Where is my fax number?

The manual says I should find my fax number on the printer screen.  I can not find it.  Does anyone know where it is?

Thank you for the reply. I have decided to return the 6700 for a 7515. Again thank you. Marichue

Similar Messages

  • Where can I find my fax number? I have all-in-one 3050A--J611 Series

    where can I find my fax number? I have all-in-one 3050A--J611 Series

    it seems ur printer model doesn't have a fax option ........

  • How to change email/fax number retrieval logic for output...

    Hi,
    In my requirement, for sending the output by fax / email, for e.g. take certificate of analysis, the customer master data is checked and the data mentioned there is used to send the output. In addition, in customer master transaction XD01/XD02 I see an additional tab called contact person which has information of each contact person along with their department numbers and fax num and email ids.
    In ADR3 I noticed that these are stored.
    In short
    In XD03,  under address tab a fax num maintained which I do not want to use. Rather,
    Under contact person tab , the entry which has dept number as say A100, the associated fax num is the one to which I want the COA to be sent.
    Where exactly is the code that reads these entries and determines the fax number and email ids to which the output needs to be sent ? May be there I need to change the logic to include a check such that entries that have dept as A100 will be checked and those fax and email ids will be selected and set.
    Or if there is any other way this can be achieved, pl advise.
    thnks

    Senthil,
    The COA trigerring works fine. The delivery for  which PGI will be done and then COA will be sent that has the output configured such that Fax will be sent. In SOST I can see the entry which shows the fax num as say 787878.
    But this was the number found in the ADDRESS tab in XD03 for that ship to partner. I do not want that fax num to be used. I want the fax number that I enter in an additional tab and which is stored in KNVK and ADR3 tables.
    So once SAP determines it has to fax the COA , SAP shoud be reading the ship to pary fax num, right ? Where is that code in standard SAP ? Bcos I need to change the logic to read somwhere else !! Hope you are able to follow me now ?
    thnks

  • Reg Telephone and Fax Number updation in Purchase orders

    Hi Experts,
    I need small information about Telephone Number and Fax numbers updation in Purchase Orders.
    Actually my user requirement is they have been provided the Purchase Organizations XXXX,XXXX.
    From this Two Purchase Orgs the users who are all created the POs the Telephone Number,Fax Number need to pick from the relvant User Master(user profile SU01).
    For this how i can discuss with my Abaper.
    If you have any idea on this please suggest me.
    Brgds,
    RK

    Hi RK
    Where do you need to update this information in the PO or the PO output ( Print / Fax / email)
    If you want to update these in the PO  then you need to use the customer exit.
    Enhancement        MM06E005 - Customer fields in purchasing document
    If you need to determine the details in the PO output then the smartform / script  being used needs to be modified to determine the data of the user derived from table EKKO - ERNAM  created by
    The address number needs to determined from table USR21 using the user ID  - PO created by( EKKO - ERNAM_ and using the address number derive the telephone number and fax number from table ADRC.

  • Account clerk,Tele & Fax Number in Smartform

    Hi Gurus
    I am trying to print Account clerk,Tele phone number and Fax Number in Smartform but its not printing .I am using Structer FSABE .Fields are SALUT,TELF1 and TELFX.i am using the TC:VF02.please can anyone help me where i can get the details and which its pulling from.please can anyone tell me the solution please
    Thanks in advance
    Edited by: Reddy on May 19, 2010 8:25 AM

    Check table T001S to get user name of A/c clerk. Then you can read the details using BAPI_USER_GET_DETAIL.

  • Fax number and e-mail from a contact person

    Hi,
    Does anyone know the table where the fax number and the e-mail of a customer or vendor contact person is?
    The table KNVK only have the telephone number...
    Thanks
    Hugo

    Check tables: ADR3, ADR6..
    From kna1 u will get the address no (ADRNR). And fetch data based on ADRNR from these tables.
    Regards,
    Joy.

  • To get the contact fax number in my form

    Hi!
    I would like to get the fax number on the customer section of my smartform for BOL. How do i get the contact fax number in my form with following lines that i ahve for getting contact name.
    data: l_parnr like vbpa-parnr,
          l_name1 like knvk-name1,
          l_namev like knvk-namev. "first name
    select parnr into l_parnr from
           vbpa
           where
           vbeln = g_sale_ord and
    *      vbeln = is_nast-objky and
           parvw = 'AP'.
           exit.
    endselect.
    if l_parnr is not initial.
       select single name1 namev  into (l_name1, l_namev)
          from knvk
          where
           parnr = l_parnr.
       concatenate l_namev l_name1 into g_contact separated by ' '.
    endif.
    Thanks

    I added this and it shows up the fax number:
    data: l_parnr like vbpa-parnr,
          l_name1 like knvk-name1,
          l_namev like knvk-namev, "first name
          l_kunnr like vbpa-kunnr,
          l_persnumber like adcp-persnumber,
          l_fax_number like adcp-fax_number,
          l_vbelv like vbfa-vbelv.
    select parnr into l_parnr from
           vbpa
           where
           vbeln = g_sale_ord and
    *      vbeln = is_nast-objky and
           parvw = 'AP'.
           exit.
    endselect.
    if l_parnr is not initial.
       select single name1 namev  into (l_name1, l_namev)
          from knvk
          where
           parnr = l_parnr.
       concatenate l_namev l_name1 into g_contact separated by ' '.
    endif.
    select vbelv into l_vbelv from vbfa where
    vbeln = gs_hd_adr-deliv_numb and
    vbtyp_n = 'J' and
    vbtyp_v = 'C'.
      exit.
    endselect.
    select single parnr from vbpa into l_parnr
    where vbeln eq l_vbelv
    and parvw eq 'AP'.
    if sy-subrc eq 0.
      select single * from knvk into g_knvk where
      parnr = l_parnr.
      select single fax_number into g_contact_fax
      from adcp
      where persnumber = g_knvk-prsnr.
    else.
      select single kunnr from vbpa into l_kunnr
      where vbeln eq gs_hd_adr-deliv_numb
      and   parvw eq 'AG'.  "sold to
      if sy-subrc <> 0.
    *from ship to
        select single kunnr from vbpa into l_kunnr
        where vbeln eq gs_hd_adr-deliv_numb
        and   parvw eq 'WE'.  "ship to
      endif.
      check sy-subrc = 0.
      select single * from knvk into g_knvk where
      kunnr = l_kunnr and
      abtnr = 'Z007'.
      select single fax_number into g_contact_fax
      from adcp
      where
      persnumber = g_knvk-prsnr.
    endif.
    Thanks

  • Does Martial status, Email id and Fax number is maintained in any infotypes

    Hello,
    Does SAP provides with the facility of catching
    Martial status ,
    Email id ,
    Fax number,
    overrseas indicator,
    Date of Birth Verified
    for an employee in any of the infotypes . If yes can you please tell where do we maintain this.
    Also if we need these details for HR Reporting purpose then how we can get these details for an employee.
    Regards,
    Vidya.

    Martial status - PA0002-FAMST
    for other fields related to Communications, check the fields PA0105-USRTY, PA0105-USRID, PA0105-USRID_LONG.
    U can use the FM <b>HR_READ_INFOTYPE</b> to fetch the details of a PA infotype

  • Changing fax number of a failed fax in SOST and re-send

    Hi  all,
    The issue is that if a program is firing a fax with a wrong fax number ... the message is recorded as an error in the SOST/B transaction(s).
    Now is there any way I can change the fax number of the message in SOST and then re-send it.
    Because when I click on re-send it does not give me any options to change any of the message attributes and directly fires the fax.
    Please advise.
    Regards,
    Adi

    All the loops (with VERY few exceptions) in Garage Band are in the same key, the key of C.
    That's not true! You might get the impression because the standard key of a new GB project is C, so in the preview all loops play in C (unless they have been labeled incorrectly.)
    If I remember correctly, the original key was listed in the Loop Browser in previous versions of GB, I can't find it in the current one. But if you listen to a loop in the Finder, you can hear its original version.
    This gets important when you have to decide whether to raise or lower a loop. Let's say the loop was recorded in G, you put it in your C major song, and you want it to sound in F. Then you might be tempted to raise it by 5 semitones, because that seems "closer" than lowering it by 7. However, since the original was probably already raised by 5 steps to sound in C, that will result in an overall shift by 10 semitones - probably it sounds weird that way, whereas lowering it by 2 semitones would sound fairly natural.
    Of course you can also just trust your ears, but I find that additional information helpful.

  • Sending Email Address else Fax Number

    Hi Gurus,
    I have one requirement where in the print program the program should fetch the fax number from the partner function TZ  and email address from the part function Z1 .
    The code i have used:
    To EXTRACT ADDRESS
    IF sy-uname = 'WF-BATCH'.
        SELECT SINGLE adrnr INTO ls_adrnr FROM  vbpa CLIENT SPECIFIED
               WHERE  mandt  = sy-mandt
               AND    vbeln  = nast-objky
               AND    posnr  = '000000'
               AND    parvw  = 'Z1'.
    To Extract email address and fax number:
    CALL FUNCTION 'ADDR1_EXTRACT_TABLES'
          TABLES
            t_address_keys = lt_address_keys
            t_adrc         = lt_adrc
            t_adr3         = lt_adr3 " type adr3
            t_adr6         = lt_adr6 "type adr6
          EXCEPTIONS
            empty_table    = 1
            OTHERS         = 2.
    where lt_adr6 contains email addr and lt_adr3 faxnumber
        IF sy-subrc <> 0.
      IF nast-nacha = gc_5.  " gc_5 = 5
          READ TABLE lt_adr6
            INTO lwa_adr6
            INDEX 1.
          IF sy-subrc = 0.
            lwa_receivers-receiver   = lwa_adr6-smtp_addr.
            lwa_receivers-rec_type   = gc_u.
            lwa_receivers-com_type   = gc_int.
            lwa_receivers-notif_del  = gc_x.
            lwa_receivers-notif_ndel = gc_x.
            APPEND lwa_receivers TO lt_receivers.
          ENDIF.
        ELSEIF nast-nacha = gc_8. " gc_8 = 8.
          READ TABLE lt_adr3
            INTO lwa_adr3
            INDEX 1.
          IF sy-subrc = 0.
            CONCATENATE lwa_adr3-fax_number text-002 INTO lwa_receivers-receiver.
            lwa_receivers-rec_type   = gc_u.
            lwa_receivers-com_type   = gc_int.
            lwa_receivers-notif_del  = gc_x.
            lwa_receivers-notif_ndel = gc_x.
            APPEND lwa_receivers TO lt_receivers.
          ENDIF.
        ENDIF.
    But i om not getting any neither the fax number nor the email address.

    CONCATENATE lwa_adr3-fax_number text-002 INTO lwa_receivers-receiver.
    lwa_receivers-rec_type = gc_u.
    lwa_receivers-com_type = gc_int.
    lwa_receivers-notif_del = gc_x.
    lwa_receivers-notif_ndel = gc_x.
    APPEND lwa_receivers TO lt_receivers.
    ENDIF.
    in this change
    lwa_receivers-rec_type = 'F'.

  • Need exits or badis for populating fax number while creating PO using ME59

    Hi ,
        I need to populate fax number for the OA type vendor in partners tab during PO creation using ME59.
    these  fax numbers are maintained in custom table .
    i was not able to find any exits or badis .
    Please suggest me if there are any exits and badi to populate fax number in purchase order screen
    and also where the fax number is stored after saving PO.
    thanks in advance,
    Srilakshmi

    what is the requirement ?
    Fax number to be entered only for  that particular PO ? or should it be effective for that Vendor's address ?
    In SAP when one enters Vendor number, the address is fetched. When one changes or appends any details in address, new adrnr is created & saved in document header. EKKO-ADRNR
    if it is BDC it will be taken care automatically, but when u r doing it through BAPI then it's bit complecated.  you may have to first see the current address is default vendor address or user has already changed it. it it is default vendor addrnr then you need to create new Address with Fax number & assign in to that PO. if it is modified address for that PO then get ekko-adrnr & modify that address.

  • Can I send an email to a fax number?

    Since I don't know the email address of the person I want to contact, but do have a fax number, can I compose an email in Thunderbird and send it to the fax number? Do I need an add-on or special format in 'send to'?

    In general, a message sent to a fax machine requires a phone call, and email clients don't know how how to make phone calls.
    Some years ago, it was quite common for ISPs to offer a limited number of free calls, usually SMS messages to mobiles, occasionally faxes IIRC. Most of these promotional services seem to have quietly vanished.
    There used to be a network (TPC rings a bell) that ran a system where you could email to a fax server near to your destination, and they'd do the final mile, the fax call, for you, for free, but it always arrived with advertising added in.
    So, all in all, it's not trivial to send a fax from an email client.
    There are still businesses that do this, almost always for a fee. It's usually a two-way deal; you get a number to which others can send faxes, which end up in your email Inbox, and you can use the same number to send faxes by email.
    Here's one I've used in the past.
    http://home.efax.com/
    This is '''not''' a recommendation.
    Not so long ago, we all had a modem built into our computers. This, when connected up to a regular landline, with the relevant software, can allow your computer to work as a fax machine. Obviously, each fax you send costs you a phone call just as running a real fax machine would. Certainly, in Windows XP, the ability to send a fax was built in; you compose in a word processor or text editor, then select the fax device as the printer. A dialogue box would prompt you for the fax number to send it to. For all I know, this capability is still present in Windows 7 and 8.
    If you don't have a landline, your mobile phone may offer something similar.

  • Mail ID and FAX number maintenece

    Hi All,
            As we know ,  we can track the mail and Fax status through transaction SOST . I want to know where and how the mail or fax number is configured or maintaintained for this mail notification ?

    Martial status - PA0002-FAMST
    for other fields related to Communications, check the fields PA0105-USRTY, PA0105-USRID, PA0105-USRID_LONG.
    U can use the FM <b>HR_READ_INFOTYPE</b> to fetch the details of a PA infotype

  • Fax number list

    when I set up my HP all-in-one, it allowed me to add, adjust, group and change fax numbers from OSX via a fax number program. Now that I no longer have that printer, I figured the fax list was HP independent as the apple fax menu has no record of this list or groups.
    However, I just downloaded and installed pagesender a freeware third party software that works 10 times better than apple's fax software. Pagesender has the complete list of numbers and groups that the HP software used.
    My question is, where is this list kept in the system and how can I access it independently of other programs?

    try typing a name from the list into spotlight, it may locate where the list is stored

  • Remote faxing error - A fax number was not provided.

    I have a USRobotics 5637 Fax / Modem attached to a Mac Mini. I can send and receive faxes on the Mini.
    I have enabled printer sharing on the Mini. User rights are everyone is allowed to print. When I try to print to the shared fax from my MacBook Air, The Mini does not send the fax. CUPS provides this error:
    USB_Modem-153
    Unknown
    Withheld
    18k
    Unknown
    completed at
    Mon Aug 12 16:36:37 2013
    "A fax number was not provided."
    So the MacBook Air sees the Fax on the Mini and the job gets sent to the Mini but the fax number apparently does not get sent to the print server. Both machines are running 10.8.4 and are connected to the same (hardwired) network.
    Is there something I am missing. I type the fax number in on the Air and I have tried various formats (xxx-xxxx, (xxx) xxx-xxxx, xxxxxxx etc) just to see if this makes a difference but no luck.
    I have attached the CUPS log file below: There is the USR fax/modem as well as a Brother MFC printer configured.
    Any suggestions?
    Thank you
    D [12/Aug/2013:16:59:29 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
    D [12/Aug/2013:16:59:56 -0300] Report: clients=1
    D [12/Aug/2013:16:59:56 -0300] Report: jobs=147
    D [12/Aug/2013:16:59:56 -0300] Report: jobs-active=0
    D [12/Aug/2013:16:59:56 -0300] Report: printers=2
    D [12/Aug/2013:16:59:56 -0300] Report: stringpool-string-count=4968
    D [12/Aug/2013:16:59:56 -0300] Report: stringpool-alloc-bytes=10648
    D [12/Aug/2013:16:59:56 -0300] Report: stringpool-total-bytes=67184
    D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Get-Printer-Attributes 1
    D [12/Aug/2013:16:59:56 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Validate-Job 2
    D [12/Aug/2013:16:59:56 -0300] Validate-Job ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Validate-Job (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] Accepted from 192.168.1.20:631 (IPv4)
    D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Create-Job 3
    D [12/Aug/2013:16:59:56 -0300] Create-Job ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
    D [12/Aug/2013:16:59:56 -0300] add_job: requesting-user-name="ufa"
    D [12/Aug/2013:16:59:56 -0300] Adding default job-sheets values "none,none"...
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Adding start banner page "none".
    D [12/Aug/2013:16:59:56 -0300] Discarding unused job-created event...
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Queued on "USB_Modem" by "ufa".
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Create-Job (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] 2.0 Get-Printer-Attributes 4
    D [12/Aug/2013:16:59:56 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 23] Accepted from localhost (Domain)
    D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 23] POST / HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 23] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Send-Document 5
    D [12/Aug/2013:16:59:56 -0300] [Client 23] 2.0 Get-Jobs 30
    D [12/Aug/2013:16:59:56 -0300] Get-Jobs ipp://localhost:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/USB_Modem) from localhost
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] Send-Document ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] cupsdIsAuthorized: requesting-user-name="ufa"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] Auto-typing file...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] Request file type is image/tiff.
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    I [12/Aug/2013:16:59:56 -0300] [Job 154] File of type image/tiff queued by "ufa".
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Adding end banner page "none".
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] time-at-processing=1376337596
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] Asserting dark wake.
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] job-sheets=none,none
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[0]="USB_Modem"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[1]="154"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[2]="ufa"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[3]="untitled text 6"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[4]="1"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[5]="job-uuid=urn:uuid:f1a61d10-1959-3fc1-7248-88abadd7e431 job-originating-host-name=192.168.1.20 time-at-creation=1376337596 time-at-processing=1376337596"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[6]="/private/var/spool/cups/d00154-001"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[0]="<CFProcessPath>"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[11]="[email protected]"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[12]="SOFTWARE=CUPS/1.6.2"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[14]="USER=root"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[15]="CUPS_MAX_MESSAGE=2047"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[17]="CUPS_ENCRYPTION=IfRequested"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[18]="IPP_PORT=631"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[19]="CHARSET=utf-8"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[20]="LANG=en_US.UTF-8"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[21]="APPLE_LANGUAGE=en-US"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[22]="PPD=/private/etc/cups/ppd/USB_Modem.ppd"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[23]="RIP_MAX_CACHE=128m"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[24]="CONTENT_TYPE=image/tiff"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[25]="DEVICE_URI=fax://dev/cu.usbmodem0000001"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[26]="PRINTER_INFO=FAX"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[27]="PRINTER_LOCATION=mini"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[28]="PRINTER=USB_Modem"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[29]="PRINTER_STATE_REASONS=none"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[30]="CUPS_FILETYPE=document"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[31]="FINAL_CONTENT_TYPE=printer/USB_Modem"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[32]="AUTH_I****"
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/cgimagetopdf (PID 51019)
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 51020)
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/rastertotiff (PID 51021)
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Started backend /usr/libexec/cups/backend/fax (PID 51022)
    D [12/Aug/2013:16:59:56 -0300] Discarding unused job-state-changed event...
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Send-Document (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] 2.0 Get-Job-Attributes 6
    D [12/Aug/2013:16:59:56 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] HTTP_WAITING Closing on EOF
    D [12/Aug/2013:16:59:56 -0300] [Client 21] Closing connection.
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] HTTP_WAITING Closing on EOF
    D [12/Aug/2013:16:59:56 -0300] [Client 22] Closing connection.
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
    D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Get-Job-Attributes 7
    D [12/Aug/2013:16:59:56 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: copying to temp print file "/private/var/spool/cups/tmp/0c74c52155d4d"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - document title: "untitled text 6"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - filename: "/private/var/spool/cups/d00154-001"...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - opened PPD file "/private/etc/cups/ppd/USB_Modem.ppd"...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - dpi: (204, 196), orientation = 1...
    E [12/Aug/2013:16:59:56 -0300] [Job 154] A fax number was not provided.
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] Set job-printer-state-message to "A fax number was not provided.", current level=ERROR
    D [12/Aug/2013:16:59:56 -0300] Discarding unused job-progress event...
    D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51022 (/usr/libexec/cups/backend/fax) exited with no errors.
    D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51019 (/usr/libexec/cups/filter/cgimagetopdf) exited with no errors.
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: “/private/var/spool/cups/tmp/0c74c52155d4dâ€&#157; has 1 pages.
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: opened PPD file "/private/etc/cups/ppd/USB_Modem.ppd"...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: size->width = 612, size->length = 792, size->top = 773.4, size->bottom = 18.6, size->left = 16.6, size->right = 595.4
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: PreferredRotation = 90
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: colorspace = 3, bitsPerColor = 1
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: band width = 1640, bytesPerRow = 1640, band height = 2055, height = 2055
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: context width = 1640, height = 2055, bitsPerComponent = 8, bitsPerPixel = 8, bytesPerRow = 1640, bitmapInfo = 0, resolution = (204.000000, 196.000000)
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: bytes written for side 1 = 421275
    D [12/Aug/2013:16:59:56 -0300] [Job 154] rastertotiff read page 1 (421275 bytes)
    D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51020 (/usr/libexec/cups/filter/cgpdftoraster) exited with no errors.
    D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51021 (/usr/libexec/cups/filter/rastertotiff) did not catch or ignore signal 13.
    D [12/Aug/2013:16:59:56 -0300] [Job 154] time-at-completed=1376337596
    D [12/Aug/2013:16:59:56 -0300] Discarding unused job-completed event...
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Job completed.
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
    D [12/Aug/2013:16:59:57 -0300] [Client 22] Accepted from 192.168.1.20:631 (IPv4)
    D [12/Aug/2013:16:59:57 -0300] [Job 154] Unloading...
    D [12/Aug/2013:16:59:57 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:57 -0300] Releasing dark wake assertion.
    D [12/Aug/2013:16:59:57 -0300] [Client 22] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 21] HTTP_WAITING Closing on EOF
    D [12/Aug/2013:16:59:57 -0300] [Client 21] Closing connection.
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
    D [12/Aug/2013:16:59:57 -0300] [Client 23] POST / HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 23] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 24] Accepted from localhost (Domain)
    D [12/Aug/2013:16:59:57 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 21] 2.0 Get-Job-Attributes 9
    D [12/Aug/2013:16:59:57 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] [Job 154] Loading attributes...
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 30
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/USB_Modem) from localhost
    D [12/Aug/2013:16:59:57 -0300] [Client 23] 2.0 Get-Printer-Attributes 31
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost:631/printers/USB_Modem) from localhost
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 22] 2.0 Get-Printer-Attributes 8
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/Brother_MFC_8480DN HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 31
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/Brother_MFC_8480DN
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Brother_MFC_8480DN) from localhost
    D [12/Aug/2013:16:59:57 -0300] [Client 23] POST / HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 23] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 21] 2.0 Get-Printer-Attributes 10
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 22] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/Brother_MFC_8480DN HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 22] 2.0 Get-Job-Attributes 11
    D [12/Aug/2013:16:59:57 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 32
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/Brother_MFC_8480DN
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Brother_MFC_8480DN) from localhost
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 23] 2.0 Get-Jobs 32
    D [12/Aug/2013:16:59:57 -0300] Get-Jobs ipp://localhost:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/USB_Modem) from localhost
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 22] HTTP_WAITING Closing on EOF
    D [12/Aug/2013:16:59:57 -0300] [Client 22] Closing connection.
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 21] HTTP_WAITING Closing on EOF
    D [12/Aug/2013:16:59:57 -0300] [Client 21] Closing connection.
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [12/Aug/2013:17:00:00 -0300] [Client 21] Accepted from localhost:631 (IPv6)
    D [12/Aug/2013:17:00:00 -0300] [Client 21] GET /admin/log/error_log? HTTP/1.1
    D [12/Aug/2013:17:00:00 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [12/Aug/2013:17:00:00 -0300] [Client 21] Authorized as Xxx using Basic

    Now all are running 10.9.2. Same problem, except that two of the 10.9.2 clients have this problem. (They may both have had this problem with 10.9.1, but it wasn't noticed until now.)
    I have reset the printing system on the serving Mac, added the fax back in, and still have the problem.
    I also reset the printing system on one of the problem clients, tried a different user, and still have the problem.
    I also verified that the fax.ppd files are identical on working and non-working clients. They are.
    This is really, really frustrating.

Maybe you are looking for

  • Using Java and EditRocket with iMac?

    I am trying to compile a program on my iMac using EditRocket. I have to write programs in Java. I am having no luck on my own and AppleCare couldn't help me either. I cannot locate the Java in my computer and in order to use Editrocket I have to link

  • Mac very slow on startup

    I'm having serious slow startups on my mac pro. Its a little old but was working well until I installed OSX 10.7.5. Chrome takes 15 minutes to start and dropbox takes longer. Any ideas welcome. Hardware Information:           Mac Pro           Mac Pr

  • Variable with offset error

    Dear gurus, On my query i have a variable V1 ( user input ) for the period char ( 0fiscper3 ). I need to have a column with values from period imputed on V1 + 1 until period 13, but when user inputs on V1 value 12 ( 12 + 1 = 13 ), values for period 1

  • **Proxy creation in sproxy tcode

    Hi all, I am trying to create client(sender)proxy. 1)Created the message interfaces in the scenario,In the sproxy Tcode created the Proxy by right clicking the message interface and after creating the proxy,activated the same. When I bouble clicked o

  • Better memory usage

    Hi, why is iTunes not using my RAM to store the songs of the current playlist. I have more than 1GB, so the playlist would fit easy into the RAM. That way the harddisc could spin down when I am just listening to music (e.g. at night before going to s