Where is System Center 2012 for download? I see Sp1 and R2

I have a DPM 2010 install that I am going to upgrade to 2012.
After doing a bunch of reading on here and other documentation,
a DPM 2010 -> 2012 in place upgrade is supported
but 2010 -> 2012 Sp1 or R2 is not supported.
Ok fine...Where the hell can i download the plain 2012?!?! i can't find for download on microsoft's site at all.
Can someone help me out with this?!?
Sp1 and R2 i can find all day long, i even find the 2010 eval version but the 2012 without sp1 is nowhere to be seen.

If you are planning to upgrade to 2012 R2, when doing the planning make sure your DPM Install is running on a atleast Server 2008 R2 with SP1, and that your SQL Server that is hosting the DPM Database is running atleast SQL Server 2008 R2
with SP2.
Also make note that if you bring DPM up to 2012 R2 you can for the time being not backup Server 2003 and Server 2008 operating systems.
Kind Regards,
Tobias

Similar Messages

FYI Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413) Stops SCVMM service starting

I just applied update:
Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413)
and (KB2965414) but it failed to install.
After a reboot I could not login to the VMM and the service would not start
An event id 0 was reported with:
Service cannot be started. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
   at System.Reflection.RuntimeModule.GetTypes()
   at System.Reflection.Assembly.GetTypes()
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
   at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
   at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
   at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)
   at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
After I removed the update the VMM was able to start, no reboot required.
When I have time I will try to apply both updates again successfully and see if the issue still occurs.
Vista Ultimate Dell XPS M1330

FYI. I've had the same issue after I installed Update Rollup 3 (KB2965413), seeing the exact same error on event log. Tried to start the service manually, getting service unable to start error. This is a machine running
with Windows Server 2012 Standard. Solution for me is simple. I just install
KB2965414 (Update Rollup 3 for SCVMM 2012 R2), reboot the server, and the SCVMM service auto start up by itself.

Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager

I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
All Protected servers updated and rebooted and continued protection - EXCEPT one;
Physical Windows Server 2012 R2 Datacenter.
Tried Manual install - no luck
Removed Protection Agent / rebooted / re-installed - no luck
Installed all updates / re-install - no luck
this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
or error status: 1603.
Any help would be greatly appreciated.

Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points

UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error

We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
"The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
Has any dealt with this issue successfully, or have any insight into the problem?

Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.

Password for the System Center 2012 R2 Orchestrator Evaluation VHD

I recently downloaded the Evaluation VHD for System Center 2012 R2 Orchestrator. After performing the initial setup, I am unable to log in with the credentials that i had provided initially for the Administrator. I faced a similar situation while working
with Evaluation VHD for System Center 2012 R2 App Controller. In that case, after some searches I found 'R2Preview!' as its default password. I have already tried other passwords - P@ssword1, P@ssword, p@ssword1, password1, blank password.
I hope someone can help me with this !

Sorry,
http://www.microsoft.com/en-us/download/details.aspx?id=39297:"For the
password type pass@word1"
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2

I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0

Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!!

How effective is System Center 2012 Endpoint Protection for Windows?

Hi,
Is there any thing out there that compares how effective System Center 2012 Endpoint Protection is compared to other AV / Malware solutions? I have read where MS Security Essentials comes up short of the level of protection compared to
other solutions.
Thanks Lance

Didn't mean to propose that MS love (yes we all know that you love MS Jason) post as an answer to your question.
Truth is SCEP may be good at how it works, it doesn't whine to users and it integrates to ConfigMgr. That's where it's good at. And I get Jason's point there, I'd just like to know what are those "other products" that haven't found the malware
when SCEP did? MS may gather telemetry, but so do all the other players.
There are several companies that do ONLY and ONLY AV products so they put their 100% effort in them, I don't think that AV is the business priority number 1 for MS.
Check this:
http://lifehacker.com/microsoft-admits-that-third-party-antivirus-is-more-eff-1441135677
And for your info Security Essentials uses the same AV engine that SCEP does.
If you want REAL protection, tested in the REAL world, I suggest you read some reviews of the products.
http://www.av-test.org/en/tests/corporate-user/windows-8/janfeb-2013/
http://chart.av-comparatives.org/chart1.php
--- ADVERT (I don't think it's illegal here, eh Jason?)
I'd go with F-Secure, it's not that expensive and you get some neat features like USB (or any other device for that matter) blocker. And yes, it can be configured to use individual USB sticks and so on..

How to access for Virtual machines in System Center 2012 r2 by remote console through code?

Hi All,
I am new in System Center. I am using System Center 2012 R2. I have a web application written by dot net, which shows the list of virtual machines created in the SCVMM. Now, I need to select a Virtual Machine from the list, and click a link named "console
access". This will allow the console access to the virtual machine. How can I perform this task?
Thanks in advance,
Moohak

The SCVMM VM console is an ActiveX application.
It is installed with the SCVMM Console application.
If you search around for the old SCVMM Self Service portal, you will discover how MSFT originally enabled this from a web front end.
If you look at Windows Azure Pack you will find a new pattern using RDP gateway.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

What is the alternative to TMG/ISA For SSL-Bridging-Capable Reverse Proxy For System Center 2012 R2 IBCM?

When I look up alternatives to TMG many other answers say something like "Don't worry about it. TMG 2010 is under support until 2020."
Well, we don't have TMG and can't buy it since it is off the market. Can it still be legitimately purchased through any resellers?
We need a reverse proxy that specifically supports SSL-Bridging so that device certificate authentication is not broken when the connection passes through the proxy.
Which reverse proxies that are currently on the market are known to work successfully with System Center Config Manager Internet-Based Client Management and also with other Microsoft products such as Lync 2010 and RD Gateway 2012 R2?
Do any Cisco ASA or ACE models support the required functionality for machine certificate authentication?
We have ISA 2006 licenses available, but I would hate to roll that out and then have to replace it in only 2 years rather than using something that can stay in place long term. Maybe we could use ISA 2006 temporarily as a stopgap if the next version
released of Windows Server Web Application Proxy would meet the requirements and can be deployed in production before ISA 2006 is completely EOL.
I hate that Microsoft keeps discontinuing all the related products to this before they have their replacements ready.

Hi,
You are correct, all TMG product sales officially ended in December 2012.
In addition, an ISA Server and a TS Gateway server can be used together to enhance security for remote connections to internal network resources. However, it
seems that ISA 2006 cannot support that on Windows Server 2012 R2. For more detailed information:
Configuring the TS Gateway ISA Server Scenario
Personally, Web application proxy would be an alternate. In addition, for the question related to Cisco product, you can contact Cisco for assistance.
Best regards,
Susie

Configuration issue on two items for system center 2012 config manager

My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
path is missing for SMSSetup\Bin\x64\ to execute
Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.

OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
As mentioned, each product has its own unique dependencies with no true overlap.
Jason | http://blog.configmgrftw.com

Update Rollup 8 for System Center 2012 SPM - DPM Error

Hi,
I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
I see there is a forum article for dpm 2012 Update Rollup 3 could not be installed, however nothing for Update 8.
Is the fix the same?
Thanks
Simon

Hi,
I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
I see there is a forum article for dpm 2012 Update Rollup 3 could not be installed, however nothing for Update 8.
Is the fix the same?
Thanks
Simon
Facing Exact same issue. Below is log:
MSI (s) (80:84) [00:37:39:482]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager - Update 'Microsoft Data Protection Manager 2010 Update - KB2991995' could not be installed. Error code 1603. Additional information is available in the log
file C:\Program Files\Microsoft System Center 2012\DPM\DPMLogs\DataProtectionManager-KB2991995.log.
=== Logging stopped: 3/9/2015 0:37:39 ===
MSI (s) (80:84) [00:37:39:482]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 1729
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.

Configure Web console for existing "System center 2012 configuration manager R2"

How to configure Web console for existing "System center 2012 configuration manager R2"

There is no web console in ConfigMgr 2012. If you want a web console you have to look at third-party products.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

System Center 2012 Error on Automatic Deployment Rule

Good day,
I have created and Automatic Deployment Rule to deploy my EndPoint Protection updates. So far, I have been able to deploy the agents, and the Antivirus to all my network computers. The problem I have is when the update rule runs. I have checked the SMSProv.log
file, and this I what I get:
Execute SQL =select all SMS_AutoDeployment.AutoDeploymentEnabled,SMS_AutoDeployment.AutoDeploymentID,SMS_AutoDeployment.SecurityKey,SMS_AutoDeployment.Description,SMS_AutoDeployment.LastErrorCode,SMS_AutoDeployment.LastErrorTime,SMS_AutoDeployment.LastRunTime,SMS_AutoDeployment.LocaleID,SMS_AutoDeployment.Name,SMS_AutoDeployment.Schedule
from vSMS_AutoDeployments AS SMS_AutoDeployment where SMS_AutoDeployment.AutoDeploymentID = 1
I am running System Center 2012 R2 on Windows Server 2012 R2. With this, I run SQL Server 2012 Sp1.
Thanks
Chris

Hi,
UpdatesHandler.log on the client records about the download and installation of software updates on the client.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem in the first run of "System Center 2012 R2 Operations Manager – Evaluation (VHD)"

Hi All,
I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
http://www.microsoft.com/en-us/download/details.aspx?id=40844
I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe to
rebuild the VHD file. I am using Windows Server 2012 Standard.
As indicated by the install instructions, I used “OM2012R2_VHDEval.docx"
to create the Virtual Machine to run Operations Manager. Problems:
1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be
able to run anyway?
2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop of the virtual machine, double-click the
Operations Manager Console folder. Operations Manager Console
folder provides access to different parts of Operations Manager. Double-click
Operations Console to open the Operations Manager console."
so I did click on the Operation Console icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program
Files" there is no System Center folder at all..?
Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
Thansk.
W.

Hi All,
I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
http://www.microsoft.com/en-us/download/details.aspx?id=40844
I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe to
rebuild the VHD file. I am using Windows Server 2012 Standard.
As indicated by the install instructions, I used “OM2012R2_VHDEval.docx" to create the Virtual Machine to run Operations Manager.
Problems:
1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be able
to run anyway?
2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop
of the virtual machine, double-click the Operations Manager Console folder.
Operations Manager Console folder
provides access to different parts of Operations Manager. Double-click Operations Console to
open the Operations Manager console." so I did click on the Operation Console
icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program Files" there is no System Center
folder at all..?
Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
Thansk.
W.

Where is System Center 2012 for download? I see Sp1 and R2

Similar Messages

Maybe you are looking for