WHERE IS THE BUNNY/ TURTLE SLIDER???

where is the bunny/ turtle slider in imovie 08? also, where is the clip/ timeline option?

Those sliders changes the number of frames per thumbnail shown in the Event and Project panes, they don't change playback speed
This slider in effect changes the "clip" mode into a pseudo "timeline" mode (by changing the time duration/number of frames contained in the thumbnail segment) which answers the second half of the originally posted question. As all of us know, there is no fast or slow motion feature built into iMovie '08 at this time.

Similar Messages

Where is the icon zoom slider in folders gone?

In SL on bottom right you found a slider to make icons bigger and smaller. I cannot find this feature in Lion.

In Finder, click on View > Show Status Bar.
Or type Command /

Where is the Rectangle Roundness slider?

I can't see it. I have created a Rounded Rectangle and this is its Properties panel:
Thanks in advance.

Groove25,
Looks like I had chosen the "Rounded Rectangle" rather than the "Rectangle" shape and the rounded rectangle's roundness can only be changed using the yellow diamond grips and not from the properties panel. But your reply was helpful too. Because I noticed clicking on that double arrow icon changes the extent of the available options in the properties panel.

Where is the volume slider in iTunes 12.0.1?

where is the volume slider in iTunes 12.0.1?

try dragging the corners to make the itunes window bigger .... the volume slider will show up

Where is the "allow objects on slide to layer with master" in Keynote 6??

Upgrading to Keynote 6 has broken my presentations. I had borders on the master slides, supposed to appear over any other content.
Now the content of the slides systematically goes over the master slide. I searched the web and found that in previous versions there was a "allow objects on slide to layer with master" option.
Where is it now?? Anyone has an idea?
Thanks

FYI, this is the error message I'm getting when opening the presentation. "Slide objects were moved in front of master objects"

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Same problem here on my 4s: Control center music controls do not work.
Since this thread has two issues, I'm going to start a new one with only the music control bug. Topic: iOS 7 Control Center Music Controls Not Working On iPhone 4s

Where is the Shuffle slide order button in iPhoto 6?

Where is the Shuffle slide order button in iPhoto 6? - I don't see one...
Click Settings at the top of the Slideshow dialog to set one or more of the following options:
** where is this button? ****---> Select "Shuffle slide order" to play slides in random order.

Rev:
In iPhoto 6 there is no Shuffle option in the slideshow mode. However, if you select an album or a number of photos in the library and use the Play button in the toolbar at the bottom there will be a Shuffle option in the Settings window. That's the only place you'll be able to shuffle the slides.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Where is the opacity slider in the color picker?

Where has the opacity slider gone in the color picker? It used to be underneath the color wheel.
[Edited to correct spelling error.]

Based on some reading of related discussions, and some experimentation on my own system, it looks like the opacity slider only appears in some contexts and programs. For instance, it doesn't show up when I am choosing a font colour in Word 2011 or TextEdit. It does show up when I am choosing a font colour in Omnigraffle.
Some other articles seemed to suggest it was related to whether there was a background behind whatever the colour was being set on - perhaps that makes sense as opacity only affects whether you can see through something, and if there's nothing to see behind it perhaps it is sometimes thought to serve no purpose? Perhaps it only works when the program chooses to support it? Searching Word help for "opacity" returns no results, for instance.
Hope that helps.
Ivan

PSE8 for Mac. Where is the slide show option in the Mac version?

I just watched an Adobe TV video on how to do a slide show in PSE8, but when I go to my CREATE tab, the only slide show option is "PDF Slide Show" and when I click it, it bounces me back to Adobe Bridge and gives me a very limited set of Playback options and then produces a PDF document and not a slide show. Where is the Create Slide Show in the Mac version of PSE8?

Hello,
The not-so-satisfactory answer is that, that's all there is: the pdf slideshow file is output from Bridge and plays (in my case) with Adobe Acrobat. That is, Adobe Reader will also open the pdf and play / progress at whatever time interval is selected with the Bridge pdf maker controls.
I agree: that you have to start by selecting the pdf creation in Pse 8 -which then bounces you to Bridge - is quite unintuitive. I'm just supposing that, since Bridge is literally the "bridge" to this process, it made sense to follow this logic when creating the Pse / Bridge software.

Mouse FLIES out of no where on the next slide!!!!

So if one of my slides has a little video camera next to it.
on the next slide the Mouse flies out of the top right of the screen!!!

To FIX this.
Show mouse (an additional mouse) on the previous (video) slide.
Move this mouse to the appropriate area it should be for the next slide.
HIDE this mouse on this previous (video) slide..
--Makes no sense to me.. my wonder colleague discovered this trick!!!!

Whilst playing a selection from a CD I've put in my CD drive, I select Controls and then wish to increase the volume. It tells me to Press Control and then Up. Where is the Up button please ? Thank you.

My question is how do I increase the volume when playing a CD in iTunes. The volume slide is at full, but when I press Controls, it tells me to press Control and UP. Where is the UP on my PC or is it on the screen ??
Thank you.

It means the UP arrow on your keyboard. Depending on your keyboard, it is usually located on the right hand side of the keyboard, either with the numbers keys or below the Enter (Return) key.
However, Control/Up will simply attempt to move the slider in your iTunes programme further up. If the slider is already at the top, then those keys will have no effect, since the iTunes volume is already at maximum. Perhaps your computer's volume controls need adjusting.
In Windows XP, I believe (if I recall correctly) that the volume control is in Start/Accessories/ and either Volume or Mixer. In Windows 7, it's in Start/Control Panel/Hardware and Sound/Adjust Sytem Volume.

Where is the mute button on a MacBook? Thanks.

Where is the mute button on a MacBook? I see F10, F11 and F12, but when I push each, nothing happens when I'm in iPhoto running a slide show and trying to turn the volume down. (I now understand how to mute the music...just have to be sure to punch "set as default" after un-checking the play music button.

Please continue the original conversation rather than starting multiple threads on the same topic. Otherwise it clutters up the forums.

Where has the File Sharing page gone to in iTunes 11?

Where has the File Sharing page gone to in iTunes 11?

My iPad is a first generation so it on IOS 5 and I am running iTunes 11. Shows up for me as I said above. Maybe somebody else knows whay it doesn't work for you.
Probably try all the usual suspects Power on and Off for ipad 9 Not Standby, hold down Power button until a red slider appears. The when off keep it pressed for 2-3 secs and iPad will reboot.
Also switch of iTunes and Computer and the switch back on.
Never know it might help certainly wouldn't hurt

Where is the printer configuration info stored?

I need to configure printing for a whole lab, and while I can configure an individual machine for one user via the Print/Fax option of System prefs, I can't find where all that info gets stored (some of it is in ~/Library/Preferences/com.apple.PrintingPrefs.plist, but not all) and I can't figure out how to slide that in as a whole-system configuration. Where is the per-user information stored, and where can I move it so that it applies system-wide?

The printer queues are global so most of the information is not kept under any particular user. The path you mentioned keeps user relevant information, such as Presets.
If the printers are using files that are included with 10.5, then the majority of compressed driver files are kept in ./Libary/Printers/Vendor or ./Library/Printers/PPDs/Contents/Resources/en.lproj for PostScript PPDs.
When you add a printer queue, some of the information is kept in ./etc/cups. This includes the printers.conf file which has details about the added printer queues and the decompressed PPD that was selected during the queue creation.
So if you are looking at copying the data from one Mac to reduce your setup on all the other Mac's, then you may have to tell us the make and model, as there could also be a number of additional directories/files you need.
PaHu

Where is the fade in docs

Where is the documentation for fading in and fading out
several pictures?
How do you expect a beginner to learn anything with this
flash and no howto's to do something simple?

F1 (help) and type in Motion Tween or Animation in search
field - you need to learn how to convert
things to symbols and create keyframes and then apply a
motion tween with 0% alpha.
it is very easy and basic once you know how.
1. import image to stage - select it and hit F8 (convert to
symbol) - select "graphic or Movie clip
for type of symbol.
2. Further down the timeline click on a frame and hit F6
(create keyframe).
3. go back to frame 1 and click once on the symbol (your
bitmap on stage).
4. in the Properties Panel adjust the alpha to 0% using the
slider.
5. Select any frame in between these 2 keyframes and in
Properties panel select Motion Tween from
the Tween drop down.
This is just 1 way of doing this - in flash, there are always
several ways of doing this depending
on your needs - you can use action script to control this
effect dynamically as well. Google around
for tutorials - www.kirupa.com has a lot of good ones.
www.gotoandlearn.com is another great
resource. This forum is a great resource - it is how i
learned early on and continue to learn. Flash
takes time - it is not for the consumer-level dabbler when it
comes to graphics and animations. it
has become more or less a development platform.
Hang in there - someday it will *click*.
-c
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
modom wrote:
>
> Where is the documentation for fading in and fading out
several pictures?
>
> How do you expect a beginner to learn anything with this
flash and no howto's to do something simple?

WHERE IS THE BUNNY/ TURTLE SLIDER???

Similar Messages

Maybe you are looking for