Where is security configuration for deployed web application stored

Hi,
We have deployed a folder as a web application. The changes I am making in Deployments -> web application -> Security -> URL Pattern -> Roles -> Edit a Stand-Alone Web Application URL Pattern Scoped Role is not saved and it is getting lost when I restart the application.
For example I have added "AppTesters" group in "valid-users" url-pattern.
Can anybody help me where these settings are stored and why it is not getting saved across application restarts.
Thanks,
Sambath.

How are you restarting your weblogic Admin Server?
This is only possible if some how while your Admin Server is restarted, the ldap directory that is present int the %DOMAIN_HOME%/your_domain/servers/AdminServer/data directory is deleted or updated with the previous values.
This may give you some idea how to proceed with this issue.
Thanks,
Sandeep

Similar Messages

WEB Server And Database Space requirements for deploying Web Application

Hi,
We are in requirement of WEB Server And Database Space requirements for deploying our Web Application in cloud server. We want to know technical requirements and feasibilities laid by Microsoft team for deploying web
application.......
Regards,
Sreenivasa M S

Hi,
Please refer this link and check if it helps:
http://blogs.technet.com/b/cbernier/archive/2013/09/24/deploy-your-web-application-to-windows-azure-from-with-visual-studio.aspx
Regards,
Azam Khan

How to change port for deployed web application on IAS10g(from 7778 to 80)

I have deployed an application on IAS Application Server. The default link to my application is:
http:/my_sever_ip_address:7778/my_app
Can any one tell me how to change the port that my_app run on from 7778 to 80.
So that the link to my_app will be:
http:/my_sever_ip_address/my_app (run on default port 80)
Very urgent!
Thx

You need to read the Oracle® Application Server 10g Administrator's Guide of your installation, which is also available online. In particular, for 9.0.4, you need to read the chapter Managing ports. Basically you need to change your web-cache listener port if web-cache is installed; otherwise you need to change Oracle HTTP Server Port.
Also note tht port 80 requires extra steps since it is a restricted port.

Configure Log File for each web application deployed in weblogic server usi

Hi All,
How do I configure Log4J to log separately for each web application? i.e. Assuming, I have a web application "AWeb" and a web application "BWeb". I need a log file to be created for AWeb Separately and BWeb Separately. i.e. All the log information for "AWeb" web application will be stored in AWeb.log and all the "BWeb" web application will be stored in BWeb.log
Do you have any sample code and configuration details for the above-mentioned requirement?
Thanks in Advance,
C R Baradwaj

You do not need to do anything strange, just use log4j the usual way with the exception that you do not need to init log4j (this is not necesary when using a log4j.xml.)
A minimal sample of a log4j.xml is
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
<appender name="ConsoleAppender" class="org.apache.log4j.ConsoleAppender">
<layout class="org.apache.log4j.SimpleLayout"/>
</appender>
<root>
<priority value ="debug" />
<appender-ref ref="ConsoleAppender"/>
</root>
</log4j:configuration>
You just have to be sure that you have different log4j.xml in your classpath for different web applications.
Regards,
LG

Configuring the authentication scheme for a web application

Hi all,
We have a requirement to configure the authentication scheme for a web application where some set of users should access the application using basic LDAP (userid/password) authentication and some using digital certificate authentication.
Since the deployment descriptor (web.xml) allows only one directive for auth-method in logic-config, we want to know if there is any other way to achieve this requirement. We are thinking of a custom login module approach. But we are not able to figure out how to configure the auth-method at runtime from the login servlet.
Please let us know if there is any other approach to achieve this.
I will be thankful if any body shares any specific solution to this issue.

This forum is probably not the correct one to ask in. It's more related to the web container than Java Programming.
Kaj

How to create separate log files for each deployed web application in oc4j

Hi All,
I am using Windows2000, Oracle9iAS(OC4J). Say I have deployed 3 web applications onto this oc4j server. Then how to create 3 different log files so that I can see the log messages(System.out.println's) of each of these web appliations in a different log file.
Thanks and Regards,
Ravi.

Where do the messages printed via ServletContext.log() go? Is this configurable separately by web application? If so, you could at least replace your System.out.println() with sc.log() statements. For exceptions, you could trap them and log them since the log() method takes a throwable as well as a String.
John H.

Deploy web application in jbuilder 9 with weblogic 7 problem

when i create a web application and a servlet, and deploy it in jbuilder 9 with weblogic 7.0 ,jbuilder 9 showed me the error,please tell me why, when i choose "redeploy" ,it can be normally work..
E:\bea\jdk131_02\bin\javaw -classpath E:\bea\weblogic700\server\lib\weblogic.jar;E:\bea\weblogic700\server\lib\webservices.jar;E:\bea\weblogic700\server\lib\weblogic_sp.jar; weblogic.Deployer -user system -adminurl http://localhost:7001 -password 12345678 -deploy -name firstWebApp -upload -source E:/J2EE/servlet/firstWebApp.war -targets myserver
WebLogic Application Deployment Utility
Usage: java weblogic.Deployer [options] [-activate|-deactivate|-remove|-unprepare|-cancel|-list] [files]
where options include:
-help Print this help message.
-version Print version information.
-adminurl <https://<server>:<port>> The URL of the administration server: default
http://localhost:7001
-user <user> A user other than the default of
"installadministrator"
-password <password> Specifies the password on the command line.
If this option is absent the user is
prompted.
-verbose Displays additional status during the
deployment process, including notifications
when the application is prepared and
activated on each target.
-debug Displays debug level messages to the standard
output.
-examples Display example usage of this tool.
-upload Causes the specified source file(s) to be
transferred to the adminstration server. This
is used when the Deployer tools is not being
used on the same machine as the adminstration
server and the user does not otherwise have
access to place the targeted files on the
adminstration server.
-delete_files Causes the server to remove the files that
are specified in the file list and leave the
application activated. This option is valid
only for unarchived web applications.
-remote Signals that the tools is not runnning on the
same machine as the adminstration server and
that the source path should be made passed
through unchanged as it represents the path
on the remote server.
-nostage Sets the stagingMethod attribute on the
application mbean when it is created so that
the application will not be staged and the
original source is be used.
-external_stage Sets the stagingMethod attribute on the
application mbean when it is created so that
the application will not be staged but the
value of the staging path will be used when
preparing the application.
-stage Sets the stagingMethod staging attribute on
the application when it is created so that
the application will always be staged. This
value will override the stagingMethod
attribute on any targeted servers.
-nowait Once the action is initiated the tool will
print the task id and exit. This is used to
initiate multiple tasks and then monitor them
later using the -list action.
-timeout <seconds> The maximum time in seconds to wait for the
completion of the deployment task. When the
time expires the current status is printed
and the program exits.
-source <archive file or directory> Location of the file or directory that
represents the enterprise component or
application tha is being (re)activated. If
the source file is relative it is relative to
the current directory, unless the -remote
option is used. To specify individual files
within an application for reployment or
addition list them at the end of the command
line.
-name <application name> The name of the application being deployed.
-targets <<server 1>,...<component>@<server N>> A comma separated list of the server and/or
cluster names. Each target may be qualified
with a J2EE component name. This enables
different components of the archive to
deployed on different servers.
-id <task identifier> Optional client supplied unique identifier
for the deployment task. The id is first
specified to -activate, -deactivate,
-unprepare or -remove. It is then used later
as an argument to -cancel or -list.
-activate (Re)activates the <source> application on the
<targets> with the <name>.
-deactivate Deactivates the application <name> on the
<targets> leaving an staged application files
in a state where the may be quickly
reactivated.
-unprepare Deactivates and unloads classes for the
application <name> on the <targets> leaving
an staged application files in a state where
the may be quickly reloaded.
-remove Deactivates the application <name> on the
<target> and removes any files that were
staged for this application. If there are no
longer any targets for the application, the
associated configuration is completely
removed.
-cancel Atempts to cancel the task <id> if it is has
not yet completed.
-list Lists the target status of each task <id>
-deploy a convenient alias for activate.
-undeploy a convenient alias for unprepare.
Optionally a list of the specific files in the archive that are to be
redeployed may be specified. If a directory is specified the entire subtree is
redeployed.
Full documentation on this tool is available at:
http://edocs.beasys.com/wls/docs70/adminguide/utils.html#1138475
No actions was specified. Please specify one and only one of:
-activate, -deactivate, -cancel, -remove, -unprepare, or -list.
Type java weblogic.Deployer -examples for example usage.

you use "deploy" under DOS-Mode to deploy your web application?
i found some differences between "deploy" and "redeploy" function in jbuilder 9.
when i choose "deploy" ,jbuilder shows me the commond below:
E:\bea\jdk131_02\bin\javaw -classpath E:\bea\weblogic700\server\lib\weblogic.jar;E:\bea\weblogic700\server\lib\webservices.jar;E:\bea\weblogic700\server\lib\weblogic_sp.jar; weblogic.Deployer -user system -adminurl http://localhost:7001 -password 12345678 -deploy -name firstWebApp -upload -source E:/J2EE/servlet/firstWebApp.war -targets myserver
WebLogic Application Deployment Utility
when i choose redeploy,it shows me: (the -deploy parameter has changed to -activate) ,maybe it's a bug.
E:\bea\jdk131_02\bin\javaw -classpath E:\bea\weblogic700\server\lib\weblogic.jar;E:\bea\weblogic700\server\lib\webservices.jar;E:\bea\weblogic700\server\lib\weblogic_sp.jar; weblogic.Deployer -user system -adminurl http://localhost:7001 -password 12345678 -activate -name firstWebApp -upload -source E:/J2EE/servlet/firstWebApp.war -targets myserver
WebLogic Application Deployment Utility

SharePoint 2013 Central Admin says port 80 for three web applications, but IIS says they have different ports

Hello,
I have three web applications on a SharePoint 2013 servers. In Central Administrators on the Application Management page where it lists all of the web applications, it shows Port 80 being used 2 3 sites. When I go to IIS, 2 of the 3 are using
different ports, 81 and 82. So, only one site IIS says is using port 80. Why is this? The host file has no entries in it. Where these web applications extended?
Thanks,
Paul
Paul

Hi Paul,
From the URL of the web application in Central Administration in the image, you have configured the Alternate Access Mapping for the web applications.
And the URL configured is by default using port 80 if you don’t
assign other ports for the web application, so the port is changed to 80 in Central Administration.
To be able to access the web application, you need to add binging for the web application in IIS(please make sure that you have added the host name in DNS).
For example, SharePoint – 32298, you need to create the binding for the web application in IIS as the image below:
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How to deploy web applications on d:\web

Hi all,
I am new to this forum and like to know the procedure for deploying a web application
other the default deployment directory. (Eg. I need to deloy a web application
in D:\web directory).

Yes. The new Weblogic J2EE book requires installation in 'c:\wlserver6.0' for the
examples to work, so that is
where I put it.
Cheers
"Mohan" <[email protected]> wrote:
>
R u sure? I think u r refering to the default installation directory
which is
c:\bea.
"Donald Stadler" <[email protected]> wrote:
The installation program gives an option to change the default deployment
directory.
I used it myself on intallation.
"S.Mohan" <[email protected]> wrote:
Hi all,
I am new to this forum and like to know the procedure for deployinga
web application
other the default deployment directory. (Eg. I need to deloy a web
application
in D:\web directory).

Urgent:Please Help. Need to deploy web application with servlet:(

Tomcat 4.0 is already installed.
Trying to deploy a web application and invoke a servlet through it.
Here is the command I am using for deploying the application:
http://localhost:8080/manager/install?path=/NewApplication&war=file:d:\Tomcat4\webapps\NewApplication
The application get deployed. However, I have a problem. As soon I stop and restart the server, this application is gone.
1. Please someone help: How should I make it permanent so that the application stays even if I restart the server.
2. I am not able to access the servlets placed in the /WEB-INF/classes/ sub-directory under NewApplication directory.
If you need I can cut and paste the web.xml file which will show the deployment descriptor.
Please help: How do I make this work. I need it urgent.
Any help will be appreciated.
Thanks,
Indrasish.

The simplest solution would be to put the war file inside the webapps directory and restart the server. You should be able to access the app using the http://servername/app

Failed to deploy web application with same name twice

Hello-
On Oracle 10g Application server I deployed an WAR file called "anbadmin", then undeployed it. The undepoloyment failed from the OEM so I undeployed it manually via removing its entries from server.xml.
When I tried to deploy it again with the same name I got this:
Failed to deploy web application "anbadmin". Failed to deploy web application "anbadmin". . The evaluate phase failed. The Adapter used in the evaluate may have thrown an exception.
Resolution:
Please call Oracle support.
Base Exception:
java.lang.NoSuchMethodError
null. java.lang.NoSuchMethodError
Is there a solution for this?
Regards

I think I know the solution. We encountered exactly same message and no further deployment could be made. It appeared message in "dcmctl" utility was much more helpfull than the one in EM (though you still have to use "getError" command...)
If you are using file-based repository, you have to issue command in dcmctl utility "resetFileTransaction". This closes repository and opens it again.
Myrra

Enable the security configuration for this panel

Why do my panels built with Configurator sometimes display
this in Ps Cs4?
"Please close all panels or restart Photoshop to enable the
security configuration for this panel"
Closing panels or restarting Photoshop does not enable the
panels but exporting from Configurator does enable them. Why do I
have to keep exporting?

I believe I have stumbled on the answer to this problem, so I
would like to pass it along to any other users who have a similar
problem.
My experience is that this is an intermittent problem, so I
asked myself what do I do from time to time that could be causing
this difficulty. The answer is I use a program called CC cleaner to
clean out temporary files (that in theory I don't need). I found
that after running CC cleaner, I have to re-export the
configuration file (as I get the error message described in an
earlier posting) so that the configurator panel subsequently opens
properly when I open up C S 4.
I immediately ran CC cleaner again and found that it wanted
to delete only one group of files that were located in the
following folder:
C:\Documents and settings\user's name\application
data\Macromedia\flash player\*.*
Accordingly, I instructed " CC cleaner", to exclude this
folder and everything in it (from deletion):
Now if I run CC cleaner to get rid of all my temporary
Internet files and other temporary files, but it leaves the above
folder untouched, and so far the configurator panel opens up
properly in Photoshop.
I don't use Windows "disk cleaner" so I'm not sure whether or
not this cleaner represents a potential problem. In any event it's
the Macromedia folder described above that causes the problem.
It's clear that Adobe configurator uses Macromedia flash to
do its thing, so hopefully I've solve this problem
long-term.

Unexpected error when configure a new web application

hello,
I'm trying to create a new web application ( under Deployments in console). I
just manually create an sub-dir under ".\config\<active-domain>\applications"
directory, say WebAppDir. Then I went to the console and right-click on the "Web
Applications" and select "Configure a new Web Application", then I filled out
the Name, URI, and Path as follows:
Name: WebAppDir URI: WebAppDir Path: .\config\<active-domain>\applications
then click "Create" , I then got the following error message, I don't know why
and what i did wrong... please let me know what did i do wrong ? I don't have
any things under the new dir i created, but I thought i would be fine, but it
didn't.
Here is the error message:
An unexpected error was encountered in processing your request.
Exception java.lang.NullPointerException at weblogic.management.console.pages._panels._mbean._webappcomponent._jspService(_webappcomponent.java:212)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:208)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1127)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1529)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Current Date Wed Jun 06 17:01:25 CDT 2001
thanks so much...i really appreciate your helps.
-Kieu

Hi Kieu,
Perhaps you can try moving the webapp dir outside config/mydomain/applications.
The webapp should be configurable from anywhere besides the applications directory.
Any archives placed in the applications directory will be deployed automatically.
I'm not sure why you are seeing the webapp as an app below your Applications node
in the console though. Which version of wls are you using?
Vi
"Kieu Tram" <[email protected]> wrote:
>
I guess the problem happened because we can't deploy the exploded directory
format
using the console.
but when i follow the instruction in
http://e-docs.bea.com/wls/docs60/adminguide/config_web_app.html#122155
, to create
the web applications, i turned out the sub-dir "myWebApp" that i created
under
".\config\mydomain\applications" will appear in "Applications" node instead
of
under "Web Applications" node, even though i put all the "web.xml", "weblogic.xml"
under the dir "myWebApp\WEB-INF" already.
I would really appreciate your help...
thanks,
Kieu
"Kieu Tram" <[email protected]> wrote:
hello,
I'm trying to create a new web application ( under Deployments in console).
I
just manually create an sub-dir under ".\config\<active-domain>\applications"
directory, say WebAppDir. Then I went to the console and right-click
on the "Web
Applications" and select "Configure a new Web Application", then I filled
out
the Name, URI, and Path as follows:
Name: WebAppDir URI: WebAppDir Path: .\config\<active-domain>\applications
then click "Create" , I then got the following error message, I don't
know why
and what i did wrong... please let me know what did i do wrong ? I don't
have
any things under the new dir i created, but I thought i would be fine,
but it
didn't.
Here is the error message:
An unexpected error was encountered in processing your request.
Exception java.lang.NullPointerException at weblogic.management.console.pages._panels._mbean._webappcomponent._jspService(_webappcomponent.java:212)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:208)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1127)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1529)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137) atweblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Current Date Wed Jun 06 17:01:25 CDT 2001
thanks so much...i really appreciate your helps.
-Kieu

Why an organization require SSL for Shared Web Applications?

Hi
what is ssl and why an organization require SSL for Shared Web Applications?
adil

Hi adil,
Secure Socket Layer (SSL) is an encrypted communication protocol which uses encryption certificates. For more information about SSL in SharePoint, please refer to:
http://technet.microsoft.com/en-us/magazine/2009.09.insidesharepoint.aspx
http://technet.microsoft.com/en-us/library/cc262366(v=office.15).aspx
SSL is supported for server-to-server authentication and app authentication.
Regards,
Rebecca Tu
TechNet Community Support

Make a jar file availlable for all web application at deployement time

Hi !
Is there a way to make a jar file availlable to all web application included in a .ear file. I know that i can manually copy the jar under (OC4J_HOME)/j2ee/home/lib , but can i create a package that have those web application ( lets say 4 ) and also the common jar file, deploy the that .ear file and make my jar file automatically availlable for all the deployed web application ? or is there a special command that i can use to copy that jar to the (OC4J_HOME)/j2ee/home/lib while deploying the .ear file ?
i tried adding a manifest file with the classpath option but this seem to work only with jsp...
thanx for your audience...

Open the file %J2EE_HOME%/applcation-deployments/your-app/orion-application.xml. Add a tag like the one below:
<library path="location_of_my_library.jar" />
This will make the JAR availible to only your application, and the modules within it, and no others.
Rob Cole
Oracle

Where is security configuration for deployed web application stored

Similar Messages

Maybe you are looking for