Where is Rescue and Recovery 4.50 for Windows 7 and why was it removed from the support site?
When Rescue and Recovery 4.51 was released a few weeks ago, all references to the previous version were replaced. Unfortunately, the new release is not supported on the R series machines nor on the earlier T series machines, so for those machines, the only version of Rescue and Recovery for Windows 7 that is available is version 4.30.0027 which was released in September 2009.
This makes no sense.
Please re-instate the documentation and download links for Rescue and Recovery 4.50 for all machines which were supported on that release but are not on version 4.51.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's
Thank you for your response.
The R61 and the R500 that I own, that are currently running Windows XP are staying there until Microsoft stops supporting Windows XP, at which point I will decide what to do with them, so trying 4.51 on them is not currently an option.
As an IT professional, I tend to be the support guy for all the Lenovo computers in my family. My son also has an R500, which was purchased used, and it came with Windows 7. When I set it up for him, I installed Rescue and Recovery 4.5 over 4.3 before taking the original full system image backups. He would loose the capability to use those backups if I were to try to downgrade that machine to Rescue and recovery 4.3. My own R500 came with Rescue and Recovery 4.30.0025, (for which there is no documentation nor download links available, to my knowledge), and I have never upgraded it, because I am concerned that all my backups would become unreadable if I did. I don’t think it is worth the effort to make all the external bootable backups that upgrading the software would require. I would upgrade if I was assured that version 4.30.0027 could read the backups taken by version 4.30.0025.
There were 2 more versions of Rescue and Recovery. There was version 4.31.007 released on 2010/09/28 and version 4.31.011 released on 2011/03/04. The document ID’s for release 4.51 are the same as those for the 4.31 releases, so I should assume that Lenovo considers the 4.31 releases a major advance over the 4.30 release, and thus not a valid fallback option but why not?
The download links for Rescue and Recovery 4.31.007 are:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvtvrnr431_007en.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvtvrnr431_007en.exe
The download links for Rescue and Recovery 4.31.011 are:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvtvrnr431_011en.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvtvrnr431_011en.txt
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's
Similar Messages
-
Rescue and Recovery 4.3 for Windows 7, installation
Hello,
I purchased my system June 16, 2009 with Vista downgraded to XP Pro so I was not able to purchase a upgrade disk from Lenovo.
This week I purchased the Windows 7 64 bit Home Premium upgrade package at a local store.
I did the upgrade (clean install) Windows 7 64 bit Home Premium on my ThinkPad T400 type 2764-CTO. Also successfully installed all Win 7 64 bit ThinkVantage software with System Update 4.
I downloaded Rescue and Recovery 4.3 for Windows 7
The documentation for the installation of R&R 4.3 is difficult to comprehend and I could not find a post on this board that deals with my topic.
The recommended procedure before installing Rescue and Recovery on computers running the 64-bit version of Microsoft Windows 7 is:
you must download and install the Microsoft Visual C++ Redistributable Package (x64) SP1.
That was done with no problems!
To make the Rescue and Recovery program work with Sysprepbackup in the Windows 7 operating system, you must download and install the Sysprepbackup accessory package.
The Sysprepbackup operation changes in the Windows 7 operating system because a new version of Windows Recovery Environment (Windows RE) is built in the Windows 7 operating system. When you run the System Preparation Tool (Sysprep) and use the /generalize option, the Sysprep operation disables Windows RE by removing the Boot Configuration Data (BCD) entry to the Rescue and Recovery Pre Desktop Area (PDA). To make the Rescue and Recovery program work with Sysprepbackup in the Windows 7 operating system, you must download and install the Sysprepbackup accessory package.
and here starts my problem installing the package!
Instruction:
To install the accessory package in the Windows 7 operating system and take a Sysprepbackup on a USB hard disk drive, do the following:
Type the following commands to start the Sysprepbackup process using administrative privileges: cd "\Program Files\Lenovo\Rescue and Recovery" rrcmd sysprepbackup location=U name="sysprep backup" The "...run sysprep now..." message displays. Note: Before you take a Sysprep backup on the USB hard disk drive, make sure that there is at least one backup on your local hard disk drive.
Go to the C:\Windows\Systme32\Sysprep directory and launch the sysprep.exe file. The System Preparation Tool window opens.
Be sure to select Quit from the Shutdown Options drop-down list box. Click OK to save the setting. The Sysprep process begins.
When the Sysprep process is completed, run the msi file that you downloaded using administrative privileges. Wait until the package is successfully installed.
Restart your system. Then, it will automatically boot to the PDA to continue with the Sysprepbackup process on the USB hard disk drive. For the detailed parameters about the restore operation commands using RRCMD, refer to the Rescue and Recovery 4.3 Deployment Guide. Software versions to use with this release.
3.At the end Install the Rescue and Recovery 4.3 package.
Ok that should be simple to do.
What is "Sysprepbackup" and do I need to follow the installation procedure above to be able to install and run Rescue and Recovery 4.3 for Windows 7. I dont think I need to or want to do a "Sysprepbackup on a USB hard disk drive". or may be I will when I understand what it is.
Can I simply install the Microsoft Visual C++ Redistributable Package (x64) SP1 and the the Rescue and Recovery 4.3 package.
Thank you
Solved!
Go to Solution.I installed Win 7 Pro 64 on my T400, ran TVSU and installed R&R 4.3. Fortunately, I didn't read those instructions first, or I might not have done it
Have you tried just installing R&R? If it needs anything else, it should ask for it during the install. IIRC, it does require the VCC+ package.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?
Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.
-
Rescue and Recovery 4.3 for Windows 7 Problem on T60p
Rescue and Recovery 4.3 advanced mode doesn't communicate with my USB devices. I want to rescue a number of files located on my USB backup, but the R&R never communicates with it. No problem viewing it with Explorer.
Solved!
Go to Solution.My Mistake! I incorrectly assumed that the Rescue & Recovery update would allow me to restore individual files. I neglected to read the install information text included with the download. R&R does work, but doesn't permit access to any prior files. Too bad.
-
i cant get itunes to install also get error after 1 use that itunes does not work again
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2 -
I was cut off from the support chat and can't get back on re: re-installing PS after uninstalling
I'm using a MacBook Pro (Retina, 15-inch, Mid 2014) and CS 6 from a dvd
Keyboard shortcuts suddenly disappeared and I was unable to reset them.
I held down cmd-opt-shift and started Photoshop. Saw "Delete Photoshop Settings file", released the keys, clicked Yes, and let Photoshop finish loading. Rebooted computer. Still nothing.
I uninstalled PS, tried to to install from dvd and gave me "The serial number you entered is invalid."
Contacted Adobe support chat and Naveen gave me a download link. Still gave me: "The serial number you entered is invalid."
Then firefox crashed. Tried to get back on chat and could not and now my only "recommended option" is Forums. So here I am. Don't think that there's much anyone can do to help as I have uninstalled PS, but hoping to hear from Adobe support...Got back onto chat but have to contact tech support during their PST hours
to deal with keyboard shortcuts problem.
On Mon, Mar 9, 2015 at 6:40 PM, Kartikay_Sharma <[email protected]> -
Cannot open Microsoft Word .doc files from any website (.docx are ok)
That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ " -
I can't sync my photos from my computer to my iTouch. I am trying to sync it from windows. On step 3 it says to click the photo tab on itunes, but there is no photo tab. Can somebody please help?
-
How to install Rescue and Recovery 4.21 on Windows 2003
There should be a good amount of users running Windows 2003 on their thinkpad for various reasons. As much as I tried, I could not get Rescue and Recovery's MSI to install on my X61 running Win2003 R2 SP2, despite attempts to modify the Setup.ini file.
the changes made in setup.ini:
[Win2003Server]
MajorVer=5
MinorVer=2
MinorVerMax=3
BuildNo=3790
PlatformId=2
The returned installer error is "The current operating system is not supported for running Rescue and Recovery. Supported operating systems includes Microsoft Windows 2000 with Service Pack 3 or Windows XP with Service Pack 1 or later".
This is such a shame as I'm pretty sure RR would run just fine on win2003 as both WinXP and win2003 are based on the same underlying technologies and code. Please advice if there's any method such as a command switch for MSI installer to suppress OS detection error or any modification that can be made to setup.ini to get it to install on win2003 or any utility that can be used to modify MSI files and database? Thanks!
Message Edited by Xseriesfanboy on 08-31-2008 08:26 PM
Message Edited by Xseriesfanboy on 08-31-2008 08:30 PM
Solved!
Go to Solution.Alrighty..I've manage to google a hack to this problem of getting Rescue and Recovery to install on Windows 2003. So let this post be a guide to how to get this done:
Getting the tools to modify Rescue and Recovery MSI (Windows Installer)
Download and install Orca MSI editor from http://astebner.sts.winisp.net/Tools/Orca.zip
Review http://ravi1337.blogspot.com/2007/05/orca-msi-editor-make-any-software.html, this guide should give you a good idea what you'll be doing with this tool.
Download Rescue and Recovery™ 4.21 from Lenovo
Download Rescue and Recovery™ 4.21 for Windows XP (32-bit) or Windows 2000 from http://www-307.ibm.com/pc/support/site.wss/license.do?filename=thinkvantage_en/z652_setup_rnr42_016c...
Ensure you are downloading full install with all language pack to avoid any missing installation file due to regional settings
Run the installer and see that all files are extracted accordingly.
Modification of Rescue and Recovery Installer
Delete all files in C:\Documents and Settings\(User Account Name)\Local Settings\Temp\ this will prevent confusion on which files are unpacked and created by RR installer
Extract z652_setup_rnr42_016c.exe into a folder named z652_setup_rnr42_016c.
Execute tvtrnr42.exe
The MSI installer is then unpacked to the following default directory: C:\Documents and Settings\(User Account Name)\Local Settings\Temp\. Note that the installer creates two directories for installation of RR, that are {F151F2B3-0C32-44D3-90E2-E639B8024622} and _isXXXX <--- 4 randomly generated digits
The folder _isXXXX contain Rescue and Recovery.msi
On the first run of the installer, the following error will be shown "The current operating system is not supported for running Rescue and Recovery. Supported operating systems includes Microsoft Windows 2000 with Service Pack 3 or Windows XP with Service Pack 1 or later". DO NOT CLICK OK! This is cause the installer to purge all installation files and related directories in the temp directory. Just leave the error window as it is without clicking the OK button!
Copy all TVT files from folder z652_setup_rnr42_016c into both directories
Modify setup.ini entry for Win2003Server with notepad and save changes:
[Win2003Server]
MajorVer=5
MinorVer=2
MinorVerMax=3
BuildNo=3790
PlatformId=2
Right-click on Rescue and Recovery.msi and edit with Orca
Go to LaunchCondition Table
Drop the following rows and save changes:
(((VersionNT=501 AND ServicePackLevel>=1)OR (VersionNT=500 AND ServicePackLevel>=3)) AND WINSERVER=0) OR Installed- The current operating system is not supported for running [ProductName]. Supported operating systems include Microsoft(R) Windows(R) 2000 with Service Pack 3 or later and Windows XP with Service Pack 1 or later.
IEEXISTS=1 OR Installed - [ProductName] requires Microsoft(R) Internet Explorer version 5.5 or higher. You cannot install the Rescue and Recovery program without this version of Internet Explorer.
INCOMPAPPNAME=0 OR Installed - [INCOMPAPPNAME] is installed and is incompatible with this version of [ProductName]. This application cannot be installed. To install [ProductName], uninstall [INCOMPAPPNAME] and then restart this setup.
Not SGEWRONGVERSION OR Installed - [INCOMPAPPNAME] is installed and is incompatible with this version of [ProductName]. This application cannot be installed. To install [ProductName], uninstall [INCOMPAPPNAME] and then restart this setup.
When you're done with these modification, re-run Rescue and Recovery.msi without closing the previous error window. Rescue and Recovery should now install without any glitch! Good Luck!
Message Edited by Xseriesfanboy on 09-01-2008 06:37 AM
Message Edited by Xseriesfanboy on 09-01-2008 06:38 AM -
Error installing rescue and recovery 4.3 on windows 7
i have a sl410 with windows 7 ultimate(32bit) installed, but i failed to install rescue and recovery 4.3 for many times,reporting"Error 25014. There was an error installing the Rescue and Recovery boot manager. Return code: 6".
why?
i found someone said about using a command line installation which will NOT install the RnR partition,but how to use command line installation?i've got only the tvtvrnr43_1027sc.exe downloaded file and the tvtrnr43_1027.exe in C:\SWTOOLS\apps\rnr43sc\ directory,how can i input the comands like setup.exe /a /s?which command should i use?http://forum.lenovo.com/t5/ThinkVantage-Technologies/Rescue-and-Recovery-4-3-for-Windows-7-installat...
-
Can I have a Single Licence for Windows and Mac?
I have PS CS4 for Windows installed on my desktop computer. I have recently bought a MacBook Pro. Can I install PS on my new laptop using my Windows licence or must I buy another licence.
If you have a windows clone software installed, then it should be fine. But if you want the mac version of photoshop, then normally you would buy the CS4 photoshop for Mac as the CD version comes with only 1 license for 1 platform.
However, since CS4 is not the current version you could subscribe to the cloud and that license is for Windows and Mac. -
In earlier versions of Firefox, I could set options such that when a download completed successfully, the download entry was automatically removed from the download windows. I don't seem to be able to get this functionality in ver 13.0.1. In this version, i have to right click on each completed download entry, and choose "remove from List". This is very cumbersome.
I really liked the earlier auto cleanup as it left only pending, current and failed downloads in the Download window - just the stuff I needed to pay attention to. Is there any way to set up ver 13.0.1 to make things work the way they worked so well earlier.
A related issue may be that in the Privacy tab, the option for Browsing and Download history have been combined (were they separate earlier? - don't remember). I want to keep my browsing history but not my download history. I can still clear them individualy in the "Clear Recent History" settings, so why can't I set the control for keeping either individually? Or can I?The download history is part of the regular browsing history, so you would have to disable the history altogether as you've already noticed.
* Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
**"Remember my browsing and download history"
Firefox manages the downloads in the Downloads folder in the Library.
* Firefox > History > Show All History > Downloads
Future Firefox versions won't use the current download manager (pref: browser.download.useToolkitUI; Bug 726444), but use a toolbar button with a drop down list, similar to the Bookmarks Menu button. -
Rescue and Recovery has encountered a problem and needs to close
I'm running R&R 3.10.0022 on a ThinkPad T42p 2373-HTU and encountered the Rescue and Recovery has encountered a problem and needs to close error. When I tried to install the advertised patch with rnr31cp5.exe, I get an InstallShield Wizard dialog box that says "Could not find any previously installed compliant products on the machine for installing this product" and the install fails.
I then tried to reinstall the Microsoft patch that seemed to have caused the original problem, KB917422, which told me that a more recently installed service pack made this patch (KB917422) unnecessary.
Bottom line: I can't run R&R. And I couldn't find a Lenovo R&R update for my machine. Any ideas please?
Al Vesper
Solved!
Go to Solution.Hello mate,
Try to uninstall completely R&R and install the latest version.
You can find it there : http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-76226
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw -
Rescue and Recovery 4.3 on Windows 7 64 bit won't install
Hi,
I had to reinstall my Windows 7 and when I did that I accidentally wiped away the Recovery partition. I didn't think this would be a problem but now I am trying to install Rescue and Recovery 4.3 on Windows 7 64 bit and I keep getting this error
"Error 25014. There was an error installing the Rescue and Recovery boot manager. Return code: 6"
I am wondering why I am getting this error and how I can install Rescue and Recovery 4.3?Hi,
can you also specify, how did you installed Win7?
Using Recovery CDs? or?
Note, that RnR needs to modify the boot loder of Windows and if the access is blocked, due to permissions, then this situation of course will happen.
However, there is also a second option, on how to get RnR installed and this is using a command line installation which will NOT install the RnR partition.
NOTE: the change in the boot loder is needed only for the creation of this RnR partition.
For more info, please read the following RnR manual:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/rnr43dg.pdf
Feel free to ask any other question.
Cheers -
How do I create 2 Recovery partitions: one for Lion and one for Mountain Lion?
Well that is basically the question:
How do I create 2 recovery partitions: one for Lion and one for Mountain Lion?
Reason is that I would like to keep the option to return to Lion, or even better, have a seperate partition for eacht?can I access my programs from the other partition, so I can save space ...
No, as far as I know, each one is completely separate - especially if you're dealing with two different versions of OS's.
is it possible to safely make an extra partion on a running drive (it is my main computer ...) The disk is large enough ...
how large would this have to be
I've personally never done it on a running drive - have read it's possible, but don't want to suggest it since I've never done it and wouldn't be sure about the steps. This is how I got to two partitions on my iMac:
Originally, I had just one partition with Snow Leopard. I used CCC to clone that to an external drive. Booted into that drive and used DU to partition and erase the internal. I then cloned the new clone back. Also cloned the same thing to the other partition which I then upgraded to Lion. So I had two OS's - SL and Lion. I've now decided to clone my SL to an external drive for occasional use and installed ML on that partition - so now I have Lion and ML.
There are two ways to get a "fresh" install: either download the OS again and install it on a partition of your choice or, as I've done as well, copy the installer to a safe place so you don't need to download it again. It does include whatever apps/software is included in the OS. I've designated two smaller partitions on externals as my "fresh" installs of both Lion and ML for emergency or reinstall purposes (this is my way of dealing with not having install DVDs) - I took the time to install it there and then slowly add fresh installs of my important apps (either via download or install CD) - don't bother with the little/less used stuff, a current copy of that can be downloaded if and when I need it. I don't really update those two - that can also be done if/when I need it since that'll always change.
So, yesterday, I decided I wanted to start fresh with ML - booted into my fresh install of Lion (on external), wiped the SL partition on my internal and installed Lion. Decided to download a fresh copy of the ML installer and installed that. Then ran Software Update. After that, repaired permissions. Then I methodically opened every third party app and checked for updates - installed those where necessary. After all that, I simply copied (drag 'n drop) my entire Documents folder (which contains all my important data,, photos, etc) over from another backup.
This took a while, but mostly because of the long download times; the installs weren't all that bad. I should be running a really clean system now, especially since nothing was ported over except my Documents folder.
Maybe you are looking for
-
i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi <Em
-
I am using TCS4 (FM11, RH10). In FM, I add images (import by reference), set the anchored frame to "Run into paragraph" and have it right-justified. Looks good, and publishes to PDF fine. RH imports it and ignores the anchored frame spacing. If the
-
2 week wait for serial number to CS6 (education) help please?
Hi, I need help with this! I really dont know what to do next! i bought a copy of CS6 (education) over two weeks ago, when it (disc) arrived next day I logged in, created an account and emailed off relevant proofs and numbers. Nothing, three days
-
Under 'Name' field, the name appears as the artist - name
It seems to happen after i go to add folder to add new songs. It just started happening recently. I could reinstall it but i dont want to loose all the rankings and times Ive played songs because thats how i have some of my playlists set up. So after
-
Laptop freezes completely after about 10 mins
I have a satellite p305-S8837 & after you turn it on it completely freezes after about 10 mins no matter what I am doing whether I am on the internet or Itunes or Microsoft Word. Because of this I can't even do a proper shut down. I have to hold down