Where is siri in i phone 4, i upgrade ios 7
Where is siri in i phone 4 ... I upgrade ios 7 .. Siri is compatible for i phone 4
Siri has never been available for the iPhone 4, & upgrading to iOS 7.0 will not change that.
Similar Messages
-
Can't open mail on i phone 4s after upgrading to iOS 8.1
Can't open incoming mail on i phone 4s after upgrading iOS 8
Hello Cheri,
Thank you for using Apple Support Communities.
If you are unable to download photos from your iPhone. You can use the following article for suggestions to accomplish that task.
iOS: Unable to import photos to computer - Apple Support
Cheers,
Jeff D. -
I Downloaded IOS 6 To My IPad 2 Where is Siri and Passbook?
I m so upset where is Siri and passbook do i get it ? I just downloaded IOs 6 I should get it right I need it.
Siri is only available on the new iPad and Passbook is only available on the iPhone and the iPod Touch.
It would be quite cumbersome lugging the iPad around in order to use Passbook and I assume that is why it is not available on the iPad. It just doesn't make sense on a tablet.
iOS 6 features and capabilities vary between devices, with some features available only with certain devices and models.
iPhone
iPad
iPod touch
iOS 6 feature
3GS
4
4S
5
2nd
generation
3rd
generation
4th
generation
Maps: Flyover
✓
✓
✓
✓
Maps: Turn-by-turn1
✓
✓
✓4
✓4
Siri2
✓
✓
✓
Facebook integration
✓
✓
✓
✓
✓
✓
✓
Shared Photo Streams
✓
✓
✓
✓
✓
✓
✓
Passbook
✓
✓
✓
✓
✓
Camera: Panorama
✓
✓
Camera: Snap stills while recording
✓
FaceTime over cellular3
✓
✓
✓
Phone: Reply/Remind
✓
✓
✓
✓
Do Not Disturb
✓
✓
✓
✓
✓
✓
✓
Mail VIPs
✓
✓
✓
✓
✓
✓
✓
Safari: Full screen view
✓
✓
✓
✓
✓
Safari: Offline reading list
✓
✓
✓
✓
✓
Guided Access
✓
✓
✓
✓
✓
✓
✓
Made for iPhone hearing aids -
I want to have application Siri in my phone. Help me. Thanks you
Hello. I want to have an application Siri in my phone please. Help me please ! Thanks you so much
There is no Siri application, and Siri is not supported with an iPhone 4. You need a 4S or later.
-
I don't have siri on my phone do I need to download it or get it from the appstore? Or does it only come on the 16g phones or more? thank you!
Siri does come on ALL iphone 4S.It is a built in app on the phone. Although it not supported every country
Apple - iPhone 4S - Ask Siri to help you get things done.
www.apple.com/iphone/features/siri.htmlApple - Siri - Frequently Asked Questions
www.apple.com/iphone/features/siri-faq.html -
Can anyone tell me where to send my i phone to for repair?? I have paid by card on this site but been given no details as to what address it is to be sent . I am not a computer whizz but not an idiot either and i am becoming more and more frustrated !!!!!
Yes, AppleCare can tell you. Below is the number for AppleCare in the US.
1-800-APL-CARE *
1-800-275-2273
Hours of Operation: 7 days a week from 5am - 8pm Pacific time.
If you live outside the US, additional contact information can be found at this link.
http://support.apple.com/kb/he57 -
I just donwloaded iOS 6 on my iphone 4. Where is Siri?
I just downloaded iOS 6 on my iphone 4. Where is Siri?
You're welcome .
Sorry if you are disappointed. -
Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?
Warranty and Support are only valid in the country of origin. You will need to take the device to whatever country it originally came from.
Apple will not accept shipments from outside the country nor will they return it to an address outside the country. -
Hello, i lost my iphone5 32gb and i want to track it but the thing is that in my iphone5 i did not setup the find my iphone application :'( ...so, is there any option where i can track my phone or block it that nobody can use it..please help me out
Unfortunately if you did not set up 'Find My iPhone', there is no way to remotely track or wipe the device.
-
Where can I find what phone loads are compatible with CME?
I recently upgraded one of our CME systems to CME v10.0
I noticed that even though the CMEv10 Supported Firmware page says the compatible phone load for my 7911 phones is 9-2-1TH1-13,
my 7911's running phone load 8-4-3-16 all seem to be registering and running just fine.
So I must conclude that 7911 phone load 8-4-3-16 is compatible with CME v10.0
Where can I go to find out what phone load versions are compatible with CME or perhaps, at least, where I can find what phone loads are no longer supported by a version of CME?Hi Jared,
Specific CME versions are tested with the versions listed on the "requirements" doc like the one you mentioned (linked below), but are not limited to those firmware versions. The phone loads/firmware is completely independent from the CME/IOS version. And it is often appropriate to upgrade or downgrade phone firmware levels on CME and is fully supported :)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme10spc.html
I would look at upgrading the 8-4-3 firmware for the 7911's BUT you will need to move to an interim mid-point release like 8-5-2 as a first step due to the "important notes" shown here;
Firmware Upgrade Issues for SCCP
Note For all SCCP firmware upgrades from firmware release versions earlier than 8.3(3) to version 8.5(3) or greater, you must first upgrade your firmware to version 8.5(2). Once you have upgraded to version 8.5(2), you can upgrade your IP Phone to version 8.5(3) or later.
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_3/english/release/notes/7900_853.html#wp57602
Cheers!
Rob -
HI IN ABU DHABI WHERE MAKE SERVICES APPLE I PHONE 6?, HI IN ABU DHABI WHERE MAKE SERVICES APPLE I PHONE 6?
Check these two links:
contact your carrieror Apple. Note: There may be a fee for diagnostic service
or go to this page and choose your region under "Contact Support"
http://www.apple.com/support/iphone/contact/ -
Dear Sirs ,
my I phone 4 is limited to some network so i wanna make my I phone free to all networkes all over , how can i get the code to unblock itThere is no "code to unblock it". It can only be unlocked by the carrier it's locked to. Contact them and see if they offer that service and if you qualify.
-
Where can I find the phone menu icon used in the sample flyout menu tutorial?
Where can I find the phone menu icon used in the Muse phone menu flyout tutorial?
It is a .little box with an arrow on te left and three lines center/right.Hi
You can use the ones in Muse library :
http://muse.adobe.com/exchange-library/amphi-navigation-bars-by-qooqee-com-ali-pordeli
http://muse.adobe.com/exchange-library/harmony-animated-menu
Thanks,
Sanjit -
When i updated my ipod to ios 6 but i did not get siri or the phone.what should i do?
when i updated my ipod to ios 6 i did not get siri or the phone and i really wanted it.what should i do?
I'm sorry to say that Siri will work only on 5th generation iPods.
-
dear sir
i phone 4 16 gb ios 5.0.1
yesterday I started to upgrade ios 7 (almost 30 hr finish) but still this process completing only just blinking apple logo please give me some advise is it normal or ? its in hang?Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Maybe you are looking for
-
My Mac slowed after upgrading to Yosomite
Re: Yosemite made my MacBook Pro so slow. Need help.in response to hunttvillage Problem description: Since updating to Yosemite my MacPro has really slowed down also EtreCheck version: 2.0.11 (98) Report generated November 12, 2014 at 9:59:03 PM GMT+
-
Intermittent connection with netgear1000 and orange, please help
Hi there, I bought a mbp 2011 and installed orange broadband with netgear1000. I am having intermittent connection, anyone has an idea? Thanks for the help would be much appreciated. Lebake
-
Fedora Core 6 and ORACLE 10g Express Edition Problem
Hello I have to following problwm I have installed Oracle XE in a machine that has FC 6 I found that: 1. Oracle is well installed on server 2. Listener of Oracle is started (LSNRCTL) and doing status 3. The host is configured setting my IP so ther is
-
For all entries.... urgent Please respond !
I have to select data from one view and 2 tables viz. VF_KRED, ADRC, ADR6. I have written following code for select statement. but it is not working. Please tell the correct code. Select stceg stcd2 name1 ort01 pstlz land1 telf1 telfx brsch sperr lif
-
Hello, I am not sure that this is the correct place to put VB6 question or not, If not please suggest me correct one. My Question: Can any one explain me how INT function works internally for double type data in below case? Eg. Dim dblVal as Double