Where is PSIRT lookup tool for cisco IOS?

Can someone give me the link to a tool that will allow me to paste my version of IOS into and then get a listing of all known advisories/responses?
thanks,

I think the following link is what you may be looking for:
http://tools.cisco.com/security/center/selectIOSVersion.x

Similar Messages

TcL Scripting for Cisco IOS,

anyone has idea how useful this book
TcL Scripting for Cisco IOS,
http://www.ciscopress.com/bookstore/product.asp?isbn=1587059541
thank you

Hi Joe
it is interesting that you are the technical reviewer of this book
i was think to get mid level in Tcl scripting with EEM to give me the ability to implement some automated things
i am good with EEM but Tcl not
will this book take the reader from scratch to tcl scripting ?
thank you and happy new year
Marwan

Security monitoring tool for Cisco ASA

Please suggest a checp and best security monitoring tool for Cisco ASA devices.

You can use ossec, open source tool installed on linux:
http://www.ossec.net/

Cisco Aironet Conversion Tool Version 2.1 for Cisco IOS Software

I am trying to convert a LWAP to Cisco IOS and the tool wants to know the Admin Name*? This is a factory radio sent to me as LWAP. I cannot seem to find out what the Admin Name is, I have tried Admin and Cisco not sure what else to try.

Hi Brian,
That tool is used for the IOS to LWAPP upgrade only. The AP can be converted back to Autonomous (IOS) using the following method;
Reverting the Access Point Back to Autonomous Mode
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
You can convert an access point from lightweight mode back to autonomous mode by loading a Cisco IOS Release that supports autonomous mode (Cisco IOS release 12.3(7)JA or earlier). If the access point is associated to a controller, you can use the controller to load the Cisco IOS release. If the access point is not associated to a controller, you can load the Cisco IOS release using TFTP.
Using a TFTP Server to Return to a Previous Release
Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
Step 3 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, and c1240-k9w7-tar.default for a 1240 series access point.
Step 4 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 5 Disconnect power from the access point.
Step 6 Press and hold MODE while you reconnect power to the access point.
Step 7 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
Step 8 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 9 After the access point reboots, reconfigure it using the GUI or the CLI.
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
Hope this helps!
Rob

Where can I have tools for developing web Services?

I'd like to make Web Services in Java but without making the SOAP envelops by myself!!! I want to do it as esay as do it in Visual Studio.NET. Does someone know a tool for that in Java?

hi,
mine also something similar to ur problem.
I have worked on web services that are supported by .NET
they are pretty easy.
nothing special to do it.
Now what actually i need help for is,
i want a web service written in Java and acess it from a .NET application. Sounds great right?
I want to achieve this
but donno how to proced
though i know Java pretty well, i don't have any idea about Web Service in java.
to achieve web service in Java, is it is as easy as it is in .NET?
i am now trying for some samples..
its just enough for me a simple example in Java.
something like, a web service that is returning a string say "hello world".
what and all i need to do to achieve this?
do anybody know about this?
i need some help on thins....
plz.....
-Soni

Remote Command Tool for Cisco Routers/Switches

Is anyone aware of any tools or scripts out there which allow preconfigured commands to be remotely run again Cisco Router/Switches and display the output result?
I'm looking for a tool which I can give our Service Desk personnel that will allow them to select from a list of commands enter a target IP Address of a router/switch and then the tool will display the vlan table or the running config of a particular switch-port so they can see if its configured on the correct data vlan or its missing its voice vlan etc.
For example a Service Desk Operator needs to check what vlan a switch-port is on. So they open the tool, enter the switches IP address and the port number and select an option like "display a switch-ports vlan" and the tool will login into the switch in the background run a show command on the switch and then output the result.
Thanks.

Check out rConfig. You will be able to run multiple instances of it i.e. one instance for your standard configuration backups and another for more specific configuration downloads info like show vlan bri commands etc for service desk staff to view.
You could also use the IOS menu function and create menus or role based access on each of your devices for your users.
Regards
Stephen
==========================
http://www.rConfig.com
A free, open source network device configuration management tool, customizable to your needs!
- Always vote on an answer if you found it helpful

GUI Tool for Cisco 6500 Chassis

Hi
We have a requirement to allow our Service Desk to amend vlans on switchports on a range of 6509 chassis.
Is there a tool, (like SDM for routers) which would allow them to do this using a GUI? We need to keep it as simple as possible as the Service Desk users have no experience of configuringCisco kit.
We have Cisco Prime, however, I can't see anything which shows a graphical representation of the actual switchports on a chassis?
If there isn't a Cisco product which supports this, does anyone know of a third party app which would do the job?
Thanks
J

Hi datamodule, i see that you are looking for a 24 ports 1/10G SFP module for the Catalyst 6509E. From what i am looking at it's either 1G or 10G. Please check this link for further assistance: http://cs.co/9000YTBE. Feel free to message me for further assistance.
Thanks,
Angela ([email protected])

Monitoring tool For Cisco Switches

Hi All,
I have installed 2 Core Switches and 9 Access Switches (4960-X,3560-X and 2960-X) in our organisation. Now we are looking for a Monitoring tool.
To monitor the Traffic status, Link status, Quarterly Health Check, etc. for all the switches on a single page.
Can anyone please suggest which Cisco Monitoring Tool will suite our requirement.
Responsses will be highly appreciated.......
Regards,
Maazeem.

Have you had a look at Cisco Prime Infrastructure?
http://www.cisco.com/en/US/products/ps12239/index.html
Are you looking only to monitor Cisco devices or other devices as well? There are other tools available also so it depends on your environment, budget etc.
Daniel Dib
CCIE #37149

Where can I find tools for manipulating .INI files?

Doesn't LabVIEW have some VIs somewhere for manipulating .INI files?
Or is that another add-on toolset where NI nickles and dimes you for it?

bmihura wrote:
Doesn't LabVIEW have some VIs somewhere for manipulating .INI files?
Yes. Functions>File IO>Configuration File VIs.
Openg's toolkit has some useful additions (and for << a nickel).
http://www.openg.org/content/section/4/41/
=====================================================
Fading out. " ... J. Arthur Rank on gong."

Vmware tools for cisco acs 5.3

to backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.
How to do this - if possible?

Hi Joe
yes the vmware HA works for us and is enough if you can live with risk of data corruption. (which we never experienced up to now...)
In our case it's good enough to recover from the backup instead of adding more complexity.
regards
Frank

Tools for Cisco Unified Communications Manager CallManager

Hi
What tools I can use to elaborate a design of IP to telephony(CallManager, Unity, etc)

No. UCM-BE is a single-server solution. You can use CME in SRST mode for survivability if the server is offline.

Migration Tool for Oracle 8i

Hi Friends !
I want to migrate Sql Server 7 database to Oracle 8i. For this I have downloaded Oracle Migration Workbench from OTN. Bt when I tried to install it I got message "The Oracle Migration Workbench 2.0.2.0.0 must be installed into an Oracle 9.0.1 Home"
I think the tool provided on OTN is for Oracle 9i. Where can I get the tool that will help me to migrate the databases to 8i ?
Thanks in advance.
Abhi

812294 wrote:
Can anyone tell me where i can download tool for Oracle reports developer for Oracle 10g? can you give me exact link?
Thanks muchI am not clear what software you desire.
http://otn.oracle.com
Edited by: sb92075 on Sep 17, 2011 12:37 PM

What is the best tools for analyzer VoIP

I need ur help, i looking the tool helps analyzer VoIP in WAN/TDM. What is the best tool for Cisco System or wich recommends.
Thxs!

Hey turbot,
Thanks for contacting National Instruments support. Each set of the vis you mention are the latest, and some use similar methods to do the FFT than the other. The SMT is usually the best in most applications. There is also another option in the case of scope, you can fetch FFT data from the driver. The FFT is not actually implemented in hardware, but in the driver, and this is transparent to the user. It's simpler to use, but not as efficient as the SMT.
I hop this answers your questions. Let me know if I can be of further help.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search

Log Analyzer for Cisco devices

Hi all:
Could you please help me finding a Log Analyzer tool for Cisco devices (preferably, free).
Thanks!
W.

In the free arena, many people recommend the Kiwi Syslog Analyzer. Solarwinds bought the product last year and now market a licensed version; but they stil offer a free version as well. See:
http://www.solarwinds.com/products/freetools/kiwi_syslog_server/

Managing ACLs (7600, CRS IOS-XR, GSR) – advise on automation tools for SP

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-fareast-language:EN-US;}
Hello All,
There are many wonderful Service Provider infrastructure hardening documents available from Cisco CCO and CiscoPress.
I have seen many over my life. Sample documents are:
Mannaging ACLs (7600, CRS IOS-XR, GSR) - automation tools, Document ID: 13608
Network Core Infrastructure Best Practices, Yusuf Bhaiji
Cisco Guide to Harden Cisco IOS XR Devices
Each service provider is recommended to enable and configure rACLs, CoPP, block unnecessary control protocols over the edge, Protect BGP peering with interface ACLs and many many more. Unfortunately there is no tool available from Cisco to configure and maintain all those features.
I would like to ask question to NetPro community. Have you seen any working products from Cisco or Cisco partners for ACL management. Lets keep Cisco Security Manager (CSM) aside. CSM is enterprise oriented tool and supporting routers up to 6500/7600.
I’m looking for this tool for few years already. Looks like other Service Providers are using home made developments. Google recently partially published own tool capirca to a public domain (do search on “ACL Management @ Google” or capirca). This is good start but I is missing ACL deployment module (it is not released by google).
Please share you experience!
Cheers!

Where is PSIRT lookup tool for cisco IOS?

Similar Messages

Maybe you are looking for