Where is QTCF.dll? In Photoshop 8
I got an error that said ElementsOrganizerSyncAgent
.exe Unable to locate component.
The application has failed to start because QTCF.dll was not found. Re-installing the application may fix the problem.
Well I uninstalled Photoshop Elements 8 and reinstalled it and then I still got this error message.
How do you find the QTCF.dll and put it back? Jeannie
The QTCF.dll loaded by ElementsOrganizerSyncAgent.exe comes from Quick Time. Download the latest version of Quick Time from Apple and install it.
Similar Messages
-
I completed the installation of Starry Night Pro 7. When I clicked the shortcut a message came up declaring I was missing a QTCF.dll. Where do I get one?
Thanks turingtest2, but I had already done that when I received the message on trying to run. The program requires that it be installed first. I subsequently happened upon an older response in the Quicktime communities that explained where to look for it. It said that in Windows 7- 64 bit versions, QTCF.dll normally resides in Program files(86)/ Quicktime system. I confirmed that it was there but for some reason the program did not detect it on initial start-up. So I thought re-booting would help and it did.
Regards,
Borys. -
I have installed CS4 on a 32 bit WinXP machine so we can use Premier Pro. I have used a customised set up and just installed Premier Pro for CS4 as we use CS5.5 for Photoshop, Illustrator, etc. Install seems to proceed with out error but when I launch Premier Pro CS4 I get an error message twice - QTCF.DLL was not found - then Premier Pro launches. I believe this is a Quicktime error, but I have v 7.08 installed and this seems to work fine independently of Premier Pro.
Has anyone come across this ?
D SteadmanJohn T.,
I think that you are correct, unless one had a dual-boot configuration, as QT Player updates will overwrite the QT Player files, and also update the OS.
When having to roll-back QT Player, I have gotten the error "You already have a later version of QT Player installed," or similar syntax. In those instances, I just Uninstalled the later (faulting) version, then Installed the older (non-faulting) version.
Now, I wait until I see glowing reports on the Adobe Forums, before I update my QT Player, due to so many updates, that mucked up my Adobe programs.
Good luck to the OP, and glad that they finally got the post, where it belonged.
Hunt -
Safari and QTCF.dll - Not fatal but really annoying
Hello everyone. I have Safari + QuickTime + iTunes installed on my Windows 7 x64 box since a long time, but only recently I've found some problems...
Every time I open Safari (5.0.2) its only matter of seconds after an alert pops up saying that QTCF.dll isn't found and that it won't allow the execution of Safari. However, after I dismiss that popup, Safari continues working... Until about an hour or two later shows the same popup. It also happens if I close and reopen Safari.
As I've said, isn't fatal, but its really annoying having to close that popup every time.
I've found that file, and is on QuickTime folder. Moved it to both system32 and sysWOW64 and still shows that popup. Also I've read something about that dll where the answers were "reinstall QuickTime". Well... I've tried to uninstall it to install it again, but it throws me an error about some file that couldn't be removed (I think is that QTCF.dll file).
What do you think? DLL ****? Registry corruption? Thanks in advance
I also have a problem with Top Sites after doing a clean install of Safari 5. It always shows me the same sites, it doesn't change constantly (and those sites aren't pinned). Also, if I delete those sites from it, it won't add any new one. Any ideas?Moved it to both system32 and sysWOW64 and still shows that popup.
Best to move it out of there. Having an old version in there tends to cause a different kind of startup error for iTunes and QuickTime (if the version of QuickTime proper on the PC is updated).
By any chance, have you ever had a version of QuickTime Lite or QuickTime Alternative installed on the PC? Last time I checked, they used to install a copy of QTCF.dll to the system32 directory (on 32-bit systems). Since they use the QuickTime registry entries, your Registry may currently be looking in the wrong place for the QTCF.dll.
Well... I've tried to uninstall it to install it again, but it throws me an error about some file that couldn't be removed (I think is that QTCF.dll file).
Could you try another uninstall and post back with the full filename and filepath of that file, please? (I'd like to see where your system thinks your QTCF.dll is installed just at the moment.) -
APrmr CS4 loosing lnks to media aftr installing QT plugin uninstlld getting errr now mssing QTCF.dll
Starting with Premier CS3 I when I installed QT player I would loose the links or association with the media my projects were linked to. The first time I figured out it was QT but did not understand why. At first I thought it was that update. Since I have tried two times and the same thing. Once I restored the system to a prior date Premier CS3 or CS4 worked fine and the linkage to the media was restored.
We recently tried it again with a new and improved QT after making some updates to Adobe Production premium and it did the same thing.
I then tried restoring the system as usually but now for the first time it is giving me the following error.
This application has failed to start becasue QTCF.dll was not found. Reinstalling applciaiton may fix this problem.
I get it when I start up Photoshop CS4 Extended also.
Is this referring to the QT player plug-in?
Any suggestions. If I have to update QT fine but how do I combat loosing the media linkage?
INVT -
Error Message: "The program can't start because QTCF.dll is missing....."
Full error message: "The program can't start because QTCF.dll is missing from your computer. Try reinstalling the program to fix this problem." I can't start iTunes because of this error. Any advice on what to do?
I have discovered the reason this occurs. It is because the PATH in the environment settings no longer has the path to C:\Program Files (x86)\QuickTime\QTSystem which is where the .dll lives on a Windows 7 computer. Close the application giving you this warning if it is still open and use the following 10-step process to fix this:
1. Search for the path to the QTCF.dll and upon finding it, copy it (Highlight it in the explorer address bar and press CTRL + C.)
2. Open the control panel.
3. Choose System and Security from the left.
4. Choose Advanced system settings from the left and a dialog window pops up with the Advanced tab selected.
5. Click the Environmental Variables... button near the bottom of the dialog box.
(This opens a dialog box with 2 sections: User variables and System variables.)
6. Scroll down through the System variables section so that you can select (highlight) the Path variable in the left column.
7. Click the Edit... button which opens a small dialog box and highlights the entire Variable value.
8. Click once in the Variable value (to deselect the value so you don't mess it up) and then press the end key on your keyboard (to move your cursor to the last character of the very very long string in the text box).
9. Paste (keyboard combination CTRL + V) the path to the QTCF.dll you copied earlier, and add a semi-colon, for example:
C:\Program Files (x86)\QuickTime\QTSystem;
(Note that you don't need a trailing / or the actual .dll name in the path, but be sure to add a semicolon to the end of the path name you paste.)
10. Click OK on each of the 3 open dialog boxes.
There is no need to reboot your computer. You only need to restart the application and ensure that it starts without the warning that the .dll can not be found. -
Application has failed to start b/c qtcf,dll was not found
I recently had my computer serviced by the Geek squad for virus removal, I tried to use itunes and connect my ipod and I keep getting this message by: itunesHelper.exe- unable to locate component. "This application has failed to start because QTFC.dll was not found. Re-installing the application may fix this problem." I have tried to install Itunes and quick time player, but the same error pops up and I can't close the tab. Any suggestions?
QTCF.dll
Let's doublecheck on the current locations of that dll.
Go "Start > Search" and then do an all files and folders search on QTCF.dll. In "More advanced options", make sure the following items are all checked:
*Search System folders*
*Search hidden files and folders*
*Search subfolders*
What QTCF.dll files do you find, and what are their file locations? -
Hi,,
I will give you all information in this first post so it is easier
I have Safari 4.0.5 (531.22.7) And every time i open it up, after a few seconds it errors, 2 times, both with exactly the same text in error dialouge, one straight after the other. The exact text of the error box is:
This application failed to start because QTCF.dll was not found. Re-installing the application may fix this problem.
And i have already tried this. doesnt work, i get the same error(s).
but after the 2 errors, safari does open.. but after roughly 5 mins,, it crashes.. and says Safari has stopped working, close program.. (it has took a few attempts to post this) -.-
My coumpter Specs are:
AMD Turion II X2 M500 2.2GHz
4GB Ram
Windows 7 Home premium
64-bit
ATI Radeon HD 4200
I have looked in control panel at the 'Review Problem Reports'
Safari has.... 48.
The summary on them all is Stopped Working
They all seem to be different Heres the 3 that are most occouring :
Problem signature
Problem Event Name: BEX
Application Name: Safari.exe
Application Version: 5.31.22.7
Application Timestamp: 4b8f94fa
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0000000e
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Problem Event Name: APPCRASH
Application Name: Safari.exe
Application Version: 5.31.22.7
Application Timestamp: 4b8f94fa
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.26.13
Fault Module Timestamp: 4bff35d2
Exception Code: c0000005
Exception Offset: 00005301
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Problem Event Name: APPCRASH
Application Name: Safari.exe
Application Version: 5.31.22.7
Application Timestamp: 4b8f94fa
Fault Module Name: NPSWF32.dll
Fault Module Version: 10.0.2.54
Fault Module Timestamp: 48bed652
Exception Code: c0000005
Exception Offset: 0017fc72
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Extra information about the problem
Bucket ID: 1975724391
i would appreciate all help, and hope ive covered everything here.
Thanks.b noir wrote:
Unusual ... that's actually a QuickTime dll rather than a Safari or Apple Application Support dll.
It has started happeining on other applications.. Adobe now.
b noir wrote:
Is your QuickTime Player currently launching? If not, do you get the same error message when launching that, too?
I have just launched QuickTime several times, but no error? There is an update, version 7.6.7 Do you think upgrading will restore all dll's that are missing?
Edit: The DLL is not present in System32, nor C:\Program Files (x86)\QuickTime\ or any of the subdirectories. -
Hi Can anyone please tell me from where I can download the Photoshop CS6 program I purchased a download (media less) some 2 years ago and all has been OK up to know but I am know having issues and would like to uninstall and reinstall. I have the relevant codes and activation keys but would need to be sure I can obtain the program again before I start. Thank you
Make sure you are dealing with the correct product for the serial number. If the serial number is for a full creative suite then you need to get the suite, not the individual application, and vice versa.
Unrelated to that, in case it helps, here is a link to another site. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html -
Where are Print Presets in Photoshop (CC 2014)?
Where are print presets in Photoshop? (I'm using CC 2014 but the question applies to earlier versions as well.)
I don't see them anywhere.
Illustrator has had them for an eternity -- where you can set paper size, printer type, color settings, magnification, etc.
Where is the same functionality for Photoshop? And if it doesn't exist -- why not? It makes no sense.Yes they are different apps -- one does raster, one does vector - but they share the need to allowing printing from time to time, and there's no reason why the printing interface should be radically different.
Unquestionably, Print Presets would be very useful in Photoshop.
I know where all the settings are -- I want to have a preset so I don't have to keep setting the color management and magnification and everything else each time I want to output to a particular printer. -
Where can I download Adobe Photoshop CS4 Ukrainian version?
Where can I download Adobe Photoshop CS4 Ukrainian version? I can't found any download link in my account, only product key available.
Privjet!
You can download the old versions here: Download and Installation Help | Download and Installation Help (Scroll the page) but there is no Ukrainian version. -
eversince i tried to upgrade my electric turned off and something got lost from my origional itunes now i cant uninstall or reinstall and keep getting the message QTCF_CFHTTPmessagesetheaderfieldvalue could not be located in the dynamic link library QTCF,dll. its driving me nuts can anyone help PLEASE
Many thanks.
Origionally i was receiving that some msi or nsi was missing and to insert my itunes disc which ive never had i tried to uninstall and kept on getting could not uninstall due to the folder not being found
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.
I installed iTunes, then quicktime. After I installed quicktime, I began seeing this pop up everytime I opened iTunes.
iTunes works, this just appears everytime I open it.
I completely uninstalled every apple software on my laptop, then reinstalled everything.
Nothing happened, still the same.
Windows 7
64BitHi,
I have exactly the same problem as the OP. To answer some questions:
I only have one copy of QTCF.dll.
It is in the correct place.
I have deleted it and repaired QT to replace it several times.
I have tried different versions of QT.
Win 7 Pro 64
I ran SysInternals MS Process Monitor to see what was going on. All programs which call this DLL were looking for it in their root directory, which suggested to me that the registry entry was either missing or corrupt, so...
I ran Regsvr32 on the dll and received the following Windows message:
"The module "qtcf.dll" was loaded but the entry-point DllUnregisterServer was not found. Make sure that the "qtcf.dll" is a valid dll or OCX file and then try again"
Now I'm out of ideas.
Cheers,
Tony -
Itunes 10.4.1 64bit for Win 7 can't find quicktime, QTCF.dll error -- HELP PLEASE!
Every time I install itunes 10.4.1 64bit for Win 7, it says it is unable to find quicktime, then instructs me to uninstall itunes then install it again. I've done this several times but still have the same problem. There is also another promt that says quicktime can't find the entry point and there's an error having to do with QTCF.dll ... what is this and how can I get my iTunes to work? Help please!
hi guys i found the solution from a wizard of the community and it works, so u may try as follows:-
Correct Answer by b noir on Aug 24, 2011 8:13 PM
Let's try a standalone QuickTime.msi update. It may not install correctly either, but fingers crossed at least the error messages we get from that install may better indicate the nature of the trouble with the QuickTime install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime.msi install.
Does it install properly for you? If so, does iTunes install properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Where can I download adobe photoshop elements 9
Where can I download adobe photoshop elements 9 ? I have purchased the program but I somehow misplaced the windows disc, I just have the Mac one. I have my product key, just need the program
shoOby.
Yes, you can download Adobe Photoshop Elements 9. The only thing that you need to do is go to this LINK http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-dir ect-download-links.html and download it. You need to follow the ADOBE download instructions.
First, you need to sign in with your Adobe ID. Second, go to the LINK I gave you and find Adobe Photoshop Elements 9 (PSE 9) Direct Download Links, them give a click to File 2 and download it (it takes time), them when it is done (downloaded) another click to File 1. After you finished downloading File 1, it will ask you to enter your Serial Number of the product. After you put the Serial Number of the your product, Adobe Elements 9 will be in your computer.
If for some reason you don't know or you don't remember the Serial Number of your product, go to your Account and Sign in with your Adobe ID, then go to "My products and Services" and it will tell you the Serial Number of the product.
You will find "My products and Services" on the top right side of the screen, where it say "Welcome xxxxx". Remember, to see "My products and Services" first you need to Sign in with your Adobe ID.
Maybe you are looking for
-
Ts-l663b cd/dvd "device cannot start,code 10" after uppgrade from vista to windows 7 home
Compaq CQ60-216DX Hi,I've upgraded from Vista to Windows 7 Home and now the CD drive is missing and displays an error code"10" DEVICE CANNOT START, under Device Manager. Looked for updated drivers on HP Support,there are none for CD drive. Cannot rol
-
Not able to edit Service Contract from WEBUI beacause of error
Hi, I am trying to edit Service Contract from WEB UI. But, when ever I say edit, it is giving error saying "Document is being distributed. Changes are not possible". Can you please let me know, why such error comes..and how to rectify that. Thanks, S
-
Scheduled DeskI report gets error SetPrompts failed (80004005).
Hello I have a DeskI report which I can refresh without any problem but when that report is scheduled I always get the error SetPrompts failed (80004005). The user that the report is scheduled by is the Administrator (who I can also refresh the repor
-
Can't Import Referenced Photos
I have a lot of older photos on an external drive I want to import. All are jpegs in files grouped by year, i.e. 2004, etc. I initially imported them but by accident pointed to my back up files on another drive. I deleted the Aperature folder, i.e
-
How do you enable plugins in safari settings on iphone 4s ?
How do you enable plugins in safari settings on iphone 4s ? Latest version Anable to find enable plugins box to tick in settings.Not in same location as previous version of softwear. Any answers?