receive numerous messages in "Bulk Mail". Where do they come from and how can I prevent them from being received? Thanks

    Once you're on a spammer's list, there's nothing you can do to stop the flood of e-mail messages. You can either control it, using spam filtering (which is what files those messages in the Junk Mail folder), or you can throw out your e-mail address and get a new one.
    It's sad, but spam is simply a fact of life at this point, and there's nothing to be done about it. Legislation has been tried, with zero success, since most spam either comes from countries with no legislation or from personal computers that have been infected with malware and are part of a "botnet."

  • I just purchased an airport extreme router to increase the range of    my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

    I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

    sylviafromhanover wrote:
    So I assume that the original modem stays installed with the coaxial cable and the Exrtreme is in addition to that. 
    Yes, that is correct.
    Did you have the instructions that came with your Airport Extreme?  Are you sure you have it setup properly?  Here is the setup guide:
    http://manuals.info.apple.com/en/airportextreme_802.11n_userguide.pdf 
    Ensure you have everything setup properly.  Once you do this and if you are still having trouble, follow Star's instructions. 

  • The battery of my hp compaq presario needs to be replace,where can i buy it and how much?thanks,..

    the battery of my hp compaq presario needs to be replace,where can i buy it and how much?thanks,..

    Hi,
    There are many Compad Presario models/laptops out there, you need to buy the right one for your machine. Here is a place, you can buy from them or using as a guide (cost) to buy elsewhere:
      http://www.hp-laptop-batteries.com.au/compaq-laptop-battery.htm
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT4528 When I copy a photo or anything, where does it go to and how can I view and /or retrieve it?

    When I copy a photo or anything else, where does it go to and how can I view and/or retrieve it?

    JimHdk wrote:
    If you "Save" a photo it goes to your Camera Roll in the Photos App.
    If you merely "Copy" a photo it doesn't go anywhere until you "Paste" it somewhere as, for example, into a email or document.
    Well if you want to get technical about it ...

  • I want to copy bookmarks in my folder.where i can find its and how i make it?

    i want to copy bookmarks in my folder.where i can find its and how i make it?please

    Profile is a folder where your Firefox store all of your information
    * https://support.mozilla.com/en-US/kb/Profiles
    in this link you can find how to backup your profile and restore them

  • I'm trying to use Dictation.  Where does the text go, and how can I retrieve it?  Thank you.

    I'm trying to use Dictation.  Where does the text go, and how can I retrieve it?  Thank you.

    You dictate after you open a blank page in any text editor. The text goes on the page.
    You can use Text Edit for example (in your applications folder).
    With the blank page open, go to the Edit menu and select Start Dictation. When you are finished, you save the file as you would any other document. You can retrieve it, edit it or anything else you want, because it is a file like any other you create with that text editor.

  • Got a new Macbook Pro itunes music was all there.  Suddenly it is not and my library is probably about 1/4 of what it was.....where did the music go and how do I get it back?

    Got a new Macbook Pro itunes music was all there.  Suddenly it is not and my library is probably about 1/4 of what it was.....where did the music go and how do I get it back?

    Hi there,
    You may find the article below helpful.
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    -Griff W.

  • I opened iPhoto and it opened as if i just bought the computer. Where are all my photos and how do I get them back?

    I opened iPhoto and it opened as if I just bought the computer. Where are all my photos and how do I get them back? Luckily for the most part, I backed up photos on my flash drive, but I had just imported dozens of pictures from my phone. I reopen iPhoto soon after and the prompt asking how I would like to start iPhoto and all came up. I selected what brought me to the iPhoto I open up to every day only without any pictures.

    Are you in the correct account that contains the iPhoto Library?
    Did you ever move your iPhoto Library to an external drive?  If so, and you disconnect this drive, iPhoto will create a new blank one in the pictures folder.
    Check your computer to see if the "iPhoto Library" was accidently moved to the trash.
    If you still can't locate your images, launch finder, and select "all images" in the source column.  This will display all images on your computer.  Be carefull not to delete, move or modify the images you see in this manner, as it will cause issues with good iPhoto Libraries, however it may help us locate where the images are.
    Once you locate an image, click it once, then in the top menu bar, select "view / show path".  This will display it's location along the bottom of the finder window.
    Once you know where the image is, this should help you launch iPhoto to the correct library.

  • I tried to rent a film on my MacBook but it comes up with, In order to rent, you need to authorise this computer. To authorise this computer, select "Authorise Computer..." from the store menu. Where is the store menu and how do I sort it?

    I tried to rent a film on my MacBook but it comes up with, In order to rent, you need to authorise this computer. To authorise this computer, select "Authorise Computer..." from the store menu.
    Where is the Store menu and how do I authorise my computer?
    Please help.
    Thank you.

    Move the cursor to the very top of the computer's screen, click on Store in the menu bar, and choose Authorize this Computer.
    (115518)

  • When I click the Sections button then click on the 1st page I get  a page that is titled "Lorem ipsum dolor sit amet"! Where did it come from and how do I get rid of it. I have tried deleting and "dont save" but it comes back.

    In Pages when I click the 'Sections'  button then click on the 1st page I get  a page that is titled "Lorem ipsum dolor sit amet"!  Where did it come from and how do I get rid of it? I have tried deleting and "dont save" but it comes back. It is a full page in some unknown language. The only thing I can decifer is 'cupy uf cak'.   Rdal

    Roger,
    The icon is +Sections, not just Sections, as in "Add a Section". When you click that icon you get a section break and and a new section template, complete with preformatted text called placeholder text. The reason "Lorem ipsum" is there is so you can see what the format looks like. The reason that it is Latin gibberish is so you won't get hung up on, or distracted by, what it says. It's just a display of format. Select the "Lorem ipsum" text and start typing your content.
    Jerry

  • Mountain Lion is downloading, how can I tell where it is downloading to and how much has downloaded?

    Mountain Lion is downloading, how can I tell where it is downloading to and how much has downloaded?

    In the "purchases" tab in the App Store you'll see a progress report. 
    Also once it completes downloading the installer will auto-launch.
    Once you get Mountain Lion installed, if you have the Downloads folder in your dock you will get a progress indicator in the dock while it's downloading :-)

  • HT5246 I have downloaded Flashback Malware Removal tool, now where do I find it and how do I get to run?to run

    I have downloaded Flashback Malware Removal tool, now where do I find it and how do I run it?

    joseph94530 wrote:
    I have downloaded Flashback Malware Removal tool...
    FYI, if it did not show up in Software Update, then it was not needed.

  • HT4796 Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

    Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

    Hello.  It looks like I recovered all my keywords attached to photos.  What I did:
    First I located all photos without keywords using a metadata search.
    I found that it seemed to be certain groups of photos that had no keywords.  I decided to at least get the main keyword on all of those in a particular group, like Canyonlands. 
    Once I added one of the keywords, the others all showed up magically!  I then went to each group of photos and added the main keyword, and the others came along and attached to the photos.
    Don't understand why this occurred or why it got fixed, since it was so random.  But, I'm glad to have my keywords restored (I had divided flowers by color, etc. so it was a lot of work!)
    Thanks for the discussion and help.

Maybe you are looking for

  • SAP Treasury - Link a Purchase and Sale of an OTC transaction

    Hello All We have implemented SAP OTC transactions (51A, 52A, 53A and 55A). We did not have the requirement to sell them when they were set up. However we got the requirement recently. We need to link the purchase and sale of a transaction and record

  • How can I get the functionality of the old "Spaces" in Mission Control?

    How can I make Lion show a space number on the top of the screen so I can see which space I am in? How can I make Lion switch spaces in a ring? ie? 1, 2, 3, 4, 5, 6, 1, 2, 3,  ... How can I make lion switch directly to a numbered space?  ie: 1, 4, 5,

  • Unable to customize condition branch

    Hello, I'm having a strange issue where I want to put some content in Starter Edition "Virtual Server Post-provisioning" process which sould be allowed as this process has the "workflow" customizable flag. I've been able to add some activities but wh

  • Hyperlink from image

    Can I hyperlink to a webpage from an image in a Page09 document?

  • Process chain triggered twice

    I have a triggeed a process chain twice. The flow of the process chain is like this: from PSA to ODS full load---- from ODS to Cube delta load. There is selection criteria at infopackage to ODS with createdon.. ie for ex: if we run today, the from da