Where is the 64-bit Linux 12c agent??

We have a fresh clean install of 12c on a 32-bit Linux platform. I tried pushing out the agent (through 12c) to a host running 64-bit Linux. The remote agent install failed, as it would not take the 32-bit agent from the OMS host on the 64-bit remote host (the error message stated this).
I have tried both edelivery, and OTN, but neither has just the 12c (12.1) 64-bit Linux management agent (I was going to install manually, and then discover the hosts through the 12c OMS).
Where is the clean stand-alone version of the 12.1 management agent??
Thanks

Hi,
You can use (Setup > Extensibility ) Self Update to down load agent software.
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/self_update.htm#BEHBAGDB
Regards,
- Loc

Similar Messages

  • What/Where is the 32-bit version of Windows System Image Manager?

    I'm running into the problem described as follows in the WAIK documentation:  "Windows SIM fails to create a catalog for a 32-bit Windows image from a 64-bit version of Windows SIM. To workaround this issue, use the 32-bit version of Windows SIM to
    create catalogs for your Windows images."
    Question: Where is the 32-bit version of Windows SIM? I can only find a single download for "The Windows® Automated Installation Kit (AIK) for Windows® 7"
    Or are the 32-bit tools included in that version? If so, how do I use those instead?

    Hi,
    The issue should occurs when you install the WAIK on a 64bit Windows 7 machine.
    You need install WAIK on a 32bit machine.
    Different binary versions of Windows SIM cannot create catalog files for some Windows images of different architecture types. We recommend using the
    32-bit version of Windows SIM to create catalog files because this version can create catalogs for all Windows image architecture types. The following list describes the Windows SIM architecture types and catalogs that can be created for each Windows
    image architecture type.
    x86 Image Manager. Can
    create catalogs for x86, x64, and Itanium-based Windows images.
    x64 Image Manager. Can
    create catalogs only for x64 Windows images.
    Itanium-based Image Manager.
    Can create catalogs only for Itanium-based Windows images.
    This article may helpful to you:
    http://technet.microsoft.com/en-us/library/dd744249(WS.10).aspx
    Hope that helps.
    Regards,
    Leo  
    Huang
    Leo Huang
    TechNet Community Support

  • Where is the 64-bit download for AS oracle_proxy.so for 64-bit Solaris ?

    Hi, Experts,
    This is a cross-posting of
    Where is the 64-bit download for oracle_proxy.so for 64-bit Solaris ?
    (Forum Home » Application Server » Oracle Application Server - General )
    in the download forum.
    Where can I get a 64-bit version of this above file, oracle_proxy.so in downloads ?
    Walter

    Here's a download location:
    http://support.apple.com/kb/DL1577

  • Where are the 64-bit versions of Java?

    I tried to download the 64-bit version of JDK 5 off this site - but didn't find it. I've heard of 64-bit versions - where are they? I want a 16G heap, and the 32-bit version limits me to 1640M.

    > you click on Java SE from the first page,
    instead of clicking on any of the links offering
    downloads, you must click on "Supported System
    Configurations".
    Not so. For example, click on the "download" button
    next to "JDK 5.0 Update 9". Scroll down.
    Linux x64 Platform - J2SE(TM) Development Kit 5.0
    Update 9
    That's just an example.
    ~It's also not the only example. By going to java.sun.com -> downloads -> Java SE -> JDK 5 Update 9 there's also 64 bit versions for Solaris and Windows.

  • Where is the 64-bit download for oracle_proxy.so for 64-bit Solaris ?

    Hi, Experts,
    We tried to start the 64-bit Sun ONE web server in 64-bit Solaris env. with the Oracle AS plugin,
    oracle_proxy.so library. But then hit below error,
    [06/Jul/2011:15:44:13] failure (12345): CORE2253: Error running Init
    function load-modules: dlopen of /xyz/proxy/oracle_proxy.so failed (ld.so.1:
    webservd: fatal: /xyz/proxy/oracle_proxy.so:
    wrong ELF class: ELFCLASS32)
    We tried to search from
    http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
    Oracle 10gR3 Companion (10.1.3.x) CD
    And downloaded AS101330_companionCD_sparc64_disk1.cpio however the file
    is still 32 BIT file :
    xxxyyy$ file oracle_proxy.so
    oracle_proxy.so: ELF 32-bit MSB dynamic lib SPARC Version 1,
    dynamically linked, not stripped
    Where can I get a 64-bit version of this above file, oracle_proxy.so ?
    Walter

    Here's a download location:
    http://support.apple.com/kb/DL1577

  • Data Quality Services Installer script - Where is the 64 bit version

    Hi.
    I have Microsoft SQL Server 2012 - 11.0.2218.0 Enterprise Edition on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (WOW64) installed on my laptop. The Data Quality Services feature has been installed. When I try and run the DQS client it says I
    must run the DQS installer script. I therefore run the Data Quality Server Installer, which is the other option in the DQS menu, and it errors saying 'You are running 32-bit version of DQS installer on 64-bit OS'. I've looked for the 64-bit version but I can't
    find it. Any ideas where I can get it from?
    Thanks in advance for any help.

    iTunes 64bit version for Windows is somewhere in the future. Nice to see Apple is obviously doing something to remedy the issue.

  • Where is the 32-bit Bridge stored in SL?

    i am having huge problems since moving from10.5.8 9.1.5 to 10.6.8 9.1.7. A very well informed member of the SL forum is helping me try to sort out why my iMac screen locks in place when I open Logic pro to a project with EWQL Choirs,the EW stuff seems so badly done that they claim 3.0.37 is 64-bit but the bridge still opens and the screen is locked in place, I can move the mouse but clicking on anything has no effect,keyboard shortcuts are lockked[unavailable] too. I have been asked in the SL forum to remove the bridge to see if that is the cause of the locked screen, but I can't locate the bridge.Does anyone know where it is located IN SL?

    Thanks Pancenter, You are as always a fountain of good advice. I tried to install the 7Dev kit but got a message that my system did not need it, do you think that was correct,it refused to install it so I don't know what I could do to get it installed unless you can tell a secret way to do that.Would putting Logic in 32-bit mode fix that and allow me to install it?
    With help from the 10.6 forum I localised the problem to EW Choirs, a project with that in it was used in was the last thing I was working on before up grading to ****10.6.8. So it was the first project that opened when I opened Logic Pro 9.1.7,and we were not sure if it was the bridge which of course opened too or the bad software from EW that was causing the screen to lock up tight. After I trashed the trashy EW choirs stuff the iMac seems to be working as before, some things in 10.6 are even better: the mail inbox no longer needs 2 full minutes to find its way  from the external boot to the screen, Chrome deletes its search when I tell it to so I can check my gmail,Chrome gets very irritated because I never sign in-it keeps throwing pop ups "Sign in now or all your friends will wonder what you ate for breakfast!!",yeah right. Chrome has however no problem with my extentions to block cookies, JAVA and ads ,they even provide the apps for it. I suppose they figure I will eventually want to switch from Mac mail to gmail but it ain't happening. i am going to spend the needed time to learn Harmony Assistant and hope it can replace the EW choirs,at least with the Myriad software the screen doesn't lock up, and it has 5 or more languages that its singers can read, in EWChoirs you have to use amercan english and then try to figure out how that would sound when singing Italian using a Phonetic language.  The version I had was supposed to be 64-bit, in "more info" it said this app was x86-64-bit,whatever that means,I installed it 3 times but it always malfunctioned,big hassle and no consonants and practically no tech help, sometimes but very prone to petulance.
    As to your idea, I thank you for showing how to get rid of 32-bit plug ins and tell the developers they need to follow Apples law and switch to 64-bit. Open in 32-bit mode and trash any plug ins that aren't 64 bit. I had already checked and realized that most of the third party plug ins have Logic variants that would not need the bridge. Am I right about Logic's own FX? they would not need the 32-bit bridge would they? And since I am after simplicity and clear sounds I use subtractive eq-ing to remove unwanted noise instead of boosting up the volume of sounds I think should be more present, not logical, but thats me.

  • HT1926 where is the 64 bit insteller for itunes?

    cant install itunes states need to use a 64 bit installer ? where is it

    Do you get a 64-bit installer if you download from the the Apple website?
    http://www.apple.com/itunes/download/
    (The 32-bit installer is called iTunesSetup.exe. The 64-bit installer is called iTunes64Setup.exe.)

  • Where is the 64 bit version of Premiere Elements?

    I bought a teachers version of Premiere elements and Photoshop elements. I tried to download it to my 64 bit computer.  At no time during the download did there appear to be a choice of a 32 or 64 bit version.  Something downloaded but it won't install (?) because my computer is the wrong bit size?  Now when I go back to the serial number page, it says I have an invalid number.  I am not an IT person and I need someone to walk me through this.

    if you follow all 7 steps you can directly download a trial here:  Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • HT1338 where is the 64 bit download

    HOW DO I FIND THE 64 BIT VERSION OF I TUNES

    Welcome to Apple Support Communities
    You can download the 64-bit iTunes for Windows version in this website > http://support.apple.com/kb/dl1615
    Respecting to iTunes for Mac, OS X Mavericks comes with a 64-bit iTunes version

  • Where is the 64-bit version?

    It is a bit silly that there still doesn't seem to be a 64-bit version of Skype available for Linux. Do they even produce 32-bit hardware nowadays and are Windows only running 32-bit? What ever the reason - I do not care. I just want my install to be simple, stable and consistent. For my part that means that no other installed software on my computer demands 32-bit libraries. I KNOW how to move over to multiarch, but that is just a plain stupid move to do and even suggest that will show your lack of knowledge.

    I am facing the same problem....Skype for rhel 6.5 for 64 bit is not working...how could the support team remain silent..I have asked the same questions as you have mentioned accordingly many days back but still support time seems to be silent
    You can check my post from the following url http://community.skype.com/t5/Linux/Skype-for-Linux-64-Bit-Where-is-it/m-p/3705467
    ujjwal

  • Where is the 64 bit version of the 7.6.1 update

    i'm not able to find it with the standard itunes update.

    hi chris,
    definitively not! when i do a download with the itunes-update it the installation is canceled.
    when i try to download the files and install them manually i get the message that's the install file for a 32 bit system!!
    regards
    bernd

  • Where's the cascading bit of css gone in iWeb

    Seems a bit silly that there is no facility to make a change to a page and then have it cascade throughout your site (many many pages . . .)
    MassReplceIt is not really an answer.

    There is currently no method at all to do this in iWeb itself, so MassReplaceIt is but one of the external ways to do it easily (taking seconds with a few mouse clicks once you've set it all up).
    Michael
    iMac 20" Intel Core Duo 2GHz

  • 10.2.0.4 version of x86_64 bit linux agent?

    I am finding 10.2.0.4 patches for agent bugs but I don't find the 10.2.0.4 version of the 64 bit linux agent. Is it there somewhere and I am missing it? If you know how to get it, please send the url.
    thanks.

    This link is for 10.2.0.4 x86 Grid Control/agents, not for the agent on x86_64. I already have 10.2.0.4 Grid Control installed. I am looking for a patch to upgrade a 10.2.0.3 agent on x86_64 to 10.2.0.4, or, a standalone release of a 10.2.0.4 agent to run on x86_64. And besides all of that, I want one that officially supports RH5!
    thanks.

  • Can the webmaster fix mozilla's web site so that users don't end up with non working 32bit version of firefox on their 64 bit Linux (see bug #723487)?

    I've been subsribed to bug #723487 (https://bugzilla.mozilla.org/show_bug.cgi?id=723487) for a year and a half, and I identified a problem in the way mozilla's site delivers the linux version of firefox almost a year and a half ago, but for reasons unknown to me, no one bothered to address this problem.
    Other, properly built web sites that deliver binary software packages for linux, can successfully recognise if the user downloading firefox is using a 32bit or 64bit Linux distribution, and offer the appropriate version. Try www.libreoffice.org if you think that my claims are false.
    But this somehow doesn't work with mozillas website, the website recognizes that the user's operating system is Linux, but doesn't try to figure out if it's a 32bit or 64bit linux, so the users end up with 32bit builds of firefox by default, which then don't work on their 64bit sytems.
    The problem is even more intensified due to the rather stupid naming convention used by mozilla - both the 32 and the 64 bit versions are simply named identicaly - for instance firefox-29.0b6.tar.bz2 for the 29 beta 6 version. Other sane software producers (libreoffice, nvidia, qt-project) names their binary packages with different names (eg. the "x86" string is used for the 32bit version, "x64" for the 64bit version) so that the users don't end up trying to use (unsucsesfully; getting a cryptic error message) the wrong version. But in mozilla's case we end up with a lot of confused users filing bug reports, like the bug I mentioned above.
    So to rephrase my question - is someone willing to do something about this (the QA Mentor who commented in bug #723487 has so far proven to be completely useless)?

    The 64-bit Linux builds have been listed on the http://www.mozilla.org/en-US/firefox/all/ page since Firefox 27.0 or 26.0 I believe.
    This link is listed under the green download button with the words of [http://www.mozilla.org/en-US/firefox/all/ Systems & Languages]

Maybe you are looking for