Where is that new BIOS MSI?

I wish you hadn't said anything about the release date Bas . I can't sit still over here .

I have been lucky to be a beta user for testing the new bios version 1.25 but i dont recomend it. I have now gone back to version 1.10 as the other has sadly some strange readouts in temps and stability.
1. The vcore is added but still it does not work OK if you enable coolnquiet, because if
then you will end up with a 800mhz cpu in windows even if you have not enbled coolnquiet inside windows.
2. The tempreadouts is way to high, it jumps up from my 37c to 46c instead. It could be that they have throttled the tempreadings but i dont thinks so as the cpufan is still as cold as before.
3. After playing around with this bios for some weeks i have discovered at first some
performance gain but this probarly was a user error i dont know to 100% yet. Anyway as the new bios heats my cpu my performance drops after some hours of rendering or playing 3d games. This is when comparing the old bios with this beta.
4. Also to all who plans to hígher the vcore, you will probarly need a SUPER cooler to cool this baby down as the heat was really high only after highering it 0.5 step. But it could be a bios error i dont know. Lets give them time to complete the bios so it works 100%
BTW.
YOU DONT NEED TO HIGHER THE VCORE TO GIVE A PERFOMANCE GAIN WITH YOUR FSB ON THE MSI BOARD. BUT YOU NEED SOM GOOD RAMS TO MAKE IT RUN STABLE.
I RUN 100% STABLE WITH 2200MHZ THATS A 200MHZ OF INCREASE. THATS A GREAT INCREASE OF PERFORMANCE.
I RECOMEND ((CORSAIR XMS PRO 3200LL)) NOTE! ONLY THESE RAMS AS I HAVE NOT ANY GOOD RESULTS WITH OTHERS. DONT FORGET TO CRANK UP THE VOLTAGE OF THE RAMS TO V2.75 OR IF YOU NEED SET IT TO V2.85
DONT FORGET TO POST YOUR RESULTS OF TEMPRATURES: http://www.3degs.net/index.php?page=mbmcfg
NOTE! This was tested on my testrig.
PERSONAL MESSAGE TO BAS: Thanx you are doing a great work.

Similar Messages

NEW BIOS MSI ECLPISE SLI 7520v1A is a real BAD!!!!!!!!!!!!!!!!

Just tested new bios 7520v1A that is offered in the live update.
I also tested the beta versions of this bios and they where also bad.
Tested it with windows7 64bit and Vista 64 bit .
Windows won't load it just hangs on the start up screen.
If i resetted windows asked me to restore system because of hardware changes.
I went back to bios 7520v190 and problem solved , windows started normal.
So don't flash to the new bios , i raised the issue to MSI today so when i got the answer i will let you know what the response is to this problem.

Look at the reply i got from Msi ,
Dear Toms,
Sorry for any inconvenience. We tested your issue but we could not duplicate same problem, and please refer to our test configurations:
MB: 7520-010
Bios version: 1.a
CPU: i7 860
VGA: 2pcs N280GTX for SLI
Memory: PQI DDR3 1066 2GB (PQI38500-2048DB)
OS: win7 64bit
Now you said that you could reflash bios to version 1.9, so please continue this. If you still feel uncomfortable for this, you can contact your reseller to ask for a help.
Best regards,
MSI Technical Support Team
Posted: Nov 27, 2009 by MSI
Noticed the core i7 860 , and 2GB ddr3 dual channel.
I clearly told them what motherboard i 'm using , here is my post to msi
I checked , there is no sticker on the pci slots , but there is one yellow that says 010 i believe this is the ERP ( i include a picture) and the ECN=01.
So ERP=010 / ECN=01
I tried with one gtx280 and everything worked fine with bios 7520v1A. The moment i put the second gtx 280 in ,the problem returned.To let my sli work i need to go back to bios 7520v190.
Full detail of my system you find here http://www.guru3d.com/article/guru3d-rig-of-the-month-october-2009/ and the new one with water cooling here http://www.hardware.info/nl-NL/usersys/cnFxYp1hk2Sd/view/
Th link to the forum = https://forum-en.msi.com/index.php?topic=132469.0
and here https://forum-en.msi.com/index.php?topic=129919.40
So it seems that it has got something to do with sli. Hope you can fix it.
I like my msi eclipse board and my 2x gtx 280 MSI super oc gpu's.
Picture of start up screen , of motherboard.
Greetings Tom
Posted: Nov 19, 2009 by Tom Michiels
So what do i have got to think about this , they are testing with all diffirent system , good job MSI.

MOVED: Request;new bios msi 280x gaming

This topic has been moved to GAMING Graphics Cards.
https://forum-en.msi.com/index.php?topic=252081.0

Quote from: kimma.bergstrom on 04-January-15, 04:47:46
Bios : Not allowed to post external link, where should i send it ?
Upload it to some filehoster. If not allowed to post links yet, mask it by XX at beginning and end (e.g. XXlink.comXX)

The new bios for 875P neo ??????????

Where is it ? X( Where is the new Bios ? X( What's does MSI ? X(

You're telling me, I waited till 7am in the morning gaming while waiting. As of right now, no new bios, yeah MSI, what gives?...

Hi, where is the new event window in ical??

Hi, what I'm trying to do is to repeat an event every week for the rest of the year in ical, so I read one post which had a picture of the new event window pop up. Where is that new event window??? It doesn't pop up for me.
Here's what I do:
1. I click on File, then New Event.
2. A highlighted portion where I can write in text shows up, but then I don't know where the option to make the reminder a repeated reminder comes up.
I have Mac OS X Version 10.5.8, I believe.
Or...how do I jiust repeat an event without going to this?? I'd just like to repeant an event.
Any help??
Thanks in advance,
Bonnie

All right, never mind, I found it myself!!! You gotta double-click (press twice on mouse area) on the highlighted portion of the text that shows up on a date.
Thanks for reading this!!!
Bonnie

MSI give us a new bios that will work

Why dont you release a new bios the latest one is dated 15/8 thats 2 MONTH now. Corecenter make other program lockup, max Vcore is 1.5volt no matter what I set it in bios and corecenter (And I'm not the only one that have this problem), Where is the Agp/pci lock that you promised to release in 2 weeks for 2 weeks ago? Lucky me that I bought an k8v also because this bord aint gono OC anything with a Vcore that stuck on 1.5 volt.

I think asking for a new BIOS that will "work" is a misleading.. The one the board ships with is working perfectly except for those who overclock. Challange MSI to give you a real OCers beta BIOS this thread here might give some people the impression that the boards don't work at all when they work just great.
Simon

Challange to MSI.. New BIOS for the K8T that supports CoolNQuiet

MSI..
Lots of people are waiting. I hope that you will respond to this request soon. Asus already has theirs out!!?!?!
Simon

Quote
Originally posted by Bibihest
I just tried that beta BIOS, but it's not working for me at all... My speed is the same nomatter how long I wait.. Does anything else than CNQ need to be enabled in BIOS?? I don't think that Dynamic overclocking or anything else has to be enabled right??
Hope the next full bios will be out soon..
IT works. JUST read the faqs and you shuldnt have any problems.

MSI 975X Power Up Edition V2.1 Issue Beside Overclocking After Flash New Bios

Hi all,
I hope I can get a lot of help here. I'm having a few issues with this board. I cannot find any thread that discuss other issue beside overclocking after you flash a new bios. Here are my problem:
1. I installed fresh WindowsXP with SP2. Windows cannot detect new usb device eventhough WindowsXP recognized the usb controller. If I plugin any usb device, windows does not detect a new device. I try to stick a USB flash and I can see the light for a few seconds but Windows cannot detect it. Before I upgrade the bios to version 715 (beta), I used usb flash to upgraded it. Now, the bios is not even boot from usb flash.
2. Other things that concern me, the southbridge chipset is really really hot. If you touch it long enough, it will burn you.
3. I cannot figure it out the front audio from manual book (JAUD1). Is any of you know where the mic needs to go?
Thanks

I removed the Big Typhoon from the MB and I replace with stock fan. I want to make sure the back plate from Big Typhoon doesn't cause any problem. When I bootup the windows, I saw WindowsXP recognized the USB device but it disappeared again. I took the MB out from the case and test it without a case. It stills does not recognize the usb. Somebody mention bad PSU(Power Supply Unit) may cause a lot wierd problem. I changed PSU from RaidMax Vocalno 630W to Ultra X-Finity 500W. I don't have a lot of stuff that require power. Do you think the PSU cause this issue?
This is list of my comp:
MSI 975x Platinum PowerUp Edition V2.1
Conroe E6600 Retail
Seagate 300G SATAII
Maxtor 120G IDE 100
Asus 16X DVD-ROM
NEC 3550A DVD-RW
Ultra X-Finity 500W
120 mm Fan
80 mm Fan
Big Typhoon
FYI: USB Controller and USB 2 Controller are enabled in BIOS.

How do I get MSI to Send a New BIOS Chip? (EOM)

.

Hi Curbstone -
If you are in the United States, call their technical support number at (626) 581-3001. You'll have the best luck if you get through to a live person. My personal experience at getting a new BIOS chip out of their California Technical Support office was that voice mail messages left at technical support result in no response, e-mail message result in no response, faxed in problem report forms result in no response. When the line was personally answered, I had a new BIOS chip in hand three business days later, free of charge.
If you are elsewhere in the world, click on the Contact Us link at http://www.msi.com.tw .
Another option is to link to http://www.badflash.com and request they send you a replacement BIOS chip. Cost is US$20 plus shipping. It may be necessary to e-mail them the BIOS you wish to have flashed.
The following assumes that you have a K7N420 Pro board (you don't have a sig line to tell otherwise...):
If you know someone with an EPROM burner (or are friendly with a local electronics or computer store that has one) you can download the BIOS image of your choice and have it burned onto a new chip. The chip is either a Winbond 49F002UP12B or a SST 49LF020. The chip is a Plastic Leaded Chip Carrier (or PLCC) module. Shouldn't cost too much (maybe US$10 - 20). You can pull the PLCC module from your board carefully using a small jewelers screwdriver or use a PLCC Chip Puller from Radio Shack - part # 276-2101 (about US$8.).
Jef

Msi 865p/pe new bios out...

bios for msi 865p/pe board out already...just flashed bios for my 865p neo..so far so good...everything o.k... :D

be carefull...as i said my 865p bios come with a new AMI BIOS utility program "adsfi707" (i did check with one 865pe neo2 owner and his 865pe neo2 bios also come with the new AMI BIOS utility program)no more the "amifl827" thing. as i remind again for those first user, once you C: est>adsfi707 AxxxIMS.xxx...and "ENTER"...the flashing will start direct,you will see many >>>>>>>>>> be patient and wait for the flash programe to tell you that it has complete so far i knew a few 865p/pe owners had flashed the new bios with no problem...happy flashing... :D

MSI GTX 960 GAMING 100ME new BIOS

I’ve bought MSI GTX 960 GAMING 100ME and I have question about BIOS of this card. Some time ago MSI announced that the’re releasing a new BIOS for GTX 960 increases clock speeds. New default clock speed are set at 1241 MHz default (1190 MHz old), and boost closk are set at 1304 MHz against 1253 MHz old bios.
http://www.computerbase.de/2015-02/msi-geforce-gtx-960-gaming-erhaelt-neues-bios/
I got card with older version of bios and for now MSI has not yet provided the new BIOS file to download. I know that cards with new bios are in stores. Example:
http://www.hwbox.gr/content/369-msi-gtx-960-100-million-edition-review-page16.html
I know that I could use MSI Gaming APP which on OC Mode will give me 1241MHz and 1303 MHz at Boost. But I don’t like this software. I’m using LCD profile created by Spyder 3 Elite, and MSI Gamming APP disabling my profile, and I have load it up manually. So this software sucks.
So, when new bios will be available for download?

Sorry, cannot help to answer this
However: provide your current vBIOS (use GPUz to make copy of it) and S/N of the card.
Little GPUz guide:
Maybe Svet knows a bit more about this..
If he doesn't have latest vBIOS that was, apparently, announced by MSI, then you have to wait for their answer.

MSI P45 Neo (question about new bios v1.9)

Hi!
2009-04-03 MSI releasen new BIOS v1.9 to MSI P45 Neo
Fixed: - Disabled 5V USB function under S4/S5.
Tell me plz - what that mean ? It's very recommended update or not?
Many thanks!

If you have no problems with the BIOS Version you are currently using, there is no need to update the BIOS (and it is not recommended to do that either).
Quote
Tell me plz - what that mean ?
S4 - State = Hibernation
S5 - State = Shutdown-State
The BIOS Update should turn off the 5V power supply to the USB Ports when the system is shutdown (S5) or in Hibernation State (S4).

New Bios For MSI K8N Neo Platinum [ 1.55]

NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical Support

OMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least

New BIOS for MSI R290X Lightning

Hey. After some googling I learned that I need a new BIOS to control the fans etc with the Catalyst 14.4 driver.
My serial number is: 602-V307-04SB1402054122
Not sure what the difference is between GOP and UEFI bios though..? And which one of those I need. My current BIOS version is TV307MS.101. (Atleast that's what MSI Live Update 6 tells me)
Ohh, and here is a link to the BIOS I have right now. https ://www(dot)dropbox(dot)com/s/zvjrrog4c61y2oq/Hawaii.rom (Had to chop the link up a bit)
Thanks for all the help!

Your vbios is a legacy one which just supports bios legacy mode. A UEFI/GOP vbios supports UEFI mode of modern boards for ultra fast booting (but also supports legacy mode).
The latest UEFI/GOP vbios also fixes the fan control issue in Cat. 14.x. You can use the same and follow the directions in the following link: https://forum-en.msi.com/index.php?topic=180521.msg1298693#msg1298693

MSI P965 Neo motherboard New Bios version 1.7

Hi all,
I have notice that msi has release a new bios, version 1.7, for the p965 neo mobo. Has anybody tried it and has any info to share with us?
I want to upgrade but I am not sure if this is a good upgrade. Does anyone knows what is the "Intel Presler SL9QR CPU" fix so I choose to upgrade or not?
Thanks a lot,
Phanos

Quote from: Phanos on 02-April-07, 03:26:51
Hi all,
I have notice that msi has release a new bios, version 1.7, for the p965 neo mobo. Has anybody tried it and has any info to share with us?
I want to upgrade but I am not sure if this is a good upgrade. Does anyone knows what is the "Intel Presler SL9QR CPU" fix so I choose to upgrade or not?
Thanks a lot,
Phanos
create a sig, https://forum-en.msi.com/index.php?topic=25959.0
never flash a bios that includes updates that donot apply to you, NEVER.

Where is that new BIOS MSI?

Similar Messages

Maybe you are looking for