Where is my signature?

I want my normal regular signed signature to put on a form but it keeps sending me to a digital signature where I have to save to a file and blah, blah, blah. What happened to my signature?

When you take a picture in Photo booth you get these options:
If you saved it, I suspect it should be in your iPhoto Library.
Ciao.

Similar Messages

Where is Mail signature button?

Hello,
Can anyone tell me where the Mail signature button is? I click "New Message" and it should be in the toolbar. I can customise the toolbar easily but have not seen the Mail signature button anywhere. Searches for a picture of it found nothing and all the tutorials seem to be for an outdated version of Mail.
Thank you for your help.
Ian

hmm, since the 10.6.7 update, my signature are gone ...
so, what i just did is this:
● go mail > preferences > signatures
● do this
● followed by this
now click on +new message+ and the signature button should be there (at least it worked for just now).
( *click on images to enlarge* )
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Where do IPS signature save at?

Hi
i successfully load the IOS IPS package into the router, verify via CLI and CCP the IPS signature did compile on the router. (advanced mode, around 588 signature is active)
but it went gone (happened twice), i just want to ensure few things
1. i did shut down my router, and migrate to production site, would it cause by the power off / on then IPS signature missing?
2. i did remove the "ip ips iosips in/out" command that previous apply at my interface, would this cause the IPS disable and gone?
just counldn't figure out why now my router only have 3 signature only..
thanks

1. Please use the doc below for reference on how to configure IOS-IPS on the router. I will try to answer your questions using this document.
http://tools.cisco.com/squish/9Be6a
2. You will see in step 2.1 we create directory on flash to store all the signature files and configurations.
e.g:
mkdir
router#mkdir ips
Create directory filename [ips]
Created dir flash:ips
3. In step 4.2 , we configure IPS signature storage location by referencing the directory we created above.
e.g:
ip ips config location flash:
router(config)#ip ips config location flash:ips
This is where the signature files will be stored.
4. In step 5.1 we copy the signature files to the router.
e.g:
router#copy ftp://cisco:[email protected]/IOS-S310-CLI.pkg idconf
Loading IOS-S310-CLI.pkg !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 7608873/4096 bytes]
The idconf command compiles the signature after the file is copied.
5. If all the above steps are done correctly, you should see the following files in flash:
router#dir ips
Directory of flash:/ips/
7 -rw- 203419 Feb 14 2008 16:45:24 -08:00 router-sigdef-default.xml <----Contains factory default signature definitions.
8 -rw- 271 Feb 14 2008 16:43:36 -08:00 router-sigdef-delta.xml
9 -rw- 6159 Feb 14 2008 16:44:24 -08:00 router-sigdef-typedef.xml
10 -rw- 22873 Feb 14 2008 16:44:26 -08:00 router-sigdef-category.xml
11 -rw- 257 Feb 14 2008 16:43:36 -08:00 router-seap-delta.xml
12 -rw- 491 Feb 14 2008 16:43:36 -08:00 router-seap-typedef.xml
64016384 bytes total (12693504 bytes free)
6. Make sure you do a 'Router#write memory' before you reload the router. This way the configuration done gets stored and is preserved after reboot.
Also make sure your configuration register on the router is correctly set to 0x2102.
Sid Chandrachud
TAC security solutions

Where are digital signatures stored?

I can't find the digital signature I created a while back. I know the password but can't find where it is stored.
Help would be appreciated.
Thanks.
PS. Mac OSX 10.5.5
Acrobat 9

In previous versions of Acrobat, it put them here, a non-standard location on the Mac: <yourname> > Library > Acrobat User Data > 8.0 or 8.0_86 [or previous version #] > Security In Acrobat 9, they're stored here: <yourname> > Library > Application Support > Adobe > Acrobat > 9.0 or 9.0_x86 > Security

Where is the signature capture image stored?

Does anybody know where the image is stored once it's cptured? I'm trying to find it so I can use it in other applications.
Thanks

MacKid4854 wrote:
Well I will give apple props for thinking of encryping the signature,
Fully agreed here.
but it also creates problems if users would like to use it to sign letters in Pages or emails without going though that additional step of saving it as a PDF and then signing it.
I have been using scanned and stored signature for years on OS X. Screenshot/alpha_channel/copy&paste
Most Page files get exported as PDF anyway to send or print, so not necessarily an issue.
Third party pdfPen does a beautiful job of handling stored signatures for user friendly experience.
I do think it is progress for Apple and Sig Capture/Preview.

Where is my signature from Mail/Preview Markup stored?

I just found out about adding my signature to documents in Mail and Preview (way cool!) and was wondering where the digital file of my signature is stored.
I was really impressed by the quality of the signature and now I'd like to use it in other places as well
I'm using a 2013 MB Air with 10.10.1 installed.
Anyone have any guidance?

The usual location for iTunes media is indeed <User's Music>\iTunes\iTunes Media however you can set up iTunes so that you can add in media stored in other locations such as an external drive. Check the setting under Edit > Preferenecs > Advanced for the location of the media folder in case you changed it at some point. You can see the location of any individual file by right clicking on it and clicking Show in Windows Explorer.
tt2

Where to Check Signature Logs

I am getting the following error during signing.Please Help
SecurityException in method: verify( Message, byte[], CPALookupObject ). Message: SecurityException in method: verify( Message, byte[], CPALookupObject ). WSSEThread-Exception: SecurityException in method: run(). Message: [com.sap.ASJ.wssec.030191] The found signature was not valid. Check signature logs for details.. To-String: com.sap.security.core.policy.exceptions.VerifyException: [com.sap.ASJ.wssec.030191] The found signature was not valid. Check signature logs for details.; To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: run(). Message: [com.sap.ASJ.wssec.030191] The found signature was not valid. Check signature logs for details.. To-String: com.sap.security.core.policy.exceptions.VerifyException: [com.sap.ASJ.wssec.030191] The found signature was not valid. Check signature logs for details.. To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: verify( Message, byte[], CPALookupObject ). WSSEThread-Exception: SecurityException in method: run(). Message: [com.sap.ASJ.wssec.030191] The found signature was not valid. Check signature logs for details.. To-String: com.sap.security.core.policy.exceptions.VerifyException: [com.sap.ASJ.wssec.030191] The found signature was not valid. Check signature logs for details.; To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: run(). Message: [com.sap.ASJ.wssec.030191] The found signature was not valid. Check signature logs for details.. To-String: com.sap.security.core.policy.exceptions.VerifyException: [com.sap.ASJ.wssec.030191] The found signature was not valid. Check signature logs for details.
Thanks
Mridul

Hi Mridul,
Use XPI Inspector to get detailed error log.
Michal's PI tips: XPI inspector - help OSS and yourself
Michal's PI tips: XPI inspector - new functions and features (graphical message flow display)
Also check below useful links:
How to Load keys and certificates in SAP PI 7.3, SAP PO 7.3 EHP1 NWA's Key Storage
Configuring WSSE (digital signing and encryption) using SAP PI 7.11 AAE SOAP Adapter

Has anyone else had an issue where Mail.app signatures and rules disappeared?

For unknown reasons, I lost all my Mail.app signatures and Rules on Oct 10, 2012 at about 9:00AM PST.
Anybody else see something like this?
Also, I am getting sandboxd warnings that are Mail preference related....
I am guessing that the preferences access error that the sandboxd is having is related but who knows...
Anybody seen these kinda log messages?
11/8/12 6:08:53.579 PM sandboxd[1589]: ([423]) Mail(423) deny file-read-data /Library/Preferences/com.apple.mail.plist
repeated many times per hour.
there also seems to be a problem with the mdworker process .... that is perhaps related to the Mail issue....
Oct 9 00:37:26 mbp15.thaijavaworks.net mdworker[5984]: Unable to talk to lsboxd
Oct 9 00:37:26 mbp15.thaijavaworks.net mdworker[5983]: Unable to talk to lsboxd
Oct 9 00:37:26 mbp15.thaijavaworks.net mdworker[5985]: Unable to talk to lsboxd
Oct 9 00:37:26 mbp15.thaijavaworks.net sandboxd[5987] ([5984]): mdworker(5984) deny mach-lookup com.apple.ls.boxd
Oct 9 00:37:26 mbp15.thaijavaworks.net sandboxd[5987] ([5983]): mdworker(5983) deny mach-lookup com.apple.ls.boxd
Oct 9 00:37:26 mbp15.thaijavaworks.net sandboxd[5987] ([5985]): mdworker(5985) deny mach-lookup com.apple.ls.boxd

I think this is an issue with the phone's proximity sensor (the one that turns the screen off when you hold it up to your ear). It's a bug that seems to occur when you switch to another app (any app) while still on a phone call. You'll notice in Messages that the screen goes dark when you move your thumb over the earpiece/iSight camera, but not when you move your other thumb.
Simplest solution is to force-quit the Messages app (double-click the home button, and swipe up on the app). The problem should resolve itself when you restart Messages.

Where are our signatures?

Since yesterday the 9 signatures I had setup on my laptop have been blanked - nothing in the signatures. My iMac has been asleep, I have not rebooted, I have installed Things
This has also happened on my colleague's MacBook Pro, she has not installed Things or anything else.
I did a clean install of ML on another MacBook Pro in the office last night but that has a different Apple ID.
Anyone got any idea what happened????

As far as I was/am aware the signatures were local to my machine's Mail. This is also the case on my colleague's MBP.
Also just noticed that the rule I had setup for the emails from this forum has gone......

Where did my signature button go?

I used to be able to convert pdf to word and sign docs under my signature button and now it seems to be gone

Hello,
Please try to repair the Adobe Reader installation on your machine.
~Deepak

Where did my signature go?

on Mac Pro - upgraded to XI. Last week could sign docs but not now! @#$@^%

Hello Lone Tree,
Can you let us know if you are signing the document using Adobe Reader XI?
If that's the case, you can refer to this link:
EchoSign Help | Sending | Adobe Reader / Acrobat | How to sign/send
If the fields under Sign are greyed out, then I would recommend you to use "Only I Sign" feature by logging into EchoSign.
Here is the link:
Sending | EchoSign Web | Only I Sign
Let us know if you need more help.
Regards,
-Rijul

Where is signature pop up in Mail?

where is the signature pop up menu in Mail 7.2?

Okay. I found it. Disregard this question. Thank you.

Body and Signature not getting in reciever mail adapter

Hi Friends,
My requirement is the reciever mail adapter having the Attachment and Body and signature.
Here i am getting Attachment only. I am not getting Body( example: the ftp successfully genrated this file abbc_12/03/2014.txt) and Signature.
Signature like
Thanks
company name.
Thanks
Bhanu

Hi Galla,
I have some doubts about your scenario, Is your scenario FTP to MAIL?, do you want to send the file as attachment or you want the file content as mail body or where the body is taken? where is the signature, inside the file?
Meantime, you can check these documents about file-mail scenario:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a27c01-26b0-2c10-bd8a-94498efa7ff6?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5083371b-5bd2-2e10-3f8b-ad877d24c9ce?QuickLink=index&overridelayout=true&52475910426407
Regards.

Digital Signature Business or Legal Scenarios in Order to Cash

Dear Gurus
Can any one suggest me the different process in order to cash cycle where in digital signature could be implemented for various outputs, if you know any such business or legal scenarios???

Dear Yael,
Please go through the following link:
http://help.sap.com/saphelp_sm32/helpdata/en/a0/c3266e44c54d5e8300b5ffe54f756b/frameset.htm
You can also download from SAPinsider:
http://www.sapprojects2006.com/sessions/3.cfm?track=3&usergroup=regular
Reward points if it is helpful.
Regards,
Naveen.

Digital Signatures with Smart Cards

Hi folks,
It is my first time with digital signatures on R/3 system. Im at customer that uses smart cards (hardware cryptography). We are doing the SAPCRYPTOLIB and front end installations. After finish these tasks, we need to implement the signatures into 3 workflow processes. I already read the SSF programmers guide, API specifications and SSF user guide. But I still have some doubts:
The SSF profile is stored into smart card with private key information, but where are the public keys stored? (PAB Private Address Book of my trusted circle).
Do I need the CRLs? Note: this is only for workflow processes that run inside of customer landscape; this is not a B2B scenario.
We dont have clear yet how we sign the data; we are thinking sign a BOR object. Create an attribute and use it to pass the signer data. Note: for the customer, the objective is user authenticity guarantee.
The BOR object instance ends when the flows finish, so wee need to store the signed data for auditable reasons. A database table can be a good approach or there is another standard way?
P.S.: anyone have documentation about this subject, something like how-to with guidelines?
Thanks in advance,
Ricardo.
Message was edited by:
Ricardo Quintino

The SmartCard device is present at the frontend PC - and that's the place where the digital signature operation has to take place. Important is the "What You See Is What You Sign" principle: it has to be ensured that the data that is to be signed (using the private key stored on the SmartCard) is exactly the same as the one that is displayed to the user.
Notice: there is a different scenario where the server is signing the data (after prompting the user for userID and password and validating that information).
The signed data is then transported back to the server where it is stored (to ensure auditibility); usually you'll have to keep the (archived) data for years; the public key need to be archived as well.
Notice: it is possible to attach the certificate (-> public key) which has been used to sign the data to the signed data.
Regards, Wolfgang

Where is my signature?

Similar Messages

Maybe you are looking for