Where is OBI Publisher log

Like in OBI Answers where one can find SQL log in Session Management, where can one find SQL log for OBI Publisher?
Thanks

You don't have the same system than in presentation service.
You must set the log level as debug in Admin > Server Configuration page.
Restart BI publisher and you will see all debug information on the OC4J console.
You can also configure a debug level with a file. See configuration with EBS.
http://blogs.oracle.com/xmlpublisher/2007/05/get_logging.html
Cheers
Nico

Similar Messages

  • OBI Publisher 11.1.1.5 install questions

    Hello,
    I am new to OBI Publisher. I need OBIP for production PDF reports that are initiated through an APEX webpage.
    I am installing all of these on the same server:
    11.2.0.2 database
    Oracle HTTP Server (OHS)
    OBI Publisher
    I am having trouble installing OBIP. I ran the 11.1.1.5 RCU and selected the OBI component/schemas. The RCU went fine. However, at the end of the OBI install, I received an error at the "Creating ASInstance" step.
    Here is a snippet of the error log:
    [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000JGFm4uPFw000jzwkno1ErHoD00000Q,0] Created ASInstance. Calling opmn start command
    [as] [ERROR] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000JGFm4uPFw000jzwkno1ErHoD00000Q,0] [[
    oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
    Operation aborted because of a system call failure or internal error
    at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
    at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
    at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
    Any assistance is greatly appreciated.
    Thanks,
    Reid

    Reid -- I suggest you log a service request with Support for this issue
    Mike

  • Where to find BIP log file in version 10.3.4.1

    OBIEE 1.3.4.1 on Linux. I have set Server Configuration option Debug Level=Debug. But where can I find the error log file. Often I see error The report cannot be rendered because of an error, please contact the administrator. when configure a report, where can I find the error log?
    Search the furom and find a post talking about log file for 11g in. Found it. BIEE_HOME\user_projects\domains\bifoundation_domain\servers\bi_server1\logs\bipublisher
    But it is not the case in 10.3.4.1.
    Thank you for help.

    Hi,
    Please take a look at this post:
    http://bipconsulting.blogspot.com/2010/01/bi-publisher-logging-debugging-part-3.html
    If your question has been answered then please grant the points and close the thread
    thanks
    Jorge

  • OBI Publisher Data Template

    Hi all
    Please can some one tell me where can i find description about Data Template .
    I want to call a PL/SQL Proc inside some package and get data from it.
    I am using OBI Publisher to create new report and defining data model in it.
    Please guide me to some good online tutorial ablut data templage.
    Thanks a lot
    Amit

    Hi,
    You can get some info about DataTemplate (structure etc.) in OBI Publisher Report Designer`s Guide.
    If you want to call PL\SQL procedure you should define your default package and then call proc from it in DataTrigger section.
    Read this guide for additional info and examples =)

  • Publisher log file

    Hi all, I'm having issues with the email setup in 11g Publisher. Does anyone know where I would find log file information to get further insight into the error of 'deliver failed'? I assumed it would be in the NQSERVER log now that Publisher and BI is so integrated but it doesn't appear to be. Thanks!

    Found it. BIEE_HOME\user_projects\domains\bifoundation_domain\servers\bi_server1\logs\bipublisher

  • How and where to access the logs in OpenUI5

    If I am using logging in OpenUI5 with
    jQuery.sap.log.info debug etc then where can see these logs when I run web page ,it does not come on console.

    I expect it's due to the logging level, the default setting for the productive minified javascript is Error, so will only display the FATAL or ERROR messages in the console.
    If you switch to use the -dbg version the ldefault logging level is DEBUG, so should display your logging.
    https://openui5.hana.ondemand.com/docs/guide/Configuration.html
    logLevel
    0|1|2|3|4|5|6| NONE|FATAL|ERROR| WARNING|INFO|DEBUG|ALL
    ERROR
    Sets the log level to the given value. For minified (productive) sources, the default level is ERROR, for debug sources it is DEBUG. At runtime, the log level can be modified with  jQuery.sap.log.setLevel
    Regards,
    Jason

  • Regarding where can I check logs to see which user ID did it and when

    Hi,
    In RSA1, if some one deletes the source system, where can I check logs to see which user ID did it and when.
    Please help me..
    Thanks.

    Hi,
    Check if there is any job in sm37 with DEL ans user as *. Perhaps you may get some clue.
    Bye
    Dinesh

  • OBI Publisher 11.1.1.5 Desktop add in not showing in MS word

    Hi Experts,
    I have installed OBI Publisher Desktop 11.1.1.5 and OBIEE 11.1.1.5,
    I worked with Publisher, and created template and reports.
    Once I tried to insert pivot table into template and clicked on preview button,
    I lost the Add-in into MS word 2007,
    I have reinstalled both MS - Office 2007 and BIP Desktop but didnt got Add-In in MS-WORD,
    Thanks in Advance

    Reinstalling Office is a bit extreme. All you needed to do was click on the Office button and view add-ins.
    Similar to:
    BI publisher on Microsoft word dissapeared

  • Regarding where can I check logs to see which user ID

    Hi,
    In RSA1, if some one deletes the source system, where can I check logs to see which user ID did it and when.
    Thanks
    Vasu.

    Transaction RSA1 "BW Administrator Workbench"
    Users need an authorization for object S_RS_ADMWB with field RSADMWBOBJ = "SOURCESYS".
    Source systemes are stored in table RSDS. Table change log is not active (see transaction SE13) but as far as I can read the source code some critical events are logend in the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/c8263712c79958e10000009b38f936/frameset.htm">Application Log</a>. View the entries for object LSYS_DELETE_<logsys> with message 618(RSAR) using transaction SLG1 .
    Kind regards
    Frank

  • Location where the change document log is stored

    Hi all,
    In SRM bidding process, I need the initial bid price and the final bid price, quantity before negotiation and after negotiation, PR or project number for that bid invitation number. Can anyone tell me where these are stored. Actually I want to know where the changed document log is stored.
    Regards,
    Asha

    Hi Asha,
    AFAIK there is no Project Number in Bidding Engine.
    Until Quote versionning (SRM 6.0 ?), there is no other way than looking at change documents.
    All changes are stored in change tables: CDHRD and CDPOS.
    You can try to reuse FM BBP_CHANGE_DOC_GET_NEW.
    Rgds
    Christophe
    PS: please reward points for helpful answers.

  • OBI publisher on Jboss Server AS7 [login failed]

    Hi, I've deployed OBI publisher on Jboss Server AS7 but when i try to authenticate with Administrator/Administrator the response is login failed. Thanks for your support i'm blocked

    Thank you for the replies and I am trying to answer the questions in your replies here
    Kranthi : To open in online mode,the BI server should be up so it accepts the password and then directs you to the layout. That is the case, I have OBI server up running and accept login from Answers page.
    Kranthi: first you should go through about offline/online modes before proceeding further.You can go through this from the BI answers user guide. The BI Answers user guide I found is OBI Answers, Delivers, and Interactive Dashboards User Guide, B31767-01 for Version 10.1.3.2. I could not find info for security management or login/password. Can you be more specific?
    Srinivas Malyala: Cross check are you accessing Linux Box rpd on WindowsWhich credentials are you using LDAP or DB etc
    Have you properly configured DSN to access Linux RPD. >
    I am not sure how OBI RPD authenticate logins. I am not using LDAP. I do not have a user Administrator in my Oracle database. Thus it does not appear authenticated with DB.
    I have a DSN configured on the window box, and be able to import database objects.
    Srinivas Malyala: Can you update us exact error message. The only message is "Logon failed." Too bad I cannot attach a file to show the message box. But you can get the same message when you login to the window Admin Tool online or offline with a wrong password.
    OBIEE developer : chk whether the rpd property is read only.. How? But I know if I open it offline, it it says the rpd is read-only. That is because it is opened by the server.
    OBIEE developer : or try this once if all fails to reset the pass..http://obieetricks.blogspot.com/2009/08/obiee-tips-tricks-for-ease-in.html >
    Like to try it but afraid get things more confused before I understand what is going on. I have not loss my Administrator password, I can login offline, I can login to SH Answerers pages.
    Is offline suppose to have the same password as online?

  • Where do i publish my app?

    Hi ho, I wrote my small, tiny app, which I'd like to publish, public domain licence or GPL or maybe CC that only forces redistributers to tell my name, I'm not quite sure yet (I like GPL, but it should be a licence that's compatible with GPL AND creative commons).
    Question is: WHERE DO I PUBLISH MY APP?
    It's tiny, has a cool icon, improves life for a number of people and is easy to install and uninstall. It's completely German, too (user interface + code).
    I don't feel like spending money on running a server where folks can download it. I don't want to earn money with this app, but I don't want to spend, either.
    regards,
    rdigel

    You should be able to host it on SourceForge. I don't know the details about what would be required, but that sounds like what you are asking for. Also, see about what (if anything) you need to do to get it published on Freshmeat too.

  • Webbinding of OBI Publisher failing (OC4J contained into OAS)

    Hi
    I;m deploying OBI Publisher (earlier XML publisher) xmlpserver.EAR using OC4J contained into Oracle Application server. The deployment is getting successful. But when Binding Web Modules to a Web Site After Deployment it is giving me an error
    BindWebApp error: oracle.oc4j.admin.jmx.shared.exceptions.JMXRuntimeException
    Anyone of you have ever faced this problem. Do I need to put certain jar files in shared library.
    Regards,
    Parwez

    Solved it myself.
    For the benefit of others:
    It is possible to use oracle_proxy plug-in for OC4J stand-alone.
    Crucial points for the configuration are:
    - oracle_proxy config file specified correctly
    - xmlpserver roles specified correctly
    - right ports specified in instanceconfig.xml and xmlp-server-config.xml
    Regards,
    Michal

  • OBI Publisher display user role

    Hello,
    I have googled for a few hours but cant find a global variable to display the user group(s) on the OBI Publisher report.
    Is that possible without setting up a session variable in the repository (because right now we use OBI without the BI Server repository). If it does not work, how
    do I access a OBI Repository session variable in OBI Publisher? From somewhere I need to get the runtime session user groups.
    Thanks

    The LDAP is configured correctly now. I created a BIConsumer_new catalog group in the presentation services admin console. I can use that
    console to set the permissions for the BI publisher report (somehow it does not work when I try to set the permissions using the bi publisher admin page - the permissions window does not open).
    the question is still out there. how can I query with that catalog group OR ldap group in the BI Publisher data model?

  • Where are the Planning logs?

    We are on Planning 11.1.1.3.
    where are the Planning logs?
    Some are here:
    hyperion\logs\services\HyS9Planning-sysout.log
    hyperion\logs\services\HyS9Planning-syserr.log
    Are the rest in Tomcat directory?

    Hi,
    Have a look at below post:
    Re: Log file locations - Planning/Workspace
    Cheers,
    Alp

Maybe you are looking for

  • Links in applications do not open

    Just today this started. When I click on a link in any application or email do not open in Firefox. Is this a problem in Firefox Preferences, or with my computer? Thanks for your help. Anne

  • My iMac goes to sleep and does not wake up, the fans also make a loud noise

    My iMac has just had its hardisk replaced, few months ago. Now whenever I go into any website, do downloads and when it goes into screensaver it makes a **** of a noise then when I leave it it does not go into sleep but shuts down. If I try and resta

  • Use of Customer Exit - IP Wad Input ready Query

    Hi All, Can anyone confirm if we can use a customer exit variable(populates a SEQ number) be used in a input layout on IP>>WAD application. In my case it displays the seq number in the header area,but displays the "No rows or cols displayed because t

  • APP-INV-05447 No Open Period Found For Data Entered

    Brother Hussain I am new to this forum, currently I am learning Oracle APPs, I have practicing Conversion In this I am doing Item Import Project. I have done all the process of conversion like from flat file to staging table using sqlldr, then valida

  • How do I install CS3 Prod Prem w/out CD?

    Hello, I have been trying to install CS3 Production Premium to my Sony Vaio notebook, it has 1.5 GB of Ram. The suite's product files were initially saved on my desktop, but never installed. Reason being 512 Ram...So I waited till I got my laptop w/