Where is 'recording level' slider in new GB?

In GB 6.05 there was a slider to adjust the input's recording level.  I can't find it anywhere on the new version.   I know there's a track volume level but that does no good if what's recorded was clipping to begin with.

The recording level is in the Smart Controls for the track:
Show the Smart Controls pane and click the button.
You may need to enlarge the Smart Controls pane by dragging the upper border.

Similar Messages

  • I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

    I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

    If it's slow on startup it would be extensions loading or LaunchDaemons starting up. 
    You should have a look in:
    /Library/LaunchDaemons
    /Library/Extensions
    You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. 

  • Recording Level Sli

    I have the X-Fi Fatality sound card. For some reason, (and overnight), the recording level slider won't function any more. The message in the recording status window says "Follow Mixer Settings". I don't want that!? I want to be able to control the recording level from the player window as I always have. Does anyone know how to turn off the "Follow Mixer Settings" option? Thanks!

    Found the answer. For some reason, the "Sound & Audio Devices" in Control Panel didn't have the "Use Only Default Devices" checked. This was because I installed a Logitech HD WebCam, with its own microphone. That little check box somehow got unchecked. Not only did this fix the problem, but it also fixed "Smart Recorder", which was telling me that I didn't have an audio device. Everything's good now.

  • I can't raise my recording level when recording my guitar

    When I plug my guitar directly into my computer, GarageBand (line in) with guitar volume on max I get a weak recording signal (10% signal strength). It does record with decent playback but the signal is very weak with lots of headroom. When I adjust the "recording level" slider (even to max) I only gain another, maybe 10%, nowhere near the clipping red lights. Again, my guitar volume is set at max. Any ideas???

    Your guitar's signal just isn't strong enough, you either need to pre-amplify it somehow (e.g. by using a pre-amp or a mixing console) or get an audio interface that does the analog-to-digital conversion.

  • Focusrite/GBand 'Recording Level' problem.

    I recently bought a Focusrite iTrack Solo interface (using with a MacBook Pro) and having downloaded the latest versions of OSX (10.8.5.) and GBand '11, Version 6.0.5 (428.5), still find that I can't record to GBand.
    GBand recognises the iTrack in both Input and Output ... I can't adjust the 'Recording Level' slider.
    Following the instructions from a link provided in another answer on here (can't remember your name mate ... sorry!) I've gone into 'Audio Midi Setup' and ensured that the rate is set to 44100 (2ch-24bit Integer ?) but found that I was unable to adjust any of the Volume control sliders in the panel below.
    I'm pulling what's left of my hair out!!
    Any help would be greatly appreciated!
    Thanks in advance.

    alewales wrote:
    I can't adjust the 'Recording Level' slider.
    http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Recording level isn't adjustable ?????????

    Hello,
    It seems like many people have tried to answer this question but for me there is no luck of sorting out my problem.
    (I will be inserting pictures as I'm not very good at explaining)
    I got a Mustang I/II amp (by Fender) for Christmas (I sing on YouTube and need to get this sorted quick). I am using Garageband 09 on my macbook pro and have for many years (I have never had a problem till now). I have recorded one song with the USB port and it was great but the next time I tried the recording level was greyed out.
    I have tried changing the setting through Audio MIDI setup but it was greyed out. I'm not very good with laptops and computers but I need this sorted quickly due to my YouTube career.
    Please help
    Thank you

    The Recording Level slider is NOT a GarageBand setting. Think of it as a "remote" control that directly accesses the select audio device (through its driver).
    That means, if the selected audio device lets you change its input level through this software control, then the Record Level slider is active. This slider is "linked" to the other input slider on the Audio MIDI Setup app and the System Preferences Sound tab. If you have those windows open, then you'll see them moving at the same time. That's what I mean with linked, basically they are all the same control, controlling the audio device (if allowed).
    Hope that helps 
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/ 'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Where are all the recording levels in Audition?

    In Audition where would I go to set the sensitivity/clip settings, and the overall input level for the recording.
    I'm looking for all available recording level settings Audition has.
    Thanks.

    Audition han no reconding faders. You must use the windows mixer or level controls of your sound module.

  • Recording Level?

    New to Logic, coming from garageband and I have a quick, probably embarrassingly easy question, but in Garageband when recording from an external mic there's a slider that can set the recording level, to prevent clipping. Is there a way to do this when recording into Logic? Thanks.

    No. This would only be a problem if you are plugging a mic directly into the computer (you're not doing that, are you?)
    Any external audio interface you might use would have a level control. If you have not yet thought about getting an external interface, I suggest you search these forums for suggestions... there are many threads about this. I assume that you have upgraded to logic to have more control over your music than garage band will allow. As part of that process, a decent interface would seem mandatory (and a decent mic, of course... there are also many threads about this)
    And in any case, when you're setting the level, you need to do more than just avoid clipping. Assuming you are recording in 24bit mode (you are, aren't you?) it makes a lot of sense to set your levels so that they are peaking at least 6 - 10 db below max. This doesn't look as pretty on the meters, but by the time you put them through a number of plugins and send them all to busses and outputs, that extra headroom will really open up your recordings so they don't sound so digital and squashed. There are also many threads about this.
    Welcome to the big bad world!

  • Problems with Canon XA 10 XLR Recording level

    when I record using the XLR Channel 1 on my XA10, then import the video clip into video editing programs, the playback level is very low or not there at all when I play the DVD on my home intertainment system, using my Pioneer AV Receiver.  Is there another setting on the XA10 where the playback level can be adjusted?

    Volume sounds okay with headphones, but very low without headphones, even with the slider all the way up.  One thing which is likely a factor is that I had to turn on Mic Attenuation when using XLR recording, due to sound distortion in higher DB ranges.  A third factor is that the extremely low audio level is most pronounced when I play the video back using my Pioneer VSX-520 AV Tuner amp (using HDMI cable from DVD player to tuner).  The sound track from the XA10 XLR input is too low on all listening modes except "advance surround".  If I bypass the tuner, there is no problem, but I prefer not to have to do that, since all other DVD audio, such as movie DVDs, and CD tracks added to videos, have normal audio volume.

  • Record level lock on SAP ABAP table editing

    Hello All,
    I have a requirement wherein I need to give users ability to be able to update contents of a table. Currently, there are using maintenance view on the table for adding/editing contents of this table. However, this prevents other users from being able to enter the table and edit contents of other records within the table.
    Can anybody please guide me how do I go about giving record level edit lock on the table instead of entire table edit lock.
    Appreciate all responses.
    Thanks and Regards,
    Samta.

    Ok
    I  have had a request like yours, i.e the users could manage the same table in the same time.
    The standard behavior avoids it, because a lock of entire table is set.
    This was my solution:
    A) I've created a maintenance view for my table, and I set the attibute S (for subset) for all fields will be the key I want to lock.
    B) I've generated the maintenance table program for the view above.
    In this way if it try to manage the view by SM30, it'll be possible only to indicate the  values of the fields for the subset, so not all data of the table will be loaded, but only the records satisfying  the key.
    C) I've created a program to run SM30 for my view, using the fm VIEW_MAINTENANCE_CALL:
    .CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
           EXPORTING
                action      = 'S'  "Display mode
                view_name   = <table name>
           TABLES
                dba_sellist = tb_sellist
           EXCEPTIONS
                OTHERS      = 14.
    As you can see above, the SM30 is always called for DISPLAY only, in this way no standard lock is set
    D) I've use the event 19 in order to change the mode and set my lock:
    DATA: BEGIN OF MY_LOCK,
              MANDT       TYPE ZPPTA019-MANDT,
              WERKS       TYPE ZPPTA019-WERKS,
              /TRILOG/SE  TYPE ZPPTA019-/TRILOG/SE,
              COD_MOD_TAG TYPE ZPPTA019-COD_MOD_TAG,
            END OF MY_LOCK.
      DATA: W_SEL_LIST TYPE VIMSELLIST.
      DATA: VARKEY TYPE RSTABLE-VARKEY.
      FIELD-SYMBOLS: <MY_KEY> TYPE ANY.
      LOOP AT DBA_SELLIST INTO W_SEL_LIST
        WHERE VIEWFIELD = 'WERKS'
          OR  VIEWFIELD = '/TRILOG/SE'
          OR  VIEWFIELD = 'COD_MOD_TAG'.
        ASSIGN COMPONENT W_SEL_LIST-VIEWFIELD
           OF STRUCTURE MY_LOCK TO <MY_KEY>.
        IF SY-SUBRC = 0.
          MOVE W_SEL_LIST-VALUE TO <MY_KEY>.
        ENDIF.
      ENDLOOP.
      IF SY-SUBRC = 0.
        IF NOT MY_LOCK IS INITIAL.
          MY_LOCK-MANDT = SY-MANDT.
          VARKEY = MY_LOCK.
          CALL FUNCTION 'ENQUEUE_E_TABLEE'
            EXPORTING
              MODE_RSTABLE   = 'E'
              TABNAME        = 'ZPPTA019'
              VARKEY         = VARKEY
            EXCEPTIONS
              FOREIGN_LOCK   = 1
              SYSTEM_FAILURE = 2
              OTHERS         = 3.
          IF SY-SUBRC <> 0.
            MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ELSE.
            MAINT_MODE = VIEW_ACTION = 'U'.
          ENDIF.
        ENDIF.
      ENDIF.
      CLEAR OLD_019.
    I hope it can help you
    Max

  • Any option to restrict SE16 record level access based on company code?

    Hi All,
    I have a requirement to restrict record level access in SE16 based on company code.
    Our SAP system has two company codes. The requirement is that users of one company code should not be able to see records of other company code in SE16.
    Is it possible through some exits/badis/other methods?
    Thanks in advance.
    Regards,
    Arun Mohan

    You could write a small front end that accepts the company code, applies custom authorization code for each value and retains or removes, then calls the transaction and enters the selections the user requested and that your authorization check resulting in "passing"....  Of course, you'd have to block those users from "pure" SE16...   I once worked in situation similar, users in one country couldn't see USA data, etc. I think someone wrote an entire new program, called by ZSE16, for that.

  • Line In Recording Level Adjustment

    I am recording from a tape recorder to the hard drive. I have done this a lot over the years. Suddenly I am no longer able to adjust the line in recording level. I have always before gone to Control Panel/Hardware and Sound/Sound (recording tab), Click Line In, then click on Levels. When I adjust the level, either lower or higher, it does nothing to change the sound level. Can aynone please tell me why this feature isn't working any longer on my computer. Could some other setting have gotten changed? Where should I look? Thanks!!!!

    Have you tried to discuss it with mixer manufacturer?
    I mean they know own product very well and have best experiences with it.
    I presume they have tested it on different hardware platforms and different operating systems so I believe they are the right address where you can ask for help.
    In control panel you have standard options for sound but maybe you need something specific for connected mixer.

  • How to do the Record Level commit in DB Adapter

    Hi,
    I am using Oracle JDeveloper 11.1.1.6.0 and SOA server 11.1.1.6
    Problem Description_
    I am fetching multiple records using File Adapter in BPEL process, After Fetching I am writing those records in Database using Database Adpter.
    If any error records comes the database adpater rollback the complete transaction and none of the records is inserted into the Database.
    **Can anyone please tell me how to do the record level commit in Database Adapter so that All the success records can be inserted into the database except the Failure record*.*
    I dont want to call the Database adpater in loop multiple times to insert each record as it hampers the performance.
    Thanks in Advance
    Sunil

    I believe you are polling a file and inside the BPEL, inserting the records into the database using the database adapter.
    so according to your requirement you can do any one of the following things...
    1. Instead of using the database adapter for inserting the record, you can call a Stored Procedure which it takes the record fields as input and it inserts the record into the table and does a commit at the end. when you follow this approach, make sure your data source is defined as Non-XA, otherwise you will face some errors.
    2. If you are using the database adapter insert operation only, inside the BPEL, for the partnerlink of the database adapter, go to the properties and for the property "idempotent", give a value of false.
    by doing this, what happens means, after calling the database adapter from BPEL through the invoke activity, the transaction is committed and from the next activity i mean after the invoke, a new transaction will be started but it will use the same thread though
    3. If you are using the database adapter insert operation only, inside the BPEL, for the partnerlink of the database adapter, go to the properties and for the property "NonBlockingInvoke", give a value of true.
    by doing this, what happens means, the database adapter insert operation will happen in a separate transaction and it will be committed, inside the BPEL after the invoke activity, a new thread and transaction will be started
    4. Also, if you are using the database adapter insert operation, don't follow the steps as mentioned in either 2 or 3, you can simply put a dehydrate activity after the invoke activity.
    According to your requirement, all the four approaches works. But my personal feeling, don't go for 4, instead 1 is better, 2 or 3 is also good.
    Hope this helps,
    N

  • Record Level = Speaker Volume

    Currently my record level is equal to my speaker volume. When I mute the speakers, the record level is 0. No record level controls are visible. How can I fix this?

    Del Capslock wrote:
    -r in the shortcut target box made no difference. Still no record level controls
    In the Audio Mixer, the slider for speaker volume moves in tandem with the Audition slider. They cannot be controlled independently.
    It should be .exe -r (with a space). If you can't get record options at all, then something weird is going on, and we'd need to know more about your particular PC or laptop.

  • How to attach documents at record level using GOS?

    Hi Guys,
    I have been using GOS for some time now and i am using GOS to attach documents at transaction level.
    Now i need to design a utility where the user would first run a report and this report will bring a few records and the output should have an option to attach some PDF files for each record. Is this possible using GOS? Is there any other simple way to attach documents @ record level and not at transaction level? Any pointers??
    Cheers
    VJ

    two options:
    1. you want to upload document/view document from your report only.
    In this case
    a. go to transaction SBDSV1
    c. class name = "any name you desire without spaces"
       class type = "other objects"
       all other parameters copy from any other objects.
    once this is done, in your program call fm
    call function 'SWU_OBJECT_PUBLISH'
        exporting
          objtype           = 'class name created in stepc'
          objkey            = 'concatenated devlierynumber item number variable'
        exceptions
          objtype_not_found = 1
          others            = 2.
    this will bring up the icon for uploading document in the top left corner of your report. (call it after start of selection)
    to manually test this process , go to transaction OAOR and use class name, type =OT and the key to view or upload the file.
    2. you want to upload/view document from shipment document transaction.
    in this case, you need to find the appropriate BO from SWo1 transaction  which has go delivery number /item number as the key (for example look at BO LIPS from SWO1)
    once this is done you can call the FM mentioned in the previous option by passing the classname and the delivery doc key. the upload/view can alos be done from the standard transaction for that document.
    Hope this is clear.
    Regards
    Raja

Maybe you are looking for