Where is navigate to page within skip logic?
When I click on skip logic, I don't get an option to click on navigate to page.
The following post provides an introduction to the "navigate to page" feature.
http://forums.adobe.com/message/3763831
Regards,
Brian
Similar Messages
-
Just upgraded to 5.0
The URL in the WOnder Bar doesn't change when I switch from one tab to next.
For instance, I'm currently on this page, but I don't see the URL. What I see in the wonder bar is the last url I typed in: mailchimp.com.
Also, sometimes I get "new Tab" and when I type the URL, the Title tag does not come up on the tab, it stays as "new tab."
SOmetimes I click on a link and FireFox page comes up blankThere have been a couple of different extension that have caused that problem. You'll need to do a little troubleshooting to determine which of your extensions is causing that.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
Skip Logic option does not appear
12.12.2013
I watched the videos, updated today 12.12.2013, and the option for Skip Logic does not appear when inserting a page break as shown in the video. Is there another add-on that I need to purchase?
This would make matters less confusing for people to check off options so they see only what they need to rather than pages of stuff they do not.
Can someone help me with this, please.
~SLeeRostI am guessing you are likely in "Page View"
Skip logic is only for "web" forms and not PDF. There are two "View" modes in FormsCentral, "Web View" for designing web forms and "Page View" for designing for PDF, you can use both and distribute both ways, but the options not available in PDF such as Skip logic are not shown in Page View.
To switch to Web View use the "View" menu at the top or click on the "Page View" at the bottom right corner to toggle to Web View.
One other possibility is that you are using the FormsCentral desktop application, if this is the case you need to be signed into the application/service and need the form to be "online" which you can do from the "Collect responses online" tab once signed in.
Thanks,
Josh -
I am trying to skip logic a page, but my form fails to do so
In my form, the deadline to submit an abstract has passed, so I would like to skip the pages which ask for contributed talk information. Yet, in every iteration, the form fails to skip those pages. I've tried everything, and nothing works.
The only way I could hack a solution is to go to all of the different fields on those two pages, go "Show/Hide" on each field, and then hide if "any" condition was met, where the condition was a Yes/No question from before (and I hide if they said either of Yes or No).
If I were to guess, it looks like since the form has already accepted information from those fields, it refuses to skip over those fields for future submissions. But this is a problem, of course, because I don't want to write a brand new form that includes everything BUT those two pages. (And then later have to integrate the two separate databases.) The whole point of "skip logic" is for a user to "show and hide certain parts of a form", right?
This smacks of a bug, as far as I can tell.Dear Brian,
Thanks for responding, and I appreciate the suggestion. I think I am
following exactly what you are saying, and I agree with you. The
details: the pages with the "submit abstract" fields are on pages 6 and
7. I thought I could, at the end of page 5, say, "Skip directly to
page 8". I clicked the correct button at the bottom, I said "Skip
directly to page 8", yet, the form fails to skip. I tried it on the
"Test your page", I tried it on the live form, I tried everything.
I clicked every button on the Adobe Forms website associated with the
form, and no matter what incantation I pick, I can't get pages 6 and 7
to go away.
I believe that I am correctly interpreting what Adobe advertises as
"skip directly to page", but it simply isn't working with my form in
this particular case, and for what reason I have no idea. I wanted to
submit a bug report but the only thing I could find on their website
was "Start a discussion."
Even though I can't make the entire pages go away, I managed to get the
fields to go away by that "show/hide" trick, where I am hiding the field
regardless of what the user enters previously. Clearly, though, this
isn't the right way to make pages 6 and 7 go away, and if I knew what
peculiarity about my form was rendering 6+7 inviolate, I would change
it.
I was a bit surprised, frankly, because up until now everything about
the form (and FormsCentral in general) seemed pretty slick - I was
impressed. Now, in the moment that I need these pages to go away, here
I am, hacking again.
If you'd like to see the form in action, you can find it at
http://ohiomaa.org/register/
Thanks again - I don't know that there is a solution here, and even if
there were, it's going to be too late by this Friday anyway.
Regards,
Jay
On Tue, Oct 21, 2014 at 2:30 PM, brian.filipiak <[email protected]> -
Hpw tp call a 'Page with Flow Logic' from within a View
Within the same BSP, I have the requirment to call a page in the ;Page with Flow Logic' section from a page in the 'View' section.
Is this possible and if it is, how do I do it? I have tried some calls but they all have failed.
Thanks
Glennin the view you want to navigate then try
<bsp: call > or <bsp: goto> htmlb tags. or else you can use window.open method and open in a new window. -
Can anyone help on integrating Unifier with WebCenter Portal ? We are looking for a solution where we can show Unifier pages within WebCenter Portal application. Is this possible ?
If you simply would have posted here first, there are plenty of people who would have informed you of the current policy to have a data plan active on an account during the entire contract if purchasing a discounted smartphone.
Unfortunately, there are just as many on here who would claim the people informing you about this policy of being Verizon plants spreading disinformation and trying to make people afraid to upgrade via this route.
Yes this is a new policy, one which has been pointed out multiple times in these forums. Good luck, but I doubt you will have an outcome over this which will make you happy.
Verizon is closing as many loopholes to keep unlimited data as they can. -
When navigating the internet, if I come across a web page that has a link to open a picture or program in a new window, if I click on it, it does not open. Firefox immediately looses functionality in that I cannot open a new tab with the mouse wheel, right click to open a new tab, or use my bookmarks in either the drop down or toolbar to navigate away. I can usually still navigate the page that I am on, for example, (https://loanconsolidation.ed.gov/AppEntry/apply-online/appindex.jsp), when it freezes I cannot click on any of the content at the center of the page but I can still use the links from the list on the far left. For an example of the pictures, (http://www.insect-sale.com/), if you click on "New Arrivals" at the top of the page it takes you to a list of products that can only be viewed by clicking on them. Usually a picture of the item would open in a small window but it does not and Firefox freezes. This has also happen when I try a view a degree audit on a school's website where a program would usually open in a new window. The only thing I have been able to find that still functions properly when this happens is the home page button. I can click on it or use the wheel to open it in a tab just fine, but if I try and go anywhere else I cannot. The only way I can get Firefox back to normal is to use the Task Manager and end the process. Another thing I have noticed, that may or may not be related; is that my Norton Internet Security toolbar, that should show up below the bookmarks toolbar and above the tabs, only shows up about 1 out of every 10 times I open Firefox. Some days it doesn't show up at all. If it does show up and I log into Identity Safe, the autofill for the programed website works, even if the toolbar doesn't show up the next time I open Firefox.
Go to Tools->Options->Apps
Here you should see two columns: Content Type on the left, Actions on the right.
Find and select excel spreadsheet or any other content type in the left column. There should be a corresponding action in the right column. What is it? You can use the drop-down list to select the option you want:
Always Ask - Firefox will ask each time: What do you want to do with this file?
Save file - Firefox will save this file to your computer
Use - Firefox will give this file to the program to open it
In case of saving, Firefox will either prompt you every time where you want the file to be saved, or save it to the default location. It depends on the preference in
Tools->Options->General->Download -
How to merge pages within the same document?
Can I merge pages within the same pdf document? I have two large maps, an east and west, can I put the two pages together to make one map?
How different are the layouts?
You can vary the left and right pages:
+Inspector > Layout > Section > Configuration > Left and right pages are different+
But the position of the headers, footers and margins will be the same.
You could make different designs and capture those but each would have to be its own section. This sort of thing works better in Layout mode, where every page is a different section, but you won't get automatic text flow nor TOC, footnotes etc.
Pages rapidly gets very clumsy when you try to do detail layout to this extent.
Peter -
How do I move a section of Pages within a document ?
Hi there,
I am writing my thesis and I want to move a group of 6 pages (representing a chapter) from one area of my document to another. I inserted a 'Section Break' at the end of the page preceeding the first page of my grouping, and inserted another at the end of the 6th page of my grouping. I've done this for all the chapter groupings of my document.
When I look at the thumbnail view on the side of the document, I can see that each chapter grouping is enclosed by a yellow line box if I click on a page within the chapter grouping. So far so good, I think. Except now when I click of one of those groupings and try to drag it and insert it in between two other other chapter groupings i.e. I'm trying to reorganise my chapter order, it doesn't move the section I want to move at all.
Can anyone tell me what I'm doing wrong ? Thanks in advance.
Matt.Thanks for your advice Peter.
I continued to play around with trying to move the sections around (I didn't change any sectioning to what I had previously done). I found out - and I don't know why - that I could not move sections upwards as I was trying to do...only downwards.
So I eventually reorganised my sections by strategically moving them downwards until I had the document looking like I wanted it to. Still strikes me as odd. It was like doing one of those puzzles, deciding which block goes where without moving up, in as few moves as possible - but I eventually got it done. -
In MVC, do i need a View or Page with flow logic for POPUP window
Hi All,
I have the below scenario using the MVC pattern.
I have a main view with 3 trays, each tray has two buttons, for example first tray has Create Order button. When I click on this button, I need a popup window to come with a tableview and a button(Create), where I select some rows and click on the button Create to create order.
But as per the MVC pattern I canu2019t call the view (popup) from another view(main view). So should I create a VIEW or PAGE WITH FLOW LOGIC for the popup? .
I need 6 popup to be called from the main view and once the function is done close the popup.
Please suggest me the flow for this scenario.
Cheers,
Srini.Srini,
1. You can call the view in pop-up because you will be calling the controller using open.window.
Here is the sample code:
method DO_REQUEST .
data:
li_vw type ref to if_bsp_page,
lv_form_field type string,
li_md type ref to zcl_model01.
dispatch_input( ).
li_md ?= get_model( 'm01' ).
lv_form_field = request->get_form_field( 'invoice_create' ).
if lv_form_field is initial.
*------ Request to display main page
li_vw = create_view( view_name = 'main.htm' ).
li_vw->set_attribute( name = 'model' value = li_md ).
call_view( li_vw ).
elseif lv_form_field eq 'true'.
*------ Request to display Invoice page in pop-up
li_vw = create_view( view_name = 'invoice.htm' ).
li_vw->set_attribute( name = 'model' value = li_md ).
call_view( li_vw ).
endif.
endmethod.
Layout:
function do_Invoice()
{ var s=0; r=1; w=300; h=300; x=screen.width/2;
x=x-w/2;
var y=screen.height/4;
y=y-h/2;
popUp=window.open('main.do?invoice_create=true','win','width='+ w
+',height='+ h +', left=' + x +',top='+ y +');
Option2:
Ofcourse you can't bind the model in page becos those are 2 different things. But all you need to do is access the model to get some value. To know how to access the model from Page w/flow logic look at [this link|Passing model reference to a page in a Popup].
Raja
Edited by: Raja Thangamani on Apr 14, 2009 11:22 AM -
Hyperlink from within a Word Document to a specific page within a PDF document.
I was hoping that someone would be able to assist me. I would like to create a hyperlink (used as a citation) on my Word document that opens directly to a specified page within a PDF document (possible other word docs and so on, but less
often). How do I go about performing this? Another note, all the documents would reside within a SharePoint site.I was hoping that someone would be able to assist me. I would like to create a hyperlink (used as a citation) on my Word document that opens directly to a specified page within a PDF document (possible other word docs and so on,
but less often). How do I go about performing this? Another note, all the documents would reside within a SharePoint site.
I am not a Word guru, but I don't think you can run a macro from a hyperlink. But you can create an active X label that runs a macro when clicked. You can use the following macro to go to a specific page in a PDF file.
Sub OpenPDFPageView(DisplayPage As Integer)
'In order to use the macro you must enable the Acrobat library from VBA editor:
'Go to Tools -> References -> Adobe Acrobat xx.0 Type Library, where xx depends
'on your Acrobat Professional version (i.e. 9.0 or 10.0) you have installed to your PC.
Dim PDFApp As AcroApp
Dim PDFDoc As AcroAVDoc
Dim PDFPageView As AcroAvPageView
Dim PDFPath As String
Dim DisplayPage As Integer
PDFPath = "C:\Users\doudou\documents\test1.pdf"
'Set the page you want to be displayed
'DisplayPage = 3
'Initialize Acrobat by creating App object
Set PDFApp = CreateObject("AcroExch.App")
'Set AVDoc object
Set PDFDoc = CreateObject("AcroExch.AVDoc")
'Open the PDF
If PDFDoc.Open(PDFPath, "") = True Then
PDFDoc.BringToFront
'Maximize the document
Call PDFDoc.Maximize(True)
Set PDFPageView = PDFDoc.GetAVPageView()
'Go to the desired page
'The first page is 0
Call PDFPageView.GoTo(DisplayPage - 1)
'Set the page view of the pdf
Call PDFPageView.ZoomTo(2, 50)
End If
Set PDFApp = Nothing
Set PDFDoc = Nothing
On Error Resume Next
'Show the adobe application
PDFApp.Show
'Set the focus to adobe acrobat pro
AppActivate "Adobe Acrobat Pro"
End Sub -
I have Firefox 3.6.13 on a high-resolution (1920x1200) laptop screen. It used to be that I could CTRL+ and zoom in on a website such as Facebook.com or NYT.com once, and then every time I clicked on a page within that site, such as one individuals' Facebook profile or one NYT article, it would remember my zoom settings and allow me to read comfortably. However now, every time I click on a new page, it resets the zoom to the default, which is very small font. The default is way too small for my eyes. This is becoming a huge problem as every time I navigate to a new page, I have to squint to see what's there and resize/zoom. I have to do this thousands of times a day??
If you need to increase (or decrease) the font size on websites then look at NoSquint or Default FullZoom Level.
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592
If you need to increase or decrease the size of fonts and other elements in the user interface and web pages then increase the String pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 steps to see what works best.
In current Firefox versions this pref is a String value parsed to a float and allows to fine tune the dimensions of all elements (user interface and web pages) more precisely.
See also http://kb.mozillazine.org/about%3Aconfig -
Go to a specific page within the PDF
Hi,
I try to figure out how to make a link to another page within the PDF doc.
I tried with a button, but cannot specify the page number where I want the link.
Does anyone can help me to make a link on a specific page within my doc?
thanksThis article should be of some help: http://acrobatusers.com/tutorials/how-do-i-link-button-specific-page-my-pdf-document
-
How to insert a page within a document
I need to insert an additional page within a document without reformatting my layout.
How do I do that?
--- So far "Insert" > "sections" > "text page or blank" puts the additional page at the end of the doument.
Tips anyone?
(Pages 09 version 4.3)Luanne,
When you Insert a Section from the Add Section tool or the Insert Menu, the new section will be inserted directly after the current section, the section that the Insertion Cursor is in, or the Section Selected in the Thumbnails pane.
You can't insert a new section in the middle of an existing section, so it goes at the end of a 1-section document, which is what I would guess you have, a 1-section document. What you probably should do is insert a Section Break at the point where yiu want to add a section or page. Or forget about adding a Section and just Insert a Page Break there.
Jerry -
How to call the Page Fragment in Page with Flow logic
Hi,
I am new to BSP, My requirement is to created 1 page fragment which contains the Logo. and to create 2 pages in flow logic
The logo has to apper in Pages with flow logic Pages. My question is how to call the PAge fragment in the 1 &2 pagesin page with flow logic
Thanks,
sureshSuresh,
There is a very enriching portal help.sap.com where you can find all basic and good documentation .
http://help.sap.com/saphelp_nw04/helpdata/en/77/8a54d7434ff34784272a3df98ab645/content.htm
the above link is from that portal.
Before asking such basic questions please at least try to find or do some research yourself.
There are standard applications like HTMLB_SAMPLES and SBSEXT_HTMLB and more for sample applications.
Regards,
Anubhav
Maybe you are looking for
-
Connecting Macbook to Sony Bravia 32" - Won't fill screen and not clear
I just picked up a Mini-DVI > DVI and DVI > HDMI cord today from my local Apple Store and hooked up my Macbook to my new Sony Bravia 32" HDTV. Unfortunately, I having some problems setting it up. My issues are: - I'm not sure how to make my TV the MA
-
Where did the Forums Search function go???
Hi All, I can't find the search function in SDN forums anymore, where is it? I'm wondering if i'm the only one or if it has been moved and i'm just too stupid to find it.... Thanks MK
-
Export XMP Files + DNG?
If I currently have all of the RAW images within my Lightroom database in the DNG format, do I have to worry about exporting the XMP data to the files (using the 'Export .XMP Metadata to File' menu option)? What about the Preference setting to 'Autom
-
Archive Link problem with redundant document names
Hi all, I have a tricky problem in archive link. I would like to attach some different documents to an HR/PD Organisation unit ( objekttyp pdotype_o ) All customizing works fine but the problem is, all documents attached to one busines object ID have
-
Re: Windows Mail - Server Terminating Connection w...
Just joined the forum. I have had this problem for months now and thought it was my laptop which was getting very slow. Setting up Outlook on a desktop PC I find I have the same problem so started looking on the web for answers and found this thread