Where is: settings, enable "editing (selection)" ???

I can't find the - enable "editing (selection)" box so that I can check it to enable group editing of multiple takes from 3 tracks.
Can anyone remind me where this- settings, enable "editing (selection)" can be found, I seem to have forgotten.

Bill,
Thank you very much, I just realized I had not opened the "group settings" which is where the
"Enable Editing Selection" is found. I got it working.
I just had a little trouble remembering what to do with "quick swiping" settings for each of the tracks you are multiple editing at once. You leave "quick swiping" On correct? otherwise you can't select the part of the waveform you are doing the comp edit on... correct?
Much thanks!

Similar Messages

HT3819 how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ?

Unable to save Word documents when accessing them directly from the site because the document never converts from a read-only even though the User chooses to enable editing

Issue has only popped up recently and cannot reproduce in a Test environment. Unaware of any SharePoint changes, so hoping someone can point me in the correct direction.
Previously Word document did not have to be physically checked out, but rather the editing of the doc also checked out the doc in a document library. This is the way we want it to remain –
no manual check-out process. Now if a doc is edited without being checked-out, there is an issue with the process as the application thinks the doc is read-only (message received when trying to save the doc) even if enable editing is selected. The
following message appears when you try to save the document:
This message can appear if you have been editing a file that was opened as read-only. A file opened as read-only will have (Read-Only) appended to the file name as it appears in the title bar of Word. You can still save the document, but you must
save it by using a different file name. If you use Windows Explorer to change the read-only properties of the file, while the file is open in Word, it will not enable Word to save the file. Word must open a non-read-only version of the file in order to save
it by using its original file name. If you have not made any changes to the file, you can close it, and then use the following steps to make the file writeable. 1. Click the File tab, and then click Open. 2. Browse to the file and right-click it. 3. Click
Properties, and then clear the Read-Only check box. 4. Reopen the file. If you have made changes to a read-only file, you can save it, and then use the following steps to give the modified file the original file name. 1. Click the File tab, and then click
Save As. 2. Enter a different file name, and then click Save. 3. NOTE: Adding "Rev1", or "Mod1" to the original file name may help you to remember it later. 4. Click the File tab, and then click Close. 5. Open Windows Explorer. 6. Browse
to the original read-only file. 7. Rename the read-only file. 8. Browse to the new file. 9. Rename the new file to the name of the original file. Do not delete the read-only file until after you have determined you no longer need it.
Previously, when check-out was optional, a file was checked out automatically when someone opened it for editing, unless it was already checked out. The editing commands notified the User that the file is being/was checked out. The real issue is the
word doc can no longer be saved as the application still believes the doc is read-only.

Hi,
According to your description, you give the domain admin full control over files on the old file server, but you cannot move the files to the new file server. After pull the files from the old to the new file server, the domain admin can only read the files
on the new file server.
How did you move the files from the old file server to the new file server? Did you setup replication between the two file server or use robocopy?
Please check the files permissions on the new file server to see if the permissions are changed, then share the folder on the new file server to everyone to see the result.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

When I open my contacts I do not have a choice to EDIT selected contacts. What can I do to fix this?

When I open my contacts I do not have a choice to EDIT selected contacts. What can I do to fix this?

Turn on iCloud in the settings.

How do I download a home DVD video disk (-R) to iMovie where I can then edit? I can download from a camera, but not from the disk.

How do I download a home DVD video disk (-R) to iMovie where I can then edit? I can download from a camera, but not from the disk.

iPhoto pulls off new videos from my iPhone 5 just fine. Does iPhoto automatically come up when you connect your iPhone? If it does, you should see your iPhone under "Devices" in iPhoto and then can select the videos to transfer (select, then Import Selected), though that should happen automatically.

Need multiple 'MAIL' Icons. Have two mail accounts and i want to keep them separate but want to EASILY switch back and forth from the main screen instead of going through, Settings, Mail, and selecting account. Major pain

Have two mail accounts and i want to keep them separate but want to EASILY switch back and forth from the main screen instead of going through, Settings, Mail, and selecting account. Major pain the butt. This has been a request from Apple users for many years. it's great you can now combine all emails into one, but some people want them kept separate and have separate icons on the main page. They could easily do this by having one "MAIL" account as white and another red. Or put MAIL 1 and MAIL 2. Or an actual label that the mail accounts are called on the ICONS!!
Help!

eshghoolak wrote:
...I could switch back and forth between accounts while in the mailbox, with one button. I think that is what you are referring to? Whoever said it's just a simple switching - you obviously haven't had the pleasure of using an Android device. It's not that quick to go back and forth - definitely not efficient...
Not that it matters a lot, Android vs iPhone interface is largely a matter of personal preference and what you know... I'm not sure which one you're saying is not efficient...
In any event...
I currently have two email accounts setup. My iPhone main page Mailbox settings reads:
Mailboxes
Inboxes
All Inboxes
Gmail
[email protected]
Accounts
Gmail
[email protected]
I wish there an efficient way to move back and forth while in the "Inbox" between accounts. Also, Why does one gmail account show as "Gmail" and another as the actually address?
The names are based on the names you gave the accounts when you set them up.
Settings>Mail, Contacts, Calendars.
Tap the account you want to re-name. Go to the "Description" field and put in what ever you want.
Second, there is no way to quickly choose a bunch of emails to delete. I have to manually go into each one and move it to the Trash folder.
If you tap the edit button in the upper right while in mail, you can select multiple items to move, delete or mark (flag).
I don't want any of the condescending remarks, that I've read here and in other forums. I'm honestly looking for a solution, which I think you are too! One thing I realized is that iPhone users in these forums are really defensive and quick to say "that's how it is, live with it, if you don't like it go away" Um...the only thing that tells me is you are pretty bitter and have kept telling yourself that, to force yourself to like your device. I prefer to express my issues, and find solutions. There is ALWAYS a solution...
I think what you will find is that many people here, myself included, tend to get a bit short with people who start off with attacks or whining about how something has been asked for for years and should be easy, rant about things that have already been beaten to death multiple times in the forums, talk about how much better Android or BB are at something (really... if it's that much better, why did they buy an iPhone to begin with?), etc., or continue to ask questions that could easily be answered with a simple search, or even just by looking back at the last dozen posts to the forum, half of which probably asked the EXACT SAME question.
I don't think any of us go out of our way to be rude or uncivil. That said, attacking the people who are attempting to help you is much more likely to generate a response of 'if you don't like it, go away', than it is to generate something that will be truly helpful.

Not able to select and copy from adf table in IE and chrome if we enable row selection

Hi All,
We have an adf table and user wants to select and copy table cell values.
We enabled row selection on adf table. Ifrow selection is in place, IE and Chrome are not allowing user to select and copy data. But Firefox is allowing.
Do we have any solution to this? For our customer IE is the standard browser and they do test app on IE.
Regards
PavanKumar

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.

After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.

I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

Where is the tool to select a portion of an image to crop?

I am new to PS cc 2014. Where is the tool to select a potion of an image to crop?

You'll find the Crop Tool on the Toolbar. It might be behind the Slice or Perspective Crop tool.
Photoshop Help | Crop and straighten photos
A small triangle on the tool icons denotes that other tools are located below.
Nancy O.

Problem in enabling the selection screen

Hi ,
I have problem in enabling the selection screen.
i have radio button and based on the radio button i need to make the date field as mandatory.
When i tried this with at selection screen on radio button group XXX, itu2019s not triggering.
Could you please help me by resolving the above problem?
Vijay

Hi,
see the sap documentation
... RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields. If a function code used in the GUI status of the selection screen is specified for fcode, the selection screen processing is affected accordingly.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
Regards,
Venkatesh

LSO Personalize search using settings - where are settings saved?

Hi,
One of our users have lost his settings link that you can see after having done a course search in LSO. I think he lost it because he ticked "Include Settings in Search" in the settings / personalization dialog.
I now need to find the backend table where theese settings are stored for the individual user but I'm having some trouble locating it. Can anyone help?
Br Jan

I found the table myself - it is called lsotptadds_c
Unfortunately it has no maintenance view

Just upped to ML and the Contact panel doesn't enable the selection buttons

Just upped to ML and the Contact panel doesn't enable the selection buttons.
To get my address selection to the e-mail it must be dragged and dropped.

Thanks sberman for reply,
No he hasn't. I've tested this with other contacs. If someone is already in my facebook cantacts and I receieve an email from him, but he hasn't included that email address in his facebook account, if I add this new email to his contact card, his picture frame will not appear in mail app. I can see his both facebook and other email address in the contact card.

TS1368 itunes and app store say cannot connect - I reset all the settings, enabled location services so the

I reset all the settings, enable location services so time and date would be auto, update iOS, re-entered network key - cannot connect to app store continues

You must not be connected to the internet via wifi.
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Delta field not enabled for selection in generic data source

Hi
I have created a generic data source for the table VBFA....and for the delta pick up i have put the delta option as CALDAY on the field ERDAT...and i have selected that field for the selection option. but after i made it delta enabled the selection option got disabled.
Now when i check the info package delta selection tab that date column is not apperaing.
But when i have to run the info package for the first i dont want all the data as it has a huge set of data.
I wanted to take only this months data.
So is there any option to be set to enable this selection in info package.
please suggest.
Regards
Shilpa

Hi there,
That's the stardard behaviour. If you use delta based om ERDAT, that field won't be available for selecting.
You could for example try to build a view over VBFA, and let the field ERDAT there and another field, for example ZERDAT (that is just another alias for ERDAT). Create the delta based onyour view over the field (ERDAT), but you can still control the restrictions over the extractore with your ZERDAT.
I don't know if this is possible, this is only an assumption.
Another option could be first to create an extractor based on the table VBFA but without delta, that field ERDAT would be available. Do your full data restricting it, and after that, change your datasource to use deltas based on ERDAT. It will be unavailable than, but since you've already loaded previous full data, you could than use your delta like it is. But here, remember, your deltas will bring new and change data based on ERDAT. If it brings delta based on changed data over ERDAT to a record that you didn't brought over your full (only some data), it will be incorrect records.
Also just an assumption, did not try it.
Diogo.

To enable multiple selection for tree view in web ui .

Hi Experts ,
We have requirement to add a multiple selection to a tree view in web ui for a standard view.
Component: BP_HIER
View: BP_HIER/EOVPHierarchyTreeV
Currently only single select is enabled for this view. I have added the following code in the HTMl page to multi selection.
selectionMode = "<%= AccountHierarchy->selection_mode %>"
<%--selectedRowIndexTable = "<%= AccountHierarchy->SELECTION_TAB %>"--%>
And in "DO_INIT_CONTEXT " method I have added the following code to enable multi select.
typed_context->accounthierarchy->set_selection_mode(
iv_selection_mode = cl_bsp_wd_context_node_tv=>selmode_multi.
But still multi selection is not working.
Let me know if any code changes are required in method "EH_ONSELECT" to enable multi selection.
Regards,
Shweta Nimje

Hi Shweta,
Why did you comment attribute selectedRowIndexTable? Uncomment and try again.
selectedRowIndexTable = "<%= AccountHierarchy->SELECTION_TAB %>"

Where is: settings, enable "editing (selection)" ???

Similar Messages

Maybe you are looking for