Where is the actual paper width sensor? (Getting too narrow paper message.)I'm tech capable!

Getting "Paper too narrow" message.  What actually senses paper width?  Is it an optical sensor on the print head mechanism?  Sorry should have stated printer type.  It's an HP 2210xi all in one and it's been darn good until now.
David

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Similar Messages

  • Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits?

    Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits? Using iMac, OS X, most recent Aperture and Lightroom 5.7 with plugin for Aperture.

    Define "the Aperture files".
    Read this concise guide.
    The files you imported into an Aperture Library can be exported (at any time, and repeatedly) using the command "File ▹ Export ▹ Originals".  Your Originals are never altered.  What went in is what comes out.
    Adjustments and changes to the metadata that you made since creating an Image in Aperture by importing a file are saved to a text file.  This file is combined, on-the-fly, with the Original to create the Image that you see in Aperture.  There is no file saved to disk that is the full-size Image.  Thumbnails are saved, and Previews are saved.  These are JPG files, almost always smaller than the Original.  They are not substitutes for the Image for the use you have.
    When you need a file of an Image to use in another program, you export the Image from Aperture.  "Export" means "Make me a file of this Image according to these file specs I'm providing".  The way to get files of your adjusted Images is simple:  create them by exporting.  Specify "Original size", and use a loss-less image-file format (e.g. TIFF 16-bit) if you want to retain as much visual information as possible.
    Search the Web for information about transitioning from Aperture to Lightroom.  Note that I say "transitioning".  You cannot move a database from one format to another without significant changes, and likely some loss of information.  Adobe provides a tool and some instructions.  I strongly recommend working out the process step-by-step, and then proceeding with first a few Images, then a bushel-ful, and stopping to use the first few, the the bushel-ful, before committing your entire collection to the process.
    As always, never use any computer file without having a back-up.
    We have seen mixed reports here of the success of the LR tool that creates a LR database from your Aperture database.
    If you want to carefully define the process, and test and refine it, use the excellent process-development, analysis, and execution program inShort.
    Sadly, there is not and can never be a good, thorough re-positioning of the digital assets in your Aperture Library to become digital assets in a LR database.  Just as a metaphor for any user contemplating transitioning to another digital asset manager:  that would be like digging up a house in one country, planting it in a hole in another country, and expecting to be able to use the toilet and the sinks, turn on the lights, cook dinner, and sleep soundly.
    HTH,
    Kirby.

  • Where are the K7N2 Delta temps sensors located?

    Where are the K7N2 Delta temps sensors located?
    Okay I know one reads from the diode... altough the reading still seems to be low compared to other diode readers (like the 8K3A+ which gives you readins in the 50's).
    Where is the other one located?

    MSI Tech... how about it?

  • Where is the actual iPhoto photos data stored?

    I'm trying to find the data files for iPhoto in OS X Lion, data used to be in the user Library, but I can't find that either. Where is the actual iPhoto photos data stored?

    1. Set the preferences to edit in another program, Photoshop. (Advanced Tab)
    2. Drag the image to the email message (the problem you describe should be fixed in 10.8.3)
    3. Select all the images in the event or album and show the Info pane.
    4. You have to export them first in order to compress, so either drag them out of iPhoto into the destination or use the Export command.
    5. Clunky? Works pretty great for me.
    6. I can access all of my photos right there in iPhoto. I can access other people's photos there, too.
    If you don't want iPhoto to organize the files, tell it not to. Prefs, Advanced, Copy Items into the iPhoto Library.
    If you didn't want someone to comment on this,
    Seriously?  It is rediculous that we needed a forum to find our own files.
    Then why did you post it?
    Are you an Apple OS designer and are offended or something? Why are you even looking at this post if it's not an issue for you?
    Look up the thread a ways.

  • HT4972 Where is the actual iOS 5 update?

    Where is the actual IOS 5 update?

    THank you HunnyBun88; I must have missed something in that article. Thank you for answering me.
    Johnathan Burger's comment helped me the most. The IPad 'User Guide' spelled-out the
    ANswer: I hooked the iPad to my Mac computer, called up ITunes, found The Update tab,
    And ran Update (on the Mac) , but iTunes was already current.  Right away a button came
    UP that said Update your IPAD.  I ran that, and the IOS5.1.1 download began (from the
    mac to the iPad).  About an hour later the iPad was at IOS 5.1.1.
    Again, thank you all for helping me, and I look forward to returning the favor.
        Rich Sullivan

  • I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Can someone please help me get my iPhone to sync to your computer?
    I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • I want to copy and past 58 links from my IE favorites into the bookmarks toolbar...not one at a time. where's the folder i can copy these too?

    i want to copy and past 58 links from my IE favorites into the bookmarks toolbar...not one at a time. where's the folder i can copy these too?
    == This happened ==
    Not sure how often
    == i want to copy and past 58 links from my IE favorites into the bookmarks toolbar...not one at a time. where's the folder i can copy these too?

    Firefox doesn't store the bookmarks as separate files in a folder, but uses a sqlite database file with the name places.sqlite.
    You will have to export those favorites in IE to an HTML file and import that file in Firefox.
    Bookmarks > Organize Bookmarks > Import & Backup > Import HTML : "From File"
    See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • I have connected my time capsule to motorola SG6580 modem via ethernet.  I have a wireless network on the motorola and a wireless network from the time capsule.  I get duplicate IPs error messages sometimes. How do I fix?

    I have connected my time capsule to motorola SG6580 modem via ethernet.  I have a wireless network on the motorola and a wireless network from the time capsule.  I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs.  I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device.  I have been writing down all the devices and the IPs they have been using.  It happens more with PCs than Macs, ipads or iPhones.

    If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
    Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
    On your Mac, open AirPort Utility
    Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click the Network tab at the top of the next window
    Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
    Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
    If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

  • I have the interactive student mathematics CD from Haese & Harris Publications that requires Adobe Reader and includes a 'Self-help Tutor". I can open all the features using Adobe Reader except the Self-Tutor. I get a pop-up message saying I require an ap

    I have the interactive student mathematics CD for the Cambridge IGCSE Mathematics (0607) Extended from Haese & Harris Publications that requires Adobe Reader and includes a 'Self-help Tutor". I can open all the features using Adobe Reader except the Self-Tutor. I get a pop-up message saying that: I require an app to open "26Unitary Method.app". I can find no mention of this app online so can someone please help me?
    Thank you.

    Thank you for the prompt reply.  The CD says that it needs Adobe Reader (and it does read the 'Text book'), but it is not opening the interactive elements. Great!
    I am doing as you suggest and contacting Haese directly. Again, many thanks.

  • Hello! The scrollbars in Windows iTunes are too narrow for touch screen. How to make it wider?

    Hello! The scrollbars in Windows iTunes are too narrow for touch screen. How to make it wider?
    Jan

    Dear Experts,
    I Developed Screen-exit For IW51 t.codeTypically the custom fields are displayed in the notification on a separate tab, or at the bottom of the u201CGeneralu201D or u201CMainu201D tab.  These are configuration decisions that could be made in the build phase.
    Sets of custom fields need to be added based on the notification type.  The following table provides a list and details of the custom fields required.  The table to be extended is the VIQMEL table (to be verified by developer).
    Also to extend header fields on the notification you need to include them in the include CI_QMEL where OPEX M&I has already fields in.
    All fields should go on the notification header.  There are no custom fields on the task or activity level.
    All fields should be reviewed for consistency with the M&I design, specifically, Thomas Brothers, Atlas Sheet, district code. See Dale Alano.
    Please any Body Helped Coding For this, Already i Created Customfields , I design Subscreen also using Enhancement QQMA0001. Using Exit name EXIT_SAPMIWO0_008 USIN SUBSCREEN 0104 PLEASE ANY BODY help me Coding for this IW52
    Regards,
    Santosh Ballyapelli

  • Where are the actual documents stored in solution manager (KW)?

    Hello,
    I have a question regarding Solution Manager and storing documentation.
    When we in our process structure in a project uploads a word document
    (as documentation), where are the file then physically stored?
    I have checked the table SA01PHIO (a KW table), here I see a new entry every time I
    upload a new word document (or other type of documentation). But this
    table does not grow accordingly to the size of the word documents I
    upload, so the physical document must be stored somewhere else in the
    database.
    The description of field 'PHIO_ID' in table SA01PHIO is "Physical document", but since the field is of type char (size 32), then it can only be a link to the actual file?
    We need to know where the documents are stored, so that we can plan our
    storage strategy and database space management accordingly.
    Anyone knows where the files are stored in the database?
    Thanks in advance.
    Regards

    Samuli,
    Thank you for your help.
    After further searches, I have found exactly what I was looking for.
    Samuli, as you said, documents are stored in table SACONT01, but I did not understand how they were stored, as all the data you have in this table is something like:
    FF06010102028000343130320000000074040000121F9D02A37D7259692086C2F0D7761017222...
    So the information can be benefit to other people searching, I will share it here.
    The string of alpha-numeric characters you see above is a "part" of the document.
    Document data is cut into clusters, and stored in table SACONT01 (in field CLUSTD, coupled with CLUSTR).
    In order to retrieve all the clusters for a given document, you need to get its logical ID (LOIO - LOgical Information on Object):
    - Select the document (SOLAR01/02 for projects, SOLMAN_DIRECTORY for solutions)
    - Enter DOC_INFO in the transaction code field
    - Copy the Object ID
    In table SA01PHIO, retrieve the physical id(s) from the logical id (PHIO - PHysical Information on Object).
    Search SACONT01 with the physical id(s).
    Just as an example:
    - 340 entries for a Word document (about 50 pages)
    - 57000 entries for a video (200 MB)
    Hope it will help.
    Regards,
    Rémi.

  • Where is the actual Lyrics file found...?

    Hi:
    Where can I find the actual lyrics files for my iTunes songs that are brought up after I have pasted them into the Lyrics section of the Get Info box? The lyrics appear in the box with no problem as does the artwork, but I would like to link other files to them from applications such as Music Collector Pro for Mac so that I am not duplicating files. Thanks for taking the time to answer.

    Hello and Welcome to Apple Discussions ...
    I see your point but unfortunately, the lyrics are in the Get Info window only, to my knowledge at least. One thing you can do is send Apple feedback! Go here: http://www.apple.com/feedback/itunesapp.html
    Being pro-active and providing feedback really does help.
    Carolyn

  • Captured analog video, where does the actual captured file go?

    I am backing up old analog video 8 tapes to digital, using a Canopus ADVC-55 converter. The process is going just fine as far as I can tell, but I am sure I will have more questions as I get into this further. I am using FCP 6.04.
    As an initial test, I completed a Capture Now (non-controllable device selected) of a short 30 min. analog tape, using an older video 8 Sony Handicam, running through the Canopus interfacing with FCP. Primarily I want to run through all these old tapes (about 15 of them…) and back them up onto a dedicated Iomega external firewire drive, to retrieve for later use.
    Question du jour… Where the heck is the actual data file on the hard drive? Isn’t the file I see in the bin, from a result of the capture, just an alias pointing to the actual captured data file? The FCP document is only 24 KB, but I know the data file is much larger. I have searched the drive high and low but cannot locate it… Can anyone answer this? Also, I’ve read in discussions here about doing transfer to DV (I have a Canon digital camcorder I could use) rather than the hard drive… but if this is for backup purposes only, should that matter? And wouldn’t I lose a step of quality that way?

    I understand Kevan. For the time being, all I wanted to do was get these old 8 mm tapes backed up to digital format because I am afraid the tapes will degrade. They are about 12 years old. I also have some VHS cassettes that are much older that I plan to back up also.
    Eventually I would like to build some family movies and will use these files, but if you think I should be capturing into DV (I can use my Canon DV camcorder I guess) I will do that instead.
    Also, I will go ahead and define the folder so I can find the files more easily in the future.
    I sure appreciate that you are taking the time to answer these questions, thanks again.

  • Where are the actual files kept in iphoto

    I was wondering if anyone can help me as to where the actual files are kept for the iphoto library as when you look for them in Finder it just gives the iphoto library but when you click this then it just brings up the library not the individual files ?
    Help

    If you're looking for the photos for use outside of iPhoto read Terence Devlin's treatise on file access.
    OT

  • Where is the actual iTunes media located on my Mac?

    I never have enough storage on my mac air - this is ok as i have a hard drive
    My question is, where is the true itunes media, such as films and music located? is it in the itunes app, or is itunes just like a media player and the actual files (which take up the storage) are in the itunes media folder? or is there a copy in tunes and in the media folder as I always have double the amount of videos on my ma than i have initunes which i dont understand as i wiped my mac and only put films into itunes
    many thanks, Rhys

    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

Maybe you are looking for